Scribd Logo
Upload

Welcome to Scribd!

  • 874 views

    JSA For Installation of Out Door Units

    Uploaded by

    Mohammed Minhaj
    This JSA document provides safety guidance for installing outdoor split air conditioning units at a new project living container site. The key steps include: 1) Mobilizing workers, tools, and equipment safely to the site. 2) Conducting the installation work at height, which requires fall protection such as scaffolding inspected by a competent person and fall arrest systems. 3) Installing the outdoor AC units. 4) Demobilizing safely from the site. Contingency plans include having first aid kits on site and designating HSE personnel as the first emergency responders. The JSA will be reviewed after work is completed to note any hazards and ensure lessons learned are captured.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    JSA For Installation of Out Door Units

    Uploaded by

    Mohammed Minhaj
    874 views4 pages
    This JSA document provides safety guidance for installing outdoor split air conditioning units at a new project living container site. The key steps include: 1) Mobilizing workers, tools, and equipment safely to the site. 2) Conducting the installation work at height, which requires fall protection such as scaffolding inspected by a competent person and fall arrest systems. 3) Installing the outdoor AC units. 4) Demobilizing safely from the site. Contingency plans include having first aid kits on site and designating HSE personnel as the first emergency responders. The JSA will be reviewed after work is completed to note any hazards and ensure lessons learned are captured.

    Original Title

    JSA for installation of out door units.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This JSA document provides safety guidance for installing outdoor split air conditioning units at a new project living container site. The key steps include: 1) Mobilizing workers, tools, and equipment safely to the site. 2) Conducting the installation work at height, which requires fall protection such as scaffolding inspected by a competent person and fall arrest systems. 3) Installing the outdoor AC units. 4) Demobilizing safely from the site. Contingency plans include having first aid kits on site and designating HSE personnel as the first emergency responders. The JSA will be reviewed after work is completed to note any hazards and ensure lessons learned are captured.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    874 views4 pages

    JSA For Installation of Out Door Units

    Uploaded by

    Mohammed Minhaj
    This JSA document provides safety guidance for installing outdoor split air conditioning units at a new project living container site. The key steps include: 1) Mobilizing workers, tools, and equipment safely to the site. 2) Conducting the installation work at height, which requires fall protection such as scaffolding inspected by a competent person and fall arrest systems. 3) Installing the outdoor AC units. 4) Demobilizing safely from the site. Contingency plans include having first aid kits on site and designating HSE personnel as the first emergency responders. The JSA will be reviewed after work is completed to note any hazards and ensure lessons learned are captured.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 4
    At a glance
    Powered by AI
    The key takeaways from the document are job safety analysis procedures for installation of outdoor AC units including potential hazards and controls at different job steps.

    Potential hazards of working at height mentioned are falling from height and falling of materials.

    Controls mentioned for working at height are using approved scaffolding, inspection of scaffolding, using safe access, wearing fall protection equipment like harness, restricting access and establishing drop zones.

    f _____

    JOB TITLE / AIM: JSA for Installation of outdoor units of split ACs in new project living container at PSS camp.
    JSA DATE: 10/11/2006 JSA NO./ REVISION:
    SUPERVISOR/ JSA LEADER: Selah- u -din SCRIBE: Masood Memon
    PARTICIPANTS; Zahid, Asad najeeb
    LIST ASSOCIATED PROCEDURES/WORK INSTRUCTIONS OR TEMPORARY WIs:
    Attach copies of any relevant documentation/ drawings.
    Part 2: Job Safety Analysis
    Job Steps: List the main sequential steps. Each step should accomplish a specific component of the task.

    1- Mobilization of workers, tools & Equipment


    2- Working at Height
    3- Installation of outdoor units of split ACs
    4- Demobilization

    Alternatives Considered: What are other possible means of achieving the job outcome?

    Now undertake the JSA and record in the table below. Use prompts on JSA Prompt Sheet and Hazard Checklist PA-HSEC-02-040-002-F03.
    Part 3: Contingency Plans. Standard PPE, S: First aid kit must be present at the area and the HSE personnel is the first response in case of
    emergency

    Part 4: Review. After the job has been completed, JSA leader should note: any hazards, which were identified in the original JSA? Any practices
    that need to be captured in the OMS? List action items, changes, and transfer any changes to the Change Management system.
    File: 10.30
    JSA No: JOB TITLE:
    Step Describe Job Step Potential Hazards Hazard Controls
    No (Copy from part 2 of form) (Use Hazard Checklist)
    1 Mobilization of equipment and Unauthorised equipment/tools brought to site Before mobilizing any equipment/tools make sure
    workers that the equipment is inspected.
    All the hand tools must be colour coded prior to
    mobilization.
    Uninducted person mobilization on site Prior to work all worker must be inducted DEL &
    BHPB
    Workers starting the job without permit JSA must be in place prior to work. Ensure all the
    persons take part in the toolbox meeting
    discussion. JSA was discussed to workers and
    signed at the back.
    2 Working at height Working at height/person falling 1- Ensure persons only stand on
    approved scaffold plat form erected
    around perimeter building
    2- Scaffold shall be inspected by
    competent person immediately prior
    to use
    3- Scaffold contain, sill sole bolt, base
    plate, braces toe board, complete plat
    form with secured planks, mid rail&
    top rail.
    4- Ensure stand by vehicle available at
    area at the all time
    5- Ensure persons of mind during lift
    activity
    6- All persons to have green card for
    working at height. Only current
    green-tagged scaffold can be
    accessed.
    Use of shortcut access Always every person shall use safe access of
    JSA No: JOB TITLE:
    Step Describe Job Step Potential Hazards Hazard Controls
    No (Copy from part 2 of form) (Use Hazard Checklist)
    scaffold.
    Poor house keeping Keep good house keeping as to save falling and
    tripping hazards by proper training to personnel by
    toolbox talk.
    Unskilled workers worked on scaffold Competent / trained worker participate this
    activity.
    Workers will be aware about such activity by
    conducted toolbox talk.
    Worker carry green ID card with stamp.
    Worker shall not allow work at height without
    green card.

    Heat Stress/Exhaustion Ensure potable water/sufficient shelter is available


    in each area where workers are doing the job. First
    aid kit available at site.
    Tripping Hazards Ensure drop zones are in place at the all times
    Ensure that the materials shall be placed in proper
    location that it will not create tripping hazards
    Ensure that drop zone shall be established to
    manage the hauling of the materials and restrict
    access
    Ensure that area at bottom of the scaffold is drive
    Fall of workers and materials For purpose of decent & ascent will be use scaffold
    safe access.
    Ensure that the materials shall be place in proper
    location that it will not create tripping hazards.
    Ensure that a drop zone shall be established to
    manage the hauling of the materials and restrict
    access.
    Ensure that the area at bottom of the scaffold is
    JSA No: JOB TITLE:
    Step Describe Job Step Potential Hazards Hazard Controls
    No (Copy from part 2 of form) (Use Hazard Checklist)
    drive.
    Unwounded material used Sound material shall be used and inspected prior to
    use
    Unbalance surface of post stand Scaffold shall be erected proper balance, levelling
    and smooth surface.
    3 Installation of outdoor units of split Hand Injury Ensure proper hauling of materials/get help if
    ACs required/Wear hand gloves.
    Heat Stress/Exhaustion Ensure potable water/sufficient shelter is available
    in each area where workers are doing the job. First
    aid kit available at site
    Loose Clothing No loose clothing/scarf shall be worn at site

    Dust Wear dust mast

    Work start without PPE’s Prior to work all PPE’s must be wear

    Workers starting the job unfit to work All personnel not fit to work shall not be allowed
    to work at the project site

    4 Demobilization Poor house keeping Housekeeping shall be conducted after completing


    the job, and area must be clean

    You might also like