Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Jsa For Applying Bituminous Roof Treatment On Buildings

    Uploaded by

    Mohammed Minhaj
    Applying bituminous roof treatment involves several steps with potential hazards: 1) Mobilizing requires ensuring all workers are properly inducted and only authorized equipment is used. 2) Cleaning the roof risks hand and back injuries without proper handling of materials and use of PPE. 3) Heating bitumen near buildings risks fire without extinguishers and a fire watcher present. 4) Applying primer and asphalt risks spills and inhalation without following MSDS, using buckets carefully, and wearing gumshoes and respirators. 5) Work at height poses fall risks without certified scaffolding and fall protection. Proper controls are needed at each step.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    Jsa For Applying Bituminous Roof Treatment On Buildings

    Uploaded by

    Mohammed Minhaj
    1K views3 pages
    Applying bituminous roof treatment involves several steps with potential hazards: 1) Mobilizing requires ensuring all workers are properly inducted and only authorized equipment is used. 2) Cleaning the roof risks hand and back injuries without proper handling of materials and use of PPE. 3) Heating bitumen near buildings risks fire without extinguishers and a fire watcher present. 4) Applying primer and asphalt risks spills and inhalation without following MSDS, using buckets carefully, and wearing gumshoes and respirators. 5) Work at height poses fall risks without certified scaffolding and fall protection. Proper controls are needed at each step.

    Original Title

    Jsa For applying bituminous roof treatment on buildings.doc

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Applying bituminous roof treatment involves several steps with potential hazards: 1) Mobilizing requires ensuring all workers are properly inducted and only authorized equipment is used. 2) Cleaning the roof risks hand and back injuries without proper handling of materials and use of PPE. 3) Heating bitumen near buildings risks fire without extinguishers and a fire watcher present. 4) Applying primer and asphalt risks spills and inhalation without following MSDS, using buckets carefully, and wearing gumshoes and respirators. 5) Work at height poses fall risks without certified scaffolding and fall protection. Proper controls are needed at each step.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    1K views3 pages

    Jsa For Applying Bituminous Roof Treatment On Buildings

    Uploaded by

    Mohammed Minhaj
    Applying bituminous roof treatment involves several steps with potential hazards: 1) Mobilizing requires ensuring all workers are properly inducted and only authorized equipment is used. 2) Cleaning the roof risks hand and back injuries without proper handling of materials and use of PPE. 3) Heating bitumen near buildings risks fire without extinguishers and a fire watcher present. 4) Applying primer and asphalt risks spills and inhalation without following MSDS, using buckets carefully, and wearing gumshoes and respirators. 5) Work at height poses fall risks without certified scaffolding and fall protection. Proper controls are needed at each step.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 3
    At a glance
    Powered by AI
    The document describes a Job Safety Analysis (JSA) for applying bituminous roof treatment on buildings. It identifies potential hazards and controls at each step of the process.

    Potential hazards identified during mobilization include using unauthorized equipment/tools, unskilled or uninducted personnel starting work, and workers starting in an unfit state. Controls include inspecting equipment, ensuring training and fitness for work.

    Precautions during heating of bitumen near the accommodation block include having a fire extinguisher and first aid kit available, taking proper care while handling bitumen, and having a fire watcher stationed.

    f _____

    JOB TITLE / AIM: Jsa For applying bituminous roof treatment on buildings
    JSA DATE: 21/02/2007 JSA NO./ REVISION:
    SUPERVISOR/ JSA LEADER: Zahid Masood SCRIBE: Abdullah Khan
    PARTICIPANTS: Aghas Saeed , Muhammad Ramzan
    LIST ASSOCIATED PROCEDURES/WORK INSTRUCTIONS OR TEMPORARY WIs:
    Attach copies of any relevant documentation/ drawings.
    Part 2: Job Safety Analysis
    Job Steps:
    1.Mobilization of tools workers and equipments
    2.Cleaning of roof surface
    3.Heating bitumen near block C
    4.Applying primer coat, asphalt bitumen flood, and lying of jute felt on to bituminous coat.
    5.Sprinkling of PEA Gravel
    6.Demobilization

    Now undertake the JSA and record in the table below. Use prompts on JSA Prompt Sheet and Hazard Checklist PA-HSEC-02-040-002-F03.
    Part 3: Contingency Plans. Standard PPE,S : First aid kit must be present at the area and the HSE personnel is the first response in case of
    emergency

    Part 4: Review. After the job has been completed, JSA leader should note: any hazards, which were identified in the original JSA? Any practices
    that need to be captured in the OMS? List action items, changes, and transfer any changes to the Change Management system.

    File: 10.30
    JSA No: JOB TITLE:
    Step Describe Job Step Potential Hazards Hazard Controls
    No (Copy from part 2 of form) (Use Hazard Checklist)
    1 Mobilization of workers, equipments Unauthorised equipment/tools brought to site Before mobilizing any equipment/tools make sure
    and tools that the E &P Personnel got inspected the
    equipment.
    All the hand tools must be colour coded prior to
    mobilization.
    Unskilled and uninducted personnel starting Ensure that all personnel prior to start the have
    the job been inducted and oriented about the hazard in the
    job site
    Workers starting the job unfit to work All personnel not fit to work shall not be allowed
    to work at the project site.
    Workers starting the job without JSA Prior to work all participants of activity must be
    Participant toolbox meeting discussion. Persons
    signed at the back of JSA

    2 Cleaning of roof surface Hand Injury Ensure proper hauling of materials/get help if
    required/Wear leather gloves
    Back Injury Ensure workers/operators properly inducted about
    the proper positioning
    Ensure workers are complying with the min. PPE
    req. Safety shoes, helmet, safety glass, and dust
    mask.
    Dust Wear dust mask at all times.

    3 Heating bitumen near Fire  Fire extinguisher shall be in place


    Accommodation block C  First aid box shall be present
     Proper care shall be taken while handling
    the bitumen.
     DEL fire watcher shall be stationed as fire
    watch man
    4 Applying primer coat, asphalt MSDS  MSDS shall be attached with the JSA and
    JSA No: JOB TITLE:
    Step Describe Job Step Potential Hazards Hazard Controls
    No (Copy from part 2 of form) (Use Hazard Checklist)
    bitumen flood, and lying of jute felt all the instructions to be followed.
    on to bituminous coat.
    Spillage of Bitumen o Bucket shall not be filled full. While
    transporting it to the top.
    o Slow movement shall be maintained
    (No haste work)
    o Gumshoes shall be worn.
    o Wood spreader shall be used while
    spreading of hot bitumen.
    5 Sprinkling of sand Dust Dust mask shall be worn at all times.

    6 Work at height Fall of person  Certified and approved platform shall be


    used
     Green card shall be worn
     No stacking of materials on to the scaffold.
    7 Demobilization Same Proper house keeping shall be done prior to
    demobilization

    You might also like