SIEMENS

Teamcenter 11.6

Getting Started
with Product
Visualization
PLM00109 • 11.6
Conteúdo

Product Visualization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1

Product Visualization overview . . . . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Visualization workflow . . . . . . . . . . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Lifecycle Visualization viewers . . . . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Ways to access Lifecycle Visualization ... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Understanding Startup Accelerator . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9
Stop Startup Accelerator . . . . . . . . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10
Graphics hardware requirements . . . .... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

How do I? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
How do I? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Display 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Examine 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
View 3D models from preset viewing angles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Smooth the edges of 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Capture an image of a 3D model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Create line drawings from 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12
View part properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Add text markups to the 3D scene . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Add callouts to parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Measure angles on 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Save 3D measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-30
Display Product Manufacturing Information (PMI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33
Change the color of a part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34
Create 3D snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-35
Create Visual Reports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
E-mail your work session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
View 2D images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-46
Compare 2D images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-49
Change 3D display modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-54
Create shortcuts to file locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-56
Change the background color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-58

Exploring the Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Overview of the interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Working with windows and views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Overview of visualization views and windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
Move windows and views around your workspace . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Control window and view docking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Show or hide visualization views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
List of visualization views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Viewing window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

PLM00109 11.6 Getting Started with Product Visualization 3

 Conteúdo
Conteúdo

Working with toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13

Display or hide toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Move toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Dock toolbars on Linux and Mac . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
Float toolbars on Mac and Linux . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14
List of toolbars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
Working with menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
Overview of menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
List of menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-45
Shortcut menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-71
Working with the status bar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-71
Status bar overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-71
Choosing colors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-72

Previewing images and .jt parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Image Preview and JT Preview views . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Preview images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
Preview .jt parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Opening files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Primary and secondary visualization documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Open visualization data from Teamcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
Working with product structure from Teamcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Inserting and merging files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
Specify load option preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4
Open visualization data in My Teamcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
Open visualization data in Structure Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6
View related documents in My Teamcenter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Specify open preferences for 2D or 3D files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Specify the PLM XML and Parasolid measurement unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-7
Opening session files in Multi-Site environments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

Locating referenced data automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1

Overview of locating referenced data automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Specify general loading preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
Confirm documents located automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Understanding Directory Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Specify the document search order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3
Specify search locations for documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4
Manage document locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-6
Specify the part search order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
View search results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Specify part logging preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-8
Disabling the File Locator search progress dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9
Saving and loading AutoFile Search preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-9

Saving your work session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Working with session files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

4 Getting Started with Product Visualization PLM00109 11.6

 Conteúdo

Overview of session files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1

Save your work session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3
Overview of static and configured product structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-4
Merge a saved session with an active session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Specify session preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5
Understanding the differences when saving session files or PLM XML files . . . . . . . . . . . . . . . 7-6
Understanding the differences between session files and PLM XML files . . . . . . . . . . . . . . 7-6
Overview of options when saving session files or PLM XML files . . . . . . . . . . . . . . . . . . . 7-7
Working with session packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Overview of session packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Save a session package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8
Add attachments to session packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-9
Open session package attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Specify the File Locate preferences for session packages . . . . . . . . . . . . . . . . . . . . . . . 7-10
Resolving broken references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Overview of broken references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-10
Resolve broken references manually . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-11
Search for reconcile candidates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Export mapping files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-13
Resolve broken references automatically with mapping files . . . . . . . . . . . . . . . . . . . . . 7-14
Validate references . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14
Specify Reconcile preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15
Mapping file guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-15

Saving files and visualization datasets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Exporting 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1

Overview of exporting 3D models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Exporting JT files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1
Exporting PLM XML files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6
Exporting VRML files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Exporting NASTRAN BULK files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11
Exporting ROBFACE files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-12
Saving 3D documents as PLM XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Overview of saving 3D documents as PLM XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-14
Save the active 3D document as PLM XML . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15
Export the active 3D model as a PLM XML file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-15
Specify PLM XML preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Convert 3D files to DirectModel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-16
Save 3D markup layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
Save an image of a 3D model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
Save your 3D assembly as a text file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
Save a graphic for Teamcenter Content Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19
Update a graphic for Teamcenter Content Management . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23
Save 2D layers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-24
Export images, create watermarks, and save 2D images . . . . . . . . . . . . . . . . . . . . . . . . . . 8-25
Save 2D layers using Image Capture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-31
Save 2D images as PVL files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-32
Generated .pvl example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-33
Setting PVL macro environment variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-35

PLM00109 11.6 Getting Started with Product Visualization 5

 Conteúdo
Conteúdo

E-mailing your work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

Capture and E-mail an image of the Viewing window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1

E-mailing your work session as a .vfz collaboration file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Overview of e-mailing your work session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Introduction to .vfz collaboration files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
Create and send .vfz collaboration files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3
Open and view e-mailed .vfz collaboration files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Edit and re-send .vfz collaboration files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4
Specify output preferences for .vfz collaboration files . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-5

Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Overview of printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1

Preview images and models before printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Print your current 2D or 3D view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
Watermark page example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-8
Working with Mac and Linux printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Add a Mac or Linux printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-9
Configure a default Mac or Linux printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Delete a Mac or Linux printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Add Mac or Linux printer page sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Delete Mac or Linux printer page sizes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-10
Print HP Raster Transfer Language (RTL) embedded images . . . . . . . . . . . . . . . . . . . . . . 10-11
Creating text and watermark stamps using an MDS file . . . . . . . . . . . . . . . . . . . . . . . . . . 10-11
Overview of adding text and watermark stamps with an MDS file . . . . . . . . . . . . . . . . . 10-11
Create text and watermark stamps using an MDS file . . . . . . . . . . . . . . . . . . . . . . . . . 10-12
MDS text and watermark examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
Set the beginning cursor position for stamps with MDS files . . . . . . . . . . . . . . . . . . . . 10-17
Specify the orientation of text stamps with MDS files . . . . . . . . . . . . . . . . . . . . . . . . . 10-18
Add uniform watermark stamps when exporting files . . . . . . . . . . . . . . . . . . . . . . . . . 10-19
Printing a date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-23
Overview of printing a date and time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-23
Add a date and time to headers and footers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-23
Add a date and time to a watermark . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-24
Add a date and time using an MDS file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-25
System administrator reference for configuring default Windows print preferences . . . . . . . . 10-25
Overview of system administrator reference for configuring default Windows print
preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-25
How to change default print settings for Windows systems . . . . . . . . . . . . . . . . . . . . . 10-26

Specifying preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Migrate user preferences when moving to a new version . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1

Setting higher security (FIPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Overview of setting higher security (FIPS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Activate FIPS security standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
Teamcenter Integration preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2
Overview of Teamcenter Integration preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-2
Teamcenter Integration 3D Loader preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3
Teamcenter Integration Session preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4

6 Getting Started with Product Visualization PLM00109 11.6

 Conteúdo

Teamcenter Integration Markup preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4

Teamcenter Integration Check Out preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-4
Teamcenter Integration Attributes preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-5
Teamcenter Integration Snapshot preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-6
Teamcenter Integration Visual Issue preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8
Teamcenter Integration 3D Save preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-8

PLM00109 11.6 Getting Started with Product Visualization 7

Capítulo 1: Product Visualization

Product Visualization overview

Powered by the industry-standard JT™ file format, Teamcenter lifecycle visualization provides your
entire organization with the ability to view design data typically stored in CAD-data formats. It lets
you explore and validate product innovations and issues in a collaborative environment. When
deployed in a Teamcenter environment, the data is always current and up-to-date. Support for PLM
XML also provides a lightweight, extensible mechanism for sharing product data with other Siemens
PLM Software products and supported third-party applications.
Teamcenter lifecycle visualization is available in multiple product configurations, giving you power and
flexibility to tailor your purchase to meet your organization's unique requirements.
For information about the supported versions of other Siemens PLM Software file formats,
see the Interoperability matrix on the Hardware and Software Certifications page on GTAC:
https://www.plm.automation.siemens.com/en_us/support/gtac/certifications.shtml.

PLM00109 11.6 Getting Started with Product Visualization 1-1

 Capítulo
Capítulo 1: 1:Product
Product Visualization
Visualization

Visualization workflow
You can simplify the lifecycle process of your product design by quickly and easily accessing data,
analyzing it, and collaborating on your findings.

The 3D CAD models are translated from their

native CAD-specific formats to the .jt format
either automatically using a translator in the CAD
Access the data system or using an external translator. The .jt
files are much more efficient than the original.
This means that you can work with even the most
complex assemblies quickly and easily.
You can perform many of the same analytical
tasks that are found in expensive, complicated
CAD products. For example, with Teamcenter
Analyze the data
lifecycle visualization base, you can measure
and compare 2D drawings and measure 3D parts
and create cross sections.
Whether you’re gathering information for a
prospective client, leading a design team, or
Collaborate
manufacturing parts for a large customer, you
can share your ideas with colleagues.

Lifecycle Visualization viewers

The Lifecycle Visualization integration with Teamcenter supports the Teamcenter lifecycle
visualization stand-alone viewer and the Lifecycle Viewer within the rich client. In addition, many rich
client perspectives include embedded visualization components.

1-2 Getting Started with Product Visualization PLM00109 11.6

 Product Visualization

Stand-alone viewer

The stand-alone viewer, which runs outside of Teamcenter and is a separate installation, expands
upon Teamcenter's embedded visualization components with support for optional software modules
such as Concept, Visualization Illustration, Quality Producer, and Variation Analysis. Stand-alone
Lifecycle Visualization is integrated with Teamcenter, so you can send data from Teamcenter
applications into the stand-alone viewer, perform analysis, and then save your work back to the
database.
Stand-alone Lifecycle Visualization is available in the following product configurations:
• Base
The Base product configuration enables you to view and mark up 2D images and perform basic
3D analysis operations such as measurements and cross sections.

• Standard
The Standard product configuration provides many additional features, such as advanced
navigation capabilities, markup tools, and support for precise 3D measurements.

• Professional
The Professional product configuration adds analysis functionality such as 3D comparisons, as
well as the ability to manipulate and transform 3D models, create outline captures, and play
motion files that illustrate assembly sequences. You can optionally use add-on modules such as
Animation, Concept, and Visualization Illustration.

• Mockup
The Mockup product configuration provides all of the functionality from the other product
configurations and also includes advanced features such as 3D clearance analysis, geometry
simplification, part groups, 3D filters, and movie captures. You can optionally use all of the
available add-on modules, including Quality Producer, Variation Analysis, Jack, and Path
Planning.

Lifecycle Viewer

The Lifecycle Viewer is a full-fledged visualization client within Teamcenter. It provides nearly all of
the visualization tools offered by the stand-alone viewer, many of which are not available in the
embedded viewers within Teamcenter applications such as My Teamcenter.
The Lifecycle Viewer is available in the same product configurations as the stand-alone viewer, Base,
Standard, Professional, and Mockup. Features available vary depending upon the licensing level.
The Base configuration is automatically installed with the rich client.
Using the Lifecycle Viewer, you can:
• Work within a comprehensive user interface that provides access to many of the options
previously available only with the stand-alone products, including menus and views (the
equivalent of Project Workspace windows such as the Assembly).

• Insert or merge files within active Viewing windows.

• Work with multiple open datasets.

PLM00109 11.6 Getting Started with Product Visualization 1-3

 Capítulo
Capítulo 1: 1:Product
Product Visualization
Visualization

• Preserve the state of your work with session files.

• Save data as PLM XML.

• Export 2D images and 3D models as supported datasets.

• Author visualization data such as motion files, swept volumes, and .vfz collaboration files.

Working with visualization data in the My Teamcenter viewer

The Viewer view in My Teamcenter displays content dependent on the type of object selected in the
current component view or in the Details view. Support for visualization data includes:
• If an item or item revision is selected, the viewer displays the associated image, printed circuit
board, schematic, or JT data.

• If an image, ECAD PCB, ECAD Schematic, or JT dataset is selected, the viewer displays the
image, printed circuit board, schematic, or model.

Visualization use cases

• View and markup of parts, printed circuit boards, schematics, drawings and images, without
having to launch the stand-alone viewer or the Lifecycle Viewer.

Visualization tools available

• 2D Markup
Create 2D markups.

• 2D Multipage
Navigate among pages in multiple-page 2D images or documents.

• 2D Viewing
Pan, zoom, rotate, and flip 2D images.

• 3D Markup
Create 3D markups.

• 3D Measurement
Perform 3D measurements.

• 3D Navigation
Pan, rotate, and zoom 3D models.

• 3D PMI
View and manipulate PMI in your model.

• 3D Section
Create 3D cross sections.

1-4 Getting Started with Product Visualization PLM00109 11.6

 Product Visualization

• 3D Selection
Select parts and pick part features.

• 3D Standard Views
Examine your model from preset viewing angles.

• ECAD Base
Manipulate the view of ECAD document layers, control layer color and visibility, search, and
create reports.

• ECAD Markup
Create ECAD markups.

• ECAD Multipage
Navigate among pages in multiple-page schematic documents.

• ECAD Viewing
Pan, zoom, rotate, and flip image.

• Print
Print documents.

Structure Manager viewer

The viewer embedded in Structure Manager is available within the Viewer tab of the data pane. The
viewer allows you to view JT files attached to assemblies and components in the structure tree when
you are viewing and editing a product structure.
Visualization use cases
• View 3D assemblies or structures.

• View subcomponents in an assembly.

• Compare product structures.

• Create and save product views.

Visualization tools available

• 3D Alignment
Align parts with other parts in the viewing window.

• 3D Appearance
Change the appearance of 3D models.

• 3D Clearance
Check the clearance of parts in 3D models.

PLM00109 11.6 Getting Started with Product Visualization 1-5

 Capítulo
Capítulo 1: 1:Product
Product Visualization
Visualization

• 3D Comparison
Compare the geometry of two sets of parts.

• 3D Coordinate System
Create and align parts to local coordinate systems.

• 3D GDT Markup
Create 3D GD&T markups.

• 3D Manipulators
Transform 3D models.

• 3D Markup
Create 3D markups.

• 3D Measurement
Perform 3D measurements.

• 3D Movie Capture
Capture your actions in the 3D viewing window as movie files.

• 3D Navigation
Pan, rotate, and zoom 3D models.

• 3D PMI
View and manipulate PMI in your model.

• 3D Section
Create 3D cross sections.

• 3D Selection
Select parts and pick part features.

• 3D Standard Views
Examine your model from preset viewing angles.

• 3D Thrustline Editor
Create and manipulate thrustlines.

• 3D Visibility
Hide obscuring parts and clip areas of your model.

1-6 Getting Started with Product Visualization PLM00109 11.6

 Product Visualization

Multi-Structure Manager viewer

The viewer embedded in Multi-Structure Manager is available within the Object View tab of the data
panel. The viewer allows you to view associated 2D images and 3D models when you are viewing
and editing a product or process structure.
Visualization use cases
• View product or process structures.

• View images associated with objects selected on the structure tab.

• View and create markups.

• Create and save product views.

Visualization tools available

• 2D Markup
Create 2D markups.

• 2D Multipage
Navigate among pages in multiple-page 2D images or documents.

• 2D Viewing
Pan, zoom, rotate, and flip 2D images.

• 3D Markup
Create 3D markups.

• 3D Measurement
Perform 3D measurements.

• 3D Navigation
Pan, rotate, and zoom 3D models.

• 3D PMI
View and manipulate PMI in your model.

• 3D Section
Create 3D cross sections.

• 3D Selection
Select parts and pick part features.

• 3D Standard Views
Examine your model from preset viewing angles.

PLM00109 11.6 Getting Started with Product Visualization 1-7

 Capítulo
Capítulo 1: 1:Product
Product Visualization
Visualization

Manufacturing Process Planner viewer

The viewer embedded in Manufacturing Process Planner is available within the Object View tab of
the data panel. The viewer allows you to view associated 2D images and 3D models when you are
viewing and editing a process structure.
Visualization use cases
• View product or process structures.

• View images associated with objects selected on the structure tab.

• View and create markups.

• Create and save product views.

Visualization tools available

• 2D Markup
Create 2D markups.

• 2D Multipage
Navigate among pages in multiple-page 2D images or documents.

• 2D Viewing
Pan, zoom, rotate, and flip 2D images.

• 3D Markup
Create 3D markups.

• 3D Measurement
Perform 3D measurements.

• 3D Navigation
Pan, rotate, and zoom 3D models.

• 3D PMI
View and manipulate PMI in your model.

• 3D Section
Create 3D cross sections.

• 3D Selection
Select parts and pick part features.

• 3D Standard Views
Examine your model from preset viewing angles.

1-8 Getting Started with Product Visualization PLM00109 11.6

 Product Visualization

JT Preview view
The JT Preview view enables you to examine .jt parts associated with items, item revisions, and
datasets. When you select a compatible object, the .jt part is displayed in the view.
Visualization use cases
• Preview .jt parts.

Visualization tools available

• 3D Navigation
Pan, rotate, and zoom 3D models.

Image Preview view

The Image Preview view enables you to examine 2D raster images associated with items, item
revisions, and datasets. When you select a compatible object, the image is displayed in the view.
Visualization use cases
• Preview 2D raster images.

Visualization tools available

• None

Ways to access Lifecycle Visualization

You can access Lifecycle Visualization by:
• Starting the stand-alone viewer, where you access the files from a local or network drive.

• Accessing files from Teamcenter, and viewing them in one of the embedded viewers or sending
them to stand-alone Lifecycle Visualization.

Understanding Startup Accelerator

Teamcenter Visualization Startup Accelerator is a small Windows application that speeds up the initial
start of Teamcenter viewers by pre-loading key visualization dynamic link libraries (DLLs) when you
start your computer.
• The application is available only for Windows.

• Installing Startup Accelerator is an option when you install Teamcenter.

• When you install the application, a Startup Accelerator icon appears in the Windows taskbar
notification area.

Startup Accelerator consumes a small amount of your system memory when it loads visualization
DLLs. If your computer is low on memory, you can stop Startup Accelerator to release the memory.
You lose the benefits of Startup Accelerator, but increase available memory.

PLM00109 11.6 Getting Started with Product Visualization 1-9

 Capítulo
Capítulo 1: 1:Product
Product Visualization
Visualization

Stop Startup Accelerator

• In the Windows taskbar notification area, right-click the Startup Accelerator icon and do
any of the following:

To Choose
Stop Startup Accelerator and unload the DLLs
Stop
from memory
Restart the Startup Accelerator application
Start
after stopping
Exit
The icon disappears from the Windows taskbar.

To unload the DLLs and close the Startup Nota

Accelerator application
To restart the Startup Accelerator
application after exiting, you must
restart your computer.

Nota
If your computer has adequate memory, you do not need to stop Startup Accelerator.

Graphics hardware requirements

Supported graphics adapters for use with Teamcenter lifecycle visualization include the following
professional 3D graphics adapters with their professional drivers:

Manufacturer Models
NVIDIA Quadro, QuadroFX, Grid
AMD FireGL, FirePro
Intel HD 4600 and newer

For full confidence that all of the advanced features of Teamcenter lifecycle visualization are
displayed, including effects such as high-quality transparency, shadows, mirrors, CAE analysis
results, intersection volumes, and other features requiring advanced graphics capabilities, use a
certified system. Siemens PLM Software and our OEM partners rigorously test specific graphics
adapters and drivers on a select set of workstations. Graphic adapters and drivers that pass are
certified for use with a particular version of Teamcenter lifecycle visualization.
For information about certified systems, see the Hardware and Software Certifications page on GTAC
(http://www.plm.automation.siemens.com/locale/support/gtac/certifications.shtml) and follow the
link to Hardware (Graphics Card) Certifications.

1-10 Getting Started with Product Visualization PLM00109 11.6

 Product Visualization

Nota
Starting with Lifecycle Visualization version 10.1, if your graphics card supports OpenGL
3.2 or later, Lifecycle Visualization uses advanced OpenGL features to improve 3D
rendering performance, including making use of memory on the graphics card. If you work
with large models, we recommend graphics cards with 2GB or 4GB of GPU memory, or
more. While exact memory requirements are highly situation specific, a rough guideline
for required graphics card memory is 1 GB of graphics memory for every 2 GB of loaded
geometry data.

Consumer line and 2D graphics adapters

We do not recommend consumer lines of graphics adapters. These adapters and drivers are
designed for playing games and emphasize frame rate over correctness. Drivers for consumer
graphics are serviced by driver development and ISV partner teams separate from those for
professional 3D adapters.
However, even these video adapters, if you have the most current graphics driver, usually work at a
reduced effects level with Lifecycle Visualization. It may be necessary to reduce the performance
settings.

Nota
When the OpenGL level of a graphics adapter is not capable of rendering an advanced
visualization effect, the visual effect is silently omitted.
Some graphics adapters, especially those manufactured before 2008, contain issues that
prevent Lifecycle Visualization from displaying certain specific features properly, regardless
of their OpenGL support level claims.

Resolving graphics adapter issues

You are encouraged to report graphics display problems found on recommended and certified
hardware to https://www.siemens.com/gtac. We attempt to reproduce the problem. If a reproducible
problem is determined to lie within Lifecycle Visualization software, we fix it directly; if a problem is
found with the graphics driver, we work with the graphics vendor to isolate the issue and assist
them as necessary to produce a driver patch.
We do not attempt to resolve problems that cannot be reproduced on recommended or certified
hardware; we advise you to take such issues directly to the graphics adapter manufacturer.

PLM00109 11.6 Getting Started with Product Visualization 1-11

Capítulo 2: How do I?

How do I?
The following is a set of best practices for commonly asked questions gathered into one place for
easy access.
• Display 3D models

• Examine 3D models

• View 3D models from preset viewing angles

• Smooth the edges of 3D models

• Capture an image of a 3D model

• Create line drawings from 3D models

• View part properties

• Add text markups to the 3D scene

• Add callouts to parts

• Measure angles on 3D models

• Save 3D measurements

• Display Product Manufacturing Information (PMI)

• Change the color of a part

• Create 3D snapshots

• Create Visual Reports

• E-mail your work session

• View 2D images

• Compare 2D images

• Change 3D display modes

• Create shortcuts to file locations

• Change the background color

PLM00109 11.6 Getting Started with Product Visualization 2-1

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Display 3D models

1. Open a 3D model.

2. In the assembly tree, click the + icon next to the name of the top-level assembly node.

The assembly expands to show additional levels of structure.

Dica
When you first open a 3D model that consists of more than one part, only the assembly
tree is visible. You can use the tree to turn on the entire model or only the parts that
you want to view.

3. Select the check box next to the name of a subassembly or part.

The geometry is displayed in the Viewing window.

2-2 Getting Started with Product Visualization PLM00109 11.6

 How do I?

Examine 3D models

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Navigation.

The 3D Navigation toolbar is displayed.

3. Rotate around the model.

a. On the 3D Navigation toolbar, click Examine .

b. To rotate freely around the model, in the center of the Viewing window, click and drag the
cursor.
The model appears to rotate across axes according to your mouse movements.

c. To constrain the model rotation, click and drag along the top, bottom, left, or right edge of
the Viewing window.
If the cursor is near the left or right edge of the Viewing window when you begin, a horizontal
axis is used for rotation.

PLM00109 11.6 Getting Started with Product Visualization 2-3

 Capítulo
Capítulo 2: 2:How How
do I?do I?

If the cursor is near the bottom edge, a vertical axis is used for rotation.

If the cursor is near the top edge, a perpendicular axis is used for rotation.

4. Pan across the model.

a. Click Pan .

b. In the Viewing window, click and drag in any direction.

The navigation camera pans across the model.

5. Zoom in or out on the model.

a. Click Navigate .

b. In the Viewing window, click and drag up toward the top of the Viewing window then down
toward the bottom.
The navigation camera zooms in and out on the model.

2-4 Getting Started with Product Visualization PLM00109 11.6

 How do I?

View 3D models from preset viewing angles

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Standard Views.
The 3D Standard Views toolbar is displayed.

3. On the 3D Standard Views toolbar, click Align to Axis , and then choose a viewing angle.

Smooth the edges of 3D models

1. Open and display a 3D model.

2. Turn on antialiasing.
a. Right-click a blank area of the Viewing window and choose Preferences.

b. On the General tab of the Preferences dialog box, select the Antialiasing check box.

PLM00109 11.6 Getting Started with Product Visualization 2-5

 Capítulo
Capítulo 2: 2:How How
do I?do I?

c. From the No. of samples list, choose the number of samples for antialiasing.

2-6 Getting Started with Product Visualization PLM00109 11.6

 How do I?

Nota
A higher number of samples results in smoother edges. However, using a higher
number of samples may also impact the performance of your system.

d. Select the Set as default check box to automatically apply your antialiasing settings when
you open 3D models.

PLM00109 11.6 Getting Started with Product Visualization 2-7

 Capítulo
Capítulo 2: 2:How How
do I?do I?

e. Click OK to close the preferences.

3. Display your model with antialiasing turned on.

• Choose Window →Clone Window to launch your model in a new Viewing window so you
can see the effect of the antialiasing on the model.

Nota
Whenever you change your antialiasing settings, for the new settings to take
effect you must always display your model in a new Viewing window or close
and reopen the model.

Capture an image of a 3D model

2-8 Getting Started with Product Visualization PLM00109 11.6

 How do I?

1. Open and display a 3D model.

2. Capture the 2D image.

a. Right-click the toolbar area of the application, and select Image Capture.
The Image Capture toolbar is displayed.

b. Stage the contents of the Viewing window as needed.

Dica
A 2D image capture exactly matches what you see in the Viewing window, so you
may want to adjust the visibility and position of your model. You can also control
the dimensions of the image by changing the size of the Viewing window.

c. On the Image Capture toolbar, click Image Capture .

A 2D image capture of the Viewing window is created.

PLM00109 11.6 Getting Started with Product Visualization 2-9

 Capítulo
Capítulo 2: 2:How How
do I?do I?

3. Save the 2D image.

a. Choose File→Export Image.

b. In the Export Image dialog box, adjust the settings as needed.

Dica
A resolution of 72 DPI is suitable for images to display on a monitor (e-mail and
web pages). Use a resolution of at least 300 DPI for print content.

2-10 Getting Started with Product Visualization PLM00109 11.6

 How do I?

c. Click OK.

d. In the Export Image save dialog box, browse to the location where you want to save your
image, and click Save.

PLM00109 11.6 Getting Started with Product Visualization 2-11

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Create line drawings from 3D models

1. Open and display a 3D model.

2. Create the outline capture.

a. Stage the contents of the Viewing window as needed.

Dica
An outline capture includes only what you see in the Viewing window, so you may
want to adjust the visibility of your model. Since the capture is a vector image,
the position of the model within the boundaries of the Viewing window does not
matter because you can scale the image with no loss of image quality. Any part
of the model that is turned off or outside of the Viewing window is not included in
the capture.

2-12 Getting Started with Product Visualization PLM00109 11.6

 How do I?

b. Choose Actions→Outline Capture→Current 3D Window.

The outline capture is created. The drawing of the model is placed on a unique layer in the
tree. Any 3D measurements or markups included in the capture are placed on separate
layers.

3. Save the outline capture as a 2D vector image.

a. Choose File→Layers→Save All Layers.

PLM00109 11.6 Getting Started with Product Visualization 2-13

 Capítulo
Capítulo 2: 2:How How
do I?do I?

b. In the Save As dialog box, browse to the location where you want to save your image,
and click Save.

View part properties

You can view properties of an assembly or part in the Properties dialog box, and you can add an
attribute from the Properties dialog box to the Assembly view as a new column of information for
part and assembly nodes.
1. In the Assembly view, right-click a part or assembly and choose Properties.

2-14 Getting Started with Product Visualization PLM00109 11.6

 How do I?

2. In the Properties dialog box, view the part or assembly properties on the respective properties
page.
Attributes
Geometry
Extent

Attributes page

The Attributes page of the Properties dialog box displays any metadata associated with the part or
assembly.

Dica
You can add an attribute from the Properties dialog box to the Assembly view as a new
column of information for part and assembly nodes.

1. On the Attributes page, in the Attribute column, select an attribute.

2. Click Add as Column.

PLM00109 11.6 Getting Started with Product Visualization 2-15

 Capítulo
Capítulo 2: 2:How How
do I?do I?

A new column for the attribute appears in the assembly tree.

Geometry page

The Geometry page of the Properties dialog box displays Area, Volume, Density, Mass, and
Center of mass for the part or assembly. For each property, a numeric annotation within curly
braces { } identifies the source of the value.

2-16 Getting Started with Product Visualization PLM00109 11.6

 How do I?

{1} From model

The JT model contains specific properties that hold the exact measurements, and those are used
to populate the dialog box. These JT properties are:
JT Property Name Meaning
JT_PROP_MEASUREMENT_UNITS CAD Model Units
CAD_MASS_UNITS Units of mass
CAD_SURFACE_AREA Surface area of solids within a part
CAD_VOLUME Volume of solids within a part
Density of solids within a part
CAD_DENSITY While the single value implies uniform density,
such may not be the case.
CAD_MASS Mass or weight of solids within a part
CAD_CENTER_OF_GRAVITY Center of gravity of solids within a part

PLM00109 11.6 Getting Started with Product Visualization 2-17

 Capítulo
Capítulo 2: 2:How How
do I?do I?

{2} Calculated
The JT model properties listed in {1} are not present. Therefore, an approximate value is
calculated from the polygonal data. The tilde ~ symbol appears in front of a calculated value.
BREP data is not used for the calculation.
{3} Default Measurement
The JT model property CAD_DENSITY is not present and the Density value has not been manually
entered. Therefore, the default density value as specified in the Calculations tab of the
Measurement Preferences dialog box is used.
{4} User-Defined
The Density value is manually entered.
Extent page
The Extent page of the Properties dialog box displays location and size information for the part or
assembly, including Min, Max, Center, Length X, Length Y, and Length Z.

Add text markups to the 3D scene

1. Open and display a 3D model.

2-18 Getting Started with Product Visualization PLM00109 11.6

 How do I?

2. Right-click the toolbar area of the application, and select 3D Markup.

The 3D Markup toolbar is displayed.

3. Add a comment to the 3D scene.

a. On the 3D Markup toolbar, click 3D Markup .

b. Click Text .

c. Click anywhere in the Viewing window.

d. In the Markup Text dialog box, type some text and click OK.

PLM00109 11.6 Getting Started with Product Visualization 2-19

 Capítulo
Capítulo 2: 2:How How
do I?do I?

The text is displayed in the scene.

4. Create a text markup that is anchored to a part.

a. On the 3D Markup toolbar, click Anchor .

b. Click a part.

2-20 Getting Started with Product Visualization PLM00109 11.6

 How do I?

c. In the Markup Text dialog box, type some text and click OK.

A text markup that is anchored to the part is created.

PLM00109 11.6 Getting Started with Product Visualization 2-21

 Capítulo
Capítulo 2: 2:How How
do I?do I?

5. Change the position of a text markup.

a. On the 3D Markup toolbar, click Select .

b. In the Viewing window, click and drag the markups to new locations.
The anchored text markup has a leader line connecting it to the part.

6. Rotate your view to see how the two types of markups behave.

2-22 Getting Started with Product Visualization PLM00109 11.6

 How do I?

7. Save your markups with the model.

a. Choose File→Save Session.

b. In the Session Save As dialog box, click Browse to specify the location where you want to
save the session file.

c. Click Save.

PLM00109 11.6 Getting Started with Product Visualization 2-23

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Add callouts to parts

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Markup.

The 3D Markup toolbar is displayed.

3. Set up the callouts.

a. On the 3D Markup toolbar, click Enable Markup .

b. Click Preferences .

c. In the Markup 3D Preferences dialog box, click the Text tab.

d. In the Bounding Shape section, select Circle from the list.

e. In the Pre-defined Text section, click Edit.

2-24 Getting Started with Product Visualization PLM00109 11.6

 How do I?

f. In the Edit Text dialog box, click <Callout>, click Add Key, and then click OK.

g. At the bottom of the Text tab, click Callouts.

PLM00109 11.6 Getting Started with Product Visualization 2-25

 Capítulo
Capítulo 2: 2:How How
do I?do I?

h. In the Callouts dialog box, in the Default Callout Format section, choose Numeric.

i. In the Starting Value section, in Numeric, type 1.

j. Click OK twice to close the preferences.

4. Add the first callout.

a. On the 3D Markup toolbar, click the following buttons:

• Text

• Anchor Mode

• Use Pre-defined Text Mode

b. In the Viewing window, pick a part.

2-26 Getting Started with Product Visualization PLM00109 11.6

 How do I?

The callout appears on the part.

5. Add more callouts.

a. Pick several more parts.

b. On the 3D Markup toolbar, click Select and drag the callouts away from the parts.

PLM00109 11.6 Getting Started with Product Visualization 2-27

 Capítulo
Capítulo 2: 2:How How
do I?do I?

6. Reset your markup preferences.

a. On the 3D Markup toolbar, click Preferences .

b. On the Text tab, set the Bounding Shape to Rectangle.

c. In the Pre-defined Text section, click Edit, delete <Callout>, and click OK.

Measure angles on 3D models

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select the following:
• 3D Measurement

2-28 Getting Started with Product Visualization PLM00109 11.6

 How do I?

The 3D Measurement toolbar is displayed.

• 3D Selection
The 3D Selection toolbar is displayed.

3. Measure the angle of a circular arc.

• Press Ctrl and on the 3D Selection toolbar, click Edge to make it the only active
selection filter.

• On the 3D Measurement toolbar, click Single Measurement .

• In the Viewing window, click a curving edge.

The application measures the edge, displaying its center, radius, angle, and length.

4. Measure the angle between two surfaces.

• Press Ctrl and on the 3D Selection toolbar, click Surface to make it the only active
selection filter.

• On the 3D Measurement toolbar, click Angle .

• In the Viewing window, click two surfaces.

The application measures the angle between the two surfaces.

PLM00109 11.6 Getting Started with Product Visualization 2-29

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Save 3D measurements

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Measurement.

The 3D Measurement toolbar is displayed.

3. Right-click the toolbar area of the application, and select 3D Selection.

The 3D Selection toolbar is displayed.

4. Specify the preference to include measurements in session files.

a. On the 3D Measurement toolbar, click 3D Measurement .

b. Click Preferences .

c. In the Measurement Preferences dialog box, click the General tab.

d. In the All Measurements section, click the following check boxes:

• Save to session files

• Restore during session load

2-30 Getting Started with Product Visualization PLM00109 11.6

 How do I?

e. Click OK to close the preferences.

5. Measure the distance between two points on your model.

a. On the 3D Measurement toolbar, click Distance .

b. On the 3D Selection toolbar, if Point is not the only active selection filter, press Ctrl and
click Point .

c. In the Viewing window, click two points on the model.

The measurement is created.

PLM00109 11.6 Getting Started with Product Visualization 2-31

 Capítulo
Capítulo 2: 2:How How
do I?do I?

6. Save the measurement with a session file.

a. Choose File→Save Session.

b. In the Session Save As dialog box, click Browse to specify the location where you want to
save the session file.

c. Click Save.

7. Close and reopen the session file to restore your measurement.

a. Choose File→Close Session.

b. Choose File→Open.

c. In the Open dialog box, open your session file.

The saved measurement is automatically displayed in the Viewing window.

2-32 Getting Started with Product Visualization PLM00109 11.6

 How do I?

Display Product Manufacturing Information (PMI)

1. Open and display a 3D model that includes PMI.

2. Right-click the toolbar area of the application, and select 3D PMI.

The 3D PMI toolbar is displayed.

3. On the 3D PMI toolbar, click PMI .

4. Click Multiple Entity Mode .

5. In the Viewing window, click parts to display PMI.

The PMI is displayed in the Viewing window and in the PMI view.

PLM00109 11.6 Getting Started with Product Visualization 2-33

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Change the color of a part

1. On the 3D Appearance toolbar, click Quick Color Tool .

2. In the Viewing window or the assembly tree, select the part to change (or hold Ctrl and select
multiple parts).

3. In the Quick Color dialog box, choose a color from the color well.

4. From the transparency list, select a level of transparency.

2-34 Getting Started with Product Visualization PLM00109 11.6

 How do I?

Create 3D snapshots

1. Open and display a model.

2. Choose Toolbars→Snapshots.

The Snapshots toolbar is displayed.

3. Create the snapshots.

a. Open the Snapshots view.

b. On the Snapshots toolbar, click Add .

A new snapshot is created in the Snapshots view.

c. Rotate the model view in the Viewing window.

PLM00109 11.6 Getting Started with Product Visualization 2-35

 Capítulo
Capítulo 2: 2:How How
do I?do I?

d. On the Snapshots toolbar, click Add .

A snapshot capturing the new model orientation is created.

e. In the Viewing window, right-click a part and select Turn Off.

The part is no longer displayed.

2-36 Getting Started with Product Visualization PLM00109 11.6

 How do I?

f. On the Snapshots toolbar, click Add .

A snapshot capturing the modified part visibility is created.

4. Apply the snapshots.

a. In the Snapshots view, double-click the first snapshot.
The Viewing window updates to match the snapshot.

b. In the Snapshots view, double-click the second snapshot.

The Viewing window updates to match the snapshot.

c. In the Snapshots view, double-click the third snapshot.

The Viewing window updates to match the snapshot.

Create Visual Reports

Nota
You can also use the Find command identify parts that match specified criteria.

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Visual Report.

PLM00109 11.6 Getting Started with Product Visualization 2-37

 Capítulo
Capítulo 2: 2:How How
do I?do I?

The 3D Visual Report toolbar is displayed.

3. Create a single rule report.

a. On the Visual Report toolbar, click Visual Report .

b. Click Single Rule Report .

The Single Rule Report dialog box is displayed.

4. Define the scope of the report.

a. In the Report Scope section, from the Source:Attribute list, choose Select.

The Attribute Selection dialog box is displayed.

2-38 Getting Started with Product Visualization PLM00109 11.6

 How do I?

b. In the Attribute Selection dialog box, click Execute.

PLM00109 11.6 Getting Started with Product Visualization 2-39

 Capítulo
Capítulo 2: 2:How How
do I?do I?

The Attribute List is populated with data from the model.

c. Choose Category, and click OK.

2-40 Getting Started with Product Visualization PLM00109 11.6

 How do I?

d. The first part of the query is now displayed.

e. To specify the category value, from the second list, choose Select.

PLM00109 11.6 Getting Started with Product Visualization 2-41

 Capítulo
Capítulo 2: 2:How How
do I?do I?

f. An error message is displayed because you must first specify the parts that you want to
search for attribute values. Click OK to close the message.

g. Right-click in the Viewing window, and choose Select All.

This selects all of the parts in the model.

h. In the Attribute Values dialog box, click Regenerate.

2-42 Getting Started with Product Visualization PLM00109 11.6

 How do I?

The attribute values available to the report are now displayed.

i. Select an attribute value, and then click OK.

PLM00109 11.6 Getting Started with Product Visualization 2-43

 Capítulo
Capítulo 2: 2:How How
do I?do I?

The second part of the query is now displayed.

5. Apply the report.

• In the Single Rule Report dialog box, click Apply.

2-44 Getting Started with Product Visualization PLM00109 11.6

 How do I?

All of the parts that match the query are displayed in red; unmatched parts turn
semi-transparent gray.

E-mail your work session

1. Open a 3D model and display the content that you want to include in the collaboration file, such
as parts, 3D markups, and groups.

Nota
Only what is visible in the Viewing window is included in the collaboration file.
Snapshots are not packaged in new collaboration files because they may reference
parts that are not currently visible, which may result in a reconcile problem for the
recipient of the file.

2. Specify to include lightweight versions of the JT parts in the collaboration file.

a. Choose File→Preferences→Collaboration.

b. In the Packaged Collaboration File Preferences dialog box, from the Content section,
choose Active View and Lightweight.

PLM00109 11.6 Getting Started with Product Visualization 2-45

 Capítulo
Capítulo 2: 2:How How
do I?do I?

c. Click OK.

3. E-mail the collaboration file.

a. Choose File→Send Mail→Collaboration File.

Your work session is packaged as a .vfz file and attached to a new e-mail message.

b. Send the e-mail to your recipient.

4. View the collaboration file.

a. Open the e-mail with the collaboration file attachment.

b. Open the attachment to display the saved session in the viewer.

View 2D images

1. Open a 2D image.

2. Right-click the toolbar area of the application, and select 2D Viewing.

The 2D Viewing toolbar is displayed.

3. Zoom in on an area of the image.

a. On the 2D Viewing toolbar, click Zoom Area .

b. In the Viewing window, click and drag a box around an area of the image.
The selected area fills the window.

2-46 Getting Started with Product Visualization PLM00109 11.6

 How do I?

4. Center the image on a specific point.

a. On the 2D Viewing toolbar, click Seek .

b. In the Viewing window, click anywhere.

The image is centered on the specified point.

5. Pan across the image.

a. On the 2D Viewing toolbar, click Pan .

b. In the Viewing window, click and drag across the image.

The image pans across the screen.

PLM00109 11.6 Getting Started with Product Visualization 2-47

 Capítulo
Capítulo 2: 2:How How
do I?do I?

6. Fit the entire image in the Viewing window.

• On the 2D Viewing toolbar, click Fit All .

The image is scaled to fit within the Viewing window.

7. Flip the image horizontally and vertically.

• On the 2D Viewing toolbar, click Flip Horizontal .

• On the 2D Viewing toolbar, click Flip Vertical .

8. Rotate the image.

• On the 2D Viewing toolbar, click Rotate Clockwise .

2-48 Getting Started with Product Visualization PLM00109 11.6

 How do I?

• On the 2D Viewing toolbar, click Rotate Counterclockwise .

Compare 2D images

1. Open the 2D images that you want to compare.

a. Choose File→Open and open the first image.
The image is displayed in the Viewing window. It also appears in the Base Document
section of the 2D tree.

PLM00109 11.6 Getting Started with Product Visualization 2-49

 Capítulo
Capítulo 2: 2:How How
do I?do I?

b. Choose File→Insert and insert another version of the 2D image.

The second image overlays the base document image in the Viewing window. It also appears
in the Markup Layers section of the 2D tree.

2. Perform the 2D comparison.

2-50 Getting Started with Product Visualization PLM00109 11.6

 How do I?

a. Right-click the toolbar area of the application, and select 2D Compare.

The 2D Compare toolbar is displayed.

b. On the 2D Compare toolbar, click Compare Layers .

The Compare Layer List Dialog dialog box opens.

c. From the First Layer list, choose one of the open images.

d. From the Second Layer list, choose the other image.

e. Click OK.
The image comparison is performed. A new layer called the compare layer is created. The
compare layer, which is black, shows only the common elements of the compared images.
The first layer image turns red; the second layer image turns green.

3. Review the results of the comparison.

• To display the first layer only, on the 2D Compare toolbar, click Display 1st Layer .

PLM00109 11.6 Getting Started with Product Visualization 2-51

 Capítulo
Capítulo 2: 2:How How
do I?do I?

• To display the second layer only, on the 2D Compare toolbar, click Display 2nd Layer .

• To display the compare layer only, on the 2D Compare toolbar, click Display Compare
Layer .

2-52 Getting Started with Product Visualization PLM00109 11.6

 How do I?

• To display all of the layers from the comparison, on the 2D Compare toolbar, click Display
All .

PLM00109 11.6 Getting Started with Product Visualization 2-53

 Capítulo
Capítulo 2: 2:How How
do I?do I?

Change 3D display modes

1. Open and display a 3D model.

2. Right-click the toolbar area of the application, and select 3D Display Modes.
The 3D Display Modes toolbar is displayed.

3. Change the display mode for individual parts.

a. In the Viewing window, select a part.

b. On the 3D Display Modes toolbar, click Draw tessellation lines .

c. The part is displayed in the Tessellation Lines display mode.

2-54 Getting Started with Product Visualization PLM00109 11.6

 How do I?

4. To reset the part appearance, click Clear display modes .

5. Change the display mode for the entire model.

a. To ensure that no parts are selected, click on a blank area of the Viewing window.

b. On the 3D Display Modes toolbar, click Draw feature lines .

Lines are displayed on the edges of the model.

c. To show only the feature lines, click Draw shaded model .

The model is displayed in the Feature Lines display mode.

PLM00109 11.6 Getting Started with Product Visualization 2-55

 Capítulo
Capítulo 2: 2:How How
do I?do I?

d. To remove hidden lines from the model, click Hidden lines invisible .

Create shortcuts to file locations

1. Choose File→Open.
The Open dialog box is displayed.

2-56 Getting Started with Product Visualization PLM00109 11.6

 How do I?

2. Add a folder to your user areas.

a. Browse to a location you want to bookmark.

b. On the Open dialog box, choose Tools→Add Current Location To User Areas.

A new folder appears in your user areas.

c. Name the folder.

d. Double-click the folder and open a file.

The user area is created.

PLM00109 11.6 Getting Started with Product Visualization 2-57

 Capítulo
Capítulo 2: 2:How How
do I?do I?

e. Close the file.

3. Access a user area.

a. Choose File→Open.

b. On the left side of the Open dialog box, click User Areas.
Your user areas are displayed.

c. Double-click a folder to access your files.

Change the background color

1. Open and display a 3D model.

2. Right-click a blank area of the Viewing window and choose Preferences.

The Preferences dialog box is displayed.

2-58 Getting Started with Product Visualization PLM00109 11.6

 How do I?

3. Specify a solid color for the background.

a. In the Window section, from the Background list, choose Solid.

b. Click the color well and choose the background color.

PLM00109 11.6 Getting Started with Product Visualization 2-59

 Capítulo
Capítulo 2: 2:How How
do I?do I?

c. Click Apply.

4. Specify a color gradient for the background.

a. In the Window section, from the Background list, choose from the following gradients:
• Vertical — A two color vertical gradient.

• Horizontal — A two color horizontal gradient.

• Corners — A four color diagonal gradient.

b. Click the color wells and choose the gradient colors.

5. Save your settings.

2-60 Getting Started with Product Visualization PLM00109 11.6

 How do I?

a. In the Window section, click the Set as default check box.

b. Click OK.
The background color settings are saved.

PLM00109 11.6 Getting Started with Product Visualization 2-61

Capítulo 3: Exploring the Interface

Overview of the interface

The Lifecycle Viewer interface consists of a Teamcenter perspective, associated views, the Viewing
window, toolbars, and the Status bar. As you switch between different types of documents (2D, 3D, or
ECAD), the toolbars and menus update for the type of active document. The figure below shows the
default 3D interface, with two visible views: the Assembly and the Navigator views.

1 Views Enable you to perform such tasks as displaying the

product structure or showing and hiding 2D image layers.
2 Viewing window Displays your 3D model or 2D image. When you open
multiple files, the 3D model or 2D image associated with
each file appears in a separate Viewing window.
As you switch between viewing windows, the supporting
views update for the contents of the active viewing
window.
3 Status bar Displays information about the current state of the
product, including the amount of memory that is available
for 3D documents.

PLM00109 11.6 Getting Started with Product Visualization 3-1

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Working with windows and views

Overview of visualization views and windows

Visualization views in the Lifecycle Viewer make up a view network where a primary view is always
active and may be implicitly associated with one or more secondary views. Primary views are the
active Viewing windows where you can interact with 2D images or 3D models. Secondary visualization
views display information about the 2D image or 3D model contained in the active primary view.
Examples of secondary visualization views include the Assembly, Snapshots, and PMI views.
You can open multiple visualization files at once, with each file residing in a unique primary view, only
one of which is active at a time. Secondary visualization views always display information related
to the active primary view. When you switch from one primary view to another, all secondary views
update automatically to reflect the newly active image or model. You cannot open more than one
instance of each secondary visualization view at a time.

1 Secondary visualization Secondary visualization views display information about

views the 2D image or 3D model contained in the active primary
view. This example shows the Assembly and Navigator
views, which are outlined in yellow to indicate their
relation to the active primary view.
2 Primary visualization views Primary visualization views are the main Viewing windows
where you can interact with 2D images or 3D models.
This example shows two primary views, each of which
contains a 3D model. The active view is outlined in yellow,
which matches the related Assembly and Navigator
views. The inactive view is outlined in blue and not
currently related to any secondary visualization views.

3-2 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Move windows and views around your workspace

Do one of the following:
• Click the window or view header bar and drag the window around the interface.

• Right-click the view or window tab, choose Move and then select what you want to move from the
shortcut menu.
The window or view moves with your mouse pointer around the screen.
As you move the window or view the cursor changes to indicate where the view will be docked
when you release the mouse button. For example, indicates that the view will be placed at
the top of the window.

Nota

The stack cursor appears as you drag the view across other views indicating that you
can rearrange the views or move a view into the view group.

Control window and view docking

• Right-click the Viewing window or view, and select or clear Detached.
The window or view floats in the interface and you can move it anywhere in your screen area.
When a window or view is detached, a title bar appears.

Show or hide visualization views

You can show or hide secondary views, such as the Navigator and the Assembly view.
• Do any of the following:

To Do this
Display a secondary view o On the upper right side of a primary
visualization view (the main Viewing window
that displays a 2D image or 3D model), click
the arrow and select a view.

Close a view Do one of the following:

o On the view tab, click X.

o Right-click the view tab and choose Close.

Nota
To reset the Lifecycle Viewer to its default state, choose Window→Reset Perspective.

PLM00109 11.6 Getting Started with Product Visualization 3-3

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

List of visualization views

Assembly view

Use the Assembly view to work with 2D images, 3D models, and ECAD documents in the
Lifecycle Viewer.

Compare view

Use the Compare view to display ECAD document differences between two opened ECAD
documents. You can display differences from one design revision to other revisions, and you can
display differences between a PCB and its schematic design. When you highlight differences on the
Compare view, the ECAD object is centered and highlighted in the Viewing window. You can also
display differences by selecting View Differences from the compare shortcut menu.

3-4 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Constraints view

Use the Constraints view to work with constraints in the Lifecycle Viewer.

PLM00109 11.6 Getting Started with Product Visualization 3-5

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Cross Sections view

Use the Cross Sections view to work with 3D cross sections in the Lifecycle Viewer.

ECAD DFX view

Use the ECAD DFX view to work with ECAD rules-based analysis in the Lifecycle Viewer.

3-6 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

ECAD Layer view

Use the ECAD Layer view to show, hide, and otherwise manipulate ECAD layers in the Lifecycle
Viewer.

PLM00109 11.6 Getting Started with Product Visualization 3-7

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Groups view

Use the Groups view to show, hide, and select part groups in the Lifecycle Viewer.

Navigator view

Introduction to the Navigator view

Use the Navigator view to zoom in quickly for a closer look at 2D images and 3D models in
the Lifecycle Viewer.

3-8 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Zoom to a portion of your image or model with the Navigator view

You can zoom and pan your view in the Viewing window by selecting a portion of the full view to
display in the Viewing window. The result is the same using Fit All and then Zoom Area in the
Viewing window.
1. In the Navigator view, place the cursor over a portion of the image or model.

2. Hold the left mouse button and move the cursor.

The view box in the Navigator view is redrawn to enclose the area you have indicated. When you
release the mouse button, the portion of the image or model inside the view box in the Navigator
view is displayed in the Viewing window. A red view box in the Navigator view identifies the
portion of the image or model displayed in the Viewing window.

Change your lookat point with the Navigator view

You can pan your view in the Viewing window by picking a new lookat point in the full view without
zooming. This is similar to using Pan or Seek in the Viewing window, but with the Navigator view,
you can pick a lookat point that is outside of your Viewing window.
• In the Navigator view, click the point that you want to center in the Viewing window.
The view box moves to the portion of the image or model you select, and the view in the Viewing
window changes.

PMI view

Use the PMI view to manipulate Product and Manufacturing Information (PMI) in the Lifecycle
Viewer.

PLM00109 11.6 Getting Started with Product Visualization 3-9

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Paths view

Use the Paths view to work with motion documents in the Lifecycle Viewer.

Snapshots view

Use the Snapshots view to activate and manipulate snapshots of your 2D image or 3D model in
the Lifecycle Viewer.

3-10 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Image Preview view

Use the Image Preview view to display 2D raster images associated with items, item revisions,
and datasets in My Teamcenter.

PLM00109 11.6 Getting Started with Product Visualization 3-11

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

JT Preview view

Use the JT Preview view to display .jt parts associated with items, item revisions, and datasets in
My Teamcenter.

Viewing window

Send open 2D or 3D documents to new Viewing windows

You can create a new instance of the active visualization document view. When you have a
single document open in multiple views, while the session is active you can manipulate the model
independently in each Viewing window.

Exemplo
A single 3D model is displayed in two separate 3D views. Each view shows different parts
from the model, a different viewing angle, and unique 3D elements, such as a markup, a
measurement, and a cross section.

3-12 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

1. Click the 2D or 3D view that you want to send to a new window to make it active.

2. Choose Window→New Window.

A copy of the view is created.

Clone the 3D Viewing window

You can create an exact copy of the active visualization document view, including 3D elements
such as the current visibility state and markups.
1. Click the 3D view that you want to clone to make it active.

2. Choose Window→Clone Window.

A copy of the active 3D view is created.

Working with toolbars

Display or hide toolbars

• Choose Toolbars, and then select or clear the check box to the left of the toolbar name.

PLM00109 11.6 Getting Started with Product Visualization 3-13

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Nota
If the functions associated with a toolbar are not enabled, the toolbar buttons are grayed
out.

Dica
To change the display of all toolbars at once, choose Windows→Toolbars.

Move toolbars
1. Place the cursor on the handle of a visualization toolbar. The handle is the vertical line on the
left of the toolbar, as shown below:

2. Drag the toolbar to a new position within the toolbar area.

Dock toolbars on Linux and Mac

On Mac and Linux, you can dock toolbars on the top, bottom, left, and right sides of the application
window. You can also move a toolbar to the beginning or end of a line of toolbars.
1. Choose View→Toolbars.

2. In the Toolbars dialog box, click the name of a toolbar to move.

3. Click Reposition Toolbar and choose where to place the toolbar.

The toolbar is displayed in the specified location.

Float toolbars on Mac and Linux

On Mac and Linux, you can add one or more toolbars to a Toolbars dialog window that floats over
the Viewing window. On Linux, you can also see the floating Toolbars dialog window in full screen
and immersive modes when you cannot see docked toolbars.
1. Choose View→Toolbars.

2. In the Toolbars dialog box, click the name of a toolbar to display in the floating Toolbars
dialog window.

3. Click Reposition Toolbar and choose Move to Dialog.

The selected toolbar is displayed in the floating Toolbars dialog window.

4. (Optional) To add another toolbar, right-click the background of the floating Toolbars dialog
window and choose a toolbar to add.

3-14 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

5. (Optional) To remove a toolbar, right-click the background of the floating Toolbars dialog window
and choose a toolbar to remove.

6. To close the Toolbars dialog window, remove all its toolbars.

List of toolbars

2D Adjust toolbar
Use the command buttons on the 2D Adjust toolbar to adjust 2D markup layers and to align vector
and raster points associated with similar 2D files. The result of these 2D markup layer adjustments
appear in the Viewing window.

Use this option To do this

Enable Adjust Activate and deactivate the 2D markup layer feature.

Translate Pan or move the selected markup layer.

Scale Zoom in and out of the selected markup layer.

Rotate Rotate the selected markup layer.

Align a point on one markup layer with a point on another
Align Vector One Point
layer.
Align two points on one markup layer with two points on
Align Vector Two Points
another layer.
Align a point on one markup layer with a point on another
Align Raster One Point
layer.
Align two points on one markup layer with two points on
Align Raster Two Points
another layer.
If you do this This happens
All adjustments to the
Insert or create the selected
markup layer are cleared
2D image layer in the
and the markup returns to
current work session
its original position.
All adjustments made
Open the selected 2D image to the opened sessions
Reset layer by opening a session file are cleared and the
(VF) file or a PVL file. markup returns to the saved
sessions file position.

Nota
Click Reset again to clear all the adjustments
made to the selected layer, including adjustments
from the saved session.

PLM00109 11.6 Getting Started with Product Visualization 3-15

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

The markup layer returns to its original position.

Clicking Reset a third time returns the selected
layer back to the saved session position. In other
words, clicking Reset switches the markup layer
between a "clear" and an "as-loaded" state.

2D Compare toolbar

Use the option buttons on the 2D Compare toolbar to compare 2D image layers in the Viewing
window.

Use this option To do this

Compare Layers Create a comparison layer.

Display 1st Layer Display only the first layer in a comparison.

Display 2nd Layer Display only the second layer in a comparison.

Display only the comparison layer.
The comparison layer shows either the common elements
Display Compare Layer from both comparison layers or the elements that are
unique to the first or second layers. This definition is set
either in preferences or by the Toggle Layer Definition
command.
Display both the first and second layers, and also the
Display All
comparison layer.
Clear Compare Clear the comparison layer.
Switch between either showing the common elements from
both comparison layers or the elements that are unique
to each of the layers.

Toggle Layer Definition Dica

This sets the Show overlap or Show
differences option in the Compare Preferences
dialog box.

Compare Preferences Specify compare preferences.

3-16 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

2D GD&T markup toolbar (Windows only)

You can use the GD&T Markup toolbar to insert 2D GD&T markups on 2D markup layers in the
Viewing window.

Use this option To do this

Enable GD&T Markup Activate and deactivate the 2D GD&T markup feature.

GD&T Annotation Editor Open the GD&T Annotation Editor dialog box.

Stack Mode Enable or disable Stack Mode.

Copy GD&T Annotation Copy a GD&T annotation.

Paste GD&T Annotation Paste a GD&T annotation.

New Layer Add a new GD&T markup layer.

GD&T Markup Preferences Specify GD&T annotation preferences.

2D Markup toolbar

You can use the markup option buttons on the 2D Markup toolbar to quickly mark up your 2D image.
You can also use the 2D Markup toolbar to access markup preferences.

Use this option To do this

Display the Markup menu and begin to markup the 2D
Enable 2D Markup
image.
Select an existing markup displayed on the 2D markup
Select
layer in the Viewing window.
Draw a marker at a selected point on the selected 2D
Freehand Marker
markup layer.
Draw a point at which two lines intersect on the selected
Intersection Marker
2D markup layer.
Draw a midpoint of two points on the selected 2D markup
Midpoint Marker
layer.
Draw a centerpoint of a circle or arc on the selected 2D
Centerpoint Marker
markup layer.
Freehand Line Draw a freehand line on the selected 2D markup layer.

Leader Line Draw a leader line on the selected 2D markup layer.

Line Draw a straight line on the selected 2D markup layer.

PLM00109 11.6 Getting Started with Product Visualization 3-17

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Polyline Draw a polyline on the selected 2D markup layer.

Ellipse Draw an ellipse on the selected 2D markup layer.

Polygon Draw a polygon on the selected layer.

Rectangle Draw a rectangle on the selected 2D markup layer.

Restricted Text Specify a bounding box you want your text to fit into.

Unrestricted Text Write text on the selected 2D markup layer.

Inset a 2D image from a file onto the selected 2D markup
Inset Image
layer.
Write prepared text from a rubber stamp .TXT file on the
Rubber Stamp
selected layer.
New Layers Add a new 2D markup layer.

Markup Preferences Specify the preferences of various 2D markups.

2D Measurement toolbar

You can use the measurement options on the 2D Measurement toolbar to make angle, radial, and
linear measurements on the base file or on 2D markup layers.

Use this option To do this

Enable Measurement Enable 2D measurements.

Calibrate Vector Calibrate the system for vector measurements.

Calibrate Raster Calibrate the system for raster measurements.

Vector Linear Measure a line by selecting points on the image.

Measure the radius of an arc or circle by selecting points
Vector Radial
on the image.
Measure an angle by selecting three points on the image
Vector 3 Pt Angular
(one endpoint, vertex, and then a second endpoint).
Measure the angle between two non-intersecting lines on
Vector 4 Pt Angular the image (both endpoints of one line, then both endpoints
of a second line).
Raster Linear Measure a line by selecting pixels.

Raster Radial Measure the radius of an arc or circle.

3-18 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Raster 3 Pt Angular Measure an angle by selecting three points on the image.

Raster 4 Pt Angular Measure the angle between two non-intersecting lines.

New Layer Create a new markup layer.

Persist Measurements Maintain measurement results as markups.

Measurement Preferences Set 2D measurement preferences.

2D Multipage toolbar

Use the 2D Multipage toolbar to navigate among pages in multiple-page 2D images or documents.

Use this option To do this

First Page Go to the first page in a multiple-page image.

Previous Page Go to the previous page in a multiple-page image.

Next Page Go to the next page in a multiple-page image.

Last Page Go to the last page in a multiple-page image.

Go To Page Go to a specific page in a multiple-page image.

2D Viewing toolbar

Use the 2D Viewing toolbar to quickly manage or change how you view your image in the Viewing
window.

Use this option To do this

Fit All Fit the entire image into the Viewing window.
Size the view to the extent of the first layer in a series of
layers.

Base View Nota

If you only have one layer in your Viewing
window, this option works the same as Fit All.

PLM00109 11.6 Getting Started with Product Visualization 3-19

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

• Select hyperlinks.

Browse • Display screen tips.

• (Windows only) Display contents of PDF sticky notes.

Zoom Area Zoom to a specific area of the image.

Seek Center a point of the image.

Pan Move the image in the plane of the Viewing window.

Zoom Move closer to or farther from the image.

Zoom In Move closer to your image in the Viewing window.

Zoom Out Move farther from your image in the Viewing window.

Rotate Counterclockwise Rotate your image 90 degrees counterclockwise.

Rotate Clockwise Rotate your image 90 degrees clockwise

Flip Horizontal Flip your image 180 degrees horizontally.

Flip Vertical Flip your image to a vertical position.

(Windows only) Copy the image in the Viewing window to
Copy Image
the clipboard.
(Windows only) Copy a section of the image to the
Copy Region
clipboard.
(Windows only) When a PDF is opened in the viewer,
Search
search for text strings in the document.

3D Alignment toolbar

Use the 3D Alignment toolbar to move individual parts or groups of parts and align them to other
parts in the Viewing window.

Use this option To do this

3D Alignment Activate and deactivate the alignment feature.

Preview Alignment Align the parts as specified by the constraints.

Accept Alignment Accept the current alignment and move the part.
Display an alternate alignment that conforms to
Next Alignment
the constraints.

3-20 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Clear all alignment and return the part to its
Cancel Alignment
original position.
Set or change the primary alignment constraints
Primary Constraints
on parts.
Secondary Set or change the secondary alignment
Constraints constraints on parts.
Set or change the tertiary alignment constraints
Tertiary Constraints
on parts.

3D Appearance toolbar

Use the 3D Appearance toolbar to work with part appearance.

Use this option To do this

Quick Color Tool Display the Quick Color dialog box.

Edit Materials Display the Material page of the Appearance Editor.

Load Images Display the Image page of the Appearance Editor.

Edit Texture Coordinates Display the Texture page of the Appearance Editor.

Edit Lights Display the Light page of the Appearance Editor.

Material Palette Display the Material page of the Appearance Palette.

Image Palette Display the Image page of the Appearance Palette.

Display the Texture Coordinate page of the Appearance
Texture Coordinate Palette
Palette.
Light Palette Display the Light page of the Appearance Palette.

Color Range Tool Display the Color Range Tool.

Appearance Preferences Display the Preferences dialog box.

3D CAE Viewing toolbar

Use the 3D CAE Viewing toolbar to set display options for your 3D model as well as annotation
appearance preferences.

PLM00109 11.6 Getting Started with Product Visualization 3-21

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Activate and deactivate the 3D CAE viewing feature.

Nota
Enable CAE Results
Viewing If no CAE data exists in your model, a warning
message is displayed when you attempt to
enable the CAE functionality.

Display Options Set color bar, lighting, and results display options.
Probe the 3D model for CAE results values at specific node
Identify
or element locations.
Annotations Annotate CAE results.

CAE Preferences Set appearance preferences for annotations.

3D Clearance toolbar

Use the Clearance toolbar to check the clearance of parts in your model.

Use this option To do this

Enable Clearance Analysis Start checking clearance.

Set Clearance Set a clearance distance.

Create a list of all elements that come within the clearance
Matrix Clearance
distance of other elements.
Identify elements that come within the clearance distance
Selected Clearance
of the selected elements.
Check the clearance of all elements in the file and whether
All Elements
or not the elements are loaded.
Check the clearance of elements that are loaded and
Loaded Elements
whether or not the elements are visible.
Visible Elements Check the clearance of visible elements.
Identify elements that move to within the clearance distance
Dynamic Clearance
when the model is in motion.
Go to the previous result in the General Clearance Results
Previous Result
window or Clearance Navigation & Analysis dialog box.
Go to the next result in the General Clearance Results
Next Result
window or Clearance Navigation & Analysis dialog box.
Go to the previous region in the Clearance Navigation &
Previous Region
Analysis dialog box.

3-22 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Go to the next region in the Clearance Navigation &
Next Region
Analysis dialog box.
Navigate between clearance results and their related
Analyze Clearance contact and penetration regions of violations using the
Clearance Navigation & Analysis dialog box.
Clear Analysis Clear all results in the General Clearance Results window.

Results Window Show or hide the General Clearance Results window.

Load a clearance results file or a Clearance Database
Load Results
Connection (.dbc) file.
Automatically load the last clearance results file or
Quick-load results Clearance Database Connection (.dbc) file that was
opened or saved.
Results Preferences Set preferences for clearance results.

3D Comparison toolbar
Use the 3D Comparison toolbar to compare the geometry of two sets of parts or two or more models
in multiple Viewing windows.

Use this option To do this

Enable Comparison Activate and deactivate the comparison feature.

Set Part Group 1 Specify the first set of parts to compare.

Show Part Group 1 Display the parts of group 1.

Set Part Group 2 Specify the second group of parts to compare.

Show Part Group 2 Display the parts of group 2.

Multiple window Start a side by side comparison of the contents of multiple
comparison 3D Viewing windows.
Synchronize the navigation cameras for the Viewing
Synchronized Viewing
windows involved in the comparison.
Reposition Windows Re-tile the Viewing windows.
Display the parts of group 1 in one color, the parts of group
Tricolor Mapping 2 in a second color, and the parts that are the same in
a third color.
Display the parts in a range of colors that identify the
Distance Mapping
distance between the two parts.
Compare Preferences Change the colors of compared parts.

PLM00109 11.6 Getting Started with Product Visualization 3-23

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

3D Constraints toolbar
Use the 3D Constraints toolbar to add constraints and manage constraint files.

Use this option To do this

Enable Constraints Activate and deactivate the constraints feature.

Open Constraint File Open an existing constraint file.

New Constraint File Open a new constraint file.

Create Constraint Add a constraint.

Save Constraint File Save the active constraint file.

Save the active constraint file and optionally specify a new
Save As Constraint File
name and path.
Constraint Preferences Set constraint behavior and appearance preferences

3D Coordinate System toolbar

Use the 3D Coordinate System toolbar to work with User Defined and PMI coordinate systems.

Use this option To do this

Create Coordinate System Create a new coordinate system.
Delete Selected
Delete the selected coordinate system.
Coordinate System
Manage Coordinate
Manage coordinate systems.
Systems
Manipulate Selected Use a manipulator to reposition the selected coordinate
Coordinate System system.
Edit Selected Coordinate
Edit the properties of a coordinate system.
System
Align View To Selected
Align your view to the XY plane of a coordinate system.
Coordinate System
Align Part To Selected
Align a part or assembly to a coordinate system.
Coordinate System
Coordinate System
Change coordinate system preferences.
Preferences

3D GD&T Markup toolbar (Windows only)

You can use the 3D GD&T Markup toolbar to quickly insert GD&T Markups on your 3D models.

3-24 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Enable GD&T Markup Activate and deactivate the GD&T markup feature.

GD&T Annotation Editor Open the GD&T Annotation Editor.

Anchor Mode Select and clear Anchor Mode.

Stack Mode Select and clear Stack Mode.

Copy GD&T Annotation Copy a GD&T annotation.

Paste GD&T Annotation Paste a GD&T annotation.

New Layer Add a new GD&T markup layer.

GD&T Markup Preferences Specify GD&T annotation properties.

3D Groups toolbar

Use the 3D Groups toolbar to create and manage groups of parts.

Use this option To do this

Add Group (Visible) Create a group that includes all the visible parts.

Add Group (Selected) Create a group that includes all the selected parts.

Single Group Only Display only the groups that are checked.

Delete Group Remove the selected groups.

Replace the parts in the selected group with the parts that
Replace Group (Visible)
are visible in the Viewing window.
Replace the parts in the selected group with the parts that
Replace Group (Selected)
are selected in the Viewing window.

3D Markup toolbar

Use the 3D Markup toolbar to add text or graphical elements on your 3D model in the Viewing window.

Use this option To do this

3D Markup Enable the 3D markup feature.

PLM00109 11.6 Getting Started with Product Visualization 3-25

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

New Layers Create a new 3D markup layer.

Select Select an existing markup.

Freehand Draw a freehand line.

Line Draw a straight line.

Polyline Draw a polyline.

Ellipse Draw an ellipse or circle.

Polygon Draw a polygon.

Rectangle Draw a rectangle or square.

Inset Image Add an image.

Text Draw text.

Anchor Mode Attach the markups you draw to parts of the model.

Fill Mode Draw filled rectangle, polygon, ellipse, or text markups.

Create anchored text which is added to either selected or
Auto Create
visible parts at once.
Add predefined text that needs to appear every time you
Predefined Text
add a text markup.
Align Align multiple anchored text markups for readability

Distribute Distribute markups as needed to evenly space them.

Position anchored text markups precisely where you want
Position
them.
Change specified properties of markups included in a
Edit Properties
filtered set of all markups.
Resequence the order callouts appear in the Viewing
Resequence Callouts
window.
Associate the visibility of anchored markups with the
View Anchored with Part
visibility of the parts they are attached to.
Remove All Remove all markups.

Manage Symbol Library Access the Symbol Manager dialog box.

Markup Preferences Change the colors, styles, and display of 3D markups.

3D Measurement toolbar

Use the 3D Measurement toolbar to measure your 3D model.

3-26 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Enable 3D Measurement Activate and deactivate the 3D measurement feature.

Single Display information about a single part feature.

Double Measure between two part features.

(Chain) Measure between a series of part features.
Chain/Fan (Fan) Measure between a part feature and a series of other
part features.
Distance Measure the distance between two part features.

Angle Measure the angle between two edges or surfaces.

Radius Measure the radius of a circular edge or surface.

Diameter Measure the diameter of a circular edge or surface.

Measure the local radius of a point on edge or a point on
Local Radius
surface.
Display the minimum distance when performing
Minimum Distance
measurements between part features.
Display the maximum distance when performing
Maximum Distance
measurements between part features.
Part Summation Display the total area, volume, and mass of a selected
Measurement set of parts.
Bounding Box Display the bounding box for a selected set of parts, and
Measurement display the measurements of the bounding box.
Part Set Measurement Display the distance between two sets of parts.

Clear Clear all measurements.

Undo Pick Clear the last part feature you picked.

Create measurement reports.

Nota
Reports
This button is only available if you have a product
that supports measurement reports.

Measurement Preferences Specify the 3D measurement preferences.

PLM00109 11.6 Getting Started with Product Visualization 3-27

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

3D MMV toolbar
Use the 3D MMV toolbar to control which parts of the 3D model are fully loaded. When in MMV
mode, you can choose to load complete parts for the entire 3D model, visible parts only, or selected
parts only.

Use this option To do this

Exit MMV Fully load the entire 3D model.

Disable MMV Visible Fully load all visible parts.

Disable MMV Selected Fully load all selected parts.

3D Motion toolbar
Use the 3D Motion toolbar to manage motion documents.

Use this option To do this

Open Motion File Add a motion document to the current session.

New Motion File Create a new motion document.

Save Motion File Save the motion document.

Delete Remove the motion document from the current session.

Create a new path and add it to the end of the current list of
New Path
paths in the motion document.
Insert a new key frame after the currently selected key
Insert Key Frame
frame node.
Edit Key Frame Edit the currently selected key frame node.

Preview Quickly view the motion without modifying the play list.

Motion Playback Play motion documents and view the play list.

Reset All Parts Reset all parts to their original locations.

Motion Playback
Specify default settings for motion documents.
Preferences

3D Movie Capture toolbar

Use the 3D Movie Capture toolbar to capture the contents of the Viewing window as you move
the camera around, show or hide parts, transform parts, play animation sequences, and play .vfm
motion files associated with your model.

3-28 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Record Record a movie.

Stop Stop recording.

Movie Capture Preferences Set record and playback speeds and compression.

3D Navigation toolbar

Use the 3D Navigation toolbar to manipulate the 3D view.

Option name Use this button to

Examine Activate Examine mode.

Fly Activate Fly mode.

Explore Activate Explore mode.

Previous View Return to the last static view.

Next View Move to the next static view

Fit All Fit all visible parts of the model into the Viewing window.

Zoom Area Zoom to a specific area of the model.

Seek Center a point of the model. This point becomes the center of rotation.

Rotate Rotate your model in the Viewing window.

Pan Pan the model in the plane of the Viewing window.

Navigate Move closer to or farther from the model.

Position Choose an Explore mode start position on a part surface.

Level Return your view to level in Fly and Explore modes.

Terrain In Fly or Explore mode, remain a specified distance above the "floor"
Following upon which you are flying or exploring.
Collision In Fly or Explore modes, stop moving when you come into contact
Detection with a part.
In Explore mode, return to the location and position you were at when
Go Home
you last selected Set Home.

PLM00109 11.6 Getting Started with Product Visualization 3-29

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Option name Use this button to

In Explore mode, make the current location and position your home
Set Home
location.
Automatic Continuously rotate the navigation camera around the model, creating
Motion a spinning turntable effect.
Navigation
Set 3D navigation preferences for the active navigation mode.
Preferences

3D Standard Views toolbar

Use the 3D Standard Views toolbar to examine your model from different views.

Use this option To do this

Enable View Control Open the Rotate dialog box to view or rotate the model.
Open the Standard Views dialog box to view or rotate the
Standard Views
model, or position the camera.
View Clipping Add a near and a far clipping plane to the Viewing window.

Rotate Up Rotate the model up 90 degrees.

Rotate Down Rotate the model down 90 degrees.

Rotate Left Rotate the model 90 degrees to the left.

Rotate Right Rotate the model 90 degrees to the right.

Rotate Clockwise Rotate the model clockwise 90 degrees.

Rotate Counterclockwise Rotate the model counter-clockwise 90 degrees.

Align the plane to the positive or negative X, Y, or Z axis,
Align to Axis
or Isometric view.

3D Part Edit toolbar

Use the 3D Part Edit toolbar to view and modify model LODs.

Use this option To do this

Enable Part Edit Activate and deactivate the part edit feature.
Control model LODs, and define a working set of parts for
Control
use in geometry simplification.
B-Rep Reverse B-Rep face orientation.

3-30 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Tessellation Tessellate parts.

Visibility Simplify parts based upon visibility.

Decimation Simplify parts based upon a specified triangle reduction.

Part Edit Preferences Specify Part Edit Preferences.

3D Part Manipulation toolbar

Use the 3D Part Manipulation toolbar to manipulate parts interactively.

Use this option To do this

Enable Part Manipulation Activate and deactivate part manipulation mode.
Manipulate selected parts using the screen coordinate
Use Screen Coordinates
system.
Manipulate selected parts using the global coordinate
Use Global Coordinates
system.
Use Part Coordinates Manipulate selected parts using the part coordinate system.

X-Axis Translate selected parts along the X axis.

Y-Axis Translate selected parts along the Y axis.

Z-Axis Translate selected parts along the Z axis.

XY-Plane Translate selected parts along the XY plane.

XZ-Plane Translate selected parts along the XZ plane.

YZ-Plane Translate selected parts along the YZ plane.

Reset to Original Position Return selected parts to the original position.

3D Part Transformation toolbar

Use the 3D Part Transformation toolbar to translate, rotate, and scale parts in your model.

Use this option To do this

Add Part Display an interactive manipulator for the selected part.

Remove Remove the active manipulator.

PLM00109 11.6 Getting Started with Product Visualization 3-31

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Reset Manipulator Position Return the active manipulator to its original position.
Translate, rotate, and scale parts by using the using the
Transform
Part Transformation dialog box.
Relocate Move and rotate parts from one location to another.

3D Performance toolbar

Use the 3D Performance toolbar to change the performance preferences for your 3D model.

Use this option To do this

Save 1-5 performance settings that can be accessed by
Performance Setting 1 - 5
selecting the specified options.
Stop the loading of your 3D model.

Stop Streaming Nota

This button is only active during loading.

Set the performance for Culling, Rendering, Memory, and

Edit Performance Settings
change Toolbar options.

3D PMI toolbar

Use the PMI toolbar to display and control product and manufacturing information in your model.

Use this option To do this

Enable PMI Activate and deactivate the PMI feature.
(For JT models containing feature level designs) PMI for all
faces and edges associated with the feature level.

Feature-based Multiple Nota

Entity Mode
If you use this option and the JT model does not
contain a feature level, PMI is displayed from the
selected face and all its edges.

Multiple Entity Mode Display all the PMI for a model.

Single Entity Mode Display each PMI one at a time.

3-32 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Previous Entity (For Single Entity Mode) Display the previous PMI.

Next Entity (For Single Entity Mode) Display the next PMI.

Filter Configuration Filter out specific types of PMI.

Text Orientation Change the orientation of PMI text.

Display all PMI in the PMI list, without changing the
Fit View to Selected
direction or orientation of the camera.
Palette Display the Model View Palette.

Clear Entities Turn off the display of all PMI.

PMI Preferences Set PMI appearance and behavior preferences.

3D Section toolbar

Use the 3D Section toolbar to work with cross sections of your 3D model.

Use this option To do this

Enable 3D Section Enable the 3D Section functionality.
Create a cross section, normal to the Z-axis, in the current
Create Section
3D view.
Create Grid Create a grid, normal to the Z-axis, in the current 3D view.
Create multiple cross section views along an axis, along a
Create Series
linear edge, or between two points.
Create Section Along
Create a cross section positioned along a curve.
Curve
Delete Section Delete the active cross section in the current 3D view.

Delete All Delete all cross sections.

Clip Near Clip away the near side of the model.

Clip Far Clip away the far side of the model.

Clip away the model on both sides of the plane, leaving
Clip Both
only the section lines.
Plane View Align the view normal to the section plane.

Align To Feature Align the cross section plane to a feature of the model.

PLM00109 11.6 Getting Started with Product Visualization 3-33

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Show or hide the Position Plane dialog box to position
Position Plane
section planes
Show and hide a 3D manipulator to dynamically move and
3D Manipulator
rotate the section plane.
Display the active section or section series in the Cross
Show in Viewer
Section Viewer.
Create cross section reports that can include analysis of
the section area or perimeter, moment of inertia, center of
gravity, and other calculated cross section properties.

Create Report
Nota
Only Perimeter and Area are available if the
model does not contain B-Rep data.

Update cross section rendering when the Fast Mode

Manual Update
section preference is active.
Change the settings for general cross section features, the
Section Preferences
grid, and clipping display.

3D Selection toolbar
Use the 3D Selection toolbar to pick part features.

Use this option To do this

Point Pick a point on the part.

Vertex Pick a vertex on the part.

Arc Center Pick the center of an arc

Midpoint Pick the midpoint of a line or arc

Point on Edge Pick a point on an edge

Edge Pick an edge on the part.

Surface Pick a surface on the part.

Part Pick the entire part.

Disable Active Tool Disable the active tool, for example, 3D Measurement.

User Defined Point Type the coordinates of a point.

Construct Midpoint Pick a point midway between two points.

3-34 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Intersection Pick the intersection of two edges.
Pick the center of a circular arc you define by picking three
3Point Circular Arc
points.
Select Parts by Area Select parts within an area that you define.

Select Parts by Volume Select parts within a volume that you define.
Pick Through Unshaded Pick geometry visible through parts displayed in the
Parts tessellated or feature lines display modes.
Generate Selection If it does not already exist, generate the data required for
Preview Data part feature selection preview.
3D Selection Preferences Change the settings for selection and selection preview.

3D Display Modes toolbar

Use the 3D Display Modes toolbar to control the display mode of geometry in the 3D Viewing
window. You can display geometry as shaded, tessellated lines, feature lines, or any combination
of the above. Tessellation or feature lines hidden by other geometry can be viewed as normal,
semi-transparent, or invisible.

Nota
Hidden lines invisible, Hidden lines ghosted and Hidden lines visible are only enabled
if the default display mode is set to Tessellation Lines, Feature Lines, or both. The
default display mode can be set on the Display page of the 3D Viewing preferences dialog
box, or on the 3D Display Modes toolbar when no parts are selected. If any parts are
selected, changing the display mode with the toolbar only changes the display mode for
the selected parts.

Use this option To do this

Draw shaded model Display geometry in the shaded rendering style.
Display Construction
Display wireframe construction geometry.
Geometry
Draw tessellation lines Display geometry in the tessellation line rendering style.

Draw feature lines Display geometry in the feature line rendering style.

Hidden lines invisible Remove hidden tessellation or feature lines from view.
Display hidden tessellation or feature lines in a
Hidden lines ghosted
semi-transparent rendering style.

PLM00109 11.6 Getting Started with Product Visualization 3-35

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Display hidden tessellation or feature lines in a fully visible
Hidden lines visible
rendering style.
Clear All Reset the display modes for all parts.

See-Thru Solids Display all solid geometry as transparent.

3D Surface Analysis toolbar

Use the 3D Surface Analysis toolbar to evaluate part surfaces.

Use this option To do this

Multi-Effect Display a combination of surface analysis effects.

Reflection Apply reflections to your part surfaces.

Flow Lines Apply flow lines to part surfaces.

Shade parts based upon the curvature values of their
Curvature
surfaces.
Random Colors Apply random colors to part surfaces.

Hide Effects Hide surface analysis effects in the Viewing window.

Create a new working set of parts based upon part
Set Working Set
selection or visibility in the Viewing window.
Workspace Manage surface analysis settings and effects.
Surface Analysis
Adjust the surface analysis preferences.
Preferences

3D Thrustline Editor toolbar

Use the 3D Thrustline Editor toolbar to create and manipulate thrustlines.

Use this option To do this

Enable Thrustline Activate and deactivate the thrustline feature.

Align to Part Feature Create a part feature aligned thrustline.

Delete Thrustline Delete the currently selected thrustline.

New Layer Create a new layer in the 3D scene.

3-36 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Thrustline Preferences Edit thrustline preferences.

3D True Shading toolbar

Use the 3D True Shading toolbar to quickly change the appearance of 3D models via predefined
visual effects.

Use this option To do this

True Shading Activate and deactivate the true shading effects feature.
Choose a predefined material that affects the appearance
Global Materials
of the entire model.
Choose a predefined reflection that affects the appearance
of the entire model.

Global Reflections Nota

Parts assigned True Shading materials such as
rubber are not included in global reflections.

Occurrence Specific Choose a predefined material that affects the appearance

Materials of selected parts or assemblies.
Backgrounds Choose a background color, gradient, or image.
Apply True Shading Turn True Shading materials and global reflections on or
Materials off in the Viewing window.
Show Floor Display a floor in the 3D scene.

Floor Grid Display a grid upon the floor in the 3D scene.

Display a reflection of the 3D model upon the floor in the
Show Floor Reflection
3D scene.
Display a shadow of the 3D model upon the floor in the
Floor Shadows
3D scene.
True Shading Editor Adjust True Shading settings in the True Shading Editor.

3D Visibility toolbar

Use the 3D Visibility toolbar to hide obscuring parts and clip areas of your model.

PLM00109 11.6 Getting Started with Product Visualization 3-37

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Hide parts that obscure your view of specified parts by
Hide Obscuring
making the obscuring parts transparent.
Create manipulators to control the area of your model that
Add Clipping Manipulator
you want to hide.
Remove Clipping
Remove manipulators from your model.
Manipulator
Hide Manipulators Hide the manipulators and motion jacks.

Hide Jacks Hide the motion jacks, but not the manipulators.

Clip Inside Hide the area inside the manipulator.

Clip Outside Hide the area outside the manipulator.

View Properties Access the View Clipping Properties settings.

3D Visual Report toolbar

Use the 3D Visual Report toolbar options to create visual reports and apply them to the parts and
assemblies. For example, you can search the properties of parts and create a visual report that
shows all metal parts in a specific color. You can also reset the appearance of parts and assemblies,
as well as specify visual report preferences.

Use this option To do this

Enable Visual Report Activate and deactive the Visual Report feature.
Open the Apply Report dialog box.
Apply Report Use the Apply Report dialog box to edit and load existing
visual reports.
Open the Quick Report dialog box.
Quick Report Use the Quick Report dialog box to quickly identify the
parts that match your metadata search query.
Open the Single Rule Report dialog box.

Single Report Use the Single Rule Report dialog box to generate
metadata search conditions and to specify how you want
matched and unmatched parts displayed.
Open the Multiple Rules Report dialog box.
Multiple Reports Use the Multiple Rules Report dialog box to generate
multiple metadata search conditions.

3-38 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Display detailed information about completed visual
reports. This information includes details as the current
Report Legend
rule name and scope, names of parts, and the attributes
and values used in the report.
Open the Report Explore dialog box.
Explore Reports Use the Report Explore dialog box to set options for how
you view the results of your visual report.
Discard visual changes and return to the original visual
Reset Reports
representation.
Specify the default options for various visual reports
Visual Report Preferences
preferences.

ECAD Base toolbar

Use the ECAD Base toolbar to manage specific ECAD functionality such as specifying side views,
changing layer characteristics, navigating nets, creating reports, and setting cross probing for both
the PCB and schematic.

Use this option To do this

View Top and Bottom Side Specify the order in which you view document layers.
View the top or bottom side depending on the side that is
View Opposite Side
currently showing.
Change layer colors and layer visibility states. Use the
Layer Color
Layer Color dialog box to manage these options.
Search for objects by using the options associated with
Search
the Search dialog box.
Open the Reports dialog box to create and run various
Create Report
ECAD reports.
Explore both the PCB and schematic in one Viewing
Cross Probe
window.
Move the net marker to the previous point in navigating
Previous
the net.
Next Move the net marker to the next point in navigating the net.

Visual Compare Compare the differences between two ECAD documents.

Display document property data by using the Properties
PCB Properties
dialog box.

ECAD DFx toolbar

Use the DFx toolbar to manage how you want to evaluate and analyze your designs against
manufacturing rules.

PLM00109 11.6 Getting Started with Product Visualization 3-39

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Open the Open Rules dialog box and select a configuration
Open Rules File
file containing the rules for evaluating the open PCB.
Open the DFx Rule Set Editor dialog box to review and
Edit Rules File
modify Design for Assembly and Design for Test rules.
Open a previously generated results file for the current
Open Results File
PCB.
Save the active rules file and results using the current
Save DFx Files
dataset name.
Save the active rules file and results. You will be prompted
Save DFx Files As
for a new dataset name.
Run DFx Rules Start the design evaluation on the active PCB.
Display DFx Summary Open the most recently saved summary results report for
Report the active PCB.
Open the most recently saved detail results report for the
Display DFx Detail Report
active PCB.

Nota
Most of these options require a DFx authoring license.

ECAD Markup toolbar

Use the ECAD Markup toolbar options to manage how you want to mark up ECAD documents. In
most cases, markup support applies to both the PCB and schematic documents.

Use this option To do this

Enable Markup Activate and deactivate the ECAD markup feature.
Open the Markup Topic dialog box. After selecting this
Create New Markup option, click in the Viewing window and enter a markup
topic.
Select Markup Select a markup that is displayed in the Viewing window.

Freehand Line Draw a freehand line.

Draw a straight line and optionally add leader ends to the
Leader Line
line.
Ellipse Draw an ellipse or circle on the ECAD document.

Polygon Draw a polygon on the ECAD document.

3-40 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Rectangle Draw a rectangle or a square on the ECAD document.

Text Open the Text Editor dialog box and add text markups.
Open the Rubber Stamp dialog box. Select either
Rubber Stamp auto-translate selected predefined text or select existing
predefined text from a note file.
(PCB only) Measure the distance between one point to
Distance Measurement another point, between one point to a specific location on a
line, or between one line and another line.
(PCB only) Measure the radial distance on any ring or
Radial Measurement
circle.
(PCB only) Measure the minimum distance between two
Clearance Measurement
objects.
(PCB only) Measure the distance between any point along
the trace and via contained within the same net.

Manhattan Length Nota

Manhattan length refers to the sum of the X- and
Y- distances between the two selected points.

(PCB only) Measure the distance between any point along

the trace and via contained within the same net.

Routed Length Nota

Routed length refers to sum of each segment
along the trace between the two selected points.

Open the Markup Log dialog box to display markup activity

Markup Log
related to the ECAD document.
Save Markups Save the markup in the established dataset.

Save Markups As Save the markup in a different dataset.

Markup Profile Display the Markup Profiles dialog box which contains
Preferences markup profile names and markup preferences.

ECAD Multipage toolbar

Use the ECAD Multipage toolbar to navigate among pages in a multipage ECAD document.

Use this option To do this

First Page Go to the first page in a multipage file.

PLM00109 11.6 Getting Started with Product Visualization 3-41

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Previous Page Go to the previous page in a multipage file.

Go To Page Go to a specific page in a multipage file.

Last Page Go to the last page in a multipage file.

Next Page Go to the next page in a multipage file.

ECAD Viewing toolbar

Use the ECAD Viewing toolbar to quickly manage or change how you view ECAD documents.

Use this option To do this

Fit All Fit the entire design into the Viewing window.

Base View Size the view to the extents of the PCB dimensions.
Display the name of ECAD objects as you move the cursor
Browse
around the Viewing window.
Zoom Area Zoom to a specific area of the document.

Seek Center a point on the document.

Pan Move the document around the Viewing window.

Zoom Move closer to or farther from the document.

Zoom In Move the document closer to your view.

Zoom Out Move the document farther from your view.

Rotate Counterclockwise Rotate the document 90 degrees counterclockwise.

Rotate Clockwise Rotate the document 90 degrees clockwise.

Flip Horizontal Flip the document 180 degrees horizontally.

Flip Vertical Flip the document to a vertical position.

(Windows only) Copy the image in the Viewing window to
Copy image
the clipboard.
(Windows only) Copy a section of the image to the
Copy region
clipboard.

3-42 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Image Capture toolbar

You can use the Image Capture toolbar to capture the view of your image exactly as it is displayed in
the Viewing window, including all visible markups. The captured image appears in a new Viewing
window.

Issues toolbar

Use the Issues toolbar to communicate design issues.

Use this option To do this

Add Create new visual issues.

Update Update the visual issue currently active in the Viewer.

Delete the visual issue currently active in the Viewer.

Nota
Delete
If working with Teamcenter visual issues, the
issue report and issue report revision are
deleted.

View Display the visual issues list in Issue Manager.

Printing toolbar

You can use the Printing toolbar to quick preview and print models and images.

Use this option To do this

Print Current View Print your model or image.

Print Preview Preview the image before printing.

Reconcile toolbar

Use the Reconcile toolbar to resolve broken file references to parts and assemblies.

PLM00109 11.6 Getting Started with Product Visualization 3-43

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Enable Reconcile Activate and deactivate the file reconcile feature.

Validate All References Validate references in a file.

Reconcile Broken
Create or delete file mappings.
References
Reload Session Reload the file.

Import Load a mapping file.

Export Save a mapping file.

Reconcile Preferences Specify preferences.

Snapshots toolbar

Use the Snapshots toolbar to add and manipulate snapshots of your model or image.

2D and ECAD 3D

Use this option To do this

Add Add a snapshot of the Viewing window.

Insert Insert a snapshot between two existing snapshots.

Delete Delete the selected snapshot.

Replace the selected snapshot with a snapshot of the
Replace
Viewing window.
Toggle View (3D only) Display 3D snapshots as thumbnails or a list.
Snapshots Preferences
Specify 3D snapshot preferences.
(3D only)

Tree Control toolbar

Use the Tree Control toolbar to navigate the list in the Assembly view.

Use this option To do this

Collapse All Display only the first level of the list.

Collapse One Hide the lowest level of the list that is currently showing.

3-44 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Expand One Display one more level of the list than is currently showing.

Expand All Display all levels of the list.

Find Item Search for a text string in the list.

Working with menus

Overview of menus
The menu bar provides access to much of the application's functionality. You can also right-click items
and areas to access shortcut menus.

Nota
Menus are available only in the Lifecycle Viewer. You must use toolbars to access
visualization features when working in the viewers that are embedded within Teamcenter
applications such as My Teamcenter and Structure Manager.

List of menus

Actions menu

The Actions menu is on the Menu bar. Some options are available only when a 2D or 3D file is open.

PLM00109 11.6 Getting Started with Product Visualization 3-45

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Save the view of your 2D image in the Viewing window.
Image Capture
Save the view of your 3D model in the Viewing window as a 2D image.
Movie Capture (3D) Record the movements of your model in the Viewing window as a movie.
Outline Capture (3D) Create an outline drawing of your model.
Part Manipulation
Drag parts interactively around the Viewing window.
Mode (3D)
Part Transformation
Translate, rotate, and scale parts in 3D models.
(3D)
Motion (3D) Animate your 3D model.
Generate extraction paths for parts or assemblies that need to be removed
Path Planning (3D)
from models for maintenance or replacement.
Create a graphical representation of the volume and path of a part as it
Swept Volume (3D)
moves.
Quick Color (3D) Change the color and transparency of parts and part groups.
Coordinate Systems
Create and work with coordinate systems.
(3D)
Exploded View (3D) Move parts and groups of parts specified distances along the x, y, or z axis.
Filters (3D) Constrain which parts are loaded or displayed in the Viewing window.
Inspector (3D) Examine and validate the data structure and integrity of .jt files.
Layer Filter (3D) Filter part visibility based upon the layer settings within the file.
Reference Sets Change the active reference set.
True Shading (3D) Quickly change the appearance of 3D models via predefined visual effects.
Generate part reports to examine attribute information such as angles,
Part Report (3D)
chordal lengths, and part names.
Network Settings Set cache and proxy server preferences for your browser.
(Mac and Linux) On Windows, select Internet Control Panel from the Web menu.
SSL Settings (Mac and
Configure the product for the SSL settings of your Mac and Linux system.
Linux)

Adjust menu (2D)

Open a 2D image and then add a new layer to the Base Document. The Adjust menu appears
on the Menu bar when you enable Adjust from the Tools menu.

Use this option To do this

Translate Pan (move) the selected markup layer in the Viewing window.
Scale Zoom in and out of the selected markup layer in the Viewing window.
Rotate Turn the selected markup layer in the Viewing window.

3-46 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

One Point – Align one point or position on one 2D vector markup layer with
a point on another vector 2D markup layer.
Vector Alignment
Two Points – Align two points on a vector 2D markup layer with two points
on another vector 2D markup layer.
One Point – Align one point on a raster markup image layer with one point
on another raster markup layer.
Raster Alignment
Two Points – Align two points on a raster markup layer with two points on
another raster markup layer.
If you This happens
Insert or create the selected 2D All adjustments to the markup layer are
image layer in the current work cleared and the markup returns to its
session, and then click Reset. original position.
All adjustments made to the opened
sessions file are cleared and the
markup returns to the saved sessions
file position.

Nota
Click Reset again to clear
all the adjustments made to
Reset the selected layer, including
Open the selected 2D image adjustments from the saved
layer by opening a session (VF) session.
file or PVL file, and then click
The markup layer returns to
Reset.
its original position.
Click Reset a third time
returns the selected layer
back to the saved session
position. In other words,
clicking Reset switches the
markup layer between a
"clear" and an "as-loaded"
state.

Change the view of 2D layers

Aligning vector and raster points

Alignment menu (3D)

Use the Alignment menu to align parts of 3D models to other parts. The Alignment menu appears
on the Menu bar when you choose Alignment from the Tools menu.

PLM00109 11.6 Getting Started with Product Visualization 3-47

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Primary Constraints Set or change the first part feature you pick for alignment.
Secondary
Set or change the second part feature you pick for alignment.
Constraints
Tertiary Constraints Set or change the third part feature you pick for alignment.
Preview Alignment Align the parts when the entities have been picked.
Next Alignment View the other alignments that are possible with the same constraints.
Accept Alignment Move the parts to the positions displayed in the current alignment.
Cancel Alignment Return the parts to their previous positions and clear all constraints.
Change the colors, sizes, and display of coordinate systems during
Preferences
alignment.

Assembly menu

Use the Assembly menu to work with the assembly in the Assembly view. The Assembly menu is
on the Menu bar when you choose Assembly from the Tools menu.

Use this option To do this

Expand All Display all subassemblies and parts (3D model) or all layers (2D image).
Collapse All Hide all subassemblies and parts (3D model) or all layers (2D image).
Find Find a text string in the assembly.
Retry Failed Attempt to load parts that failed to load.
Failure Report Generate a summary report of parts that failed to load.
Specify the type of information that is displayed in your reports, as well as
Failure Preferences
disabling the Reports Wizard by using the options.
Create Alt Hierarchy Use options to create an alternate hierarchy.
Use Reconcile Hierarchy to compare your assembly to the same
Reconcile Hierarchy
assembly saved in a session file.
Use Show Leaf Structure to show or hide leaf component structure in the
Show Leaf Structure
assembly tree.
Specify how you want to display model parts that you select in the Viewing
Preferences
window.
Save Indented Save the assembly as a text file.

CAE Viewing menu

The CAE Viewing menu appears on the Menu bar when you choose CAE Viewing from the Tools
menu.

Use this option To do this

Display Options Set color bar and lighting options.
Probe the 3D model for CAE results values at specific node or element
Identify
locations.
Annotations Annotate CAE results.
Preferences Set appearance preferences for annotations.

3-48 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Clearance menu

Use the Clearance menu to identify the clearance of elements in 3D models. The Clearance menu
appears on the Menu bar when you choose Clearance from the Tools menu.

Use this option To do this

Set Clearance Set the clearance distance between elements.
Identify clearance violations while playing a motion file or transforming
parts in the 3D Viewing window. To locate violations quickly, you can
Dynamic Clearance
highlight parts that move within the clearance distance of a selected part.
You can also indicate whether a results list is generated.
Stop playback of a motion file if the selected part or parts moves within the
clearance distance of another part.

Stop on Collision
Nota
This option is available only if Dynamic Clearance is selected.

Generate a list of all elements within the clearance distance of any element.

Matrix Clearance Nota

This option is not available if Dynamic Clearance is selected.

Group to Group Set up and compare multiple groups of data while avoiding checks
Clearance between elements within the same group or group set.
Selected Clearance Check for elements within the clearance distance of the selected part.
Specify which parts to check when you check clearance.
• All Elements checks all elements in your model file.

Scope • Loaded Elements checks all elements in your model file that are
loaded.

• Visible Elements checks all elements that are currently visible in

the Viewing window.
Specify the method used to visibly identify elements within the clearance
distance.
• No Action does not visibly identify elements within the clearance
distance.

Visibility Action • Show Elements displays elements within the clearance distance.

• Hide Elements hides elements within the clearance distance. Visibility

of other elements is not affected.

• Select Elements highlights elements within the clearance distance.

PLM00109 11.6 Getting Started with Product Visualization 3-49

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Work with the element pair list in the General Clearance Results window.
• Results Window displays the General Clearance Results window.

• Filter changes the rows of information that appear in the General

Clearance Results window in accordance with filters you created.

• Find finds text strings in the results that are visible in the General
Clearance Results window.

• Clear All clears the list that appears in the General Clearance
Results window.

• Remove Annotations removes from the Viewing window the label

that identifies the element pair that is selected in the General
Clearance Results window.

• Save All saves the list that appears in the General Clearance Results
window, as well as any items that have been filtered, as a .txt file.

• Save Visible saves the list that appears in the General Clearance
Results window as a .txt file.

• Load opens a clearance results list that has been saved in a previous
Results work session or a Clearance Database Connection (.dbc) file.

• Quick-load automatically opens the last clearance results file or

Clearance Database Connection (.dbc) file that was opened or saved.

• Compare List to File compares the information in the General

Clearance Results window to clearance results that have been saved
in a file.

• Email All Owners sends an e-mail message to the owners of all

issues listed in the General Clearance Results window.

• Recalculate Zones uses the zone file specified in the Clearance

Zone Preferences dialog box to recalculate the zones in your model
and identify which clearance issues occur in which zones.

• Post All Issues posts all the issues listed in the General Clearance
Results window to the visual issues list on your Community
Collaboration site.

• Remove All Issues removes all the issues listed in the General
Clearance Results window from the visual issues list on your
Community Collaboration site.

3-50 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

• Preferences specifies your preferences for the General Clearance

Results window.

• Report saves the results list in the General Clearance Results

window as a standard or custom report.
Navigate to the Previous Result or Next Result in the General Clearance
Results window, or to the Previous Region or Next Region of contact or
penetration in the Clearance Navigation & Analysis dialog box.

Nota
Navigation Generate a results list containing multiple results for all elements
within a clearance distance or elements within a clearance
distance of a selected part to navigate between results. The
Clearance Navigation & Analysis dialog box must be open
and contain multiple regions of contact or penetration to
navigate between regions.

Change settings that control appearance, precision, and behavior when

you check clearance.
• Calculator Settings specifies the precision and nature of the
clearance check.

• Display Precision changes the number of decimal places to which

clearance distances are calculated.

• Show Estimated Time toggles display of time estimate during the

clearance check.

• Email specifies when and to whom e-mail messages are automatically

sent when clearance is checked.
Preferences
• Owner specifies the attribute that identifies the owner of a part.

• Part Creation Date specifies the attribute that identifies the creation
date of a part, as well as the format of the date.

• Web specifies how issues are posted to the Web site.

• Zones specifies the list of zones that have been defined by your
company for the model.

• Attributes defines the attributes included in the General Clearance

Results list.

PLM00109 11.6 Getting Started with Product Visualization 3-51

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

• Requirement Components specifies whether to use a Universal

Clearance Requirement or other requirements and conditions present
in the Oracle database.

• Result Components specifies whether to visually display results

within the application or upload the results to the Oracle database.

Comparison menu

You can use the Comparison menu to display differences between two part sets or Viewing windows.
The Comparison menu is on the Menu bar when a 3D model file is in the active Viewing window
and you choose Tools→Comparison.

Use this option To do this

Display differences between two parts or two sets of parts.
• Set Part Group 1: Set your first set of parts for comparison.

• Show Part Group 1: Show the parts in Part Group 1.

• Set Part Group 2: Set your second set of parts for comparison.

Geometry • Show Part Group 2: Show the parts in Part Group 2.

• Tricolor Mapping: Display Part Group 1 and Part Group 2 in the

same Part Compare Viewing window and identify the similarities and
differences between the part sets.

• Distance Mapping: Display Part Group 1 and Part Group 2 in the

same Part Compare Viewing window and identify the extent of the
differences between the part sets.
Visually inspect models side by side in two or more 3D Viewing windows.
• View Multiple Windows: Start a side by side comparison of the
contents of multiple 3D Viewing windows.
Side by Side
• Synchronized Viewing: Synchronize the navigation cameras for the
Viewing windows involved in the comparison.

• Reposition Windows: Re-tile the Viewing windows.

Preferences Specify the default behavior of 3D comparisons.

Concept menu

Use the Concept menu to work with advanced appearance attributes.

3-52 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Appearance Specify appearance options.
Behaviors Create and manage Behaviors.
Presenter Play presentations.
Desktop Display Set the desktop display mode.
Immersive Display Specify immersive display options.
Sensors Configure sensors.
Surface Analysis Evaluate part surface fairness.

Constraint menu

Use the Constraint menu to constrain parts in an assembly and manage constraint files. The
Constraint menu appears on the Menu bar when you choose Constraint from the Tools menu.

Use this option To do this

Open Constraint File Open an existing constraint (.plmxml) file.
New Constraint File Create a new constraint file.
Save the constraints to a constraint file. If you opened an existing
Save Constraint File
constraint file, save the changes to the same file.
Save As Constraint Save the constraints to a constraint file. You can specify a new file name
File and path.
Update Update
Create Constraint Create new constraints.
Preferences Set global constraint behavior and appearance preferences.

DFx menu

The DFx menu is accessible from the Tools menu when an ECAD image is opened in the Viewing
window.

Use this option To do this

Open the Open Rules dialog box and select a configuration file containing
Open Rules
the rules for evaluating the open PCB.
Open the DFx Rule Set Editor dialog box to review and modify Design for
Edit Rules
Assembly and Design for Test rules.
Open Results Open a previously generated results file for the current PCB.
Save Save the active rules file and results using the current dataset name.

Save the active rules file and results. You will be prompted for a new
Save As
dataset name.

Run Start the design evaluation on the active PCB.

Summary Report Open the most recently saved summary results report for the active PCB.
Detail Report Open the most recently saved detail results report for the active PCB.

PLM00109 11.6 Getting Started with Product Visualization 3-53

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Edit menu

The Edit menu appears in the Menu bar when a file is open. Edit menu items are available when
markups are selected.

Use this option To do this

Copy (2D, 3D) Copy a selected markup.
Copy Image (2D, Copy an image as it appears in the Viewing window, then paste the image
Windows only) into another application that accepts bitmap images.
Copy Region (2D, Select a section of an image and copy it to the clipboard.
Windows only)
Cut (2D, 3D) Cut a selected markup.
Delete (2D, 3D) Delete a markup.
Options Modify Teamcenter options.
Paste (2D, 3D) Paste a cut or copied markup into the selected markup layer.
Redo (2D, 3D) Reverse an undo.
Select All (2D) Select all the markups on your image.
Undo Reverse the last action you performed.
User Settings Update your Teamcenter user settings.

File menu

The File menu is on the menu bar.

Some options are available only when files of a particular type are open.

Use this option To do this

Close Close the active file. If you have used the New Window option to create
additional views of your document, all views close. To close only one
view, close the window itself.
Convert Model Convert a 3D model file to .jt format.
Exit Close all files and exit the program.
Export (3D) Export 3D model files.
Export Image Save a 2D image of your current view, as a raster image.
Export Image View Save 2D current view information as a file or macro.
List (2D)
Preferences Choose File Locate Preferences to specify the manner in which directories
are searched for files that are referenced in your files.
Change the 2D File Loader Preferences.
Print Print the image in the current Viewing window.
Print Preview View and manipulate your 2D image or 3D model, then print the view in
the Print Preview window.

3-54 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Properties (2D) Display information about your 2D image.
You can display the name and location of your file, as well as the
dimensions, depth, and resolution of your image. You can also view any
metadata that has been stored with your image file.
Save All Layers (2D) Save your layers as separate CGM markup layers. If a layer has not been
saved, you will be prompted for a file name.
Save As (3D) Save 3D model files as .plmxml.
Save Combined Save all selected layers as one CGM file.
Layers (2D)
Dica
• You can select layers by clicking the layer name in the layer
tree.

• You can select multiple layers by pressing the CTRL key

while you click.

Nota
If the environment variable EAI_EXPORT_COMBINED_VI-
SIBLE is set to YES, all visible layers are combined in this
operation, whether or not they are selected.

Save Layer Save the selected 3D layer.

Save Layer As Save the selected 3D layer with a new name.
Save Selected Layers Save the selected layers as separate CGM markup layer.
As (2D)
Save Session Save a session file.
Send Mail (2D, 3D) Send an e-mail message with a .png image capture of the contents of the
2D or 3D Viewing window or with a .vfz collaboration file that captures
your work session.

2D GD&T Markup menu (Windows only)

You can use the GD&T Markup menu to control how GD&T markups appear in the Viewing window.
The GD&T Markup menu appears on the Menu bar when you choose GD&T Markup from the
Tools menu.

Use this option To do this

GD&T Annotation
Open the GD&T Annotation Editor dialog box.
Editor
Stack Enable or disable Stack Mode.
Copy GD&T
Copy a GD&T annotation.
Annotation

PLM00109 11.6 Getting Started with Product Visualization 3-55

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Paste GD&T
Paste a GD&T annotation.
Annotation
New Layer Add a new GD&T markup layer.
Preferences Specify GD&T annotation preferences.

3D GD&T Markup menu (Windows only)

You can use the GD&T Markup menu to control how GD&T markups appear in the Viewing window.
The GD&T Markup menu appears on the Menu bar when you choose GD&T Markup from the
Tools menu.
Use this option To do this
GD&T Annotation
Open the GD&T Annotation Editor dialog box.
Editor
Anchor Enable or disable Anchor Mode.
Stack Enable or disable Stack Mode.
Copy GD&T
Copy a GD&T annotation.
Annotation
Paste GD&T
Paste a GD&T annotation.
Annotation
New Layer Add a new GD&T markup layer.
Preferences Specify GD&T annotation preferences.

Groups menu
Use the Groups menu to create sets of visible parts (groups), and display, hide, or select each group.
The Groups menu appears on the first level of the Menu bar when you choose Tools→Groups to
activate the Groups menu.
Use this option To do this
Add Selected Create a new group from the parts that are selected in the Viewing window.
Add Visible Create a new group from the parts that are currently visible.
Copy to Alt. Hierarchy Create an assembly of the active group in the Assembly tree.
Delete Delete the selected group from the Groups view.
Edit Group
Change the appearance of the parts in the selected group.
Appearance
Full Subtract Change the way group parts are hidden.
Rename Rename the selected group from the Groups view.
Replace the parts in the selected group with the parts that are selected in
Replace Selected
the Viewing window.
Replace the parts in the selected group with the parts that are currently
Replace Visible
visible in the Viewing window.
Single Group Mode Display, hide, or select the parts in only one group at a time.
Use Group Display the parts in groups with the appearance you set with the Edit
Appearance Group Appearance option.

3-56 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Help menu

Use the Help menu to access the information you need to use the software.

Use this option To do this

Current Application Launch the online help for the active application.
Help Library Launch the full help library.
About Display version, copyright, and requirement information about the software.

Markup menu (2D)

The 2D Markup menu appears on the Menu bar when a 2D image file is in the active Viewing window
and you choose Markup from the Tools menu.

Use this option To do this

New Layer Create a new 2D markup layer on your 2D image.
Select individual markups to move them around the Viewing window and
Select
between 2D markup layers.
Select a type of markup to place on your 2D image. You can choose to
Draw create markers, lines, shapes, and text. You can also select the options to
insert another 2D image or predefined data from a rubber stamp.
Move a 2D markup to the top of all other 2D markups on the 2D markup
Bring to Front
layer.
Send to Back Move a 2D markup behind all other 2D markups on the 2D markup layer.
Bring Forward Move a 2D markup one position forward on the 2D markup layer.
Send Back Move a 2D markup one position back on the 2D markup layer.
Properties Change the characteristics existing 2D markups.
Preferences Specify the characteristics of new 2D markups.

Markup menu (3D)

The Markup menu appears on the menu bar when a 3D file is in the active Viewing window, and
you choose Tools→Markup.

Use this option To do this

New Layer Create a new 3D markup layer.
Layer Authoring Create authored layers to use during collaboration sessions.

Select Select an existing markup.

Draw Draw markups in the Viewing window.

PLM00109 11.6 Getting Started with Product Visualization 3-57

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Attach the markups you draw to parts of the model. Clear Anchor to draw
Anchor markups that are not attached to a part, but instead “float” in the Viewing
window.
Draw filled rectangle, polygon, ellipse, or text markups. Clear Fill to draw
Fill
only the outline of a rectangle, polygon, ellipse, or text.
Auto Create Anchored Create anchored text which is added to either selected or visible parts
Text at once.
Use Predefined Text Add predefined text that needs to appear every time you add a text markup.
Align Align multiple anchored text markups for readability.
Distribute Distribute markups as needed to evenly space them.
Position Anchored
Position anchored text markups precisely where you want them.
Text
Resequence Callouts Resequence the order callouts appear in the Viewing window.
Remove All Remove all 3D markups.
View Anchored with Associate the visibility of anchored markups with the visibility of the parts
Part they are attached to.
Manage Symbols Access the Symbol Manager dialog box.
Preferences Change the colors, styles, and display of 3D markups.

Measurement menu (2D)

The Measurement menu appears on the Menu bar when a 2D image is in the Viewing window
and when you choose Tools→Measurement.

Use this option To do this

New Layer Create a new markup layer.
Calibrate the measurement device between two points drawn on your
Calibrate Vector
base file or markup layer.
Calibrate the measurement device between any two points (pixels) on your
Calibrate Raster
base file or markup layer.
Measure a drawn angle or radius, between two drawn points, or the angle
Vector Measurement
between two drawn lines on your base file or markup layer.
Measure any angle or radius, between any two points, or between any two
Raster Measurement
lines on your base file or markup layer.
Persistent Maintain measurement results by saving the data as a base file or markup
Measurement layer.
Preferences Set precision, color, and text height for 2D measurements.

Measurement menu (3D)

The Measurement menu appears on the Menu bar when you open a 3D file and enable 3D
Measurement from the Tools menu.

3-58 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Select the type of 3D measurement (single, double, chain, fan, distance,
Type
angle, radius, or diameter).
Clear Delete all 3D measurement display labels.
Undo Pick Clear your last measurement pick.
Create Part
Summation Display the total area, volume, and mass of a selected set of parts.
Measurement
Create Bounding Box Display the bounding box for a selected set of parts, and display the
Measurement measurements of the bounding box.
Create Part Set
Display the distance between two sets of parts.
Measurement
Show Minimum Display the minimum distance when performing measurements between
Distance Only part features.
Show Maximum Display the maximum distance when performing measurements between
Distance Only part features.
Measure Surface Measure the centerline curve of a surface or calculate the cumulative
Centerline length of curves of multiple surfaces.
Use Approximate Disable NURBS measurement for some model files.
the units of measurement, precision, lines, edges, fill, and font displayed
in the measurement display labels. You can also choose to display
Preferences arc and circles with radius or diameter measurements, to measure the
minimum or maximum distance between parts, and to display XYZ delta
measurements.
Reports Create and edit measurement reports.
Display Active Display information about the active double measurement in the upper
Measurement left corner of the Viewing window.
Record initial information for all double measurements and log any
Measurement
subsequent changes to double associative measurements as you play a
Logging
motion file or interactively move parts.

Navigation menu (3D)

The Navigation menu is on the Menu bar when a 3D file is open.

Some options are available only when you are working in a particular mode.

Use this option To do this

Examine your model by panning, zooming, and rotating the navigation
Examine Mode
camera.
Explore forward or back and look left or right as you move through your
Explore Mode
model.
Fly Mode Move forward, back, left, right, up, and down through your model.
Previous View Return to the last static view.
Next View Move to the next static view.
Fit All Fit all the visible parts of your 3D model into the Viewing window.

PLM00109 11.6 Getting Started with Product Visualization 3-59

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Zoom Area Zoom to a specific portion of your 3D model.
• Center a point of your 3D model in the Viewing window.
Seek
• View the normal of any face on your 3D model.
Continuously rotate the navigation camera around the model, creating
Automatic Motion
a spinning turntable effect.
Rotate Rotate around a specific point on your 3D model.
Navigate Move closer to or farther from the model.
Pan Move the view of your 3D model in the plane of the Viewing window.
Position Choose your initial position in your model.
Level Return your view of the model to level.
Follow Terrain Remain a specified distance above the "floor" upon which you are moving.
Stop on Collision Stop moving through your model when you come into contact with a part.
Return to the location and position you were at when you last selected
Go Home
Set Home.
Set Home Set the current location and position as the home location.
Preferences Set parameters for moving through your model.

Part Edit menu

The Part Edit menu is on the Menu bar when you choose Part Edit from the Tools menu.

Use this option To do this

Control model LODs, and define a working set of parts for use in geometry
Control
simplification.
B-Rep Reverse B-Rep face orientation.
Tessellation Tessellate parts.
Visibility Simplify parts based upon visibility.
Decimation Simplify parts based upon a specified triangle reduction.
Preferences Specify Part Edit Preferences.

PMI menu

The PMI menu is on the menu bar when a 3D model file is in the active Viewing window and you
choose PMI from the Tools menu.
Use the PMI menu to display product and manufacturing information (PMI) that is attached to your
model.

3-60 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

(For JT models containing feature level designs) PMI for all faces and
edges associated with the feature level.

Feature-based Nota
Multiple Entity Mode
If you use this option and the JT model does not contain a
feature level, PMI is displayed from the selected face and all
its edges.

Toggle Multiple Entity

Display all the PMI that pass the filter.
Mode
(For Single Entity Mode) Display the previous PMI, when you are cycling
Previous Entity
through a series.
Toggle Single Entity
Display each PMI one at a time.
Mode
(For Single Entity Mode) Display the next PMI, when you are cycling
Next Entity
through a series.
Filter Configuration Choose which types of PMI are displayed.
Text Orientation Change the orientation of PMI text so it is displayed correctly.
Display all PMI in the PMI list, without changing the direction or orientation
Fit View to Selected
of the camera.
Clear Entities Clear all the PMI that are currently displayed.
Display a text dialog box that lists points and normals for selected
Point Report
Measurement Point and Spot Weld PMI entities.
Preferences Set PMI preferences to control the appearance of PMI labels.

Reconcile menu

Use the Reconcile menu to resolve broken references to parts and assemblies. The Reconcile
menu appears in the Menu bar when you choose Reconcile from the Tools menu.

Use this option To do this

Validate All
Validate references in a file.
References
Reconcile Broken Open the Reconcile Reference dialog box so you can manually reconcile
References broken references.

PLM00109 11.6 Getting Started with Product Visualization 3-61

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Removes all mapping rules from the session.

Nota
Mapping rules record of how the broken references were
resolved, and they are retained in session files. Resolving
broken references for the externally stored Visualization files
Delete All Mapping such as VFM, Constraints, and VAN files require mapping rules.
Rules
You can remove the mapping rules from the session file to
reduce the size of a session file. References that are already
resolved in the session will remain resolved, but removing the
rules affects working with the externally stored Visualization files
such as motion (.vfm), constraint (.plmxml), and animation (.van)
files. For that reason, this command should be used sparingly.

Import Mapping File Load a mapping file.

Export Mapping File Save a mapping file.
Preferences Specify reconcile preferences.

Section3D menu

The Section3D menu appears on the Menu bar when a 3D model is in the active Viewing window
and you choose Section3D from the Tools menu.

Use this option To do this

Create Section Create a cross section that is normal to the X, Y, or Z axis.
Create Grid Create a cross section grid.
Create a series of equally spaced cross sections along an axis, along a
Create Series
linear edge, or between two points.
Delete Delete the active cross section in the current 3D view.
Delete All Delete all cross sections.
Align the active cross section plane in the current view normal to the X, Y,
Align Plane
or Z axis, or to a feature of the model.
Show in Viewer Show or hide the Cross Section Viewer for the active section.
Select Parts Select all parts in an existing cross section.
Update Parts Update a cross section after adding or removing parts.
Send to 2D Capture a cross section as a 2D image.
Send to 3D Capture a cross section as a 3D document.
Clip away the near or far side of the model, or clip away both sides to
Clipping
display only the cross section edges.
Plane View Rotate the view to make it parallel to the active cross section plane.
Fix Label Orientation Correct the orientation of cross section grid labels.
Show Borders Display all cross section borders.
Hide Borders Hide all cross section borders.

3-62 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Generate point sheets and display the points in the 3D scene.
Choose Section for points that are generated at the intersection of section
Create Point Sheets and grid lines parallel to the X, Y, or Z axes.
Choose Curve for points that are generated along a single curve or
multiple connected curves.
Preferences Specify appearance and behavior preferences for new cross sections.
Show or hide the Position Plane dialog box or 3D manipulator for
Position Plane
positioning section planes.
Update cross section rendering when the Fast Mode section preference
Manual Update
is active.
Create cross section reports that can include analysis of the section area
or perimeter, moment of inertia, center of gravity, and other calculated
cross section properties.

Report
Nota
Only Perimeter and Area are available if the model does not
contain B-Rep data.

Snapshots menu

The Snapshots menu is on the Menu bar when you choose Snapshots from the Tools menu.

Nota
Menu options vary depending on the type of file you are working with. For example, when
you work with 3D snapshots you can cycle through the snapshots, change the view
between thumbnail images and a list, and set 3D snapshot preferences.

Use this option To do this

Cycle through a series of snapshots.

Cycle Nota
This feature is supported by 3D snapshots.

Add Add a snapshot of the Viewing window.

Insert Insert a snapshot between two existing snapshots.
Delete Delete the selected snapshot.
Replace Replace a snapshot with a new snapshot.
Recapture Image Recapture the image displayed in the Snapshots view.

PLM00109 11.6 Getting Started with Product Visualization 3-63

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

Specify snapshot preferences.

Preferences Nota
This feature is supported by 3D snapshots.

Display snapshots as thumbnails or a list.

Toggle View Nota

This feature is supported by 3D snapshots.

Tools menu

Use the Tools menu to enable and use various features of the software.
Some options are available only when files of a particular type are in the active Viewing window.

Use this option To do this

Translate, scale, or rotate your 2D image.
When you select Adjust, the Adjust menu appears on the Menu bar.

Adjust Nota
When you open a 2D image and add a layer, this menu option
becomes available.

Align 3D model parts.

When you choose Alignment, the Alignment menu appears on the Menu
bar.
Alignment
Nota
When you open a 3D model, this menu option becomes
available.

Work with the assembly of your 3D model.

Assembly When you select Assembly, the Assembly menu appears on the Menu
bar.
CAE Viewing View CAE data exported as a .jt file from a supported application.

3-64 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Enable clearance checking of your 3D model.
When you select Clearance, the Clearance menu appears on the Menu
bar.
Clearance
Nota
When you open a 3D model, this menu option becomes
available.

Identify similarities and differences between sets of parts.

When you select Comparison, the Comparison menu appears on the
Menu bar.
Comparison
Nota
When you open a 3D model, this menu option becomes
available.

Create GD&T markups.

GD&T Markup
(Windows only) When you select GD&T Markup the GD&T Markup menu appears on
the Menu bar.
Create sets of visible parts (groups), and display, hide, or select each
Groups group.
When you select Groups, the Groups menu appears on the Menu bar.
Draw markups on your 2D image.
Markup Draw markups on your 3D model.
When you choose Markup, the Markup menu appears on the Menu bar.
Measure your 2D image or 3D model.
Measurement When you select Measurement, the (2D) Measurement menu or (3D)
Measurement menu appears on the Menu bar.
Display product and manufacturing information (PMI) that is attached to
your model.
When you select PMI, the PMI menu appears on the Menu bar.
PMI
Nota
When you open a 3D model, this menu option becomes
available.

PLM00109 11.6 Getting Started with Product Visualization 3-65

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Use this option To do this

View, create, and delete part Level of Details (LODs).
When you choose Part Edit, the Part Edit menu appears on the Menu bar.

Part Edit Nota

When you open a 3D model, this menu option becomes
available.

Resolve broken file references to parts and assemblies.

Reconcile When you select Reconcile, the Reconcile menu appears on the Menu
bar.
Create and work with cross section views of your 3D model.
Section3D When you select Section3D, the Section3D menu appears on the Menu
bar.
Create or work with snapshots to mark your place.
Snapshots When you select Snapshots, the Snapshots menu appears on the Menu
bar.
Create thrustlines that show the order and relationship of parts in
assemblies.
Thrustline
When you choose Thrustline, the Thrustline menu appears on the Menu
bar.
Create Visual Reports and apply them to your 3D models.
Use this feature to create a systematic auto-color distinction between
parts using a specific condition. For example, create a Visual Report
Visual Report that displays parts that are in a working status as red and all other parts
as green.
When you select Visual Report, the Visual Report menu appears on the
Menu bar.

Thrustline menu

The Thrustline menu appears on the Menu bar when you open a 3D file and enable Thrustlines
from the Tools menu.

Use this option To do this

New Layer Create a new layer on the 3D scene.
New Thrustline Create a new thrustline.
Delete Thrustline Delete the currently selected thrustline.
Preferences Edit preferences for thrustlines.

3-66 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

View menu (2D)

Use the View menu to manage or change how you view 2D images in the Viewing window. A
separate menu is available for 3D viewing. Some options are available only when files of a particular
type are open.

Use this option To do this

Fit All Fit your entire 2D image into the Viewing window.
Size the view to the extents of the first layer in a multi-layered 2D
document.

Base View Nota

If the 2D document that you are viewing only has one layer, this
option works the same as Fit All.

Define an area of your 2D image and zoom to fit that area in the Viewing
Zoom Area
window.
Seek Center a point of your 2D image in the viewing window.
Pan Move your 2D image around in the plane of the Viewing window.
Zoom Move closer to or farther from your 2D image.
Zoom a proportional amount closer to or farther from your 2D image in
the Viewing window.

Zoom Scale • Use Zoom In to move closer to your 2D image in the Viewing window.

•
Use Zoom Out to move farther from your 2D image in the Viewing
window.
Zoom - Drawing Scale Zoom to standard drawing scales, for example, 1:4, 1:2, 1:1, 2:1, and 4:1.
Rotate or flip the view of your image.
• Rotate Counterclockwise: Rotate the view 90 degrees
counterclockwise.

Orient • Rotate Clockwise: Rotate the view 90 degrees clockwise.

• Flip Vertical: Flip the view vertically.

• Flip Horizontal: Flip the view horizontally.

Page Move to a different page in a 2D image file that contains multiple pages.
Full Screen Display
Enable full screen display of 2D images.
(Windows and Linux)
Toolbars Display and hide toolbars, toolbar tool tips, and toolbar button borders..
Search (Windows only) Search for text strings in PDF files.

PLM00109 11.6 Getting Started with Product Visualization 3-67

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

View menu (3D)

Use the View menu to manage or change how you view 3D images in the Viewing window. A
separate menu is available for 2D viewing. Some options are available only when files of a particular
type are open.

Use this option To do this

Switch to a standard view.
Standard Views
Asterisks next to the view name indicates that view is the default view.
Use the Rotate control panel or rotate your 3D model specific ways in
Rotate
the viewing window.
Add a near and a far clipping plane to the 3D Viewing window. You can
View Clipping
also adjust the field of view for the perspective display mode.
Display or hide selected parts, vertices, and edges of 3D models.
• Control by Selected: Display or hide parts when you select them.

• All On: Display all parts.

• All Off: Hide all parts.

• Selected On: Display parts that are selected in the assembly tree.
(When Control by Selected is not active.)

• Selected Off: Hide parts that are selected. (When Control by

Selected is not active.)

• Visited On: Display all parts that you have explicitly made visible
during the work session.

Visibility • Invert Visibility: Swap the visibility state of parts that you have
explicitly made visible during the work session.

• Show Edges: Display feature or B-Rep edges for the selected parts.

• Show Vertices: Display B-Rep vertices for the selected parts.

• Hide Edged: Hide feature or B-Rep edges for the selected parts.

• Hide Vertices: Hide B-Rep vertices for the selected parts.

• Hide All: Hide all edges and vertices for all parts.

• Hide Obscuring: Hide parts that obscure your view of other parts.

• Clipping Volumes: Clip areas of a 3D model for a better view of

a part or assembly.

3-68 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To do this

Select parts or part features in your model.
• All: Select all parts.

• None: Deselect all parts.

• Selection Filter: Specify Point, Vertex, Arc Center, Midpoint, Point

on Edge, Surface, or Part. Check marks indicate part feature
types that are active for Smart Pick and QuickPick.

• Disable Active Tool: Cancel the operation that is expecting a part

feature selection, for example, 3D Measurement.
Select
• Define Point: Specify User Defined Point, Midpoint, Intersection,
or Center of Three Point Arc.

• Select Parts by Area: Select parts within an area that you define.

• Select Parts by Volume: Select parts within a volume that you define.

• Pick Through Unshaded Parts: Pick geometry visible through parts

displayed in the tessellated or feature lines display modes.

• Generate Selection Preview Data: Load the B-Rep data required for
previewing part feature selection.
Orthographic Display an orthographic view of your model.
Perspective Display a perspective view of your model.
Page Extents Enable page extents functionality to size 3D entities relative to a 2D space.
Preferences Specify 3D viewing and selection preferences.
Performance Change the 3D Viewing options to improve the viewing quality.
Specify part display mode options.
• Clear display modes: Reset the display modes for all parts.

Part Display Modes • Set all occurrences: Apply display modes to all instances of selected
parts.

• Show confirmation dialog: Confirm that you want to reset the display
modes for all parts.
Open the Toolbars dialog box to:

Toolbars • Display or hide toolbars.

• Set toolbar display options.

PLM00109 11.6 Getting Started with Product Visualization 3-69

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

Visual Report menu

Use the Visual Report menu options to create visual reports and apply them to the parts and
assemblies.

Use this option To do this

Visual Report Activate Visual Report tools.
Open the Apply Report dialog box.
Apply Report
Use the Apply Report dialog box to load and apply existing visual reports.
Open the Quick Report dialog box.
Quick Report Use the Quick Report dialog box to quickly identify the parts that match
your metadata search query.
Open the Single Rule Report dialog box.

Single Rule Report Use the Single Rule Report dialog box to generate metadata search
conditions and to specify how you want matched and unmatched parts
displayed.
Open the Multiple Rules Report dialog box.
Multiple Rules Report Use the Multiple Rules Report dialog box to generate metadata search
conditions.
Open the Results Legend dialog box.
Use the Results Legend dialog box to display detailed information about
Results Legend processed visual reports. This information includes details as the current
rule name and scope, names of parts, and the attributes and values used
in the report.
Open the Report Explore dialog box.
Report Explore Use the Report Explore dialog box to set options for how you view the
results of your visual report.
Reset Appearance Discard visual changes and return to the original visual representation.
Preferences Specify the default options for various visual reports preferences.

Window menu

Use the options from the Window menu to create a new instance of the 2D or 3D Viewing window or
clone the 3D Viewing window.

3-70 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

Use this option To

Open a copy of the active 2D or 3D Viewing window.

Nota

New Window If you have created copies of the file with the New Window
option, and then you choose Close, all windows that contain
the file in the active window close. To close a Viewing window
without closing other Viewing windows that display the same file,
click the X in the upper right corner of the Viewing window.

Create the same 3D view window as with New Window, but also apply
Clone Window (3D)
view-based information from the active 3D view being cloned.

Shortcut menus
Shortcut menus are accessed by right-clicking items in locations, such as the assembly view. They
provide quick access to much of the application's functionality.

Working with the status bar

Status bar overview

Located at the bottom of the interface, the Status bar displays the following.
• The amount of memory that is available for 3D documents.

PLM00109 11.6 Getting Started with Product Visualization 3-71

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

• The anti-aliasing method (hardware or software) along with the current number of samples
being used in the Viewing window.

• The loading progress of the 3D assembly. For example, when loading parts you will see file
names appear in the Status bar, and the number of remaining shapes to load (with a time
estimate for completion).

Choosing colors
When you select an option that involves choosing colors, you can choose from a palette of standard
colors or create custom colors.

Windows

• Do one of the following when the standard color palette appears:

To Do this
Choose a color from the
Click a color.
standard color palette
1. Click Other to open the Color dialog box with a larger palette.

Choose a color from a

larger color palette

2. Click a color in the Basic colors area.

3. Click OK.

3-72 Getting Started with Product Visualization PLM00109 11.6

 Exploring the Interface

To Do this
1. Click Other to open the Color dialog box.

Create a custom color

interactively

2. In the color shader section, drag the mouse pointer until the
color preview displays the correct color (hue and saturation).

3. Drag the luminosity slider up and down until the color preview
displays the correct brightness.

4. (Optional) To save your custom color for use in the current

work session, click Add to Custom Colors.
The color appears in the Custom colors section.

5. Click OK.
1. Click Other to open the Color dialog box.

Create a custom color by

typing color values

2. Type values to define your custom color.

Hue: Enter a value from 0 to 239 to define the hue (color) of
the color.
Sat: Enter a value from 0 (grey) to 240 (intense) to define the
saturation of the color.

PLM00109 11.6 Getting Started with Product Visualization 3-73

 Capítulo
Capítulo 3: 3:Exploring
Exploring the Interface
the Interface

To Do this

Lum: Enter a value from 0 (black) to 240 (white) to define the

luminosity (brightness) of the color.
Red: Enter a value from 0 to 255 to define the amount of red
in the color.
Green: Enter a value from 0 to 255 to define the amount of
green in the color.
Blue: Enter a value from 0 to 255 to define the amount of
blue in the color.

3. (Optional) To save your custom color for future use, click Add
to Custom Colors.
The color in the Color window appears in the Custom colors
list on the left side of the Color dialog box.

4. Click OK.

3-74 Getting Started with Product Visualization PLM00109 11.6

Capítulo 4: Previewing images and .jt parts

Image Preview and JT Preview views

Use the Image Preview and the JT Preview views to examine 2D raster images and .jt parts
associated with items, item revisions, and datasets. When you select compatible objects within the
My Teamcenter tree or the trees of other perspectives, the associated image or .jt part is displayed in
the appropriate preview viewer.

Nota
Images and parts are displayed according to the order specified in the tcgrb.properties
file (for 2D images) and the tctdv.properties file (for .jt parts).

Preview images
Preview 2D raster images in the Image Preview view.
1. (If you do not have a tab for the Image Preview view) Choose Window→Show
View→Other→Teamcenter→Image Preview.

2. Select an item, item revision, dataset, or other object associated with a 2D image.
The image is displayed in the Image Preview view.

PLM00109 11.6 Getting Started with Product Visualization 4-1

 Capítulo
Capítulo 4: 4:Previewing
Previewing images
images and
and .jt .jt parts
parts

Nota
• The Image Preview view supports raster images only, such as bitmap (.bmp),
JPEG (.jpg, jpeg), and TIFF (.tif, .tiff) files. Vector formats are not supported.

• The Image Preview view is displayed by default in the Relation Browser

application.

Dica
The Image Preview view provides a basic preview of 2D raster images. To view vector
images or work with additional 2D visualization functionality, right-click the object
and choose Send To→Lifecycle Viewer.

Preview .jt parts

1. (If you do not have a tab for the JT Preview view) Choose Window→Show
View→Other→Teamcenter→JT Preview.

2. Select an item, item revision, dataset, or other object associated with a .jt file.

3. Do any of the following to examine your part:

To Do this
Rotate the camera around the part In the background of the view, drag the cursor.
Press Ctrl and then in the background of the
Pan the camera along the current plane
view drag the cursor.
Press Shift and then in the background of the
Zoom the camera
view drag the cursor.

Nota
• The JT Preview view can display only one .jt dataset at a time.

• The JT Preview view is displayed by default in the My Teamcenter application.

Dica
• If a dataset is revised while active in the JT Preview view, right-click the dataset
and choose Refresh to see the latest changes.

• The JT Preview view provides a basic preview of .jt parts. To work with additional
3D visualization functionality, right-click the object and choose Send To→Lifecycle
Viewer.

4-2 Getting Started with Product Visualization PLM00109 11.6

Capítulo 5: Opening files

Primary and secondary visualization documents

Visualization files in Teamcenter are always either primary or secondary documents. You can open
primary documents independently from other documents, while secondary documents are dependent
upon primary documents. For example, a JT file is a primary document, which you can view on its
own without any other file having to be open; a markup layer (VPL file), in contrast, cannot be viewed
on its own, and must be opened in the context of a primary document, such as a JT file.

A primary document:

• Can exist in the database on its own.

• Consists of data that has been translated from some master source data such as a CAD file.

• Consists of one file (for example, a 2D image) or a logical set of files (for example, assembly
and part files).

• Can be opened in a Lifecycle Visualization viewer independently of any other documents.

• May have secondary types of documents that depend on it, but may not be aware of these
secondary files.

A secondary document:

• Always relies on a primary document.

• Is only meaningful in the context of a primary document (for example, a 3D markup).

• Cannot be viewed in a Lifecycle Visualization viewer without a primary document.

• Is always aware of its primary document.

• May contain many types of data which may serve different purposes (for example, a snapshot
consists of layer data, view data, motion data, thumbnail data, and so forth).

• May capture additional information about the primary document.

Open visualization data from Teamcenter

You can open visualization data, including 2D images and 3D models, in the stand-alone viewer and
the Lifecycle Viewer.

PLM00109 11.6 Getting Started with Product Visualization 5-1

 Capítulo
Capítulo 5: 5:Opening
Opening
files files

Nota
The options to send Teamcenter managed visualization data to the stand-alone viewer may
not be shown by default on the user interface of the rich client or the thin client. For these
options to be displayed, you must enable them using the Lifecycle Visualization options in
the rich client or the TC_show_open_in_vmu_button preference.

• Do any of the following:

To Do this
Send any of the following to the stand-alone
viewer: o (Rich client) Select the object and do one
o An item or item revision that includes of the following:
visualization data ■ On the My Teamcenter toolbar, click
Start/Open In Lifecycle Visualization
o A BOM view
.
o Selected product structure
■ Choose File→Open in Lifecycle
o 4GD worksets Visualization.

o A 3D dataset such as a JT file o (Thin client) Select the check box for
the object you want to open and choose
o A 2D or ECAD dataset such as an image View→Teamcenter Visualization.
or PCB file
Send any of the following to the Lifecycle
Viewer:
o An item or item revision that includes
visualization data o (Rich client only) Right-click the object and
click Send To→Lifecycle Viewer.
o A BOM view
Nota
o Selected product structure
You can open data in the
o 4GD worksets Lifecycle Viewer only from the
rich client.
o A 3D dataset such as a JT file

o A 2D or ECAD dataset such as an image

or PCB file

If you are using the rich client, the file opens in the viewer. If you are using the thin client, a VVI
file is launched. The VVI file contains the information necessary for the stand-alone viewer to
open the file. Click Open to open the visualization file in the viewer.

5-2 Getting Started with Product Visualization PLM00109 11.6

 Opening files

Working with product structure from Teamcenter

You can send a full or partial product structure from the Structure Manager to the Lifecycle Viewer
or a stand-alone viewer. Open the structure in a new Viewing window, insert the structure as a
new assembly in an active Viewing window, or merge the structure with an existing assembly in
an active Viewing window.
To send product structure to the visualization client, select the product structure within the Structure
Manager and then do one of the following:

• Click Start/Open In Lifecycle Visualization to send the product structure to a stand-alone

viewer.

• Right-click the product structure and choose Send To→Lifecycle Viewer to send the product
structure to the Lifecycle Viewer.

To send a full product structure to the visualization client, select the root or top line of the product
structure. To send a partial product structure, select any child nodes within the root product structure
hierarchy. Partial product structure consists of the lines representing the unique paths down to
the selected structure.

Nota
When working with partial product structures, the following limitations apply:
• You can expand only the child hierarchy of the launched lines.

• All viewer operations, such as filters and clearance analysis, are applicable only for
the launched lines.

Nota
Teamcenter applications such as Structure Manager include view toggles that enable you
to see BOM lines that are configured out because of effectivity or variants. The view toggle
Show Suppressed Occurrences enables you to see BOM lines that are suppressed
in the current assembly arrangement. If you send an assembly to the stand-alone
application viewer or the Lifecycle Viewer when this view toggle is on, the suppressed
structure elements are grayed out. If you open a product view that captured suppressed
occurrences, an inactive structure warning is displayed. To avoid this problem, set the
Product View Creation Preferences to prevent the creation of product views when the
Show Suppressed Occurrences view toggle is enabled.

Inserting and merging files

When you want to insert or merge a 2D, 3D, or ECAD file into an opened similar file format, the
system asks how you want to open the file. The following insert and merge options exist:
• Insert the file into the current window.

PLM00109 11.6 Getting Started with Product Visualization 5-3

 Capítulo
Capítulo 5: 5:Opening
Opening
files files

• Merge the file into the current window.

• Insert or merge the file into a new Viewing window.

The steps required to insert or merge files vary slightly depending upon the applications involved.
When working with local data in the stand-alone viewer, you must use the Application toolbar
Menu→File→Insert or File→Merge commands. When working with Teamcenter managed data, you
send the data you want to insert or merge into the stand-alone viewer or the Lifecycle Viewer, and
then specify how you want to open the data in the Load Option Preferences dialog box.

Specify load option preferences

1. Choose File→Preferences→Load Options.

2. In the Load Option Preferences dialog box, choose from the following preferences:
• On the 3D tab:

In this
Select this To
section
Do one of the following:
o Open the document in a new window.
Open document
o (If the document is already open in a
window) display the window.
Insert document into active Insert the data into the currently active
window window.
Merge the data into the currently active
window.

Nota
You can merge product structure
Product
only if the data being sent is
Structure
compatible with the contents of
the active Viewing window. For
Merge document into active structure to merge, the data being
window sent to the visualization client and
the data in the active Viewing
window must share the following
structure configuration properties:
o Revision rule

o Root or top line

o Variant rule (if either set of

data uses a variant rule)

5-4 Getting Started with Product Visualization PLM00109 11.6

 Opening files

In this
Select this To
section

o Active assembly arrangement

(if either set of data uses
arrangements)

Ask at load time Select your options each time you open a file.
Open with markups Open markups associated with the data.

Markups
Ask at load time Select your options each time you open a file.

• On the 2D tab:

Select this To
Do one of the following:
o Open the document in a new window.
Open document
o (If the document is already open in a
window) display the window.
Insert the data into the currently active
Insert document into active window
window.
Ask at load time Select your options each time you open a file.
Open with markups Open markups associated with the data.
Ask at load time Select your options each time you open a file.

• On the ECAD tab:

Select this To
Do one of the following:
o Open the document in a new window.
Open document
o (If the document is already open in a
window) display the window.
Insert the data into the currently active
Insert documents into active window
window.
Ask at load time Select your options each time you open a file.

PLM00109 11.6 Getting Started with Product Visualization 5-5

 Capítulo
Capítulo 5: 5:Opening
Opening
files files

Nota
• Selections are persisted each time the dialog box opens.

• The default settings for the Load Option Preferences dialog box are Ask at load
time and Merge document into active window.

• For 3D, for If merge is not possible the default is Open document.

• If you choose Ask at load time, you can use the load option preference to change
how you want to open files.

Open visualization data in My Teamcenter

1. In My Teamcenter, select an item, item revision, dataset, or other object associated with a 2D
or 3D file.

2. Select the Viewer view.

The visualization components load and the My Teamcenter embedded viewer opens.

Dica
Right-click the embedded viewer toolbar area to turn on additional visualization
toolbars.

Open visualization data in Structure Manager

1. In My Teamcenter, right-click an item, item revision, dataset, or other visualization-related object
that contains product structure and choose Send To→Structure Manager.
The Structure Manager opens and displays the product structure.

2. Choose View→Show/Hide Data Panel.

3. In the Data Panel, click the Viewer tab.

The visualization components load and the Structure Manager embedded viewer opens.

4. In the BOM Line, select the check box for the part or assembly you want to view.

Dica
Right-click the embedded viewer toolbar area to turn on additional visualization
toolbars.

5-6 Getting Started with Product Visualization PLM00109 11.6

 Opening files

View related documents in My Teamcenter

When viewing a 3D model, you can open the associated item revision in My Teamcenter to access
additional information or attachments.

1. Display the product structure or part.

2. In the Assembly view, right-click the product structure or parts and choose Send to My
Teamcenter.
-or-
In the Viewing window, right-click the geometry and choose Send to My Teamcenter.
The associated item revision is opened in My Teamcenter.

Specify open preferences for 2D or 3D files

Some CAD related file types can contain 2D or 3D data. You can set preferences to always open
DWG/DFX, IGES, and PRT files in a 2D Viewing window or a 3D Viewing window. Another option is
to be prompted to choose each time you open a file.

1. Choose File→Preferences→File Open.

2. In the File Open Preferences dialog box, choose one of the following for each file type:

• 2D

• 3D

• Prompt

Nota
• This functionality is supported in Standard service levels and above. For Base service
levels, these files always open as 2D file types.

• 3D IGES files are supported only in the stand-alone viewers.

Specify the PLM XML and Parasolid measurement unit

By default, the unit of measurement for PLM XML and Parasolid files is meters. You can use the
PLMXML Units setting to specify another unit of measurement.

1. Choose File→Preferences→PLM XML.

2. In the PLMXML Preferences dialog box, on the Load page, select a unit of measurement for
PLMXML Units.

PLM00109 11.6 Getting Started with Product Visualization 5-7

 Capítulo
Capítulo 5: 5:Opening
Opening
files files

Nota
• The PLM XML Units setting is saved in session files. If you change and save the model
units setting with a VF file, the specified model units of the session file override the
current PLMXML Units setting.

• Session files referencing PLM XML models that were created prior to Teamcenter
lifecycle visualization 5.1.0.2, do not contain the model units specification. The
software uses the current PLMXML Units setting on the Load page of the PLM XML
Preferences dialog box if you load the session file with a newer viewer. This event
may result in content displayed in the wrong scale. The model units is always meters
for pre-5.1.0.2 PLM XML files.
As a work around, migrate the session file to a Teamcenter lifecycle visualization
5.1.0.2 version. Load and save the file in Teamcenter lifecycle visualization 5.1.0.2.

Opening session files in Multi-Site environments

When working in a Multi-Site Collaboration environment, Teamcenter lifecycle visualization session
files referencing dynamic 3D documents may not update correctly. This issue can appear under the
following conditions:
• The session file is created on the master site.

• The session file references dynamic 3D documents.

• The session file and all referenced data are replicated on another site in the network.

• The session file is loaded into Teamcenter Visualization from the replica site.

To prevent session update failures in Teamcenter Visualization, update the File Locate preferences
as follows:
1. Choose File→Preferences→File Locate.

2. In the AutoFile Search Preferences dialog box, click the Document Search Order tab.

3. In the search order list, select Relative File Directory Set.

4. Click Move Up to position Relative File Directory Set above Original File Directory Set
in the list.

5. Click Auto Confirm.

5-8 Getting Started with Product Visualization PLM00109 11.6

 Opening files

6. Click OK.

PLM00109 11.6 Getting Started with Product Visualization 5-9

Capítulo 6: Locating referenced data automatically

Overview of locating referenced data automatically

Some file types support references to external files. If the referenced files are moved, the AutoFile
Search tools attempts to locate the files automatically, in local directories as well as on remote servers.
You can specify AutoFile Search preferences for locating files referenced by high-level containers
such as session files or Technical Portfolios. You also can specify preferences for locating the 3D
sub-part files of assemblies. The AutoFile Search Preferences dialog box has four tabs:
• General

• Document Search Order

• Part Search Order

• Search Log

Specify general loading preferences

You can choose to display a file confirmation dialog box when attempting to load documents or parts.
1. Choose File→Preferences→File Locate.

2. On the General tab of the AutoFile Search Preferences dialog box, choose from the following:

To Do this
Choose Always ask.

Always display the File

Nota
Usage Confirmation
dialog box For Directory Sets on the Document Search Order tab,
Always ask is superseded if Auto Confirm is turned on.

Display the File Usage

Confirmation dialog box
Choose Ask only when multiple matches are found.
only when more than one
potential file is found
Never display the File
Usage Confirmation Choose Never ask.
dialog box
Do not load files that are
Select the Ignore remote servers check box.
located on remote servers

PLM00109 11.6 Getting Started with Product Visualization 6-1

 Capítulo
Capítulo 6: 6:Locating
Locating referenced
referenced data data automatically
automatically

Confirm documents located automatically

Use the File Usage Confirmation dialog box to accept and load files identified by AutoFile Search.
The File Usage Confirmation dialog box is displayed based upon the general loading preferences
and the results of a file search operation.

Nota
• The File Usage Confirmation dialog box is displayed only for primary documents
such as top level assembly files that link to separate JT files, not to the shattered
JT files themselves.

• For Directory Sets on the Document Search Order tab, if Auto Confirm is turned on,
the File Usage Confirmation dialog box is never displayed.

1. Specify general loading preferences to display the File Usage Confirmation dialog box when
locating files.
When you open a document that contains references to an external file that cannot be found,
the program searches for the file according to preferences specified on the Document Search
Order tab.

2. In the File Usage Confirmation dialog box, do any of the following:

To Do this
Click Show Details.
Display the search report
Detailed search information is displayed.
Confirm located files Click Use Selected Location.
Manually locate files Click Browse, and locate the file that you want to load.
Do one of the following:
Cancel the file search • (To cancel for multiple files) Click Cancel All.
operation
• (To cancel for a single file) Click Cancel.

Understanding Directory Sets

Directory Sets are collections of rules that produce locations where files may be located. You
can change the order in which Directory Sets are searched, turn them on or off, and specify to
automatically load files that are located within them.
Use Directory Sets to help locate documents and parts. Access Directory Sets from the Document
Search Order and Part Search Order tabs of the AutoFile Search Preferences dialog box.

6-2 Getting Started with Product Visualization PLM00109 11.6

 Locating referenced data automatically

Directory Sets for documents

Use this option To do this

Search locations where files have been found and loaded via the
Automatic Directory Set File Usage Confirmation dialog box. If the list becomes too long,
older locations are removed.
Current Location Directory On Windows, search the location of the last session file opened; on
Set Mac and Linux, search the location of the application executable.
Search the location of the example files installed during the product
Examples Directory Set installation. This Directory Set assists you in resolving references to
example files from other example files.
Original Location Directory
Search the original location of the file.
Set
Search locations identified dynamically based on rules associated
Palette Launch Rules
with palette entries and the last opened session file. Its primary use
Directory Set
is to help resolve JT file references from palette entries.
Search the locations of recently found files. This Directory Set,
which is dynamically built and reset each time the application starts,
Recent Hits Directory Set
appears on the Search Log tab and ensures that recently resolved
searches are included in the current search.
Search the location of the target file relative to the base file (for
Relative File Directory Set
example, a JT file referenced by a session file).
Search a location specified by your organization. This Directory Set
is available only if your System Administrator defines the location and
provides access to its preferences file. If the preferences file is not
Root Directory Set
found, the Directory Set is not displayed. For more information on
defining root directory sets, see the Teamcenter lifecycle visualization
Installation guide.
Search locations where specialized files used by specific applications
Special Files Directory Set
are installed (for example, files used by Variation Analysis).
User-Defined Directory Set Search locations specified on the User-Defined tab.

Directory Sets for parts

Use this option To do this

Search locations dynamically identified according to references in JT
Relative to Parent Location or PLM XML files. Searches are based upon the current location
and Original Location of the parent file, and the original location of the parent file. This
Directory Set cannot be disabled or edited.
User-defined Directory Set Search locations specified on the Part Search Order tab.

Specify the document search order

Use the Document Search Order tab of the AutoFile Search Preferences dialog box to specify
preferences for locating files referenced by high-level containers such as session files or Technical
Portfolios.

PLM00109 11.6 Getting Started with Product Visualization 6-3

 Capítulo
Capítulo 6: 6:Locating
Locating referenced
referenced data data automatically
automatically

Exemplo
If you save a session file that references a 3D model, and then move the model to another
location, the Document Search Order tab can help you find and access the model.

1. Choose File→Preferences→File Locate.

2. On the Document Search Order tab of the AutoFile Search Preferences dialog box, do any
of the following:

To Do this
Change the Directory Set
Select a Directory Set, and click Move Up or Move Down.
search order
Enable or disable a
Select the Directory Set, and click Enable / Disable.
Directory Set
Select a Directory Set, and click Auto Confirm.
Specify to load files
automatically from a Nota
Directory Set if a match is
Auto Confirm supersedes the preferences specified
found
on the General tab.

a. Select User-defined Directory Set, and click Edit.

Edit the User-defined
Directory Set
b. Adjust the contents of the Directory Set.
a. Select Automatic Directory Set, and click Edit.
Edit the Automatic Directory
Set
b. Adjust the contents of the Directory Set.
Reset the search order
preferences to the default Click Reset to Default.
settings

Specify search locations for documents

You can search specific directories for file types. You also can change the order in which the
directories are searched.
1. Choose File→Preferences→File Locate.

2. On the Document Search Order tab of the AutoFile Search Preferences dialog box, select
User-defined Directory Set, and click Edit.

3. In the User-Defined Directory Set dialog box, do any of the following:

6-4 Getting Started with Product Visualization PLM00109 11.6

 Locating referenced data automatically

To Do this
a. In the Extensions section, click Add.

b. In the Add Extension dialog box, in the Enter new extension

box, type the file type extension that you want to associate
with the directory (for example, .jt), and click OK.

c. In the Extensions section, select the file type extension.

Nota

Associate file types with To specify directories that you want to search but do
directories not want to attach to a specific file type extension,
select Unatt (unattached).

d. In the Directories for Selected Extension section, click Add.

e. In the Select new directory dialog box, browse to the location

of the directory that you want to associate with the selected
file type, select it, and click OK.
The directory is added to the Directories for Selected
Extension list.
a. In the Directories for Selected Extension section, select a
directory, and click Edit Extensions.

b. In the Edit Extensions Assigned To Directory dialog box,

do one of the following:
• In the Extensions section, type the file type extensions
that you want to look for in this directory, and click Add.
Add file types to the list of Separate multiple extensions with spaces.
extensions searched for in
a directory • In the Vis Extensions section, select a file type, and click
Add.

The new extension appears in the Assigned Extensions

section.

c. (Optional) To remove an extension, in the Assigned

Extensions section, select the extension, and click Delete.

PLM00109 11.6 Getting Started with Product Visualization 6-5

 Capítulo
Capítulo 6: 6:Locating
Locating referenced
referenced data data automatically
automatically

To Do this
In the Directories for Selected Extension section, select a
directory, and click Auto Confirm.

Automatically load files Nota

when they are found in a
When you specify Auto Confirm for a directory, you are
directory
never prompted to confirm the opening of any file of the
specified types in this directory, regardless of any other
preferences you have set.

Manage document locations

When you use the File Usage Confirmation dialog box to accept and load documents identified by
AutoFile Search, the file locations are added to the Automatic Directory Set. If you want to include a
location in future searches, you can add it to the User-defined Directory Set.

Dica
As more file locations are added to the Automatic Directory Set, you can manually remove
them from the list. Older locations are automatically removed if the list becomes too long.

1. Choose File→Preferences→File Locate.

2. In the AutoFile Search Preferences dialog box, on the Document Search Order tab, select
Automatic Directory Set and click Edit.

3. In the Extensions section of the Automatic Directory Set dialog box, select a file type.

The Directories for Selected Extension section displays the directories where files of the
selected type were found.

4. Do any of the following:

To Do this
Add a location to the Select a location, and click Move to User Set.
User-defined Directory
Set In the User-defined Directory Set, the location is added to the list
of directories to search.
Delete a directory from the In the Directories for Selected Extension section, select a
list location, and click Delete.
Delete the file type and all In the Extensions section, click Delete.
associated directories
Delete all displayed In the Extensions section, click Clear All.
extensions and directories

6-6 Getting Started with Product Visualization PLM00109 11.6

 Locating referenced data automatically

Specify the part search order

You can specify search behavior for locating part files within multi-site environments.

Exemplo
If you save a 3D model with sub-part assemblies as a shattered JT file, creating individual
JT files for each sub-part, and then move the sub-part files to another location, the Part
Search Order preferences can help you find and load the files.

1. Choose File→Preferences→File Locate.

2. On the Part Search Order tab of the AutoFile Search Preferences dialog box, do any of the
following:

To Do this
Change the Directory Set
Select a Directory Set, and click Move Up or Move Down.
search order
Enable or disable the
Select the User-defined Directory Set, and click Enable / Disable.
User-defined Directory Set
a. Select User-defined Directory Set, and click Edit.
Edit the User-defined
Directory Set b. In the User-defined Part Loading Directory Set dialog box,
click Add, and add a location that you want searched for parts.
Reset the search order
preferences to the default Click Reset to Default.
settings
Select the Consider all changes to this tab as temporary (will
Make temporary changes
be reset after application exit check box.

View search results

Recent search results are displayed on the Search Log tab of the AutoFile Search Preferences
dialog box. You can access detailed information for each search operation. Search results are
displayed with the most recent search at the top of the list.
1. Choose File→Preferences→File Locate.

2. On the Search Log tab of the AutoFile Search Preferences dialog box, do one of the following:

To Do this
a. Select an entry from the list of search results, and click Show
Details.
Display detailed search
information b. In the Search Trace dialog box, select an entry, and click
Show Details.
The details of your selection are displayed.

PLM00109 11.6 Getting Started with Product Visualization 6-7

 Capítulo
Capítulo 6: 6:Locating
Locating referenced
referenced data data automatically
automatically

To Do this
a. Select an entry from the list of search results, and click Show
Details.

b. In the Search Trace dialog box, click Export.

c. In the Select file to save to dialog box, save the file.

Export search results as an

Nota
XML file
Use the SearchTrace.xslt file included in the Examples
directory of your installation to view the XML file as
nicely formatted HTML. Copy SearchTrace.xslt to the
same directory as your XML file, and then open the XML
file in an XSLT-compatible browser, such as Internet
Explorer.

Select an entry from the list of search results, and click Delete.
Remove files from the list -or-
Click Delete All.

Specify part logging preferences

You can specify to log detailed part loading information, such as file locations and moniker data.

Nota
Generating part logging information results in longer part loading times.

1. Choose File→Preferences→File Locate.

2. On the Search Log tab of the AutoFile Search Preferences dialog box, click Part Logging.

3. Choose any of the following:

6-8 Getting Started with Product Visualization PLM00109 11.6

 Locating referenced data automatically

To Do this
Choose one of the following:
• Nothing

• Only missing parts

• Only found parts

Log part loading information • All parts
for individual parts

Nota
To control the number of entries added to the search
log, in the Maximum number of logging events to
record box, type a value. Very large values may cause
out of memory errors.

Select any of the following check boxes:

Log additional information • Unique locations where parts were found

• Include moniker data where appropriate

Delete changes when Select the Changes are temporary (will reset after application
exiting the application exit) check box.

Disabling the File Locator search progress dialog

You can create an environment variable called TCVIS_DISABLE_SEARCH_PROGRESS with
a value of True to disable the File Locator progress dialog. This may be necessary if the dialog
blocks the Teamcenter authentication prompt.

Saving and loading AutoFile Search preferences

You can save your AutoFile Search preferences as a .vfp file, which you can distribute for use with
other installations.

Dica
You also can save AutoFile Search preferences as an .xml file to review your current
settings. However, the application loads .vfp files only.

1. Choose File→Preferences→File Locate.

2. In the AutoFile Search Preferences dialog box, on the General tab, do one of the following:

PLM00109 11.6 Getting Started with Product Visualization 6-9

 Capítulo
Capítulo 6: 6:Locating
Locating referenced
referenced data data automatically
automatically

To Do this
Save AutoFile Search a. Click Save Preferences.
preferences
b. In the Select file to save to dialog box, save the file.
Load AutoFile Search a. Click Load Preferences.
preferences
b. In the Select preference file to open dialog box, open a .vfp
file.

Nota
Loading a preferences file overwrites the current
preferences.

6-10 Getting Started with Product Visualization PLM00109 11.6

Capítulo 7: Saving your work session

Working with session files

Overview of session files

Session files save the state of the viewer so you can resume your work later. Saving your work as a
session file enables you to preserve the following:
• Open files

• Snapshot information

• 3D preferences

• Alternate assembly hierarchies

• True Shading settings

• Cross sections

• 3D Measurements

• User Defined coordinate systems

• 3D layers

• Teamcenter revision rules, effectivity, variant rules, active assembly arrangements, and other
configuration settings.

Exemplo
You are working with model1.jt, model2.jt, and image.tif. You have created snapshots,
changed background colors, and created markup layers. You then save your work as a
.vf session file.
When you re-open the session file, the three files open, and the snapshots, background
colors, and markup layers appear as they were when you saved the session.

Primary and secondary documents

Session files reference primary and secondary documents. A session file can preserve the state of
multiple primary documents, and each primary document may be associated with multiple secondary
documents.

PLM00109 11.6 Getting Started with Product Visualization 7-1

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

Static and configured product structure

In terms of session files, product structure is considered to be either static or configured. Static
product structure is a unique version of the document that is created at the time the session is saved.
This type of data ensures that loading the session at a later time will result in the same product
structure that was loaded when the session was first saved. Configured product structure is dynamic
and references Teamcenter configuration settings. This type of data can be thought of as a recipe
which can be used later to get different document revisions.

Session save options

You have a number of options for saving session data to different locations, depending upon whether
the session consists of local data only or includes data from Teamcenter.
If the session includes only data loaded from your local machine, you can save the session to a
location on your local machine or network.
If the session includes Teamcenter-managed data, you can save the session to the Teamcenter
server in the following ways:
• Attach to Base Document - Save the session within the item revision of the primary document.

• Attach to Selected Bomline - Save the session within the item revision of the selected BOM
line in the 3D assembly tree.

• Alternate Location - Save the session to a different location. Click Browse, and then specify the
folder, item, or item revision within which you want to save the session.

7-2 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

Nota
You can use the Teamcenter Integration Session preferences to specify default session
save options.

Save your work session

You can save your work as a .vf session file. When you open the session file later, your work
is restored.
1. Choose File→Save Session.

2. In Session Storage Location, click one of the following:

Use this option To

Save the session within the Item Revision of
Attach to Base Document
the base document.
Save the session within the Item Revision of
Attach to Selected Bomline
the selected BOM line in the 3D assembly tree.
Save the session to a different location. Click
Browse, and then specify the folder, Item, or
Alternate location
Item Revision within which you want to save
the session.

3. To rename the session file or any secondary documents that you have created during your work
session and not yet saved, such as markup layers or motion documents, double-click the default
name of the document and type a new name.

Nota
You cannot use any non-ASCII character (including 8 bit accented Western European
and multi-byte characters) for a file name.

4. Click Save.
The session file is saved. Any new or unsaved secondary documents are also saved with the
session file to their specified locations.

PLM00109 11.6 Getting Started with Product Visualization 7-3

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

Nota
• If you have unsaved clearance results, the Save Clearance Results As dialog
box appears. You must save to a .txt file to reference the results in a session file.

• If late loading product views are enabled, and the Vis_PV_LateLoadSaveOp

preference is set to Ask, a dialog box appears in which you must choose how to
handle saving partially loaded product views.

• By default, in a four-tier environment, when you launch stand-alone Lifecycle

Visualization from the Teamcenter rich client, the viewer and the rich client share
the same tcserver session. When you perform stand-alone viewer operations,
such as saving a session file, the rich client may appear to lock up until the viewer
operation is finished. If this is a problem, you can configure Teamcenter to create a
separate tcsever session for the stand-alone viewer.

Overview of static and configured product structure

Product structure from Teamcenter is either static or configured. Configured product structure is
dynamically built according to revision rules, effectivity, variant rules, active assembly arrangements,
and other settings, depending on how the structure is initially launched and how the visualization
session is subsequently authored.

Configured structure
The following scenarios result in a configured structure in the viewer:
• From My Teamcenter or the thin client, launch a BOM view or BOM view revision (or any object
that includes a BOM view or BOM view revision, such as an item or item revision) into the
stand-alone viewer or the Lifecycle Viewer. The structure is configured in the viewer according to
your default revision rule.

• From the stand-alone viewer, open a BOM view or BOM view revision (or any object that includes
a BOM view or BOM view revision, such as an item or item revision). The structure is configured
in the viewer according to your default revision rule.

• From Structure Manager, Multi-Structure Manager, or Manufacturing Process Planner in the rich
client, launch one or more BOM lines into the stand-alone viewer or the Lifecycle Viewer. The
structure is configured in the viewer according to whatever configuration is currently active in
the launching application.

• From Structure Manager or Manufacturing Process Planner in the thin client, launch one or more
BOM lines into the stand-alone viewer. The structure is configured in the viewer according to
whatever configuration is currently active in the launching application.

Static structure
The following scenarios result in a static structure in the viewer:
• Perform any process that results in opening a PLM XML file in the stand-alone viewer or the
Lifecycle Viewer. For example, launching a QL file or a DirectModelAssembly dataset results

7-4 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

in the loading of a PLM XML file into the viewer. The viewer treats these data types as static
structure, since a session file authored in the viewer references the static PLM XML.

• Open a VF session file that points to static PLM XML. This occurs under the following conditions:
o The Capture Static Structure check box is selected when the session file is authored.

o The structure in the viewer is saved as PLM XML (File→Save As) before the session is
authored.

VF session files and configured or static structures

Opening a session dataset can result in the loading of a static structure or a configured structure,
depending upon the data and the conditions under which the session authored.
When you save a session referencing configured structure, the session preserves the product
structure configuration active in the viewer. However, if you select the Capture Static Structure
check box in the Session Save As dialog box, the viewer also saves the exact product structure you
have open at the time you save the session. When you load the session later, the viewer detects if
this static structure is available and asks you how you want to open it: as a static structure (the exact
product structure that was active in the viewer at the time the session was saved) or a configured
structure (according to the configuration settings in effect at the time the session was saved). Note
that if the Capture Static Structure check box is not selected when you initially save the session,
when you open the session later the structure is loaded dynamically based on the configuration in
effect at the time the session was saved.
You can set a Teamcenter Integration Preference to automatically handle this when loading a
session. You can choose to:
• Always load the static structure

• Always load the configured structure (the latest version of the structure according to the
configuration settings in effect at the time the session was saved)

• Ask how to load a structure at load time

Merge a saved session with an active session

1. Start a new work session or open a session file.

2. In My Teamcenter, right-click a session dataset and choose Send To→Lifecycle Viewer.

If the sessions can be merged, the Merge Sessions dialog box appears.

3. Click Merge.
The saved session is merged with the contents of the active session.

Specify session preferences

1. Choose File→Preferences→Session.

2. In the Session Preferences dialog box, change any of the following settings:

PLM00109 11.6 Getting Started with Product Visualization 7-5

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

In this section Use this preference To

Session Merge Reuse existing windows if When opening a session while
possible another session is active,
merge the sessions in the
active Viewing window.

Nota
If this option is
not turned on,
the sessions are
opened in separate
Viewing windows.

Ask at load time When attempting to open a

session while another session
is active, display the Merge
Sessions dialog box, from
which you can specify to
merge the session into a single
Viewing window.
Session Save Enable password protection Apply password protection to
for session package .vfz session packages.
Maintain dynamic references When session files are
when possible opened, attempt to update
linked references.

3. Click OK.

Understanding the differences when saving session files or PLM

XML files

Understanding the differences between session files and PLM XML files
When you create alternate hierarchies, add 3D markups to your model, or create snapshots that
contain extended 3D information (for example, camera orientations or behaviors), you can save
your work using either the .vf or .plmxml file types. With .vf and .plmxml formats you can save the
information that cannot be included in file types that you initially read into the application, such
as .jt files.
In Teamcenter lifecycle visualization, both .vf documents and .plmxml documents can contain
extended session data (for example, materials, markups, and sections) as well as product structure.
However, the .vf file type is a binary format that cannot be created or altered outside Teamcenter
lifecycle visualization, while the .plmxml file type is XML, and as long as the contents of the file are
structured according to the PLM XML schema it can be created using any text editor.
The following terms are related to saving your work within Teamcenter lifecycle visualization:

7-6 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

This term Can be defined as

The in memory equivalent of a file.

Model Exemplo
A single assembly within a JT file.

Any data that is not stored in the original 2D/3D

files.

Exemplo
Extended content
3D information, such as visibility,
transforms, materials, lights, sections,
behaviors, and markups.

A container for storing subsets of extended

content.

Exemplo
Snapshot
Captured 3D information, such as
visibility, transforms, materials, lights,
sections, behaviors, and markups.

A container for one or more models and

(optionally) extended content associated with
those models.

Exemplo
• A PLM XML file. A .plmxml
document is product structure
and (optionally) extended content
Document
associated with that document.

• A session file. A .vf file is

a collection of one or more
documents, each containing
product structure and (optionally)
extended content associated with
those documents.

Overview of options when saving session files or PLM XML files

Teamcenter lifecycle visualization offers many options for persisting product structure and extended
3D content, including:
• Standard session file with .jt product structure

PLM00109 11.6 Getting Started with Product Visualization 7-7

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

• Standard session file with .plmxml product structure

• PLM XML session file with .jt product structure

• PLM XML session file with .plmxml product structure

• Session Package File

Session documents (.vf) can be saved from the File menu using the Save Session or Save Session
As options. PLM XML documents can be saved from the menu using the Save As and Export
options. You can use the Save As option to create a PLM XML file that preserves all supported
content from the active 3D Viewing window. Use the Export option to increase control over what is
persisted in the PLM XML file. You can specify what supported content to include and what supported
content to leave out of the exported file.
When saving session files, any derived documents that have not been saved at the time of the
session save, such as markups layers or motion documents, are saved with the session file to the
same location.

Working with session packages

Overview of session packages

Session packages are compressed file archives that enable you to package your work session with
any referenced files. When you create a session package, you can specify to include any files
referenced by your work session. Once the session package is created on your local machine, you
can easily move your work to another location.
Generally, the maximum size of a session package file is 4GB; however other system factors may
impact this limit. For example, since lengths and offsets within JT version 9.x files are 32-bits, the
limitation for packages with these files is 2.1GB. Files of JT version 10 and later have 64-bit offsets,
so packages with these files do not have this limitation.
The number of files that can be included in the session file are:
• In a 64-bit OS: Approximately 64,000 files

• In a 32-bit OS: Approximately 16,000 files

Save a session package

Save all of the files referenced by your work session as a .vfz session package on your local machine.
1. (To password-protect your session package) Click File→Preferences→Session, and then select
the Enable password protection for session package check box.

2. Choose File→Save Session.

The Session Save As dialog box appears.

3. In Session Storage Location, click Alternate Location.

7-8 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

Nota
You must save session packages on your local network or file system.

4. Click Browse and select the folder on your local machine where you want to save the file.

5. Select the Save as Session Package check box.

In Files section, the Package column appears with a check box for the document in the session.

Nota
You can save attachments only as session packages. If you have added attachments to
the work session, the Save As Session Package check box is selected automatically.

6. If you do not want to include a document in the package, clear the check box beside the
document in the Package column.

7. If you want to save the most recent version of configured product structure, select the Capture
static structure check box.

8. Click Save.

9. (If you turned on password protection) In the Password Option dialog box, type a password and
then click OK.
The session package is created and saved on your local machine.

Add attachments to session packages

Save attachments, such as Microsoft Office documents, with your session package.

Nota
Visualization files active in the session, such as open 2D or 3D files and layers, are
automatically included in the session package and do not need to be manually attached.
Attachments enable you to include files that are related but not compatible with Teamcenter
lifecycle visualization, such as spreadsheets or product specifications. When the session
package is opened, you can launch the attachments in their respective applications.

1. Choose File→Attachments.

2. In the Attachments dialog box, click Add.

3. In the Choose attachment file location dialog box, choose the file you want to attach to your
session package, and click Open.
The name of the file appears in the attachment list.

PLM00109 11.6 Getting Started with Product Visualization 7-9

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

Nota
To delete an attachment, select the attachment, and then click Remove.

Open session package attachments

1. Open a session package containing attachments.

2. Choose File→Attachments.

3. In the Attachments dialog box, select the attachment and then click Open.
The attachment opens in the application associated with the file type.

4. (Optional) To save a copy of the attachment, select the attachment and then click Save Copy.

Specify the File Locate preferences for session packages

1. Choose File→Preferences→File Locate.

2. On the General tab of the AutoFile Search Preferences dialog box, click Ask only when
multiple matches are found.

3. On the Document Search Order tab, select Relative File Directory Set and click Move Up
until the selection is the first item in the list.

4. Click OK.

Resolving broken references

Overview of broken references

Session files, PLM XML files, Teamcenter product views, constraint files, motion files, and animation
files contain references to entities in the product structure. As the product structure evolves during
the design process, the entity references in your saved files may no longer be valid. There are many
structure editing scenarios that can result in broken references; for example, a part is removed
from the structure and replaced with different part, or a part is moved from one subassembly to
another within the structure.
When you open or load a file that references entities, the viewer attempts to automatically resolve any
broken references it finds, but there are cases where the system requires your help to determine
how to resolve broken references. In those cases, the Broken References Warning dialog box
appears. You can then:
• Open the Reconcile Reference Dialog dialog box to see list of broken references, find reconcile
candidates, and manually resolve the broken references.

• Use previously saved mapping files to resolve the broken references.

7-10 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

Once you have resolved the broken references, you can re-save the file. You can also export a
mapping file and use it to resolve broken references in other files.

Resolve broken references manually

To manually fix a broken reference, select an unresolved reference, select a reconcile candidate,
and update the reference. You can then save the updated references to a mapping file and use it to
fix broken references in other files that reference the same data.
1. Do one of the following:

To Do this

a. On the Reconcile toolbar, click Reconcile .

Check for and resolve broken
references b. On the Reconcile toolbar, click Validate all
references .
Resolve references when the Broken
Select the Open the Reconcile Reference dialog
References Warning dialog box
check box and click OK.
appears

a. On the Reconcile toolbar, click Reconcile .

Open the Reconcile References
Dialog dialog box b. On the Reconcile toolbar, click Reconcile
Broken References .

The Reconcile References Dialog dialog box appears. Broken references are shown in the tree.

Broken references Intermediate broken references

2. (If you have more that one document open in the session) In the Reconcile Scope section of the
dialog box, select the document to work with from the Document list.

3. (Optional) If the dialog box appears because of broken references in a snapshot or group,
you can select the Context only check box to filter the tree to show only broken references
referenced by the snapshot or group.

4. Select a broken reference in the tree.

A list of possible reconcile candidates appears for the selected broken reference.

5. Do one of the following:

PLM00109 11.6 Getting Started with Product Visualization 7-11

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

• If the candidate is on the list, select it.

• If the candidate is not on the list, use Find to search for other candidates, and then select
the candidate.

• Select the candidate part or assembly in the Viewing window.

• Select the candidate part or assembly node in the assembly tree in the Project Workspace
window.

• If the broken node is no longer needed, and you want to permanently delete the reference
from the tree and the session, click Ignore.

Nota
If you ignore an intermediate broken reference, its children are ignored if not
already resolved.

6. To resolve the broken reference by mapping it to the selected candidate, click Update.

Nota
If you resolve an intermediate broken reference, the system tries to resolve its children
automatically.

7. (Optional) To undo a resolved or ignored reference, select the node and click Restore Original.

8. (Optional) In the Tree Display Options section, select or clear the Resolved References check
box to show or hide the resolved references.

9. To resolve another broken reference, select the reference in the tree and repeat the process.

Dica
You can click Next and Previous to navigate through the tree.

10. Do one of the following to apply the changes:

• Click Apply to apply the changes and continue resolving references.

• Click OK to apply the changes and close the dialog box.

11. (Optional) On Reconcile toolbar, click Export to save the mapping to a mapping file.

12. To apply the new mappings for motion, animation, and clearance files, save the session, and
then reopen it.

7-12 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

Search for reconcile candidates

You can search for reconcile candidates by item name or part ID. You can also use an attribute
filter to find candidates.
1. Select a broken node in the broken references tree. The node name appears in the text search
box next to the Find button.
If the candidate does not appear on the candidate list, you can type a search string to find.

2. Type the search string in the text search box. It is not case sensitive. You can use * as a wild card.

3. (Optional) Do one of the following:

• To limit the search scope, on the Assembly page of the Project Workspace window, select a
node to search. Everything below the selected node will be searched.

• (If the assembly is loaded from Teamcenter) To search for the candidates in the Teamcenter,
set the Use Teamcenter to find candidates, if available reconcile preference.

4. Click Find.
The search results are displayed in the candidate list.
The scope of the search is shown in the Find Scope box.
If necessary, you can click Stop to cancel the search.

5. (Optional) In addition to displaying the search results in the candidate list, you have options to
identify the candidates in the Viewing window and assembly tree. Choose one of the following
from the Show candidates in view list:

Choose this option To

None Do to nothing in the 3D Viewing window or assembly tree.
Show the candidates in the Viewing window and hide all
Show Only
other parts.
Select the candidates in the assembly tree and the
Select Only
Viewing window, and deselect all other parts.

6. (Optional) If searching for name or ID does not find the required candidate, you can use an
attribute filter to search for candidates. If the attribute search finds suitable candidates, select the
candidate and update the broken reference in the Reconcile Reference Dialog dialog box.

Export mapping files

After resolving broken references in a file, you can export a mapping file, and then use it to
automatically resolve broken references in other files that reference the same data.
1. Open a file containing broken references to parts and assemblies.

2. Resolve the broken references.

3. On the Reconcile toolbar, click Export .

PLM00109 11.6 Getting Started with Product Visualization 7-13

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

4. In the Save As dialog box, enter a file name, and then click Save.

Resolve broken references automatically with mapping files

After resolving broken references in a file, you can export a mapping file. You can then import the
mapping file to have it automatically resolve broken references in other files that reference the
same data.

Nota
If you import a mapping file before you open a file with broken references, the mapping
are applied automatically. If you import a mapping file after opening a file with broken
references, save the session and reopen it to apply the mappings.

1. On the Reconcile toolbar, click Reconcile .

2. On the Reconcile toolbar, click Import .

3. In the Open dialog box, select the mapping file and click Open.

4. Do one of the following:

• Open a file with broken references.

• If you already opened a file with broken references, save the session and reopen it to apply
the mappings.

The mapping file is searched for matches for each broken reference. If a match is found, the
part or assembly loads without incident. If a match is not found, you can manually resolve any
remaining broken references.

Validate references
When working with files that contain references to parts or assemblies, you can validate the
references to ensure that they still function.

Exemplo
If you use session files to preserve snapshots of geometry, if the geometry changes the
references may break. Validating the session file tells you if your snapshots work properly,
without activating each snapshot.

1. On the Reconcile toolbar, click Reconcile .

2. On the Reconcile toolbar, click Validate All References .

A progress bar displays the progress of the file validation.

7-14 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

Nota
Click Cancel if you want to stop the validation before it is finished. However, if you
cancel a validation check, your file may contain broken references. Saving a file with
broken references may result in the loss of data.

If your file does not contain broken references, a message informs you that your product structure
references are valid.

3. If your file contains broken references, resolve them before saving the file.

Specify Reconcile preferences

Use the Reconcile preferences to specify whether or not an error message is displayed when a
broken reference is detected, and to customize the handling of candidate references.

1. On the Reconcile toolbar, click Reconcile .

2. On the Reconcile toolbar, click Preferences .

3. In the Reconcile Preferences dialog box, specify the following settings:

Use this option To

Display an error message when a broken reference to
Provide a warning when references
a part or assembly is detected. The error message only
break
appears for the first broken reference found.
Provide Candidates Display a list of potential replacements.
Use the candidate to resolve the broken reference
Use candidate if only one is found
automatically if only one potential replacement is found.
Specify the maximum number of characters that can
Maximum number of candidate differ in a part or assembly name. You can specify a
character differences maximum number of differences from the beginning of a
name, and from the end of a name.
If you specify different values for the options
Use any combination of beginning
from beginning and from end, make the values
and end
interchangeable.
Use Teamcenter to find candidates, If the assembly is loaded from Teamcenter, have Find
if available search for candidates in Teamcenter.

4. Click OK.

Mapping file guidelines

Change Reconcile mapping files adhere to the following structure:
• Map file version

• Locale

PLM00109 11.6 Getting Started with Product Visualization 7-15

 Capítulo
Capítulo 7: 7:Saving
Saving
your your
workwork session
session

• CADID string

• NGID string

For example, a mapping file created in the English locale would resemble this:
Vis Product Structure Mapping File: Version 2
C
"CHLD0000\x00fishing_reel.asm;0;0:\x00handle_assembly_1.asm;0;0:\x00\x00"
"CHLD0000\x00fishing_reel.asm;0;0:\x00yyy_handle_assembly_1.asm;0;0:\x00\x00"
"$$NGID<child>=0\x00$$NGID<chain>=\x22JT_INST_REFID_PDM\x22\x000_TOP_ASM\
x001_YYY_HANDLE_ASM\x00$$NGID<chain>=\x22JT_PROP_NAME\x22\x00CHLD0000\
x00fishing_reel.asm;0;0:\x00yyy_handle_assembly_1.asm;0;0:\x00\x00"

Map file version

The first line of the mapping file must specify the map file version. The current version is 2. However,
the only difference between version 1 and 2 mapping files is the inclusion of NGID strings, which can
be created only with Teamcenter lifecycle visualization. If you are creating mapping files outside of
the Teamcenter lifecycle visualization application, specify version 1. The first line of the mapping file
should look like this:
Vis Product Structure Mapping File: Version 1
Locale
The second line must specify the locale.

Use this abbreviation For this locale

C English
de German
es Spanish
fr French
it Italian
JaPCK Japanese
ko Korean
ZhBIG5 Chinese (Traditional)
ZhGBK Chinese (Simplified)

CADID string (old and new)

The third and following lines must contain a pair of CADID strings, one for the original reference
and one for the updated reference. Each CADID string in the pair must be enclosed in quotes and
separated by a space.
Here is an example of a correctly formatted CADID string:
"CHLD0000\x00fishing_reel.asm;0;0:\x00handle_assembly_1.asm;0;0:\x00\x00"
"CHLD0000\x00fishing_reel.asm;0;0:\x00yyy_handle_assembly_1.asm;0;0:\x00\x00"

Mapping file CADID strings must adhere to the following rules:

• CADID strings must be enclosed in double quotes (“).

7-16 Getting Started with Product Visualization PLM00109 11.6

 Saving your work session

• CADID strings must be NULL delimited. The NULL delimiter is represented by \x00.

• CADID strings must end in two trailing NULL delimiters.

• ASCII values from 0 - 31 (decimal) and 176 - 255 (decimal), all non-ASCII characters, and the
character “ (ASCII value 34 (decimal)), must be converted to the following format for inclusion
in the mapping file:
\xHH, where HH is the hexadecimal ASCII value of the character or the hexadecimal value of the
current byte in the multi-byte character. Thus, if a multi-byte character has two bytes there will be
two values printed out. For example, \xAA\xBB.

NGID string (version 2 mapping files only)

In addition to original and updated CADID strings, version 2 mapping files contain NGID strings.
NGID strings appear after each updated CADID string. NGID strings are enclosed in quotes, and
share the same formatting rules as CADID strings.

PLM00109 11.6 Getting Started with Product Visualization 7-17

Capítulo 8: Saving files and visualization datasets

Exporting 3D models
Overview of exporting 3D models
You can export 3D models in a variety of 3D formats:
• JT files and datasets

• PLM XML files and datasets

• VRML files and datasets

• NASTRAN BULK files and datasets

• ROBFACE files and datasets

Exporting JT files

Overview of exporting JT files and datasets

You can export 3D models in the JT format. You also can set options that affect how the model is
saved.

Nota
• Only visible parts and the assembly hierarchy of those parts are saved.

• Lights assigned to the root node (the "Models" node in the assembly tree) are not
exported when you save a model as a JT file. To save a light source that is assigned to
the root node, you must move it at least one level lower in the assembly tree.

• Materials and material assignments are saved.

• If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Export dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

Export JT files and datasets

Export 3D models in the JT format.
1. Display the parts that you want to save.

2. Choose File→Export.

PLM00109 11.6 Getting Started with Product Visualization 8-1

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

3. In the Export dialog box, browse to the location where you want to save the file, and enter
a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

4. From the File Format list, select DirectModel (*.jt).

5. (Optional) In the Hierarchy list, select an alternate assembly hierarchy or inserted model.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

6. (Optional) Click Options to change settings that affect file content and structure, and then
click OK.

7. In the Affected Files and Directories dialog box, review the list of affected files and directories,
and then click OK.
A progress bar appears as the model is saved. Upon completion, a message informs you if
the model was successfully saved.

8. Click OK.

Specify JT export options

You can set options that affect how the model is saved as a JT file.
1. Choose File→Export.

2. From the File Format list, select DirectModel (*.jt).

3. Click Options.

4. In the JT Export Options dialog box, edit any of the following settings:

8-2 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

In this section Use this option To do this

Choose one of the following assembly structure settings:
• Both assembly structure and parts: Save both the
assembly structure and parts.
Saving
• Assembly structure only: Save only the assembly
structure.

• Parts only: Save only the parts.

Choose one of the following file structure settings:
• Standard (single assembly file, multiple part
File contents files): Save using the standard JT file structure
and structure (single assembly file, multiple part files).

• Shattered (multiple subassembly files, multiple

part files): Save using a shattered file structure
File structure (multiple subassembly files, multiple part files).

• Monolithic (all data saved to a single file): Save

using a monolithic file structure (all data saved to a
single file).

• Maintain the current file structure: Save using the

current file structure.
Include If the model has wireframe data, include it in the exported
wireframe model.
If the model has PMI, include them in the exported JT file.

Nota
JT versions higher than 9.7 do not support
older legacy PMI. If you select this option and
Include PMI attempt to export a model with legacy PMI,
and you choose a JT version higher than 9.7,
a warning appears about data that cannot be
Optional data saved. If you need the PMI data, you can
cancel the export and re-export using a lower
JT version.

Include precise If the model has precise geometry (B-Rep or NURBS

geometry data), include it in the exported JT file.
Save the JT file using Ultra-Lightweight Precise (ULP)
Use Ultra- geometry.
Lightweight
From the compression control list, specify the precision
Precise (ULP)
of the data in the exported file. Choose one of the
format
following settings:

PLM00109 11.6 Getting Started with Product Visualization 8-3

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

In this section Use this option To do this

• 0.001mm accuracy

• 0.01mm accuracy

• 0.1mm accuracy

Nota
ULP data is only supported in JT version
higher than 9.1.

Specify the JT version.

Nota
• JT features introduced in a particular
release are not supported in earlier
versions of the application. However, with
later version JT files, you still may be able
to view the geometry in an earlier Viewer,
although the application will disregard
JT Version
unsupported features.

• When exporting assemblies, if any part in

the assembly is a JT version 8.0 or above
higher, the entire assembly is exported in
the latest JT version present in the model.

• HDR images used in light maps are not

File format
saved in JT files.

Use compression to lower the file size of the exported

Advanced
model. Type a value between 0.0 and 1.0 or use the
Geometric
slider bar to adjust the amount of compression applied to
Compression
the exported model.
Specify how to save images used in texture maps and
light maps. Do one of the following:

Embed images • Select the check box to embed the images in the
in JT files JT file.

• Clear the check box to save images as separate files

in the same location as the JT file.
Fix non-
standard Replace non-standard characters in filenames with
characters in underscores.
filenames

8-4 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

5. Click OK.

Understanding advanced geometric compression

Turning on advanced geometric compression can lower the file size of exported JT files. The amount
of compression applied to the exported model corresponds to a specified value from 0.0 up to 1.0,
with compression disabled at 0.0 and maximized at 1.0. You also can use the slider bar to adjust
the compression level, with less compression applied as you move the slider to the left and more
compression applied as you move the slider to the right.
Regardless of the type of data in the model (tessellated, semi-precise, or precise), all values above
0.0 use advanced geometric compression. Measurement accuracy usually begins to be affected at
values of 0.2 or 0.3. Visual accuracy typically begins to be affected at values of 0.4 or 0.6. These
values are not exact due to possible differences in model geometry.
The table below provides generalized descriptions of the effects of advance geometric compression
at different values.

Compression value Effect on geometry

Lossless compression with no effect on the
0.0 measurement accuracy and appearance of
geometry.
Minimal lossy compression with little if any effect
0.1 on the measurement accuracy and appearance
of geometry.
Moderate lossy compression with a noticeable
0.5 effect on the measurement accuracy and
appearance of geometry.
Aggressive lossy compression with an obvious
1.0 effect on the measurement accuracy and
appearance of geometry.

Understanding the Ultra-Lightweight Precise (ULP) format

The Ultra-Lightweight Precise (ULP) format is a lightweight, semi-precise representation of 3D
geometry in JT files. Due to their smaller size, ULP files load much faster than JT files containing full
B-Rep information, and are nearly as accurate.
ULP data provides you with the following benefits:
• Smaller file sizes than JT files containing full B-Rep data.

• Semi-precise geometry with a measurement accuracy that is much greater than tessellated
geometry and very close to full B-Rep data. Semi-precise measurements typically achieve a
measurement accuracy of 1e-5 meters.

• High quality surface geometry with little deviation of the normal direction or curvature distribution
from the original B-Rep geometry.

• Support for per-face color specifications.

• Support for PMI markups.

PLM00109 11.6 Getting Started with Product Visualization 8-5

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

You can create ULP JT files using the export functionality.

Nota
ULP JT files exported from Teamcenter lifecycle visualization do not contain LODs. To
generate a ULP JT file that contains a LOD, you must use JtOptimize.

ULP compression settings

When creating JT files containing ULP data, it is important to understand the three possible ULP
compression settings that impact the size and accuracy of an exported JT file:

ULP compression setting JT precision (in meters) JT size

50% larger than 0.1mm
0.001mm accuracy 1.E-05
accuracy
25% larger than 0.1mm
0.01mm accuracy 1.E-05 ~ 1.E-04
accuracy
Smallest file size (up to 100
0.1mm accuracy 1.E-04
times smaller than CAD formats)

Nota
Semi-precise measurements that use ULP data are indicated by a tilde and an equals
sign (~=) in the measurement display label.

Exporting PLM XML files

Overview of exporting PLM XML files and datasets

You can export product structure as PLM XML. You also can set options that affect how the product
structure is saved.

Nota
• 3D parts cannot be saved as PLM XML. Use the Absolute File Path or Relative File
Path PLM XML export options to reference the original locations of your JT files, or
use the JT Geometry Creation option to create new JT files.

• You also can save extended 3D content to session files.

• Materials and material assignments are saved, except when the initial JT has
assembly-level assignments not authored in Teamcenter lifecycle visualization. In that
case, those assembly-level material assignments are not saved.

• If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Export dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

8-6 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Export PLM XML files and datasets

Export product structure as PLM XML.
1. Choose File→Export.

2. In the Export dialog box, browse to the location where you want to save the file, and enter
a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

3. From the File Format list, select Product Structure (*.plmxml).

4. (Optional) In the Hierarchy list, select an alternate assembly hierarchy or inserted model.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

5. (Optional) Click Options to change settings that affect file content and structure.

6. Click OK.

7. In the Affected Files and Directories dialog box, review the list of affected files and directories,
and then click OK.
A progress bar appears as the model is saved. Upon completion, a message informs you if
the model was successfully saved.

8. Click OK.

Nota
• If you have unsaved clearance results, the Save Clearance Results As dialog
box appears. You must save to a .txt file to reference the results.

• If you have unsaved motion files, a Warning dialog box appears asking if you want
to save the changes to a file.

Specify PLM XML export options

You can set options that affect how the product structure is saved as PLM XML.
1. Choose File→Export.

2. From the File Format list, select Product Structure (*.plmxml).

PLM00109 11.6 Getting Started with Product Visualization 8-7

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

3. Click Options.

4. In the PLMXML Export dialog box, edit any of the following settings:
On this tab Use this option To do this

Product Structure Data Include product structure.

Product View Data Include product view data.

Include the current state of the document.
Provided they are within the current session,
you can specify to include any of the following
3D elements:
• Jack

• Camera Orientation

• Part Display Mode

• Visibility

• Selection

• Active Hierarchy

• Markup Layers
General
• Transforms
Current State of
Document • Behaviors

• Layer Filters

• Reference Sets

• PMI

• Material Assignments

• Light Assignments

• Texture Coordinate Assignments

• CAE

• Visual Report

• True Shading

8-8 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

On this tab Use this option To do this

• Exploded Views

• Coordinate System

• Cross Sections

• Constraint

• Measurements

• Volume Clipping

• Hide Obscuring
Document Description Include a description.
Visible Product Structure Save visible product structure only.
Complete Product Save all product structure contained within the
Structure model.
Include the assembly-level attributes from
Include late loaded Teamcenter even if you have not downloaded
Product attributes them for viewing. If not checked, only
Structure downloaded attributes are saved.
Absolute File Path Save references using absolute file paths.
Relative File Path Save references using relative file paths.
Export a JT file for each part reference. JT files
JT Geometry Creation created using this option are saved in the same
location as the exported PLM XML file.
Product View [a list of your snapshots] Specify which snapshots to save with your file.

5. Click OK.

The changes are saved to the registry on your local system and become the default settings.

Exporting VRML files

Overview of exporting VRML files and datasets

You can export 3D models in the VRML 1.0 format. You also can set options that affect how the
model is saved.

Nota
If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Export dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

PLM00109 11.6 Getting Started with Product Visualization 8-9

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

Export VRML files and datasets

Export 3D models in the VRML 1.0 format.

1. Choose File→Export.

2. In the Export dialog box, browse to the location where you want to save the file, and enter
a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

3. From the File Format list, select VRML 1.0 (*.wrl).

4. (Optional) In the Hierarchy list, select an alternate assembly hierarchy or inserted model.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

5. (Optional) Click Options to change settings that affect file content and structure.

6. Click OK.

7. In the Affected Files and Directories dialog box, review the list of affected files and directories,
and then click OK.

A progress bar appears as the model is saved. Upon completion, a message informs you if
the model was successfully saved.

8. Click OK.

Specify VRML export options

You can set options that affect how the model is saved as a VRML file.

1. Choose File→Export.

2. From the File Format list, select VRML 1.0 (*.wrl).

3. In the Save As VRML dialog box, edit any of the following settings:

8-10 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Use this option To do this

Select the amount of detail to be saved:
• LOD: All Level of Detail
LOD
• LOD: Highest Level of Detail

• LOD: Lowest Level of Detail

Bounding Box Only Save simplified geometry for testing or review.
Save the model with VRML instancing.

Exemplo
Use VRML Instancing If you want to save four identical
wheels, you can save the geometry
of one wheel and use instancing to
represent the others in the model.

Save the model with visible polygons (positive

Backface Culling
vector) only.

4. Click OK.

Exporting NASTRAN BULK files

Overview of exporting NASTRAN BULK files and datasets

You can export 3D models in the NASTRAN BULK format.

Nota
• For the NASTRAN BULK (BLK) format, Teamcenter lifecycle visualization turns
polygons and tristrips from visible parts into triangles, and then translates them into the
CTRIA3 element type. Polyline sets or point sets are ignored.

• Different parts are assigned different PIDs (property IDs) in the exported file.

• Material properties, load cases, and boundary conditions are ignored. This means that
the exported BLK file cannot be used directly by NASTRAN for analysis purposes
without manually adding additional information.

• Teamcenter lifecycle visualization cannot load BLK files. The application can only
export them.

• If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Export dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

PLM00109 11.6 Getting Started with Product Visualization 8-11

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

Export NASTRAN BULK files and datasets

Export 3D models in the NASTRAN BULK format.

1. Choose File→Export.

2. In the Export dialog box, browse to the location where you want to save the file, and enter
a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

3. From the File Format list, select NASTRAN BULK (*.blk).

4. (Optional) In the Hierarchy list, select an alternate assembly hierarchy or inserted model.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

5. In the Save As NASTRAN BULK dialog box, click OK.

6. In the Affected Files and Directories dialog box, review the list of affected files and directories,
and then click OK.
A progress bar appears as the model is saved. Upon completion, a message informs you if
the model was successfully saved.

7. Click OK.

Exporting ROBFACE files

Overview of exporting ROBFACE files and datasets

You can export 3D models in the ROBFACE format. You also can set options that affect how the
model is saved.

8-12 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Nota
• Teamcenter lifecycle visualization cannot load ASY files. The application can only
export them.

• If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Export dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

Export ROBFACE files and datasets

Export 3D models in the ROBFACE format.
1. Choose File→Export.

2. In the Export dialog box, browse to the location where you want to save the file, and enter
a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

3. From the File Format list, select ROBFACE (*.asy).

4. (Optional) In the Hierarchy list, select an alternate assembly hierarchy or inserted model.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

5. (Optional) Click Options to change settings that affect file content and structure.

6. Click OK.

7. In the Affected Files and Directories dialog box, review the list of affected files and directories,
and then click OK.
A progress bar appears as the model is saved. Upon completion, a message informs you if
the model was successfully saved.

8. Click OK.

Specify ROBFACE export options

You can set options that affect how the model is saved as a ROBFACE file.

PLM00109 11.6 Getting Started with Product Visualization 8-13

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

1. Choose File→Export.

2. From the File Format list, select ROBFACE (*.asy).

3. In the Save As ROBFACE dialog box, edit any of the following settings:

Use this option To do this

Save assembly file Include the assembly file (.ASY).
Include the metadata for each node of the
Include metadata for all nodes
assembly.
Save part files Include the part file (.JT).
Select the amount of detail to be saved:
• LOD: High Level of Detail
LOD
• LOD: Medium Level of Detail

• LOD: Low Level of Detail

4. Click OK.

Saving 3D documents as PLM XML

Overview of saving 3D documents as PLM XML

You can save 3D documents as PLM XML. Functionality persisted with PLM XML includes extended
3D content such as transformations and camera orientations, 3D snapshots, and product structure.
Also included are references to motion files, clearance results files, JT files, and other PLM XML files.

You can use the Save As option to create a PLM XML file that preserves all supported content from
the active 3D Viewing window. Use the Export option to increase control over what is persisted in the
PLM XML file. You can specify what supported content to include and what supported content to
leave out of the exported file.

Use the PLM XML preferences to change options for how PLM XML files are saved.

Nota
• 3D geometry cannot be saved as PLM XML. To save parts as a supported 3D format,
you must use the Export option.

• You can also save 3D snapshot information as session files.

• Materials and material assignments are saved, except when the initial JT has
assembly-level assignments not authored in Teamcenter lifecycle visualization. In that
case, those assembly-level material assignments are not saved.

8-14 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Save the active 3D document as PLM XML

1. Choose File→Save As.

2. (Optional, if the PLM XML Preferences are set to appear when you save a PLM XML file) Adjust
the PLM XML Preferences, and then click OK.

3. In the Save File dialog box, browse to the location where you want to save the file, enter a
name for the file, and click Save.
The model is saved as PLM XML.

Nota
• You cannot use any non-ASCII character, including 8 bit accented Western
European and multi-byte characters, for a file name.

• If late loading product views are enabled, and the Vis_PV_LateLoadSaveOp

preference is set to Ask, a dialog box appears in which you must choose how to
handle saving partially loaded product views.

Export the active 3D model as a PLM XML file

1. Choose File→Export.

2. In the Export dialog box, In the File section, browse to the location where you want to export the
file, and enter a name for the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

3. In the File format section, select Product Structure (*.plmxml).

4. (Optional) In the Hierarchy section, select an alternate assembly hierarchy.

Nota
If the 3D model does not include an alternate assembly hierarchy, then the Hierarchy
list only includes one choice, Model, which represents the original assembly hierarchy.
You can create alternate hierarchies using the Assembly tool.

5. (Optional) In the Hierarchy section, select an inserted model.

6. Click OK.
A progress bar appears as the model is saved. Upon completion, a dialog box appears indicating
that the model was successfully saved.

PLM00109 11.6 Getting Started with Product Visualization 8-15

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

Specify PLM XML preferences

1. Choose File→Preferences→PLM XML.

2. In the PLMXML Preferences dialog box, on the Save tab, change any of the following options:

Use this option To do this

Include extended 3D information captured with
Save extended 3D content into PLMXML
snapshots.
Save inserted models Include inserted models.
Copy parts locally Create local part copies in the JT format.
Retain references to original Product
Keep the model's original product structure.
Structure
Include all assembly-level attributes from
Teamcenter even if you have not downloaded
Include late loaded attributes
them for viewing. If not checked, only
downloaded attributes are saved.
Open the PLMXML Preferences dialog box
Always ask at save time
when you use save a session file.

Convert 3D files to DirectModel

If you have the appropriate optional translators installed and licensed, when you open a 3D model file
in the following formats, the file is translated to the .jt file format:
• VRML (.wrl, .vrml)

• STL (.stl, .sla)

• IGES (.igs, .iges)

• STEP (.stp)

• DXF (.dxf)

• DWG (.dwg)

Nota
• For DWG, DXF, and IGES files, surfaces are the only 3D objects translated to the .jt
format. You can open DWG, DXF, and IGES files that contain line drawings as 2D
images.

1. Choose File→Convert Model.

8-16 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Dica
If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Open File to Translate dialog box. You can
press Ctrl-Break (Windows) or Esc (Mac and Linux) to stop the file listing at any point.

2. In the Open File to Translate dialog box, browse to the file, and click Open.

3. In the Choose File to Translate to dialog box, type a name for the translated file and browse to
the location where you want to save it.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

4. (To open the file) Select Open File After Translation.

5. Click Save.
The file is translated into a JT file.

Save 3D markup layers

1. In the Assembly view, select the layers you want to save, right-click and choose a save
option from the list.

2. Choose one of these options:

Choose this option To save

All markup layers associated with the base document.

Nota
Save All Layers
Modified markup layers are saved to their associated markup
datasets. New layers are saved to a new markup dataset.

Save Selected Layers Highlighted markup layers associated with the base document.
Save Selected Layers Highlighted markup layers as a new markup dataset associated with
As the base document.

3. In the Save dialog box, select or type the name of the markup layer file to save.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

PLM00109 11.6 Getting Started with Product Visualization 8-17

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

4. Click Save.
(If you chose Save All Layers) A new Save dialog box appears for each markup that you save.

Nota
When you create or edit a 3D layer, a pen and arrow icon appears before the name of
the markup layer in the Markup Layers list until you save the layer. When you save the
layer, the icon disappears until the layer is edited again.

Save an image of a 3D model

Capture and save an image of a 3D model in a 2D raster format.
1. Display the model parts to include in the view.

2. Navigate the model until the Viewing window displays the view you want to save.

3. Choose Actions→Image Capture.

A 2D image of your model appears in your Viewing window.

4. Save the image as a .bmp, .tiff, .png, .jpg, or .ps file.

Save your 3D assembly as a text file

When you can save the assembly as a text file, you can choose to include all parts in the model, or
only those parts that are currently displayed.
1. Choose Tools→Assembly.

2. Expand or collapse the assembly until it displays the level of detail you want to save.

3. Choose Assembly→Save Indented, then and select Visible or Full.

Use this option To do this

Save a text file that includes only the nodes for
Visible
parts that are currently displayed
Save a text file that includes nodes for parts
Full
that are hidden and displayed

4. In the Save or Save As dialog box, browse to the appropriate file path.

Dica
If you have directories containing hundreds or thousands of files, it may take a while for
the complete list of files to appear in the Save As dialog box. You can press Ctrl-Break
(Windows) or Esc (Mac and Linux) to stop the file listing at any point.

8-18 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

5. In File name, type a name for the text file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

6. Click Save.

Save a graphic for Teamcenter Content Management

You can save 2D images or 3D models so that they can be used as 2D graphics in print and online
publications that are managed in Teamcenter Content Management.
If the 3D model changes, you can recapture the image in Teamcenter lifecycle visualization to update
it in Content Management.

1. In Teamcenter, send a 2D image or 3D model to the stand-alone application viewer or the

Lifecycle Viewer.

2. In Teamcenter lifecycle visualization, choose File→Publish 2D graphic to Teamcenter Content

Management.

Nota
This option is available only if the graphic is stored in Teamcenter.

3. In the Graphic Option dialog box, do the following:

For this option Do this

Name Type a name for the graphic.
Graphic Usage Do one of the following:
• Select the Use Graphic Usages from Graphics
Mapping check box to use the graphic usages defined in
the ctm0GraphicUsagePref preference.

• Select the graphic usages that you want to assign to this

graphic option:

Cuidado
Each graphic option of the same graphic file
must have unique usages. For example, do
not use piston.png and piston.gif both with the
VIEW option.

PLM00109 11.6 Getting Started with Product Visualization 8-19

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

For this option Do this

If the graphic will be used for Select this graphic

this purpose usage
Icon in published output. ICON
High-resolution graphic in PDF
printed output.
Graphic in a resolution PRINT
appropriate for the printer
where it will be printed.
Small-scale image. THUMBNAIL
Low-resolution image, typically VIEW
for viewing only.
Image to appear in a Web WEB
browser.
Graphic Attribute Select the appropriate graphic attribute defined by your
application administrator.
Graphic Classname Select one of the following:
• Graphic—for non-S1000D content.

• S1000D Graphic—for S1000D content.

Language Select the languages for the graphics being saved, or choose
Multilanguage if the graphics have no specific language
associated with them. A separate graphic option will be
saved for each language you choose.

Nota
For S1000D graphics, select the site master
language. The S1000D standard does not require
you to associate a language with graphics, and the
S1000D graphic attribute mapping that is provided
with the Content Management installation does not
support multiple languages for graphics.

8-20 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

For this option Do this

Overwrite Mode Select one of the following:

Nota
If you select neither overwrite mode, the graphic
will be saved as a new graphic if a graphic option
with the same Original Imported Name property
and graphic usage does not already exist in the
system.

• Skip existing
The graphics are not saved if they already exist in
Content Management.

• Overwrite existing
If the graphics already exist in Content Management,
they are overwritten.
If you select Overwrite existing, select one of the
following usage handling options:

Dica
To view the usages associated with an existing
graphic option, right-click the graphic option
revision, and choose View Properties.

Nota
Edit, publish, and export functions always use
the latest revision of graphic options. If you
revise a graphic, the new revision appears in
all content that it is referenced in. If you want
to change a graphic but you do not want the
graphic updated in all content, you must save
the changed graphic as a new graphic with a
different name.

o Keep
The usages of the existing graphics are retained.

o Merge

PLM00109 11.6 Getting Started with Product Visualization 8-21

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

For this option Do this

The usages of the existing graphics are retained, and

the new usages selected for this save are added to
the graphics. For example, if a graphic being saved
already exists with the VIEW and WEB usages,
and the selected usages in the Graphic Options
dialog box are THUMBNAIL and ICON, the graphic
is saved with the VIEW, WEB, THUMBNAIL, and
ICON usages.

o Overwrite
The usages of the existing graphics are removed
and replaced by the usages selected in the Graphic
Options dialog box.

4. Click Next.

5. In the Export Image dialog box, adjust the settings as needed.

Dica
A resolution of 72 DPI is suitable for images to display on a monitor (e-mail and web
pages). Use a resolution of at least 300 DPI for print content.

6. Click Finish.

Nota
If your organization uses watermarks, a watermark page may appear before you can
click Finish.

The graphic is saved in Teamcenter.

7. In Content Management, search for the graphic, and then move it to the folder where you want
to store it.

8. Right-click the graphic option revision, and choose Copy For Editor→Graphic Content.

9. In the editing tool, right-click the valid position in the topic where you want to insert the graphic,
and choose Paste.
The graphic reference is inserted in the topic’s XML, using the tag information from your Graphic
Link Clipboard preference and the identifying information for the graphic file.

8-22 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Update a graphic for Teamcenter Content Management

If you add a Teamcenter lifecycle visualization graphic to a topic in Teamcenter Content Management
and the 2D image or 3D model changes, you can recapture the image to update the graphic in
Content Management.
This procedure is also useful if you use the graphic in translated content and need to associate
the graphic with a different language.

Nota
• If you update a graphic that is included in published content, you mush republish the
content for the update to appear.

• Edit, publish, and export functions always use the latest revision of graphic options. If
you revise a graphic, the new revision appears in all content that it is referenced in. If
you want to change a graphic but you do not want the graphic updated in all content,
you must save the changed graphic as a new graphic with a different name.

1. In Teamcenter, send a 2D image or 3D model to the stand-alone application viewer or the

Lifecycle Viewer.

2. Choose File→Publish 2D graphic to Teamcenter Content Management.

Nota
This option is available only if the graphic is stored in Teamcenter.

3. In the Graphic Option dialog box, adjust the settings as needed.

Dica
• If you are using the graphic in translated content and need to associate the graphic
with a different language, select the language from the Language list.

• To update an existing graphic with modifications you make to a 3D model, select

Overwrite existing under Overwrite Mode, and then select one of the following
usage handling options:
o Keep
The usages of the existing graphics are retained.

o Merge
The usages of the existing graphics are retained, and the new usages selected
for this save are added to the graphics. For example, if a graphic being saved
already exists with the VIEW and WEB usages, and the selected usages in the
Graphic Options dialog box are THUMBNAIL and ICON, the graphic is saved
with the VIEW, WEB, THUMBNAIL, and ICON usages.

PLM00109 11.6 Getting Started with Product Visualization 8-23

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

o Overwrite
The usages of the existing graphics are removed and replaced by the usages
selected in the Graphic Options dialog box.

4. Click Next.

5. In the Export Image dialog box, adjust the settings as needed.

Dica
A resolution of 72 DPI is suitable for images to display on a monitor (e-mail and web
pages). Use a resolution of at least 300 DPI for print content.

6. Click Finish.

Nota
If your organization uses watermarks, a watermark page may appear before you can
click Finish.

The graphic is saved in Teamcenter.

Save 2D layers
1. In the Assembly view, select the 2D layers you want to save.

2. From the File menu, choose an option:

Use this option To do this

Save All Layers Save each 2D layer independently.
Save the selected 2D layer with a new file
name.

Dica
Save Selected Layers As
You can select layers by clicking
the layer in the Assembly view. To
select multiple layers, hold the Ctrl
key while you click.

Export Combined Layers Save all selected 2D layers as one 2D layer file.

3. In the Save dialog box, select or type a file name.

8-24 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

4. In Save as type, choose a CGM version.

The 2D layer is saved with a .cgm file extension.

Nota
If you selected multiple 2D layers and chose the Save Selected Layers As option, you
are prompted with more than one Save As dialog box.

Export images, create watermarks, and save 2D images

1. Choose File→Export Image.

2. From the Export Image dialog box, choose from the following options:

On this tab Use this option To do this

Export your view as one of the following:
• Image – the application exports the entire
image, including markup layers. For
example, even if the Viewing window
displays only a portion of the complete
image, the application saves the complete
image.

• View (WYSIWYG) – the application

exports just the viewable image from the
Viewing window only.
Export Export
• Document – the application exports the
entire document, including all pages and
markups as either PDF or CGM.

Nota
o When you export a PDF
file as a PDF file, an exact
copy of the input PDF file
is exported. That is, the
original quality of the PDF is
exported.

PLM00109 11.6 Getting Started with Product Visualization 8-25

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

On this tab Use this option To do this

o When you export a PDF

file as a Document file,
changes in text output, for
example background color,
are not supported.

Change the dots per inch (DPI).

Nota
Resolution Increasing the resolution does not
improve the quality of the output for
2D raster files; it only increases the
file size.

Check Retain dpi to store and retain your

selected dpi setting in the registry. This value
is recalled each time you navigate to Export
Retain dpi Image.
If the option is cleared, the application
calculates an appropriate dpi.
Choose the units of measurement in which to
Units
export the image.
Select the percentage of size the exported
Ratio to Original Image image will appear compared to the original
image.
Select one of the following modes:
• Black and White
Color Mode
• Grayscale

• Color
Choose a file type from the list.

Nota
• Exporting TIFF images:

Type o To export 1-bit TIFF

white-out layers, from
Type select tif, and from
Color Mode select Black
and White.
Select Enable masking
/ white-out to enable

8-26 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

On this tab Use this option To do this

white-out effects. Clear
this option to bypass the
white-out capability.

o When you export an image

to TIFF, the output file
conforms to TIFF 6.0
standards.

o If you select TIFF with a

Black and White Color
Mode, the output file
compression standard is
TIFF CCITT Group 4.

• Exporting Color and Grayscale

images:
o Color and Grayscale are
supported for JPEG files
(.jpg). Color is supported
for PostScript (.ps) and for
JPEG 2000 (.pg2 and .jpc)
files.

• Exporting HP RTL images:

o To export HP RTL images,
from Type, select hpgl.

• Exporting JPEG images:

o Select the quality level of an
exported JPEG by setting
the value from 1–100.
The default is set at 98.
When you increase the
quality of the image by
increasing this value, you
also increase the size of
the file. You can often
decrease the file size and
maintain acceptable results
by lowering the value.

Specify a compression option for a color or

Compression grayscale TIFF file.

PLM00109 11.6 Getting Started with Product Visualization 8-27

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

On this tab Use this option To do this

Dica
• From the list, click one of these
options; None, PackBits, or
Deflate(ZIP).

• Choose a compression standard

that is supported by your viewer.

Watermark Activate the watermark option.

Click one of the following:
• Select Font, to choose a font name, style,
Font size and color.

• Auto Scale Font Size, to automatically fit

the text to the available space.
Add watermark text.

Nota
(Windows only) For additional
watermark options, right-click,
point to Insert and choose one of
following:
• Date
Watermark
• Time

• File
Watermark
• Path and File

• UserID

• Page

Nota
If the administrator creates an
MDS file, the Watermark option is
unavailable.

8-28 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

On this tab Use this option To do this

Choose the direction of the text.

Nota

Watermark text location The text can appear diagonally, from

lower left to upper right or upper
left to lower right, or it can appear
horizontally in the center of the
document.

Render the text as solid.

Nota
• A watermark that covers the
underlying document appears
Opaque
on the printed document.

• When you export a PDF file as

a Document file, opaque is not
supported.

Render the text as half tone.

Nota
• 50% of the underlying document
appears on the printed
Transparent
document.

• When you export a PDF file as

a Document file, transparent is
not supported.

Select a background color for your Watermark.

Nota
• By default, Background Color is
unchecked.
Background Color
• By default, white is the selected
background color.

• When you export a PDF file as

a Document file, background
color is not supported.

PLM00109 11.6 Getting Started with Product Visualization 8-29

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

3. Click OK.
A second Export Image dialog box appears.

4. (Optional) Specify a new file name and, if necessary, browse to a directory in which you want
to save the file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

5. Click Save.
The 2D image is saved with the file name and extension you specified. The original image
is unchanged.

Nota
You can use any of the following features when you export (save) a 2D image:
• Save the 2D image exactly as it is displayed in the Viewing window (a zoomed in
view, for example). You can also save the entire 2D image and any markup layers
associated with it.

• Export the 2D image to other supported file format, for example export a TIFF file and
convert it to PDF.

• Create a Watermark that is placed on the 2D image. The watermark is saved on all
pages of your 2D image.

• Export document files using PDF or CGM file type options. In each instance, you can
export multiple-page documents.

8-30 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Vector images are not affected by resolution settings. Notice that Resolution has been
removed from the Output section of the Export Image dialog box for vector output.

Creating uniform watermark stamps when exporting files

Save 2D layers using Image Capture

You can use Image Capture to capture the view of your image exactly as it is displayed in the Viewing
window, including all visible markups. The captured image appears in a new Viewing window. You
can then save this view.
1. Choose Actions→Image Capture.

2. Save the Image Capture in one of the following ways

• Choose File→Save All Layers.

• After closing the Viewing window, click Yes when the application prompts you to save
changes.

3. In the Save As dialog box enter a name for the file in File name.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

4. In Save as type, select the CGM version of your choice.

5. Click Save.

PLM00109 11.6 Getting Started with Product Visualization 8-31

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

The application displays the saved Image Capture in the Viewing window.

Nota
For best results when viewing the image with markups, zoom the image to a 1:1 scale.

6. To save the image in Metaphase, choose File→Save All Layers.

7. The Save dialog box appears, prompting you to type a name for each layer file.

Nota
You cannot use any non-ASCII character, including 8 bit accented Western European
and multi-byte characters, for a file name.

8. Click Save All Layers.

The layer files are saved in Metaphase with a .png extension.

Save 2D images as PVL files

You can save the currently displayed 2D image as a text file by generating a .pvl file or macro. You
can save the .pvl as a file on disk or you can automatically send it to a user-defined macro. The .pvl
text file gets binary or PDF data by pointing to or referencing the location of the source file.

1. Choose File→Export Image View List.

2. From the Export Image View List dialog box, select from the following options:

Choose this option Then do this

a. In the Specify Filename dialog box, in File
Name, type a name for your file.

Nota
You cannot use any non-ASCII
character, including 8 bit
accented Western European
Save to File
and multi-byte characters, for a
file name.

b. In Save as type, select PVL Files (*.pvl).

c. Navigate to where you want to store the

file and click Save.

8-32 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Choose this option Then do this

No further action is necessary.

Nota
• When you execute the macro,
the information is saved in
a temporary directory. This
directory is then emptied when
Execute Macro
you exit the program.

• If the EAI_SAVE_PVL_MACRO
environment variable is not
defined, you cannot execute the
macro and an error message
will appear.

The .pvl file is generated.

Generated .pvl example

You can use the following .pvl text file to get an understanding of how these files are coded.
# ViewList { background job ... }
# create ViewSet
#
# load the base layer document into the view:
Sheet Open BaseLayer "C:\Program Files\EAI\OEV\Examples\2d\biggear1.dwg"
#
# load layer 1 into the view:
Sheet Open Layer1 "C:\Temp\VisProd18027c\vvBGPrintTmp0\layer1.cgm"
#
# load layer 2 into the view:
Sheet Open Layer2 "C:\VisProd18027c\vvBGPrintTmp0\layer2.cgm"
#
# Open the document:
ViewSet Open ThisViewSet BaseLayer Layer1 Layer2
# Viewport settings of the view:
ViewSet Set Viewport ThisViewSet Absolute 8.956356 8.532558 26.922378 22.564855
# Base Layer Page: 1 of 1
# Base Layer Width: 26.922378
# Base Layer Height: 22.564855

Code explanation
• General Notes
o Comment records begin with the "#" character.

o In the following, the term "layer" refers to both the original and markup layers to be written to
the .pvl file from the Viewing window.

PLM00109 11.6 Getting Started with Product Visualization 8-33

 Capítulo
Capítulo 8: 8:Saving
Saving files visualization
files and and visualization datasets
datasets

• # ViewList {comment text}

o This message must be the first line in a View List file and the syntax is specific.

o "comment text" can be any comment or nomenclature.

o The "{ background job ... }" string will identify .pvl files generated from the Export Image
View List command.

• # Sheet Open

o Each sheet will have a unique name and will identify one file.

o This command will appear for each layer that is to be written to the .pvl file from the active
view.

o The base layer will be identified first, followed by the added markup layers.

o The markup layers are saved as temporary files and are automatically deleted when the
application exits.

• # ViewSet Open

o After opening an individual sheet for each layer in the view, this command combines the
sheets into a single view.

o Each ViewSet will have a unique name (up to 40 characters) and will reference all layers
visible in the view. For Export Image View List PVL files, this will always be "ThisViewSet."

• # ViewSet Set Viewport

o The name of the ViewSet is again identified.

o The key word "Absolute" identifies that the numbers that follow are real numbers that identify
the following coordinate pairs:

■ x and y coordinates for the center of the viewport (uses units from the sheet)

■ x and y indicating the width and height of the viewport (uses units from the sheet)

• #Base Layer Page

o The page of the base layer currently being viewed

• #Base Layer Width

o The width of the base image.

• #Base Layer Height

o The height of the base image.

8-34 Getting Started with Product Visualization PLM00109 11.6

 Saving files and visualization datasets

Setting PVL macro environment variables

Purpose
When you export an image to a macro, the program uses a .pvl file type. You declare which
program the .pvl file is passed to by setting the EAI_SAVE_PVL_MACRO environment variable. You
can also specify how you want the PVL layers to be processed by setting the EAI_SAVE_PVL_LAYERS
environment variable.
Add an environment variable
1. Choose Start Menu→Control Panel.
The Control Panel dialog box appears.

2. Select Performance and Maintenance and then select System, or just select System.
The System Properties dialog box appears.

3. Select the Advanced page.

4. Click Environment Variables.

The Environment Variables dialog box appears.

5. From User Variables, select New.

The New User Variable dialog box appears.

6. In Variable Name, type: EAI_SAVE_PVL_MACRO.

7. In Variable Value, type the value of the executable.

8. Click OK.

9. In the Environment Variables dialog box, click OK.

Set the environment variable for PVL layers

• The environment variable is EAI_SAVE_PVL_LAYERS.

• To add all layers

In Variable Value, type ALL.

• To add only visible layers

In Variable Value, type VISIBLE.

Sample .pvl file.

PLM00109 11.6 Getting Started with Product Visualization 8-35

Capítulo 9: E-mailing your work

Capture and E-mail an image of the Viewing window

Nota
(Windows only) To send e-mail from the viewer through an MAPI e-mail program like
Microsoft Outlook, the viewer and e-mail program must have the same bitness. If one is
32-bit and the other is 64-bit, you get a warning message and no message is sent.

• Choose File→Send Mail→Image Capture File.

A .png image capture of the Viewing window is created and attached to a new e-mail message.

E-mailing your work session as a .vfz collaboration file

Overview of e-mailing your work session

You can package all of the files involved in your work session into a single .vfz collaboration file,
which you can e-mail to other members of your organization. You can specify to package the session
contents of all open Viewing windows or only the contents of the active Viewing window.

Nota
• To create .vfz collaboration files, you must have the Professional or Mockup service
level, along with an additional .vfz collaboration file license.

• You can open .vfz collaboration files in any viewer service level.

• You can edit, repackage, and re-send the data from existing collaboration files if you
have the Standard, Professional, or Mockup service level.

• (Windows only) To send e-mail from the viewer, through an MAPI e-mail program like
Microsoft Outlook, the viewer and e-mail program must have the same bitness. If one
is 32-bit and the other is 64-bit, you get a warning message and the e-mail is not sent.

Introduction to .vfz collaboration files

You can use the .vfz collaboration format to share your work with suppliers or other members of your
organization. A .vfz collaboration file consists of the visible contents of the active Viewing window or
all open Viewing windows, including externally referenced files and attachments. You can specify

PLM00109 11.6 Getting Started with Product Visualization 9-1

 Capítulo
Capítulo 9: 9:E-mailing
E-mailing
your your
workwork

to export JT files with full B-Rep data, PMI markups, and LOD information, or as Ultra-Lightweight
Precise (ULP) data.
It is important to understand the distinction between creating new .vfz collaboration files and editing
existing files. Creating entails opening, inserting, or merging 2D and 3D documents, which are
packaged as a new .vfz collaboration file and sent to collaborators; it requires the Professional or
Mockup service level, along with an additional .vfz collaboration file license. Editing consists of
repackaging the data from an original .vfz file with new content, such as markups, snapshots, groups,
and measurements; it requires the Standard, Professional, or Mockup service level.

Creating .vfz collaboration files

After you open documents from your local file system or Teamcenter, you can package the data as a
new .vfz collaboration file and send it to your collaborators. Creating .vfz collaboration files requires
the Professional or Mockup service level, along with an additional .vfz collaboration file license.
The following components are included in collaboration files:
• Copies of 2D image files

• Copies of visible 3D parts

• Attachments

• A .vfz session file that includes an automatically generated snapshot

Nota
If you are working with files in multiple Viewing windows and the collaboration
preferences are set to package all views, a snapshot is included for each Viewing
window. These snapshots persist the state of the data visible in the Viewing windows.
If you have created other snapshots, they are not included in the packaged file
because they may reference parts that are not currently visible, which would result in a
reconcile problem for the e-mail recipient. However, you can include new snapshots
when editing an existing .vfz collaboration file.

Editing .vfz collaboration files

After you receive a .vfz collaboration file and review its contents in your visualization client, you can
edit the data from the file and then re-send it. Edits can consist of content such as markups, cross
sections, and groups. Because the scope of the data is limited, you also can include new snapshots
in the repackaged file. If you have the Standard, Professional, or Mockup service level, you can edit,
repackage, and re-send the data from existing collaboration files.
When you edit .vfz collaboration files, you cannot add new 2D or 3D documents to the session. This
invalidates the edits and disables the option for sending the file.

9-2 Getting Started with Product Visualization PLM00109 11.6

 E-mailing your work

Exemplo
You receive a collaboration file, which you open in your Viewer. The file consists of
a 3D model, a 2D image, markups, and a snapshot. After creating new markups,
performing measurements, and capturing new snapshots, you choose File→Send
Mail→Collaboration File. The data from the original .vfz file is repackaged to include your
edits and is attached to a new e-mail message, which you can send back to the person
who initially sent you the file or to someone else.

Create and send .vfz collaboration files

1. In the 3D Viewing window, display the content that you want to include in the session package,
such as parts, 3D markups, and groups.

Nota
Only visible parts are included in the collaboration file. Snapshots are not packaged in
new collaboration files because they may reference parts that are not currently visible,
which may result in a reconcile problem for the recipient of the file.

2. Adjust the options for the creation of .vfz collaboration files:

a. Choose File→Preferences→Collaboration.

b. On the Packaged Collaboration File Preferences dialog box, choose one of the following
options to package the session contents of the active Viewing window only or the contents of
all open Viewing windows:
• Active View

• All Views

c. From the 3D Content list, choose one of the following options to export your geometry as JT
files that consist of Ultra-Lightweight Precise (ULP) data only or JT files with full content:
• Lightweight

• Full

d. (Optional) Select the Enable password protection check box.

e. Click OK.

3. (Optional) Add attachments, such as Microsoft Office documents, to .vfz collaboration files:
a. Choose File→Attachments.

b. In the Attachments dialog box, click Add.

c. In the Choose attachment file location dialog box, choose the file you want to attach to
your work session or session package, and click Open.

PLM00109 11.6 Getting Started with Product Visualization 9-3

 Capítulo
Capítulo 9: 9:E-mailing
E-mailing
your your
workwork

Dica
To view the contents an attached file, select the file in the Attachments dialog
box and click Open.

4. Choose File→Send Mail→Collaboration File.

Your work session is packaged as a .vfz file and attached to a new e-mail message. If you
turned on password protection, a dialog box appears asking you to provide a password for
the file before it is created.

5. Send the e-mail message to your recipient.

Nota
(Windows only) To send e-mail messages from the Viewer through an MAPI e-mail program
like Microsoft Outlook, the Viewer and e-mail program must have the same bitness. If one
is 32-bit and the other is 64-bit, you get a warning message and the e-mail is not sent.

Open and view e-mailed .vfz collaboration files

When you receive an e-mail message containing a .vfz collaboration file, you can open and view the
worksession and any attachments.
1. Open the e-mail message.

2. Double-click the attached collaboration file.

The worksession opens in your Lifecycle Visualization viewer.

3. (Optional) To view any files attached to the session, do the following:

a. Choose File→Attachments.

b. Select the attached file and click Open.

Edit and re-send .vfz collaboration files

After receiving an e-mail message containing a .vfz collaboration file, you can open work session,
make changes and additions, and then e-mail a repackaged collaboration file.
1. Open the e-mail message.

2. Double-click the attached collaboration file.

The work session opens in your Lifecycle Visualization viewer.

3. Add content that you want included in the repackaged collaboration file, for example, 3D
markups, groups, or snapshots.

9-4 Getting Started with Product Visualization PLM00109 11.6

 E-mailing your work

Nota
When you edit a .vfz collaboration file, you cannot add new documents to the work
session; you can only edit documents included in the original file. A .vfz collaboration
file license is required to add new documents to an existing file.

4. When you are ready to re-send the updated work session, choose File→Send
Mail→Collaboration File.
The .vfz collaboration file is repackaged and attached to a new e-mail message.

5. Send the message to your recipient.

Nota
(Windows only) To send e-mail messages from the Viewer through an MAPI e-mail program
like Microsoft Outlook, the Viewer and e-mail program must have the same bitness. If one
is 32-bit and the other is 64-bit, you get a warning message and the e-mail is not sent.

Specify output preferences for .vfz collaboration files

1. Choose File→Preferences→Collaboration.

2. On the Packaged Collaboration File Preferences dialog box, do any of the following:

To Do this
Include only the contents of the active Viewing
Choose Active View.
window in the .vfz file.
Include the contents of all of the open Viewing
Click All Views.
windows in the .vfz file.
From the 3D Content list, choose Lightweight.

Nota
Export geometry as Ultra-Lightweight Precise
(ULP) JT data. The Lightweight option saves
geometry as ULP data only; no PMI
markups or B-Rep data is included
in the .vfz file.

Specify to include full content, including B-Rep

From the 3D Content list, choose Full.
data, PMI markups, and LOD information.

PLM00109 11.6 Getting Started with Product Visualization 9-5

 Capítulo
Capítulo 9: 9:E-mailing
E-mailing
your your
workwork

To Do this
Select the Enable password protection
check box.

Nota
Turn on password protection for .vfz files.
When you create a .vfz collaboration
file, a dialog box appears asking you
to provide a password for the file
before it is created.

Show the data that will be included in the .vfz Select the Review content before sending
file. check box.

3. Click OK.

9-6 Getting Started with Product Visualization PLM00109 11.6

Capítulo 10: Printing

Overview of printing
You can print your current view of a 2D image or 3D model. In addition to using standard printing
functionality, you can do the following:
• Preview before printing.

• Configure page headers and footers.

• Add watermark stamps.

• Add date and time stamps.

• Print using the HP Raster Transfer Language (RTL).

Preview images and models before printing

You can preview images and models to display each page as they will look when printed.

1. On the Printing toolbar, click Print Preview .

A preview of what will be printed appears in the Print Preview dialog box.

2. (Optional) In the Viewing window, manipulate the model or image.

Changes are displayed in the Print Preview dialog box.

3. (Optional) To change the printer configuration and options, click Setup.

4. (Optional) Click Print.

Your file is sent to your specified printer.

Print your current 2D or 3D view

You can preview and print images and models that are displayed in the Viewing window.
1. (Optional) Preview documents to display as they look when printed.

2. From the Printing toolbar, click Print .

3. In the Print dialog box, specify options in the following ways:

PLM00109 11.6 Getting Started with Product Visualization 10-1

 Capítulo
Capítulo 10:10: Printing
Printing

Choose this
On this tab Then do this
option
Select a printer to print the documents.

Dica
Click Properties to view and modify available
printer options.
Name

Dica
To print embedded Hewlett Packard Raster
Transfer Language images, you must select
an HPGL printer or plotter.

Select one of the following:

• To use the default print settings, click Print Defaults.

Default print • To use the print settings used the last time you
Print settings printed, click Last Used.

• To save the current print settings, click Save As, and

in the Save Settings dialog box, type a name for the
print settings, and click Save.
Select the names of open documents that you want to
print.

Dica
You can also choose Select None to clear
all selections, or Select All to select all
Open
documents.
Documents

If your document is multipaged, you can use the Page

command button to display the Page Selection dialog
box. Use the Print Range you can choose to print All
pages, to print a range of Pages, or to print the Current
page.

10-2 Getting Started with Product Visualization PLM00109 11.6

 Printing

Choose this
On this tab Then do this
option
Select one of the following page layouts:
• Portrait

• Landscape

Orientation • Best Fit

Nota
If you choose Best Fit, all pages print with
the same orientation.

Select one of the following print scale options:

• Fit to Page

• 1:1 scale

• Scale
Print Scale

Dica
Use the arrows to increase or decrease
the scale percentage, or type in a
Print Layout percentage.

Select one of the following:

• Roll Paper Auto Size
The system calculates the paper length needed to
fit the plot. For Mac and Linux, the only limitation
on page length is a hardware limitation (paper roll
size, memory limits, and so forth). For Windows, the
Roll Plotter limitation is the maximum length of a custom page,
which is 129 inches.

• (Windows only) Bypass Printer Driver

This option bypasses the Printer driver during the
printing process. The 129 inch limitation is removed,
but you may experience decreased image quality.

Nota
The Printer Language option is only available
Printer when you select Bypass Printer Driver from
Language Roll Plotter.

Select one of the following:

PLM00109 11.6 Getting Started with Product Visualization 10-3
 Capítulo
Capítulo 10:10: Printing
Printing

Choose this
On this tab Then do this
option

Language Issues
Postscript data is not
Postscript compressed, resulting in
larger data files.
HP-GL/2 None.
Prints 906/907 with
Calcomp
images.
Prints monochrome color
C4
only.
Prints monochrome color
MIL-R
only.
CGM None.
TIFF Prints color.
Do one of the following:
• Move the slider to improve the clarity or readability
of images previewed or printed.

• Print Image
Moving the slider to the right may improve the print
quality of some images.
Quality
• Preview Image
Moving the slider to the right may improve the
readability and clarity of some images.

Select Auto Calculate Print Quality to have the

software calculate a solid balance between printing
speed and quality for each print job.
Select the following:
• Select Print as Monocolor to print any image (color
Special Settings or grayscale) black and white.

• Select Print Full View to always print the entire

image even if you zoom in or out on the image.

10-4 Getting Started with Product Visualization PLM00109 11.6

 Printing

Choose this
On this tab Then do this
option
Image Specify where you want an image placed (printed) on
Alignment the page.
Margins Set page margins before printing.
Select or clear letting the software handle how the text
is sent to the printer.

Nota
This setting is useful when printing Vector
images that contain font style and font
Treat 2D Vector characteristics that are not supported by the
as Raster local computer.
If the Vector image includes a font style that
is not supported by the local computer, the
software tries to select a close approximation
of the font. This may result in text output that
is slightly off.

Select this setting to print dashed lines.

Advanced
2D Line Nota
Font Relative
Spacing The patterns of font lines are not a fixed size.
They are sized relative to the size of the
output.

Select Page Centric to set MDS position values to

absolute.

Exemplo
A starting point for copyright text is set to one
MDS File inch from the top left corner of the page.
Settings
The text will always be at this location
regardless of the size of the page.

Select Geometry Centric to scale the location and size

of the text with the rest of the image.

PLM00109 11.6 Getting Started with Product Visualization 10-5

 Capítulo
Capítulo 10:10: Printing
Printing

Choose this
On this tab Then do this
option
Don't print blank
Specify printing fewer pages in long flow charts.
pages
Specify printing a chart as a stand alone entity.

Single Flow Nota

FlowCharter
Chart
If links to other charts exist, a displayed icon
represents the link to these charts.

Linked Flow
Specify printing multiple-linked flow charts side-by-side.
Chart
To make the Header or Footer section available, select
one or both of them.
Font
Click Select Font, and then choose a font name, style,
size, and color.
Type the header text in the space provided.
• (Windows only) For additional header options,
right-click, point to Insert, and then choose one of
following:
o Date

Header o Time

o File

o Path and File

Header and
Footer
o UserID

o Page
Type the footer text in the space provided.
• To make the Header or Footer section available,
select one or both of them.

• (Windows only) For additional footer options,

right-click, point to Insert, and then choose one of
Footer following:
o Date

o Time

o File

10-6 Getting Started with Product Visualization PLM00109 11.6

 Printing

Choose this
On this tab Then do this
option

o Path and File

o UserID

o Page
Select Watermark to make these options available.
Choose Select Font to select a font name, style, size,
Font and color.
Select Auto Scale Font Size to automatically fit the text
to the available space.
Type the watermark text in the space provided.
• (Windows only) For additional watermark options,
right-click, point to Insert, and then choose one of
following:
o Date

o Time

o File
Watermark
o Path and File
Watermark
o UserID

o Page

Nota
If the administrator creates an MDS file, the
Watermark option is unavailable.

Choose the direction of the watermark text.

Nota
The button to the
left of Watermark Options include text that is displayed
text location diagonally, from lower left to upper right or
upper left to lower right, or horizontally in the
center of the page.

No further action is required.

Opaque

PLM00109 11.6 Getting Started with Product Visualization 10-7

 Capítulo
Capítulo 10:10: Printing
Printing

Choose this
On this tab Then do this
option

Nota
An opaque watermark can cover text and
graphics.

No further action is required.

Nota
Transparent
A transparent watermark lightly covers text
and graphics. About 50% of the covered data
displays on the printed document.

Check Background Color, and then select a color.

Nota
Background
• By default, Background Color is
Color
unchecked.

• By default, the background color is white.

4. Click Print.

Nota
• If your administrator created a Watermark stamp or Header and Footer, the Watermark
and the Header and Footer tabs are unavailable.

• The FlowCharter tab only appears if you are printing a Flowcharter file.

Watermark page example

The following graphic illustrates the result of using various options from the Watermark page.

10-8 Getting Started with Product Visualization PLM00109 11.6

 Printing

Working with Mac and Linux printers

Add a Mac or Linux printer

1. Choose File→Printer Setup.

2. In the Manage Printers dialog box, select Add Printer.

3. In the Printer Setup dialog box, type the following information in the designated areas:

In this box Type this

Name The name assigned to the printer.
The printer type, defined by one of the following:
• Postscript

• HPGL

Type • CalComp907

• CalComp951

• TIFF

• Raster

PLM00109 11.6 Getting Started with Product Visualization 10-9

 Capítulo
Capítulo 10:10: Printing
Printing

In this box Type this

The paper margin.
Margin
Select inches (in), centimeters (cm), or millimeters (mm).
Location (Optional) The location of the printer.
Comment (Optional) A description of the printer.

Configure a default Mac or Linux printer

1. Choose File→Printer Setup.

2. In the Manage Printers dialog box, select a printer from the list.

Delete a Mac or Linux printer

1. Choose File→Printer Setup.

2. In the Manage Printers dialog box, select a printer from the list.
The printer is removed.

Add Mac or Linux printer page sizes

Use Printer Setup options to configure one or more page sizes for each of your listed printers.
1. Choose File→Printer Setup.

2. In the Manage Printers dialog box, select a printer from the list.

3. Choose Add Pages.

4. In Page Size, select a size from the list.

5. (If you chose Custom) In Dimensions, enter the length by height, and then select inches
(in), centimeters (cm), or millimeters (mm).

6. Choose one of the following and take the specified action:

• Command, type the printer command.

• File, type the file name that receives the printed output.

7. Click OK.

Delete Mac or Linux printer page sizes

1. Choose File→Printer Setup.

2. In the Manage Printers dialog box, select a printer from the list.

3. Click Delete Page.

10-10 Getting Started with Product Visualization PLM00109 11.6

 Printing

4. In Page Size, select a size from the list.

5. Click OK.
The page is removed from the list.

Print HP Raster Transfer Language (RTL) embedded images

You can print Hewlett Packard © RTL embedded images to HP-GL printers and plotters. You can also
display selected embedded RTL images by exporting and saving the file for subsequent viewing.
1. Select a 2D image containing the Raster Transfer Language.

2. From the Printing toolbar, click Print .

3. In the Print dialog box, select an HPGL printer or plotter and click OK.
The file is sent to your printer.

Nota
• RTL is a subset of Hewlett Packard PCL (Print Command Language) and RTL is used
to embed true raster images (bitmaps) into plotter files.

• You can print HP RTL images in RGB color (color represented by 8-bits each of red,
green and blue), in indexed color (color represented by an 8-bit index that is stored
in a table of RGB colors), and in monochrome (color represented by a single bit –
black and white).

• HP RTL images are compressed, which significantly reduces file size.

• Scaled images and 8-bit color output are not supported at this time. Also, unsupported
commands are skipped, and the application continues to process files. The application
supports only those HP RTL commands and compression methods necessary for
output.

• Use Export Image to export and save the file. Later, you can open the file in the
Viewing window.

Creating text and watermark stamps using an MDS file

Overview of adding text and watermark stamps with an MDS file
As an administrator you can create an MDS stamp file to add a watermark and stamp text to all
printed images. You can specify a background color to the watermark, add headers and footers, and
modify the stamp further by using additional MDS commands. You write a text file that includes
your MDS stamp information and name it default.mds. Save this file in the \etc folder within the
installation directory.

PLM00109 11.6 Getting Started with Product Visualization 10-11

 Capítulo
Capítulo 10:10: Printing
Printing

Nota
You use the MetaDataStamp Template to control the formatting styles used in text
and watermark stamps. The default MDS_default_styles_template.mds template file
is located in the TC_DATA directory in the RAC; it is imported to the database as a
dataset called MDS_default_styles_template. For information on importing a custom
MDS_default_styles_template.mds template file, see the MetaDataStamp_template
preference.

Cuidado
When you create and save the default.mds file, end-user watermark preferences become
unavailable.

The watermark MDS command operates differently from other MDS stamp commands.
• Only one \Watermark command is supported in an MDS file. However, you can enter several
other basic MDS commands that create useful watermark stamps.

• The beginning position of the watermark text always defaults to the center of the page. However,
you can modify the beginning position of the watermark by using the \Pos option.

Nota
• Type each MDS command on a separate line.

• Basic text and watermarks stamps support the following replacement strings:
o %Date – date only

o %Time – time only

o %User – the user name

o %File – a file name; stamp.mds

o %FilePath – a path and file name; c:\etc\stamp.mds

o %Page – page number; 1 of 2

• Invalid or non-supported MDS commands are ignored.

Create text and watermark stamps using an MDS file

1. Open a text editor and type in options from the following list:

10-12 Getting Started with Product Visualization PLM00109 11.6

 Printing

Type this option To do this

Set the background color for text lines, including Watermarks.

Exemplo
\BackgroundColor(Red)
\BackgroundColor(255,0,0)

Nota
• Control the background color value in one of these ways:
o Enter a standard RGB value.

o Enter the exact name of one of the following

supported colors:
■ white

■ yellow

■ cornsilk

■ green
\BackgroundColor
(Color or RGB value)
■ cyan

■ sky blue

■ blue

■ midnight blue

■ purple

■ magenta

■ red

■ orange

■ salmon

■ gray80

■ slate

■ gray

PLM00109 11.6 Getting Started with Product Visualization 10-13

 Capítulo
Capítulo 10:10: Printing
Printing

Type this option To do this

■ black

• For text without a background color use

\BackgroundColor(None).

Set the font size for text.

\Char(size) Exemplo
\Char(12)

Set the color for text.

\Color(color) Exemplo
\Color(Red)

\Date Display the system date and time.

\File Display the document path and file name.
Set the font.

\Font(name) Exemplo
\Font(Courier)

Enter text that is displayed at the bottom of the page.

\FooterLeft
Exemplo
\FooterCenter
\FooterRight \FooterCenter
Confidential

Set the halftone to opaque (a value of 1.0) or to transparent (a value

of 0.5).

\Halftone(1.0 or 0.5)
Exemplo
\Halftone(0.5)

Enter text that is displayed at the top of the page.

\HeaderLeft
Exemplo
\HeaderCenter
\HeaderRight \HeaderCenter
Confidential

\Pos(x,y) Set the beginning cursor position. The default cursor position is (36,36).

10-14 Getting Started with Product Visualization PLM00109 11.6

 Printing

Type this option To do this

Set the rotation angle of your text.

Exemplo
\Rotate(angle)
\Rotate(45)
\Rotate(-45)

\User Display the current user ID.

Specify the watermark command on one line in the MDS file. The next
line of text includes your watermark message.

Nota
• The Orientation parameter supports the following values
o (LL2UR) – lower left to upper right

o (UL2LR) – upper left to lower right

o (HORIZ) – horizontal
\Watermark
If you do not specify a value, the default, HORIZ, is used.

• You can use the value AUTO to set watermark text to be

as large as possible. If AUTO is not specified, text size
is determined by the last value in \Char, or to the default
value, \Char(12).

Exemplo
\Watermark(HORIZ,AUTO)
Sample Text

2. Name the MDS file, default.mds, and save it to the etc folder within your installation directory.
All printed images will now contain the watermark defined by the MDS file.

MDS text and watermark examples

An example using the \Halftone MDS command
\Color(Black)
\Font(Arial)
\Char(16)
\Pos(20,20)
\Halftone(0.5)
\BackgroundColor(Red)
Sample Text

PLM00109 11.6 Getting Started with Product Visualization 10-15

 Capítulo
Capítulo 10:10: Printing
Printing

\BackgroundColor(None)
Line of sample text.
\BackgroundColor(Purple)
\Char(36)
\Watermark(HORIZ)
6.0 Demo

An example without using the \Halftone MDS command

\Color(Black)
\Font(Arial)
\Char(16)
\Pos(-20,20)
\BackgroundColor(Red)
Sample Text
\BackgroundColor(None)
Line of sample text.
\BackgroundColor(Purple)
\Char(36)
\Watermark(HORIZ)
6.0 Demo

10-16 Getting Started with Product Visualization PLM00109 11.6

 Printing

Set the beginning cursor position for stamps with MDS files
If you create additional detailed stamps for your files by using MDS stamps, use the MDS command
/Pos(x,y) to specify the beginning cursor position of the stamp. The numeric values, x and y are
measured in point-size, where one point is equal to 1/72 of an inch.
The default starting position for all MDS text entries is the upper-left corner of the page, or a position
equal to /Pos(36,36). This means the cursor begins at a point that is 1/2 inch from the top of the
page and 1/2 inch from the left edge of the page.
You can use these additional cursor position options, as needed:

Use this
To do this
option
Position the stamp outside the stamped image and into the margin. This position
= indicator is only available for HPGL-based stamping and cannot be used with the !
position indicator. This may only be used for the vertical position.
Measure the position in point sizes (1/72 of an inch or approximately 0.35
! millimeters). Without the symbol (!), the current operating coordinate system
determines the units of measure.
Begin the cursor at the lower right-hand corner of the image. Without the symbol (–),
–
the position is measured from the upper left-hand corner.

Nota
Allow enough space for the character size in the y direction to avoid truncating (cropping)
the stamp.

PLM00109 11.6 Getting Started with Product Visualization 10-17

 Capítulo
Capítulo 10:10: Printing
Printing

Exemplo
This example shows how to position the cursor 3 inches up from the bottom and 2 inches
from the right-hand edge of the page.
\pos(!-144,!-216)

Specify the orientation of text stamps with MDS files

1. Use the MDS Rotate command to specify how your stamp displayed on the page.

2. Use positive rotation values to rotate text counter-clockwise. The zero angle (or start) is the point
of intersection on the right side of a horizontal line crossing through the center of rotation. The
center of rotation is the midpoint of the height and the midpoint of the width before rotation.

Exemplo

Type this To do this

Rotate the text 45 degrees counter-clockwise.
\Rotate(45) The text flows from the starting position on a lower left corner to
the upper right corner angle.
Rotate the text 90 degrees counter-clockwise.
\Rotate(90) The text flows from the starting position straight up the page on a
perpendicular angle.

10-18 Getting Started with Product Visualization PLM00109 11.6

 Printing

Rotate the text 90 degrees clockwise.

\Rotate(-90) The text flows from the starting position straight down the page
on a perpendicular angle.

Dica
• The angle value must be an integer.

• To prevent truncated or cropped text, be mindful of your text starting point, font size,
and rotation angle.

Add uniform watermark stamps when exporting files

As an administrator you can create an MDS stamp file to add a watermark and stamp text to all 2D
images created using Export Image. You write a text file that includes your MDS stamp information
and name it export.mds. Save this file in the \etc folder within the installation directory.You can
also set a background color to the watermark and modify the stamp further by using additional
MDS commands.

Cuidado
When you create and save the export.mds file, end-user watermark preferences become
unavailable.

Nota
• Type each MDS command on a separate line.

• Invalid or non-supported MDS commands are ignored.

• Only one \watermark command is supported in an MDX file.

• The beginning position of the watermark text always defaults to the center of the page.
However, you can modify the beginning position of the watermark by using the \Pos
option.

• Watermark stamps support the following replacement strings:

o %Date – date only

o %Time – time only

o %User – the user name

o %File – a file name; stamp.mds

o %FilePath – a path and file name; c:\etc\stamp.mds

PLM00109 11.6 Getting Started with Product Visualization 10-19

 Capítulo
Capítulo 10:10: Printing
Printing

o %Page – page number; 1 of 2

1. Open a new file in a text editor.

2. Select from the following:

Type this option To do this
Set the background color for text lines, including Watermarks.

Exemplo
\BackgroundColor(Red)
\BackgroundColor(255,0,0)

Nota
• Control the background color value in one of these
ways:
o Enter a standard RGB value.

o Enter the exact name of one of the following

supported colors:
■ white

\BackgroundColor (Color or ■ yellow

RGB value)
■ cornsilk

■ green

■ cyan

■ sky blue

■ blue

■ midnight blue

■ purple

■ magenta

■ red

■ orange

10-20 Getting Started with Product Visualization PLM00109 11.6

 Printing

Type this option To do this

■ salmon

■ gray80

■ slate

■ gray

■ black

• For text without a background color use

\BackgroundColor(None).

Set the font size for text.

\Char(size) Exemplo
\Char(12)

Set the color for text.

\Color(color) Exemplo
\Color(Red)

\Date Display the system date and time.

\File Display the document path and file name.
Set the font.

\Font(name) Exemplo
\Font(Courier)

Set the halftone to opaque (a value of 1.0) or to transparent (a

value of 0.5).

\Halftone(1.0 or 0.5)
Exemplo
\Halftone(0.5)

Set the beginning cursor position. The default cursor position is

\Pos(x,y)
(36,36).

PLM00109 11.6 Getting Started with Product Visualization 10-21

 Capítulo
Capítulo 10:10: Printing
Printing

Type this option To do this

Set the rotation angle of your text.

Exemplo
\Rotate(angle)
\Rotate(45)
\Rotate(-45)

\User Display the current user ID.

Specify the watermark command on one line in the MDS file. The
next line of text includes your watermark message.

Nota
• The Orientation parameter supports the following
values
o (LL2UR) – lower left to upper right

o (UL2LR) – upper left to lower right

o (HORIZ) – horizontal
\Watermark
If you do not specify a value, the default, HORIZ,
is used.

• You can use the value AUTO to set watermark text

to be as large as possible. If AUTO is not specified,
text size is determined by the last value in \Char, or
to the default value, \Char(12).

Exemplo
\Watermark(HORIZ,AUTO)
Sample Text

3. Name the file, export.mds, and save it to the etc folder within your installation directory.
All images saved using Export Image are saved with the uniform watermark stamp.

10-22 Getting Started with Product Visualization PLM00109 11.6

 Printing

Exemplo
This example shows the text of a watermark stamp that is embedded on all images saved
by Export Image.
\Color(0,255,0)
\Font(Arial)
\Char(18)
\BackgroundColor(white)
\Watermark(UL2LR)
%File: Restricted Document %Time

Printing a date and time

Overview of printing a date and time
When printing, you can add a date and time to headers, footers, watermarks, and MDS stamps.
The syntax for these options includes the following:

To print Type this

Today’s date %Date
Tomorrow’s date %Date(1)
Yesterday’s date %Date(-1)
30 days in the future %Date(30)
The current time %Time
The current time plus 30 minutes %Time(30)
The current time plus 2 hours %Time(120)

Nota
• Days and times in the future are positive; to set them to the past, use negative numbers.

• The date option limit is 5000 days in the future or in the past. The time option limit is
1500 minutes in the future or in the past.

Add a date and time to headers and footers

Nota
The following steps are for Windows systems. For Mac and Linux, right-click is not
supported. You type specific tokens (for example, %Date) into the appropriate field.

1. Choose File→Print.

2. In the Print dialog box, click the Header and Footer tab.

PLM00109 11.6 Getting Started with Product Visualization 10-23

 Capítulo
Capítulo 10:10: Printing
Printing

3. Select the Header check box, the Footer check box, or both and then select the location of the
text (left, center, or right).

4. To add a date, right-click in the selected location and choose Insert→Date.

To add a time, right-click in the selected location and choose Insert→Time.

5. Add the necessary text and date information for the header or footer.
In this example, the text used is Expires on %Date(30).

The image is printed with the header text in the top left corner of the page. A specific date is
printed 30 days from the date of printing the file.

Add a date and time to a watermark

1. Choose File→Print.

2. In the Print dialog box, click the Watermark tab.

3. Select the Watermark check box.

4. To add a date, right-click in the text box and choose Insert→Date.

To add a time, right-click in the text box and choose Insert→Time.

5. (Optional) Create the text and then insert the variables or insert the variables and create text
around them.

10-24 Getting Started with Product Visualization PLM00109 11.6

 Printing

In this example, the watermark text is Expires on %Date(30) at %Time.

Add a date and time using an MDS file

When an MDS stamp is used to print files, watermark options are unavailable and the text associated
with the MDS file is used in all print jobs. For these reasons, usually an administrator creates the
MDS file.
1. Open a text editor and save the file as default.mds.

2. Add the replacement strings, %Date, %Time, or both as appropriate.

Use the syntax as described before.

3. Add additional MDS commands, as needed.

4. Save the file, default.mds in the \etc folder.

Nota
Type each MDS command on a separate line.

For complete details about MDS stamp files, see Creating text and watermark stamps using an
MDS file.

System administrator reference for configuring default Windows

print preferences
Overview of system administrator reference for configuring default Windows
print preferences
As system administrator, you can modify the default print settings for Windows operating systems.
When the print dialog box appears, you can do the following:
• Run the print job. This action prints the job using the original default values.

• Modify the default settings temporarily by changing their values. For example, change the print
orientation from portrait (the default setting) to landscape for this specific print job.

PLM00109 11.6 Getting Started with Product Visualization 10-25

 Capítulo
Capítulo 10:10: Printing
Printing

Nota
The print default settings appear the next time you request a print job, unless you
select Last Used Print dialog box. Use Last Used to repeat a temporary change in
default setting options. For example, if you change print orientation from portrait to
landscape the Print Default setting generates a portrait print job and the Last Used
settings prints landscape.

• Modify the default settings permanently.

How to change default print settings for Windows systems

1. Navigate to Initialization.xml, which is saved in the /etc subfolder of the Teamcenter lifecycle
visualization installation directory.

Exemplo
C:\Program Files\Siemens\Teamcenter<release_version>\Visualization\etc

2. Use a text editor to open, review, and change the values associated with this XML file. Once
the changes are made, save the modified Initialization.xml.

Dica
For each section that you configure, be sure to configure the OverWrite preference to
“Yes” if the current value is set to “No”.

Here is sample section of an Initialization.xml that shows default print options and their values.

<Section_Printing>
<!-- OverwriteDefaults: yes to set defaults each time app start, no to set defaul
if value not set yes is recommended -->
<OverwriteDefaults state="no" />

<PrintOptions>
<NumCopies value="1"/>
<!-- Collate: "yes" "no" -->
<Collate state="no"/>
<!-- FullPathNameFlag: "yes" "no" -->
<FullPathNameFlag state="no"/>
<!-- PrintToFile: "yes" "no" -->
<PrintToFile state="no"/>
</PrintOptions>

10-26 Getting Started with Product Visualization PLM00109 11.6

 Printing

<PrintLayout>
<!-- Orientation: 0=Portrait 1=Landscape 2=Best Fit -->
<Orientation value="0"/>
<!-- PrintScale: 0=Fit to Page 1=1:1 Scale 2=Scale -->
<PrintScale value="0"/>
<!-- ScalePercentage: 1-100 -->
<ScalePercentage value="100"/>
<!-- RollPaperAutoSize: "yes" "no" -->
<RollPaperAutoSize state="no"/>
<!-- BypassPrinterDriver: "yes" "no" -->
<BypassPrinterDriver state="no"/>
<!-- PrinterLanguage: 0=Post Script 1=HPGL 2=TIFF 3=C4 4=MILR -->
<PrinterLanguage value="0"/>
<!-- PrintQuality: 0.0 - 100.0 -->
<PrintQuality value="0.0"/>
<!-- PreviewQuality: 0.0 - 100.0 -->
<PreviewQuality value="0.0"/>
<!-- AutoCalcPrintQuality: "yes" "no" -->
<AutoCalcPrintQuality state="yes"/>
<!-- PrintAsMonocolor: "yes" "no" -->
<PrintAsMonocolor state="no"/>
<!-- PrintFullView: "yes" "no" -->
<PrintFullView state="no"/>
</PrintLayout>
<Advanced>
<!-- ImageAlignment: 0 to 8 -->
<ImageAlignment value="4"/>
<!-- UseWYSIWYG: "yes" "no" -->
<UseWYSIWYG state="yes"/>
<LeftMargin value="0"/>
<RightMargin value="0"/>
<TopMargin value="0"/>
<BottomMargin value="0"/>
<!-- MarginUnits: 0=Inches 1=Millimeters -->
<MarginUnits value="0"/>
<!-- TreatVectorAsRaster: "yes" "no" -->
<TreatVectorAsRaster state="no"/>
<!-- RelativeLineFonts: "yes" "no" -->
<RelativeLineFonts state="no"/>
<!-- MDSIsGeoCentric: no=Page Centric yes=Geometry Centric -->
<MDSIsGeoCentric state="no"/>
</Advanced>
</Section_Printing>

PLM00109 11.6 Getting Started with Product Visualization 10-27

Capítulo 11: Specifying preferences

Migrate user preferences when moving to a new version

If you saved user preferences, such as color and font preferences, in a previous version of the
product, you can migrate them for use with an updated version.

If settings from a previous version are detected, the Migrate Preferences dialog box appears when
you first start the product.

1. In the Migrate Preferences dialog box, click Yes or No.

Nota
If you want to stop the dialog box from appearing each time you start the application,
select the Do Not Ask Again check box. If you choose both No and Do Not Ask
Again, migrating your preference settings to your current version is no longer possible.

2. Click OK.

Setting higher security (FIPS)

Overview of setting higher security (FIPS)

You may need to set higher security standards when you work with government entities and other
similar organizations. The National Institute of Standards and Technology (NIST) developed Federal
Information Processing Standards (FIPS) for use government-wide. These standards relate to such
security features as the size of a public key, the strength of a cipher, and the way information must
be sent between computers.

Activate FIPS security standards

If your organization uses FIPS security standards, you must enable FIPS mode for the heightened
security to take effect in the application.

1. (Windows only) Use Microsoft guidelines to configure your computer to run in FIPS mode.

2. Choose File→Preferences→Use FIPS.

-or-
Set the TCCRYPTO_FORCE_FIPS_MODE environment variable to True.

PLM00109 11.6 Getting Started with Product Visualization 11-1

 Capítulo
Capítulo 11:11: Specifying
Specifying preferences
preferences

Nota
If the variable is set to true, the menu option Use FIPS will be unavailable. You will
be unable to turn FIPS on or off because your computer will always be configured
FIPS mode.

3. Configure your browser to run in FIPS mode.

Nota
(Windows only) By default, if your computer is in FIPS mode, Internet Explorer is
automatically set to run in FIPS mode.

Teamcenter Integration preferences

Overview of Teamcenter Integration preferences

Use the Teamcenter Integration Preferences to specify the default behavior of visualization
datasets in Lifecycle Visualization. In the stand-alone viewer or the Lifecycle Viewer, choose
File→Preferences→Teamcenter Integration to adjust any of the following preferences:

These preferences Do this

Specify the unit of measurement for PLM XML and Parasolid files loaded
Teamcenter Integration
from Teamcenter. Also specify how to load 3D documents containing both
3D Loader preferences
static and configured product structure.
Teamcenter Integration
Control the default save location for session files.
Session preferences
Teamcenter Integration Control how new markups are named and whether or not to display
Markup preferences messages during batch modifications.
Teamcenter Integration
Specify the default behavior when attempting to load checked out objects.
Check Out preferences
Teamcenter Integration Control the display of Teamcenter and NX attributes present in visualization
Attributes preferences datasets.
Teamcenter Integration
Control how 2D snapshots and 3D product views are saved to Teamcenter.
Snapshot preferences
Teamcenter Integration
Visual Issue Specify the default behavior for visual issue creation.
preferences
Teamcenter Integration Specify how to save 3D documents with both configured and static product
3D Save preferences structure.

11-2 Getting Started with Product Visualization PLM00109 11.6

 Specifying preferences

Teamcenter Integration 3D Loader preferences

Use the Teamcenter integration 3D loader preferences to specify the unit of length for product
structure data sent as a new document to the Lifecycle Viewer or stand-alone application viewer. You
can also specify how to load 3D documents containing both static and configured structure.
1. Choose File→Preferences→Teamcenter Integration.

2. Click the 3D Loader tab.

3. In the Document Units section, from the Document Units list, select a unit of measurement.

Nota
• The default unit of length for product structure data sent to the Lifecycle Viewer or
the stand-alone application viewer is meters.

• Changes to the Document Units preference do not apply to documents that

are open in the session. After modifying the preference, close and reopen your
documents for the change to take effect.

• The Document Units preference is not applicable for structure that is inserted
or merged into an existing document.

• The Document Units preference has no effect on static structure that is opened
in the Lifecycle Viewer or the stand-alone application viewer. The document unit
of length for static data is specified using the PLMXML units setting in PLMXML
Preferences.

4. In the Product Structure section, choose one of the following:

To Do this
Open configured structure according to its Click Configure an updated structure.
current state in Teamcenter. The most recent
structure configuration is loaded.
For 4GD subsets, replay the subset recipe a. Click Configure an updated structure.
before opening the data.
b. From the Update subset on load list,
select one of the following:
• No Update

• Replay Recipe
When both configured and static product Click Load static structure (structure at time
structure are available, open the structure of session save).
according to its state at the time the session
was saved.
When both configured and static product Click Ask at load time.
structure are available, choose how to load the
structure when you attempt to open it.

PLM00109 11.6 Getting Started with Product Visualization 11-3

 Capítulo
Capítulo 11:11: Specifying
Specifying preferences
preferences

5. In the Partitions section, select the Show empty partitions check box if, when viewing partition
hierarchies in the assembly tree, you want to show partitions that have no design element
members. When this option is not selected, empty partitions do not appear.

Teamcenter Integration Session preferences

Use the Teamcenter Integration Session preferences to control how sessions are saved.
1. Choose File→Preferences→Teamcenter Integration.

2. Click the Session tab.

3. In the Default Storage Location section, do any of the following:

To Do this
Save session files with the base document. Click Attach to base document.
Save session files in a new location. Click Alternate location.

Teamcenter Integration Markup preferences

Use the Teamcenter Integration Markup preferences to control how new markups are named and to
display messages during batch modifications.

Nota
The Teamcenter site preference TC_Generate_Markup_Name determines whether
dataset names are hard-coded or generated. This controls the markup name only in
Teamcenter. In standalone Lifecycle Visualization, the generated markup name is always
used.

1. Choose File→Preferences→Teamcenter Integration.

2. Click the Markup tab.

3. In the General section, do any of the following:

To Do this
Name new markup datasets as you create Select the Show New Dataset selection
them dialog check box.
Display warning messages during batch Select the Show warnings during batch
operations modifications check box.
Display errors that occur during batch Select the Show partial errors during batch
operations modifications check box.

Teamcenter Integration Check Out preferences

Use the Teamcenter Integration Check Out Preferences to specify the default behavior when
attempting to load checked out objects.
1. Choose File→Preferences→Teamcenter Integration.

11-4 Getting Started with Product Visualization PLM00109 11.6

 Specifying preferences

2. Click the Check Out tab.

3. In the Document Checked Out By section, do any of the following:

To specify how to load documents Do this

When the documents are checked out by In the Different user section, choose from the
someone else following options
• Load in read only mode

• Cancel load

• Show warnings
When you have opened the documents in In the Same User / Different Application
another application section, choose from the following options
• Load in read only mode

• Break lock and check out

• Cancel load

• Show warnings
When you have already opened the documents In the Same User / Same Application section,
in the viewer choose from the following options
• Load in read only mode

• Cancel load

• Show warnings

Teamcenter Integration Attributes preferences

Use the Teamcenter Integration Attributes Preferences to control the display of Teamcenter and
NX attributes present in visualization datasets.

Nota
This preference is applicable for assemblies only. It has no effect on individual JT datasets.

1. Choose File→Preferences→Teamcenter Integration.

2. Click the Attributes tab.

3. In the Teamcenter Attributes tab, select the attributes that you want to display.

PLM00109 11.6 Getting Started with Product Visualization 11-5

 Capítulo
Capítulo 11:11: Specifying
Specifying preferences
preferences

Dica
To select multiple adjacent attributes, click the first attribute, press Shift, and then
click the last attribute. To select multiple nonadjacent attributes, hold Ctrl as you click
each item.

4. Click Add.
The selected attributes move to the Displayed Attributes section.

5. (Optional) Select the Use Display Names check box.

The attributes are shown using display names if your database administrator defined them.

6. Close and restart the application.

Nota
• You can also set the attributes to display within Teamcenter. Choose
Edit→Options→Index, and then search for Interop_Vis_Attributes.

• To display attributes that are longer than a single line, your system administrator must
have grouped them into a single, multiline attribute.

Teamcenter Integration Snapshot preferences

Use the Teamcenter Integration Snapshot Preferences to control how 2D and 3D snapshots are
saved to Teamcenter.
1. Choose File→Preferences→Teamcenter Integration.

2. Click the Snapshot tab.

3. In the 2D Snapshot section, do any of the following:

To Do this
Enter form data on 2D Select the Show attributes form on save check box.
snapshots
Nota
You can enter data for any custom form fields. Revision and
Page information is entered automatically.

Save a 2D geometry a. Select the Capture 2D geometry asset check box.

asset
b. (Optional) Adjust the Geometry asset image quality slider.
Adjust the 2D Use the slider bar to make adjustments in a range from Good, Better,
geometry asset image or Best.
quality

11-6 Getting Started with Product Visualization PLM00109 11.6

 Specifying preferences

4. In the Teamcenter Product View section, do any of the following:

To Do this
Add or update 3D a. Select the Add or Update 3D Geometry Asset check box.
geometry asset for
product views b. (Optional) Select the Draw Outline check box to generate an
outline of the 3D geometry asset.

Nota
If you do not see the Add or Update 3D Geometry
Asset check box, contact your administrator.

Create an image a. Select the Image Capture check box.

capture of the product
view b. (Optional) Select the Use image export dialog check box to
display the Export Image dialog box when you save the product
view. If this option is cleared, the application uses Teamcenter
preferences to control such image capture options as size, file
type, and resolution.

Nota
If you do not see the Image Capture check box, contact
your administrator.

Rename the product a. Select the Show Snapshot Name Dialog check box to display the
view before saving it New Teamcenter Product View Dataset dialog box.

b. In the New Teamcenter Product View Dataset dialog box, type a

new name for the product view.

Nota
• Use 3D Product View preferences to modify how Teamcenter product views are
processed.

• The 3D Product View preferences are unavailable in the following conditions:

o When you do not send Teamcenter data to Lifecycle Viewer. That is, you must
have an active connection to a Teamcenter server.

o When the Teamcenter protection scope of the preferences is higher than your
permission scope. For example, if your administrator set the preference protection
scope to SITE, and your protection scope is set to USER, the 3D Product View
options are unavailable.

PLM00109 11.6 Getting Started with Product Visualization 11-7

 Capítulo
Capítulo 11:11: Specifying
Specifying preferences
preferences

• If you have permissions, when you change a product view preference in Lifecycle
Viewer you also change the corresponding Teamcenter preference on the server.

Teamcenter Integration Visual Issue preferences

Use the Teamcenter Integration Visual Issue Preferences to control the default behavior of visual
issue creation.
1. Choose File→Preferences→Teamcenter Integration.

2. Click the Visual Issue tab,

3. Do any of the following:

To Do this
Specify a visual report template From the Issue Type list, select a template.

Nota
Issue Report is the default issue
type. Your organization may also
allow you to choose from additional
issue types.

Specify the issue relation to use for snapshots In the Issue Relation for Snapshots section,
choose one of the following:
• Snapshot Before Fix

• Snapshot After Fix

Specify the data type attached to the visual From the Data Type list, select one of the
issue following:
• Product View or 2D Snapshot

• Session File
Enter options for visual issue creation each Select the Ask at the time the Issue is
time an issue is created created check box.

Teamcenter Integration 3D Save preferences

Use the Teamcenter Integration 3D Save Preferences to specify how to save 3D documents that
contain both configured and static product structure.
1. Choose File→Preferences→Teamcenter Integration.

2. Click the 3D Save tab.

3. In the Product Structure section, do any of the following:

11-8 Getting Started with Product Visualization PLM00109 11.6

 Specifying preferences

To Do this
Specify to save configured structure only Select Save only configured structure.
Specify to save both configured and static Select Save configured and static
representations of the current structure representations of the current structure.

PLM00109 11.6 Getting Started with Product Visualization 11-9

Siemens Industry Software

Europe
Stephenson House
Sir William Siemens Square
Sedes da empresa Frimley, Camberley
Granite Park One Surrey, GU16 8QD
5800 Granite Parkway +44 (0) 1276 413200
Suite 600
Plano, TX 75024 Asia-Pacific
USA Suites 4301-4302, 43/F
+1 972 987 3000 AIA Kowloon Tower, Landmark East
100 How Ming Street
Américas Kwun Tong, Kowloon
Granite Park One Hong Kong
5800 Granite Parkway +852 2230 3308
Suite 600
Plano, TX 75024 Brasil
USA Avenida Goiás, 1320
+1 314 264 8499 São Caetano do Sul – SP
09521-300
+55 11 4224 7155
Fax +55 11 4224 7107

Sobre a Siemens PLM Software

© 2019 Siemens Product Lifecycle Management
A Siemens PLM Software, uma unidade de negócios Software Inc. Todos os direitos reservados. Siemens
da Siemens Industry Automation Division, é líder e o logotipo da Siemens são marcas comerciais
em fornecimento global de serviços e software de registradas da Siemens AG. D-Cubed, Femap, Geolus,
gerenciamento de ciclo de vida de produtos (PLM), com GO PLM, I-deas, Insight, JT, NX, Parasolid, Solid
sete milhões de usuários licenciados e mais de 71.000 Edge, Teamcenter, Tecnomatix e Velocity Series são
clientes no mundo todo. Com sede em Plano, no Texas, a marcas comerciais ou marcas comerciais registradas
Siemens PLM Software trabalha de forma colaborativa com da Siemens Product Lifecycle Management Software
empresas para fornecer soluções abertas que as auxiliem a Inc. ou suas subsidiárias nos Estados Unidos e em
transformar mais ideias em produtos bem-sucedidos. Para outros países. Todos os outros logotipos, marcas
obter mais informações sobre os produtos e serviços da comerciais, marcas comerciais registradas ou marcas
Siemens PLM Software, visite www.siemens.com/plm. de serviço mencionados neste documento pertencem
aos seus respectivos proprietários.