Scribd Logo
Upload

Welcome to Scribd!

  • 140 views

    GK 3167 Serti̇fi̇ka

    Uploaded by

    nedim cılız
    This document is a mill test certificate for steel products. It provides the mechanical properties, chemical analysis, and confirms that the products meet the specified quality standards. The products tested were steel square hollow sections 30x30x1.5mm in size and 6 meters in length. Both products met the mechanical property requirements for the S235JRH quality standard according to EN 10219-1:2006 and passed dimensional control, hardness, and bend tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    GK 3167 Serti̇fi̇ka

    Uploaded by

    nedim cılız
    140 views1 page
    This document is a mill test certificate for steel products. It provides the mechanical properties, chemical analysis, and confirms that the products meet the specified quality standards. The products tested were steel square hollow sections 30x30x1.5mm in size and 6 meters in length. Both products met the mechanical property requirements for the S235JRH quality standard according to EN 10219-1:2006 and passed dimensional control, hardness, and bend tests.

    Original Title

    GK 3167 SERTİFİKA

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a mill test certificate for steel products. It provides the mechanical properties, chemical analysis, and confirms that the products meet the specified quality standards. The products tested were steel square hollow sections 30x30x1.5mm in size and 6 meters in length. Both products met the mechanical property requirements for the S235JRH quality standard according to EN 10219-1:2006 and passed dimensional control, hardness, and bend tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    140 views1 page

    GK 3167 Serti̇fi̇ka

    Uploaded by

    nedim cılız
    This document is a mill test certificate for steel products. It provides the mechanical properties, chemical analysis, and confirms that the products meet the specified quality standards. The products tested were steel square hollow sections 30x30x1.5mm in size and 6 meters in length. Both products met the mechanical property requirements for the S235JRH quality standard according to EN 10219-1:2006 and passed dimensional control, hardness, and bend tests.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    MILL’S TEST CERTIFICATE

    ( ACC. TO EN 10204 / 3.1 )


    Yücel Boru ve Profil Endüstrisi A.Ş.
    Customer CEVHER METAL DEMİR SAN.VE TİC. Order 15368082 Date 12.03.2019
    Sending 0080757896 Report 01246697 Page 1/1
    INSPECTION AND TEST RESULTS

    MECHANICAL PROPERTIES / CHEMICAL ANALYSIS

    Size & Thick Length Bundle Product Quality Tensile Yield Elong Impact C Si Mn P S Ni Cr Mo V Cu Al Ti Nb N Ceq NDT Type Flat. Bend Coat. Heat Dimension Control
    (mm) (m) Ref.No. Strength Strength (%) Energy % % % % % % % % % % % % % % % Test Number Standard
    (N/mm2) (N/mm2) (Joule)
    30x30x1.5 6 4219004120 SHS S235JRH 447 389 22 - 0,050 0,008 0,180 0,011 0,016 0,130 0,070 0,018 0,002 0,370 0,028 0,001 0,002 0,007 0,131 OK HR - - - 911604B01 TS EN 10219-1:2006
    30x30x1.5 6 4219004121 SHS S235JRH 440 394 27 - 0,048 0,013 0,176 0,013 0,010 0,130 0,066 0,020 0,002 0,435 0,028 0,001 0,001 0,007 0,133 OK HR - - - 931566B03 TS EN 10219-1:2006

    PREPARED by CONFIRMED by

    OP4.F16 / 06.02.2013

    You might also like