Technical-Data-Book-For Commercial Tyres PDF
Technical-Data-Book-For Commercial Tyres PDF
Technical-Data-Book-For Commercial Tyres PDF
General hints
Our concept for your lowest Contents
overall driving costs
We know that cost efficiency is the key. And this is precisely why Continental Truck Tyres pay in the General hints
long-term, as their performance benefits extend beyond a tyre’s normal lifespan to be repeated again Safety remarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
and again, thanks to the ContiLifeCycle. Operating instructions (EU Reg. 458/2011 and UN Reg. 54). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Tyre designations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Vehicle Tyres
Commercial
The durability of Continental Truck Tyres begins with the new tyre and is considerably extended by Units of measurement and definitions (DIN 70020).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
options including professional regrooving, intelligent casing management (ContiCasingManagement) Sidewall designations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
and our premium retread. The mutually harmonised components of the ContiLifeCycle make a con Load capacities for various maximum design speeds.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
siderable contribution to the reduction of tyre costs and thus achieving the lowest overall driving costs. Air pressure multiplier for increased load capacity
due to maximum design speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Load capacities of tyres in special cases (EU Reg. 458/2011).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
New tyres Truck chassis with crane superstructure (mobile crane).. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Bus tyre fitment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Wheels and rims.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Vehicle Tyres
Commercial
m ent Customer Segments Goods | People | Construction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Tread pattern overview Goods | People | Construction.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
M + S and Three Peak Mountain Snow Flake (3PMSF) Designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Retr
ContiLifeCycle™
age
an
Regrooving recommendations.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
ng
di
Vehicle Tyres
Commercial
Maintenance and care. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Maintenance
and care
retreadable and regroovable, and best casing asset management and premium quality solution
a key cornerstone for the lowest through professional tools such to prolong the life of your
overall driving costs. as ContiCasingBank. Continental tyres.
Technical Data Book General hints 4 5
General hints
Safety remarks Operating instructions
(EU 6) Reg. 458/2011 and UN 5) Reg. 54
The extensive technical data and other information The data provided in this guide is based on ave Load capacity and speed Free Rolling Tyres (FRT)
relating to tyres and accessories on the following rage operating conditions as normally found in When determining the minimum tyre size necessary Trailer tyres marked as Free Rolling Tyres (FRT)
pages have been compiled to reflect as accurately central Europe. for the axle of a vehicle, the authorised weight and are tyres specifically designed for the equipment
and completely as possible the current state of the maximum design speed of the vehicle should of trailers (non driven/ trailing axles). This is the
Please contact us with respect to operating condi-
development. always be used as a basis. Trailers first coming into axle position where they will deliver their best
tions differing from the above, e.g. for uses outside
service on or after January 1, 1990 must be equipped performance.
If this “Technical Data Book” is to be used as a Central Europe.
with tyres suited for maximum speeds of at least
basis for particularly important decisions, further Mixed fitment
The tyre sizes given in this guide are not always 100 km/h, unless the trailer is clearly marked for
data covering relevant standards such as ETRTO 1 ), (radial/crossply) While it is permissible for a vehicle
identical to the ones available in the size range. a lower speed. The so-called “tolerance catalogue”
DIN 2 ) and WdK 3 ) can also be used. Special infor- weighing more than 2.8 t to be fitted axlewise with
must also be taken into consideration here. Nomi-
mation can, of course, also be obtained from us Lower inflation pressure, greater loads or higher tyres of different construction, it is recommended
nal load capacity = 100% load, as the load index
at the following address: speeds than those recommended by the vehicle that tyres of the same type be fitted in all wheel
also indicates *.
or tyre manufacturer shorten the service life of positions.
Continental Reifen Deutschland GmbH
the tyre. Maximum speed
P.O. Box 169 Rims
A speed symbol (SI) is used to designate the
30001 Hannover These instructions must be followed if vehicle Only the specified rims may be mounted on new
speed rating of a tyre. The speed rating indicates
Germany safety – and that of those fitting tyres – is to be commercial vehicles series. Tapered bead seat
the maximum speed assigned as per nominal
guaranteed. This applies above all to instructions rims with a diameter of 16" or less should be
This service brochure is for information purposes load capacity of the tyre. The load capacity can
regarding tyre pressure. equipped with safety shoulders (e.g. round hump)
only. All liability is excluded, whether for damage be exceeded when the vehicle, due to its con-
if tubeless radial tyres are fitted on them. The rim
or for other legal reasons (see also page 2). Failure to comply with these instructions could struction, has a lower maximum speed and vice
sizes printed in bold type in the table on page 34
result in tyre damage that may even lead to tyre versa (see the tables on page 12 and 13).
All designs are in compliance with DOT regula- 4 )
are optimal Continental sizes with respect to
blow-outs under certain circumstances. This,
tions and are marked accordingly. Inflation pressure service life, wear pattern and durability.
in turn, could cause traffic accidents involving
The inflation pressures indicated in the tables are
All tyres have been type-approved in accordance damage to property and/or personal injury Wheels
minimum values given for reference purposes.
with UN 5 ) Reg. 54 and 117 and thus fulfill the (see also page 5). The load capacity must be adequate in all cases.
All inflation pressures apply to the “cold” tyre, i.e.
requirements of the applicable EU regulations.
the state in which the tyre is in after having stood
outdoors for several hours, not exposed to intense
sunlight.
M + S tyres
M+S marked tyres provide a tread pattern or struc-
ture that is designed to deliver performance that
exceeds that of a standard tyre on snow and other
surfaces with low adhesion.
General hints
Tyre designations Tyre designations
Load indices (LI)
In the past the tyre load capacity category was These specifications form part of the designation
LI kg LI kg LI kg LI kg LI kg LI kg
indicated solely by a PR number. Nowadays, a according to US Safety Regulation FMVSS 119 **,
19 77.5 50 190 81 462 112 1120 143 2725 174 6700 tyre’s load capacity as well as its speed capability which covers all new pneumatic tyres for light
20 80 51 195 82 475 113 1150 144 2800 175 6900 are usually indicated by a load index and a speed trucks, trucks, buses and trailers intended for use
21 82.5 52 200 83 487 114 1180 145 2900 176 7100 symbol. on public highways as well as motorcycle tyres.
22 85 53 206 84 500 115 1215 146 3000 177 7300 Canada and Israel also use this specification.
The load index (LI) is a numerical code which
23 87.5 54 212 85 515 116 1250 147 3075 178 7500
precisely indicates the tyre’s load carrying Date of manufacture
24 90 55 218 86 530 117 1285 148 3150 179 7750
capacity. The last 4 digits of the DOT ID no. indicate the
25 92.5 56 224 87 545 118 1320 149 3250 180 8000
week and year of manufacture.
26 95 57 230 88 560 119 1360 150 3350 181 8250 A speed symbol (SI) is used to designate the speed
27 97.5 58 236 89 580 120 1400 151 3450 182 8500 rating of the tyre, as shown in the rep resentation 2005
28 100 59 243 90 600 121 1450 152 3550 183 8750 below.
}
e. g. DOT XXX XXXXXX 0205
29 103 60 250 91 615 122 1500 153 3650 184 9000
}
The use of the LI and SI was prompted by the
30 106 61 257 92 630 123 1550 154 3750 185 9250 2nd week
introduction of UN* Reg. 54 and the EU tyre
31 109 62 265 93 650 124 1600 155 3875 186 9500
directive for Europe (in force as of January 1,
32 112 63 272 94 670 125 1650 156 4000 187 9750
1993), according to which pneumatic tyres
33 115 64 280 95 690 126 1700 157 4125 188 10000 Speed symbols (SI)
intended for road use at speeds in excess of
34 118 65 290 96 710 127 1750 158 4250 189 10300
80 km/h must carry an operational designation
35 121 66 300 97 730 128 1800 159 4375 190 10600 comprising LI (single/dual) and SI. Alongside the
36 125 67 307 98 750 129 1850 160 4500 191 10900 nominal operational designation a tyre may also M N
37 128 68 315 99 775 130 1900 161 4625 192 11200 bear an additional operational designation, e.g.
L P
38 132 69 325 100 800 131 1950 162 4750 193 11500 with a lower LI and an SI for higher speeds. These 81 87
39 136 70 335 101 825 132 2000 163 4875 194 11800 specifications have to be included. 74 (130)(140) 93
40 140 71 345 102 850 133 2060 164 5000 195 12150 K Q
(120) (150)
41 145 72 355 103 875 134 2120 165 5150 196 12500
Example: 154 68 (110) (160) 99
315/70 R 22.5 152/148 L 150 K
42 150 73 365 104 900 135 2180 166 5300 197 12850
J mph R
62 (100)
(km/h)
(170) 106
43 155 74 375 105 925 136 2240 167 5450 198 13200 An uncoded maximum load-capacity and tyre-
(90) (180)
44 160 75 387 106 950 137 2300 168 5600 199 13600 pressure data in Ibs (1 Ibs = 0.454 kg) and psi 56 112
(80) (190)
45 165 76 400 107 975 138 2360 169 5800 200 14000 (pounds per square inch - 1 bar = 14.5 psi) may G S
50 118
46 170 77 412 108 1000 139 2430 170 6000 201 14500 also be moulded into the tyre.
47 175 78 425 109 1030 140 2500 171 6150 202 15000 F T
48 180 79 437 110 1060 141 2575 172 6300 203 15500
49 185 80 450 111 1090 142 2650 173 6500 204 16000
General hints
Tyre designations Units of measurement and definitions
(DIN 70020)
W
tyre width
As a matter of principle, the technical data in the Max. operational width
M
tables always complies with the international is the maximum permitted width. This includes
standards as specified by ISO and the ETRTO. scuff ribs, decorative ribs, lettering and permanent
Further details such as other tyre sizes or designs, growth during use. Dynamic deformations are not
A plus the static radius and the rolling circumference included.
H
comply with DIN/WdK Guidelines.
Static radius
r Lengths is the distance from the tyre centre to the ground
are given in millimetres (mm). level. Measurements are checked on fitted-tyres
M = Dual-tyre spacing inflated to the inflation pressure spec ified in
tyre Ø new A
f
Rim width
DIN 70020 Part 5.
The linear distance between the flanges of the rim.
Rim Ø d
rim width
Rolling circumference
A = Outer diameter of the tyre Cross-section
r = static radius W and Ø new when using the is the distance covered by each revolution of
f = deflection under load measuring rim
Half the difference between the overall diameter
the tyre.
and the nominal rim diameter.
Load capacities
Tyre width
are given in kgs (weight in the sense of mass)
Vehicle Example of designation Example comprises details of The section width of an inflated tyre mounted on
tyre group its theoretical rim and indicated in the tyre size Dual-tyre spacing
Tyre size 1 )
Service description 2 )
Tyre width H:W Rim dia
code code designation. Maintaining the minimum spacing distance ensures
W % d that the two tyres in a dual fitment arrangement
Outer diameter
Light truck 185 R 14 C 102/100 N 185 mm ~ 90 14
function without any infringement of the ETRTO
The diameter of an inflated tyre at the outermost
standards providing the tyres are not fitted with
195/75 R 16 C 107/105 N 195 mm 75 16 surface of the tread.
chains. In the course of development, a variety
Truck 12 R 22.5 152/148 L 300 mm ~ 90 22.5 Nominal rim diameter of design ations for tyre dimensions have been
315/80 R 22.5 156/150 L 315 mm 80 22.5 It is a size code figure for reference purposes only, introduced, some of which are used concurrently.
(154/150 M) 3 ) as indicated in the tyre and rim size designation. The following combination is most frequently
12.00 R 20 154/150 K 300 mm 100 20 used: tyre width in mm, then H : W (height : width)
Inflation pressure
Trailer 365/80 R 20 160/– K 365 mm 80 20 in % and finally the codes for the tyre construction
Tyre inflation pressure is given in bar based on
– for example R for “radial” and “-” for “crossply” –
385/65 R 22.5 160/– K 385 mm 65 22.5 cold tyres.
and the nominal rim diameter as code. When plan-
Bus 275/70 R 22.5 148/145 J 275 mm 70 22.5 Outer diameter New * ning vehicle wheel space, automotive designers
295/80 R 22.5 152/148 M 295 mm 80 22.5 is a nominal size which refers to the tread centre. must proceed on the basis of the maximum values
for tyre width and outer diameter, taking into account
Max. outer diameter in service
the tyre’s static and dynamic deformation. In this
is the maximum diameter permitted in the tread
way they ensure that all standardly approved tyres
centre as a result of permanent growth during tyre
will fit in all cases. If this is not possible in excep-
use. Dynamic deformations are not included.
tional cases, appropriate measures are to be taken
Cross-section width New * to exclude any possible risk to safety.
1) “R” = radial design
“C” = light truck (van) tyre with LI for single tyres = 121 and below, see also page 5
is a nominal size which refers to the smooth tyre wall.
2) S ervice description = load index for single/dual tyres plus speed symbol (see also tables on following pages)
3) Supplementary service description * Construction size
Technical Data Book General hints 10 11
General hints
Sidewall markings
The tyre designation markings satisfy both the US standard (FMVSS 119)
and the European standard (UN Reg. 54).
3
22.5 = nominal rim diameter In accordance with US standard
R
154 = load index for single fitment Tread: under the tread there are five steel
OT
7
ATI
12
150 = load index for dual fitment cord plies (including casing)
ON
L = speed symbol Sidewall: viewed from the side there is one
steel cord ply (in this case the casing ply)
2 13
3 TWI
10 Tread Wear Indicator 10 DOT
= U.S. Department of Transportation
T
Explanation
General hints
Load capacities Load capacities
for various maximum design speeds for various maximum design speeds
Maximum speed C-tyres with load index 121 (1450 kg) Maximum speed Tyres with load index 122 (1500 kg)
in km/h or less as single fitments in km/h or more as single fitments
(determined by Approved load capacity in % of the nominal load capacity 2 ) (determined by Approved load capacity in % of the nominal load capacity 2 )
vehicle design) equals the load index for reference speed vehicle design) equals the load index for reference speed
L (120) M (130) N (140) P (150) Q–T (160–190) F (80) G (90) J (100) K (110) L (120) M (130)
160 – – – – 100 130 – – – – – 100
155 – – – – 100 127.5 – – – – – 100
150 – – – 100 100 125 – – – – – 100
140 – – 100 100 100 122.5 – – – – – 100
138 – – 100 100 100 120 – – – – 100 100
136 – – 100 100 100 117.5 – – – – 100
134 – – 100 100 100 115 – – – – 100
132 – – 100 100 100 112.5 – – – – 100
130 – 100 100 100 100 110 – – – 100 100
128 – 100 100 100 107.5 – – – 100
126 – 100 100 100 105 – – – 100
124 – 100 100 100 102.5 – – – 100
122 – 100 100 100 100 – – 100 100
120 100 100 100 100 95 – – 101
118 100.5 90 – 100 102
116 101 85 – 102 103
114 101.5 80 100 104
112 102 75 102.5 105.5
110 102.5 70 105 107
108 103 65 107.5 108.5
106 103.5 60 110
104 104 55 111
102 104.5 50 112
100 105 45 113
95 106.5 40 1 ) 115
90 see see 107.5 see see 35 1 ) see see see see see 119
85 column column 108.5 column column 30 1 ) column column column column column 125
80 N N 110 N N 25 1 ) M M M M M 135
75 111 20 1 ) 150
70 112.5 15 1 ) 165
65 113.5 Application restricted
60 115 speed
55 117.5 10 1 ) 3 ) 180
50 120 5 1 ) 3 ) 210
45 122 Stationary 1 ) 3 ) 250
40 1 ) 125
35 1 ) 129
1) Dual-tyres = 2 x single load capacity
30 1 ) 135
2) A sign indicating the max speed must be attached to trailers restricted to speeds below 100 km/h (62 mph).
25 1 ) 142 3) Ask the tyre manufacturer about these applications.
20 1 ) 150
15 1 ) 160 Tyres with SI ratings P and Q under full load at speeds of over 140 km/h should be inflated an extra 0.1 bar for every
excess 10 km/h. No excess loads are applicable over 65 km/h for tyres on heavy trailers (with laden weight > 3.5 t).
Application restricted The load/speed variation given on this page do not apply to the additional service description (the so called Single Point).
speed
10 1 ) 175 See general notes on page 5.
5 1 ) 190
This table is only applicable in conjunction with air pressure multiplier on page 14.
Stationary 1 ) 210 If applied please check dual spacing (dual tyre contact) and rim status.
Technical Data Book General hints 14 15
General hints
Air pressure multiplier Load capacities of tyres in special cases
for increased load capacity due to maximum design speed (EU Reg. 458/2011)
Maximum speed Air pressure multiplier for reference speed Case Type of service Approved load
in km/h (speed index) of tyre capacity as % of
(determined by the nominal load
vehicle type)
G, J, K, L, M N, P, Q, R, S capacity in the
90 km/h - 130 km/h 140 km/h - 180 km/h tables
140 1 1 Special-service vehicles:
135 1 Fire brigade vehicles with special superstructures, road flushers, road
130 1 1 sweepers, garbage trucks, cherry-pickers, municipal service vehicles of 110
125 1 1 a similar nature and other public utility vehicles, provided that their
maximum vehicle design speed does not exceed 60 km/h.
120 1 1
115 1 1.01 2 Commercial vehicles:
110 1 1.02 With special superstructures (concrete mixers, aircraft refuellers) used in 110
105 1 1.06 local service with maximum vehicle design speeds not in excess of 60 km/h.
100 1 1.06
3 Regular-service buses (M 3-Class I, M2-Class A):
95 1 1.08 Vehicles in urban and suburban service constructed with areas for stand- 115
90 1 1.09 ing passengers to allow frequent passenger movement.
85 1 1.10
80 1 1.12 4 Aircraft refuellers (internal use only):
Aircraft refuellers at speeds of up to 30 km/h (inflation pressure + 15%, 135
75 1.01 1.14 no reduction for dual fitment).
70 1.02 1.15
65 1.04 1.15 Please note: This chart is not applicable in conjunction with the charts on pages 12 or 13 in correspondence with the chart on page 14.
60 1.06 1.18
55 1.07 1.22
50 1.08 1.25
45 1.09 1.28
40 1.10 1.30
35 1.11 1.30
30 1.13 1.30
25 1.17 1.30
20 1.21 1.30
15 1.25 1.30
10 1.30 1.35
5 1.40 1.35
0 1.40 1.40
The multipliers cited are to be used for an operating pressure of up to 10 bar.
Example: In the case of a K-rated tyre (110 km/h) and nominal inflated pressure of 7.5 bar, the inflation pressure can be increased to 8.25 bar
if the vehicle’s maximum design speed is set at 40 km/h (1.1 x 7.5 bar) to exploit an increased load capacity of 115% of nominal load capacity.
Technical Data Book General hints 16 17
General hints
Truck chassis with crane superstructure Bus tyre fitment
(mobile crane) Recommended inflation pressures for tyres on town and country buses
for various axle loads
Tyre size PR Single/ Load capacity (kg) per axle and speed (km/h) Tyre Tyre size Ope- Load Single/ Max. permitted axle weight (kg) for inflation pressure (bar) (psi)
dual pres- rating index dual including +10% extra as per German Transport Association (DIN 7805)
fitment sure 2 ) code fitment +15% extra as per German Transport Association (DIN 7805)
Statio- bar 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
nary 1 ) 10 20 50 65 70 75 80 (psi) (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
10.00 R 20 16 S 16500 12000 10000 7700 7200 7000 6800 6700 9.0 10.00 R 20 146/143 146 S 3960 4310 4650 4985 5315 5640 5960 6275 6590 6900
D 33000 24000 20000 14000 13000 12800 12400 12000 (131) 143 D 7195 7830 8450 9060 9660 10250 10830 11405 11970 12535
11 R 22.5
385/55 R 22.5 160/ - 160 S 5940 6465 6975 7480 7975 8460 8945 9415 9885 10350
11.00 R 20 16 S 17900 13000 10800 8300 7800 7600 7400 7200 10.0
D 35800 26000 21600 14800 14000 13600 13200 12800 (145)
12 R 22.5 275/70 R 22.5 148/145 148 S 4160 4525 4885 5235 5580 5925 6260 6590 6920 7245
145 D 7660 8335 8995 9640 10280 10910 11525 12140 12740 13340
12.00 R 20 18 S 20500 14750 12300 9200 8700 8550 8400 8250 10.0
D 41000 29500 24600 16600 15700 15400 15200 14800 (145) 305/70 R 22.5 150/148 150 S 4425 4810 5195 5570 5935 6300 6655 7010 7360 7705
13 R 22.5 148 D 8320 9050 9770 10475 11165 11850 12520 13185 13840 14490
14.00 R 20 18 S 22500 16200 13500 10080 9675 9450 9225 9000 8.0 295/80 R 22.5 152/148 152 S 4685 5100 5505 5900 6290 6675 7055 7430 7800 8165
D 45000 32400 27000 18100 17400 17000 16600 16500 (116) 148 D 8320 9050 9770 10475 11165 11850 12520 13185 13840 14490
12.00 R 24 20 S 25000 18000 15000 11450 10675 10450 10280 10000 10.0
11 R 22.5 148/145 148 S 4160 4525 4885 5235 5580 5925 6260 6590 6920 7245
D 48700 35000 29200 20000 18700 18300 18000 17500 (145)
145 D 7660 8335 8995 9640 10280 10910 11525 12140 12740 13340
1) When boom is swung out in unfavourable position
2) For inflation pressure of 8.0 bar (116 psi) and over use valve slit cover plate
Technical Data Book General hints 18 19
General hints
Wheels and rims Offset
The offset is the distance from the centre of the
Rim centre Rim centre
There are three main types of rim for commercial vehicle tyres:
Ø 6 Ø 5 Multi-part flat base rims for tubeless tyres Multi-part flat base rims for tyres with inner tubes
7
8 9
5 bolt circle diameter Please contact rim manufacturers for detailed information regarding available rim sizes and variants.
Technical Data Book Commercial Vehicle Tyres 20 21
Conti EcoPlus HS3 Conti EcoPlus HS3 Conti EcoPlus HD3 Conti EcoPlus HT3
Vehicle Tyres
Commercial
50 / 55 series also as ContiRe * also as ContiRe
Motorway
Motorway
Conti EfficientPro S HSL 2+ ECO-PLUS Conti EfficientPro D HTL 2 ECO-PLUS HTL 1 ECO-PLUS
17.5 19.5
only as ContiRe
Conti Hybrid HS3 Conti Hybrid HS3 Conti Hybrid HS3 Conti Hybrid HD3 Conti Hybrid HD3 Conti Hybrid HT3
65 series 19.5 22.5 19.5 22.5
also as ContiRe * also as ContiRe * also as ContiRe *
Regional
HSR HSR HSR HDR HDR HTR 2 HTR 2
9 R, 10 R, 13 R 22.5 11 R, 12 R 22.5 20 / 22 22.5 20 also as ContiRe 17.5
* in preparation
Technical Data Book Commercial Vehicle Tyres 22 23
Vehicle Tyres
Commercial
17.5 17.5
Regional
Regional
LSR 1+ LSR 1 LSR 1 LDR 1+ LDR 1
9.5 R 17.5, 10 R 17.5 17.5
Urban
Urban
ContiRe CityService HA3 ContiRe CityService HD3
Conti Scandinavia HS3 Conti Scandinavia LS3 Conti Scandinavia HD3 Conti Scandinavia LD3 Conti Scandinavia HT3 Conti Scandinavia HT3
19.5 17.5 19.5 17.5 19.5 17.5
Winter
Winter
HSW 2 SCANDINAVIA HSW 2 SCANDINAVIA HDW 2 SCANDINAVIA HDW HTW 2 SCANDINAVIA HTW 2 SCANDINAVIA
55 / 65 series also as ContiRe also as ContiRe 19.5 also as ContiRe
Technical Data Book Commercial Vehicle Tyres 24 25
Coach
Conti Coach HA3
Vehicle Tyres
Commercial
Intercity
Intercity
Conti CityPlus HA3
Conti Urban HA3 Conti Urban HA3 M+S Conti Urban HA3 M+S
also as ContiRe 19.5
also as ContiRe
Urban
Urban
HSU
Winter
HSW 2 COACH
also as ContiRe
Technical Data Book Commercial Vehicle Tyres 26 27
CrossTrac HS3 HSC 1 HSC 1 HSC CrossTrac HD3 HDC 1 CrossTrac HT3 HTC 1
Vehicle Tyres
Commercial
11 R, 12 R, 13 R 22.5 20 also as ContiRe also as ContiRe
On/Off
On/Off
LSC HDC HDC HTC
55 / 65 series 22.5
Off
HSO LCS
Technical Data Book Commercial Vehicle Tyres 28 29
Steer
M + S and Three Peak Mountain Tyre size M+S T Tread Pattern Tyre size M+S T Tread Pattern
Snow Flake (3PMSF) Designation 3 55/50 R 22.5 1 1 HSW 2 SCAN 3 15/80 R 22.5 1 1 Conti Hybrid HS3
Vehicle Tyres
Commercial
3 85/65 R 22.5 1 1 Conti Hybrid HS3 1 HSC 1
1 HSC 1 1 HSC 1
performance on mud, snow and ice is provided Source: Economic Commission for Europe of the 3 15/70 R 22.5 1 1 Conti Hybrid HS3 3 65/85 R 20 1 HCS
by tyres showing the Three Peak Mountain Snow- United Nations (UN/ECE), R117 1 1 Conti LightPro S 3 95/85 R 20 1 HCS
flake (3PMSF) symbol. All tyres suitable for winter
1 1 HSW 2 SCAN 12.00 R 20 1 HSC
and marked M + S and/or 3PMSF are listed below.
2 95/80 R 22.5 1 1 Conti Hybrid HS3 1 HSO SAND
2 35/75 R 17.5 1 Conti Hybrid LS3 305/70 R 19.5 1 Conti Hybrid HS3
Drive Trailer
Tyre size M+S T Tread Pattern Tyre size M+S T Tread Pattern Tyre size M+S T Tread Pattern
2 45/70 R 17.5 1 1 Conti Hybrid LD3 305/70 R 22.5 1 1 HDR 2 05/65 R 17.5 1 HTR 2
2 65/70 R 17.5 1 1 Conti Hybrid LD3 315/70 R 22.5 1 1 Conti EcoPlus HD3 2 45/70 R 17.5 1 HTR 2
2 05/75 R 17.5 1 1 Conti Hybrid LD3 1 1 Conti EfficientPro D 1 1 Conti Scandinavia HT3
2 15/75 R 17.5 1 1 Conti Hybrid LD3 1 1 Conti Hybrid HD3 2 15/75 R 17.5 1 HTR 2
2 25/75 R 17.5 1 1 Conti Hybrid LD3 1 1 HDW 2 SCAN 2 35/75 R 17.5 1 HTR 2
Vehicle Tyres
Commercial
2 35/75 R 17.5 1 1 Conti Hybrid LD3 295/80 R 22.5 1 HDL 1 1 1 Conti Scandinavia HT3
1 1 Conti Scandinavia LD3 1 1 Conti Hybrid HD3 4 45/45 R 19.5 1 Conti Hybrid HT3
8.5 R 17.5 1 LDR 1+ 1 1 Conti CrossTrac HD3 4 35/50 R 19.5 1 Conti Hybrid HT3
10 R 17.5 1 1 LDR 1 315/80 R 22.5 1 1 Conti EcoPlus HD3 2 65/70 R 19.5 1 1 Conti Scandinavia HT3
2 45/70 R 19.5 1 1 Conti Hybrid HD3 1 HDL 2 2 85/70 R 19.5 1 1 Conti Scandinavia HT3
2 65/70 R 19.5 1 1 Conti Hybrid HD3 1 1 Conti Hybrid HD3 3 85/55 R 22.5 1 Conti Hybrid HT3
2 85/70 R 19.5 1 1 Conti Hybrid HD3 1 1 Conti CrossTrac HD3 3 85/65 R 22.5 1 Conti Hybrid HT3
3 15/45 R 22.5 1 1 Conti EcoPlus HD3 10 R 22.5 1 1 RMS 1 Conti CrossTrac HT3
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 5.0
4.5 5.5
5.0 6.0
5.5 6.5
6.0 7.0
6.5 7.5
7.0 8.0
7.5 8.5
8.0 9.0
8.5 9.5
9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (73)
(65) (80)
(73) (87)
(80) (94)
(87) (102)
(94) (109)
(102) (116)
(109) (123)
(116) (131)
(123) (137)
(131)
2 45/70 R 17.5 HTL 2 143/141 L 18 L 120 TL C C 1 70 6.75 270 250 803 240 789 364 2406 146 S 3590 3870 4150 4425 4695 4965 5225 5485 5745 6000
(146/146 F) (F 80) 7.50 279 258 248 143 S 3405 3675 3940 4200 4455 4710 4955 5205 5450
146 D 7180 7745 8305 8855 9395 9930 10455 10975 11490 12000
HTR 2 143/141 L 18 L 120 TL C C 2 71 141 D 6435 6945 7445 7935 8420 8900 9370 9835 10300
(146/146 F) (F 80)
Vehicle Tyres
Commercial
(65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 05/65 R 17.5 HTR 2 129/127 K 16 K 110 TL D C 1 69 6.00 231 213 721 205 711 334 2154 132 S 2495 2695 2890 3080 3270 3455 3640 3820 4000
(132/132 G) (G 90) 6.75 239 220 212 129 S 2310 2495 2675 2850 3025 3195 3365 3530 3700
132 D 4995 5390 5780 6165 6540 6910 7280 7640 8000
127 D 4370 4720 5060 5395 5725 6045 6370 6685 7000
2 45/70 R 17.5 Conti Hybrid 136/134 M 14 M 130 TL C B 1 69 6.75 270 250 803 240 789 364 2406 146 S 3590 3870 4150 4425 4695 4965 5225 5485 5745
LS3 7.50 279 258 248 143 S 3405 3675 3940 4200 4455 4710 4955 5205 5450
136 S 2930 3160 3390 3610 3835 4050 4265 4480
Conti Hybrid 136/134 M 14 M 130 TL D C 2 74 146 D 7180 7745 8305 8855 9395 9930 10455 10975 11490
LD3 141 D 6435 6945 7445 7935 8420 8900 9370 9835 10300
134 D 5545 5985 6415 6840 7260 7670 8075 8480
2 65/70 R 17.5 Conti Hybrid 139/136 M 14 M 130 TL C B 1 69 6.75 286 264 254 139 S 3175 3430 3675 3920 4160 4395 4625 4860
LS3 7.50 295 272 831 262 817 376 2492 137 S 3155 3405 3650 3895 4130 4365 4600
136 D 5860 6325 6780 7225 7670 8105 8535 8960
Conti Hybrid 139/136 M 14 M 130 TL D C 2 74 134 D 5820 6280 6735 7180 7620 8050 8480
LD3
2 05/75 R 17.5 Conti Hybrid 124/122 M 12 M 130 TL C B 1 69 5.25 222 205 197 124 S 2310 2495 2675 2850 3025 3200
LS3 6.00 231 213 765 205 753 353 2297 122 D 4335 4680 5015 5350 5675 6000
6.75 239 220 212
Conti Hybrid 124/122 M 12 M 130 TL D C 2 74
LD3
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 15/75 R 17.5 HTL 2 135/133 L 16 L 120 TL B C 1 70 6.00 239 220 779 212 767 359 2339 135 S 2720 2940 3150 3360 3565 3765 3965 4165 4360
6.75 246 228 219 126 S 2595 2800 3005 3200 3400
Conti Hybrid 126/124 M 12 M 130 TL C B 1 69 133 D 5145 5555 5955 6350 6735 7120 7495 7870 8240
LS3 124 D 4885 5275 5655 6030 6400
Vehicle Tyres
Commercial
LS3
2 25/75 R 17.5 Conti Hybrid 129/127 M 12 M 130 TL C B 1 69 6.00 246 228 219 129 S 2675 2885 3095 3295 3500 3700
LS3 6.75 254 235 797 226 783 366 2388 127 D 5060 5460 5855 6240 6620 7000
2 35/75 R 17.5 HTL 2 143/141 L 16 L 120 TL B C 1 70 6.75 262 242 811 233 797 372 2431 144 S 3495 3775 4045 4315 4580 4835 5095 5345 5600
7.50 271 251 241 143 S 3405 3675 3940 4200 4455 4710 4955 5205 5450
Conti Hybrid 132/130 M 12 M 130 TL C B 1 69 132 S 2745 2960 3175 3385 3590 3795 4000
LS3 144 D 6995 7550 8095 8630 9160 9675 10190 10695 11200
141 D 6435 6945 7445 7935 8420 8900 9370 9835 10300
Conti Hybrid 132/130 M 12 M 130 TL D C 2 74 130 D 5215 5630 6035 6435 6825 7215 7600
LD3
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 35/75 R 17.5 Conti 132/130 M 12 M 130 TL D C 2 75 6.75 262 242 811 233 797 372 2431 144 S 3495 3775 4045 4315 4580 4835 5095 5345 5600
Scandinavia 7.50 271 251 241 143 S 3405 3675 3940 4200 4455 4710 4955 5205 5450
LD3 132 S 2745 2960 3175 3385 3590 3795 4000
144 D 6995 7550 8095 8630 9160 9675 10190 10695 11200
Conti 143/141 K 16 K 110 TL D C 2 72 141 D 6435 6945 7445 7935 8420 8900 9370 9835 10300
Scandinavia (144/144 F) (F 80) 130 D 5215 5630 6035 6435 6825 7215 7600
HT3
8 R 17.5 LSR 117/116 L 10 L 120 TL E C 1 70 5.25 225 208 799 200 785 367 2394 117 S 2220 2395 2570
6.00 234 216 208 116 D 4320 4660 5000
LDR 117/116 L 8 L 120 TL E C 2 72 6.75 243 225 216
8.5 R 17.5 LSR 1+ 121/120 L 12 L 120 TL E B 1 70 5.25 233 215 207 121 S 2350 2535 2720 2900
Vehicle Tyres
Commercial
LDR 1+ 121/120 L 12 L 120 TL E C 2 75 6.75 251 232 223
9.5 R 17.5 LSR 1 129/127 L 14 L 120 TL E B 1 70 6.00 262 242 233 131 S 2675 2885 3095 3300 3500 3700 3900
6.75 270 250 859 240 843 392 2571 129 S 2675 2885 3095 3295 3500 3700
LDR 1 129/127 L 14 L 120 TL E C 2 74 128 D 4940 5335 5715 6095 6470 6835 7200
127 D 5060 5460 5855 6240 6620 7000
LSC 129/127 L 14 L 120 TL D C 1 70
(131/128 M) (M 130)
10 R 17.5 LSR 1 134/132 L 16 L 120 TL D B 1 70 6.75 277 256 246 134 S 2910 3140 3365 3590 3810 4025 4240
7.50 286 264 875 254 859 398 2620 132 D 5490 5925 6355 6775 7185 7595 8000
LDR 1 134/132 L 16 L 120 TL D C 2 74
4 45/45 R 19.5 HTL 1 160/ - J 22 J 100 TL – – – 14.00 453 911 436 895 416 2712 160 S 5165 5620 6065 6505 6935 7360 7775 8190 8595 9000
ContiRe 15.00 464 446
4 35/50 R 19.5 Conti Hybrid 160/ - J 20 J 100 TL B C 2 72 14.00 456 949 438 931 431 2821 160 S 5165 5620 6065 6505 6935 7360 7775 8190 8595 9000
HT3 15.00 466 448
3 85/55 R 19.5 Conti Hybrid 156/ - J 16 J 100 TL B C 1 70 11.75 396 935 381 919 426 2785 156 S 6165 6540 6910 7280 7640 8000
HT3 12.25 401 386
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 45/70 R 19.5 Conti Hybrid 136/134 M 16 M 130 TL C B 1 69 6.75 270 250 853 240 839 389 2559 141 S 3095 3365 3635 3895 4155 4405 4655 4905 5150
HS3 7.50 279 258 248 136 S 2690 2930 3160 3390 3610 3835 4050 4265 4480
140 D 6010 6540 7055 7565 8065 8560 9045 9525 10000
Conti Hybrid 136/134 M 16 M 130 TL D C 2 74 134 D 5095 5545 5985 6415 6840 7260 7670 8075 8480
HD3
2 65/70 R 19.5 Conti Hybrid 140/138 M 16 M 130 TL C B 1 69 6.75 286 264 254 143 S 3560 3845 4120 4395 4665 4930 5190 5450
HS3 7.50 295 272 881 262 867 401 2644 140 S 3155 3430 3700 3970 4230 4490 4745 5000
Vehicle Tyres
Commercial
Conti Hybrid 140/138 M 16 M 130 TL D C 2 74 138 D 5955 6480 6995 7495 7995 8480 8960 9440
HD3
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 85/70 R 19.5 Conti Hybrid 146/144 M 16 M 130 TL C B 1 69 7.50 311 287 276 150 S 4185 4515 4840 5160 5475 5790 6095 6400 6700
HS3 8.25 318 294 911 283 895 413 2730 146 S 3445 3745 4045 4335 4620 4905 5185 5460 5730 6000
9.00 327 303 291 145 S 3485 3790 4090 4385 4675 4965 5245 5525 5800
Conti Hybrid 146/144 M 16 M 130 TL C C 2 74 148 D 7870 8495 9105 9710 10305 10885 11465 12035 12600
HD3 144 D 6430 6995 7550 8095 8630 9160 9675 10190 10695 11200
143 D 6550 7125 7690 8245 8790 9330 9860 10380 10900
ContiRe 146/144 M 16 M 130 TL – – –
Hybrid HD3
Vehicle Tyres
Commercial
Conti 145/143 M 16 M 130 TL D C 2 75
Scandinavia
HD3
3 05/70 R 19.5 Conti Hybrid 148/145 M 18 M 130 TL C B 1 69 8.25 334 309 297 148 S 3785 4120 4445 4765 5080 5390 5695 6000 6300
HS3 9.00 343 317 941 305 923 424 2815 145 D 6970 7585 8185 8775 9355 9930 10490 11050 11600
3 15/45 R 22.5 Conti EcoPlus 147/145 L 16 L 120 TL D C 2 76 9.75 345 319 868 307 856 405 2594 147 S 4740 5025 5315 5595 5875 6150
HD3 145 D 8940 9485 10025 10555 11080 11600
3 55/50 R 22.5 Conti EcoPlus 156/ - K 18 K 110 TL C C 1 70 11.75 375 942 361 928 436 2812 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
HS3 XL
2 95/55 R 22.5 Conti EcoPlus 147/145 K 16 K 110 TL C B 1 72 9.00 329 304 908 292 896 422 2715 147 S 3530 3840 4145 4445 4740 5025 5315 5595 5875 6150
HD3 9.75 338 312 300 145 D 6660 7245 7820 8385 8940 9485 10025 10555 11080 11600
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
3 85/55 R 22.5 Conti EcoPlus 160/ - K 20 K 110 TL B B 1 70 11.75 396 1012 381 996 464 3018 160 S 5165 5620 6065 6505 6935 7360 7775 8190 8595 9000
HS3 (158/ - L) (L 120) 12.25 401 386 158 S 5110 5555 6000 6430 6855 7275 7690 8095 8500
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 95/60 R 22.5 Conti EcoPlus 150/147 L 18 L 120 TL C B 1 69 9.00 329 304 940 292 926 435 2806 150 S 3845 4185 4515 4840 5160 5475 5790 6095 6400 6700
HS3 9.75 338 312 300 147 D 7060 7685 8290 8890 9480 10055 10630 11190 11750 12300
3 15/60 R 22.5 Conti EcoPlus 154/150 L 20 L 120 TL B B 1 70 9.00 344 318 966 306 950 445 2879 154 S 4305 4685 5055 5420 5780 6130 6480 6825 7160 7500
HS3 XL 9.75 352 326 313 152 S 4075 4435 4785 5130 5470 5805 6135 6460 6780 7100
150 D 7695 8370 9035 9685 10325 10955 11580 12195 12800 13400
HSL 2+ 152/148 L 20 L 120 TL C B 1 70 148 D 7235 7870 8495 9105 9710 10305 10885 11465 12035 12600
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
3 85/65 R 22.5 HSL 2+ 160/ - K 20 K 110 TL C B 1 70 11.75 405 1092 389 1072 496 3248 164 S 5740 6245 6740 7225 7705 8175 8640 9100 9550 10000
(158/ - L) (L 120) 12.25 410 394 162 S 5455 5935 6405 6865 7320 7765 8210 8645 9075 9500
160 S 5165 5620 6065 6505 6935 7360 7775 8190 8595 9000
Conti EcoPlus 160/ - K 20 K 110 TL A C 1 69 158 S 5110 5555 6000 6430 6855 7275 7690 8095 8500
HT3 (158/ - L) (L 120)
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
3 85/65 R 22.5 HSC 1 160/ - K 20 K 110 TL C C 2 73 11.75 405 1092 389 1072 496 3248 164 S 5740 6245 6740 7225 7705 8175 8640 9100 9550 10000
(158/ - L) (L 120) 12.25 410 394 162 S 5455 5935 6405 6865 7320 7765 8210 8645 9075 9500
160 S 5165 5620 6065 6505 6935 7360 7775 8190 8595 9000
HDC 162/ - K 20 K 110 TL D C 2 75 158 S 5110 5555 6000 6430 6855 7275 7690 8095 8500
(164/ - J) (J 100)
4 25/65 R 22.5 HTR 2 165/ - K 20 K 110 TL B C 2 73 12.25 439 422 165 S 6190 6735 7270 7795 8310 8815 9315 9810 10300
4 45/65 R 22.5 HTR 2 169/ - K 20 K 110 TL C C 2 73 13.00 462 1174 444 1150 529 3485 169 S 6660 7245 7820 8385 8940 9485 10025 10555 11080 11600
14.00 472 454
HTC 1 169/ - K 20 K 110 TL C C 2 74
2 55/70 R 22.5 HSR 2 SA 140/137 M 16 M 130 TL C C 1 69 6.75 278 257 944 247 930 434 2837 142 S 3185 3465 3740 4010 4275 4535 4795 5045 5300
(142/140 L) (L 120) 7.50 287 265 255 140 S 3155 3430 3700 3970 4230 4490 4745 5000
8.25 295 272 262 140 D 6010 6540 7055 7565 8065 8560 9045 9525 10000
HDR 140/137 M 16 M 130 TL D C 2 75 137 D 5805 6315 6815 7305 7790 8265 8735 9200
(142/140 L) (L 120)
2 75/70 R 22.5 Conti Hybrid 148/145 M 18 M 130 TL C B 1 69 7.50 303 280 974 269 958 445 2922 152 S 4075 4435 4785 5130 5470 5805 6135 6460 6780 7100
HS3 8.25 311 287 276 150 S 3845 4185 4515 4840 5160 5475 5790 6095 6400 6700
148 S 3615 3935 4245 4550 4855 5150 5440 5730 6015 6300
Conti Hybrid 148/145 M 16 M 130 TL D B 1 73 148 D 7235 7870 8495 9105 9710 10305 10885 11465 12035 12600
HD3 145 D 6660 7245 7820 8385 8940 9485 10025 10555 11080 11600
HDW 2 SCAN 148/145 M 16 M 130 TL E C 2 75
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 75/70 R 22.5 Conti 150/145 J 16 J 100 TL D C 2 73 7.50 303 280 974 269 958 445 2922 152 S 4075 4435 4785 5130 5470 5805 6135 6460 6780 7100
UrbanScan (152/148 E) (E 70) 8.25 311 287 276 150 S 3845 4185 4515 4840 5160 5475 5790 6095 6400 6700
HA3 148 S 3615 3935 4245 4550 4855 5150 5440 5730 6015 6300
148 D 7235 7870 8495 9105 9710 10305 10885 11465 12035 12600
Conti 150/145 J 16 J 100 TL D C 2 75 145 D 6660 7245 7820 8385 8940 9485 10025 10555 11080 11600
UrbanScan (152/148 E) (E 70)
HD3
Commercial
(150/148 M) (M 130) 9.00 343 317 305 152 S 4075 4435 4785 5130 5470 5805 6135 6460 6780 7100
150 S 4025 4380 4725 5070 5405 5735 6060 6380 6700
HDR 150/148 M 16 M 130 TL D C 2 75 150 D 7695 8370 9035 9685 10325 10955 11580 12195 12800 13400
148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
Conti Urban 152/148 K 20 K 110 TL C C 1 70
HA3 M+S (154/150 E) (E 70)
3 15/70 R 22.5 Conti EcoPlus 156/150 L 18 L 120 TL B B 1 69 9.00 351 318 1032 312 1014 468 3093 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
HS3 XL (154/150 M) (M 130) 9.75 360 326 320 154 S 4305 4685 5055 5420 5780 6130 6480 6825 7160 7500
152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
Conti EcoPlus 154/150 L 18 L 120 TL B B 1 72 150 D 7695 8370 9035 9685 10325 10955 11580 12195 12800 13400
HD3 (152/148 M) (M 130) 148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
ContiRe 154/150 L 18 L 120 TL – – –
EcoPlus HD3 (152/148 M) (M 130)
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
3 15/70 R 22.5 ContiRe 154/150 L 18 L 120 TL – – – 9.00 351 318 1032 312 1014 468 3093 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
Hybrid HD3 (152/148 M) (M 130) 9.75 360 326 320 154 S 4305 4685 5055 5420 5780 6130 6480 6825 7160 7500
152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
HD Hybrid 154/150 L 18 L 120 TL – – – 150 D 7695 8370 9035 9685 10325 10955 11580 12195 12800 13400
ContiRe (152/148 M) (M 130) 148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
Conti 154/150 L 18 L 120 TL C B 1 73
LightPro D (152/148 M) (M 130)
2 95/80 R 22.5 HSL 2+ XL 154/148 M 16 M 130 TL C B 1 70 8.25 326 302 1062 290 1044 487 3184 154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
9.00 335 310 298 152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
HSL 2+ 152/148 M 16 M 130 TL C B 1 70 149 D 7815 8500 9175 9835 10485 11125 11760 12380 13000
148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
HSL 1+ 152/148 M 16 M 130 TL C B 2 73
COACH
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 95/80 R 22.5 HDR 2 152/148 M 16 M 130 TL – – – 8.25 326 302 1062 290 1044 487 3184 154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
ContiRe 9.00 335 310 298 152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
149 D 7815 8500 9175 9835 10485 11125 11760 12380 13000
Bandvulc 152/148 J J 100 TL – – – 148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
Wastemaster
Vehicle Tyres
Commercial
HDW 2 SCAN 154/149 M 16 M 130 TL ** ** **
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 95/80 R 22.5 Conti 152/148 K 16 K 110 TL ** ** ** 8.25 326 302 1062 290 1044 487 3184 154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
CrossTrac HD3 9.00 335 310 298 152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
149 D 7815 8500 9175 9835 10485 11125 11760 12380 13000
HSC 1 152/148 K 16 K 110 TL D C 2 73 148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
3 15/80 R 22.5 Conti EcoPlus 156/150 L 20 L 120 TL – – – 9.00 351 318 1096 312 1076 500 3282 158 S 4880 5310 5730 6145 6550 6950 7345 7735 8120 8500
HS3 AC (154/150 M) (M 130) 9.75 360 326 320 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
Conti EcoPlus 156/150 L 20 L 120 TL B B 1 69
Vehicle Tyres
Commercial
HS3 (154/150 M) (M 130)
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
3 15/80 R 22.5 HTR 156/150 K 18 K 110 TL C C 1 70 9.00 351 318 1096 312 1076 500 3282 158 S 4880 5310 5730 6145 6550 6950 7345 7735 8120 8500
9.75 360 326 320 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
Bandvulc 156/150 K K 110 TL – – – 154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
Wastemaster 150 D 8055 8760 9455 10140 10810 11470 12120 12765 13400
Commercial
HDW 2 SCAN 156/150 L 20 L 120 TL E C 2 75
(154/150 M) (M 130)
HDO 156/150 G 18 G 90 TL – – –
9 R 22.5 HSR 133/131 L 12 L 120 TL D C 1 70 6.00 250 231 986 222 970 455 2959 133 S 2890 3145 3395 3640 3880 4120
6.75 259 239 230 131 D 5475 5955 6430 6895 7350 7800
See flap inside back cover for footnotes
Technical Data Book Commercial Vehicle Tyres 17.5", 19.5", 22.5" 60 61
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
10 R 22.5 RMS 144/142 K 14 K 110 TL E C 2 73 6.75 277 256 246 144 S 3530 3840 4145 4445 4740 5030 5315 5600
7.50 286 264 1038 254 1020 474 3091 140 S 3320 3610 3900 4180 4455 4730 5000
HSR 144/142 K 14 K 110 TL D C 1 70 142 D 6685 7275 7850 8420 8975 9525 10065 10600
138 D 6270 6820 7365 7895 8415 8930 9440
T9 140/138 K 14 K 110 TL – – –
11 R 22.5 HSR 148/145 L 16 L 120 TL C C 1 70 7.50 306 283 272 148 S 3785 4120 4445 4765 5080 5390 5695 6000 6300
8.25 314 290 1070 279 1050 489 3203 145 D 6970 7585 8185 8775 9355 9930 10490 11050 11600
HDR 148/145 L 16 L 120 TL E C 2 75
Vehicle Tyres
Commercial
12 R 22.5 Conti Hybrid 152/148 L 16 L 120 TL C B 1 70 8.25 329 304 1104 292 1084 504 3306 152 S 4265 4640 5010 5370 5725 6075 6420 6760 7100
HS3 (150/148 M) (M 130) 9.00 338 312 300 150 S 4225 4600 4960 5320 5670 6020 6360 6700
148 D 7575 8240 8890 9535 10165 10785 11395 12000 12600
HSR 1 ED 152/148 L 16 L 120 TL D C 1 70
(150/148 M) (M 130)
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressur (bar) (psi)
Min. Rolling
dis- Max. standard Stat. circum-
Speed tance value in service Design value radius ference
index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
13 R 22.5 HSR 154/150 L 18 L 120 TL D C 1 70 9.00 352 319 1146 313 1124 521 3428 156 S 4590 4995 5390 5780 6165 6540 6910 7280 7640 8000
(156/150 K) (K 110) 9.75 360 326 320 154 S 4505 4905 5290 5675 6050 6420 6785 7140 7500
149 S 4315 4695 5070 5435 5795 6150 6500
HDW 154/150 K 16 K 110 TL E C 2 74 154 D 8615 9370 10115 10840 11560 12265 12960 13650 14325 15000
150 D 8055 8760 9455 10140 10810 11470 12120 12765 13400
Conti 156/150 K 18 K 110 TL ** ** ** 146 D 7970 8675 9360 10035 10700 11355 12000
CrossTrac HS3
HDC 1 ED 156/150 G 18 G 90 TL E C 2 74
(154/150 K) (K 110)
HDO 154/150 G 16 G 90 TL – – –
All Continental tyres on which regrooving is per- Conti EcoPlus HS3 / XL Conti EcoPlus HS3 / XL
tread profile
mitted have on both sidewalls, in accordance with
ECE regulation 54, the word
additional
REGROOVABLE tread
available
as a result
The additional tread depth of up to 4 mm gained of regrooving
additional
by regrooving means a significant increase in per- steel belt
steel belt
formance.
2.0 mm of
casing under tread A B B A A B A A B A
As part of their design, all-steel truck tyres have a
so-called tread stock between the upper edge of
the belt and the tread grooves. This tread stock is Example:
intended to prevent stones etc. penetrating into
Tyre size 315/80 R 22.5
the steel belt and the casing.
Vehicle Tyres
Commercial
Provided it is marked “REGROOVABLE“, a commer-
Additional tread as a result
cial vehicle tyre may be regrooved down to a 4.0 mm
of regrooving
residual undertread thickness of 2 mm above A B B B A
the breaker or belt. All additional regulations of
the respective country must be met.
Depth Width Depth Width
Size (mm) (mm) Size (mm) (mm)
Although tyres can be retreaded after reaching Regrooving should be carried out by an expert,
the legal wear limit, regrooving is not advisable in in order to avoid premature failure as well as any 355/50 R 22.5 2.5 A:10 B:8 295/60 R 22.5 3.5 A:8 B:4
every case. The tread stock thickness is reduced reduction in the tyre’s suitability for retreading.
385/55 R 22.5 3.0 A:10 B:8 315/60 R 22.5 3.0 A:8 B:4
and stones etc. can more easily penetrate and
damage the steel belts, leading to rust formation. In some countries (e.g. Germany for KOM-100 315/70 R 22.5 2.5 A:10 B:8
This has a decidedly negative effect on the tyre’s coaches and Austria for coaches) regrooving 315/80 R 22.5 3.0 A:10 B:8
suitability for remolding. of front axle tyres for coaches is prohibited. In
general, regrooving on front axle coach tyres is
The best time for regrooving is when the tread is not recommended.
worn down to about 3 mm. The tyre must then be
checked to make sure the wear is even all round. All Continental tyres on which regrooving is
Attention should be paid to local or uneven wear permitted are marked “regroovable“.
patches.
Conti EcoPlus HD3 / ContiRe Conti EcoPlus HD3 / ContiRe Conti EcoPlus HT3 / ContiRe HSL 2+ / XL
A B B B B B B B A A B B B B B B B A A B B A
A B B B A
295/55 R 22.5 3.0 A:8 B:5 315/45 R 22.5 2.5 A:7 B:5 385/55 R 22.5 2.5 6 385/65 R 22.5 3.0 A:16 B:12
295/60 R 22.5 2.5 A:7 B:5 385/65 R 22.5 2.5 6 295/80 R 22.5 3.0 A:16 B:12
A B B A A B B B A
245/70 R 17.5 2.5 8 445/45 R 19.5 3.0 13 315/70 R 22.5 3.0 A:11 B:9 385/55 R 22.5 3.0 A:11 B:8
A B B B B B B B A
A B B B A
245/70 R 19.5 3.0 8 245/70 R 17.5 2.0 5 315/70 R 22.5 2.5 A:8 B:5
12 R 22.5 3.0 8
Conti Hybrid HD3 / ContiRe Conti Hybrid HD3 / ContiRe Conti Hybrid LD3
A B B B B B B B A
295/60 R 22.5 3.0 A:7 B:6 245/70 R 19.5 3.0 5 245/70 R 17.5 2.0 5
315/60 R 22.5 3.0 A:7 B:6 265/70 R 19.5 2.5 5 265/70 R 17.5 2.5 5
275/70 R 22.5 3.0 A:7 B:6 285/70 R 19.5 3.0 5 205/75 R 17.5 2.5 5
315/70 R 22.5 3.0 A:7 B:6 305/70 R 19.5 3.0 5 215/75 R 17.5 2.5 5
Conti Hybrid HT3 / ContiRe Conti Hybrid HT3 / ContiRe HSR 2 XL HD HYBRID ContiRe
Z1
A B B A A B B B A B A B A B A B A B A B
Z2
A B B A
385/55 R 19.5 Z1 2.5 A:10 B:7 445/45 R 19.5 2.5 A:8 B:6 385/65 R 22.5 3.0 10-12 315/60 R 22.5 Z1 2.5 A:6 B:10
A A B B B A A
Z2
A A B B B A A
315/70 R 22.5 2.0 6-7 255/70 R 22.5 Z2 2.0 A:10-12 B:5-7 205/65 R 17.5 2.5 7-10 295/60 R 22.5 2.5 10
A A B B B A A B A B A B
B A A A B A A A B
8.5 R 17.5 2.0 7-8 8.5 R 17.5 2.0 A:11 B:5-7 305/70 R 22.5 2.5 10-12 9 R 22.5 3.0 A:10-12 B:4-5
9.5 R 17.5 2.5 7-8 9.5 R 17.5 2.5 A:11 B:5-7 10 R 22.5 3.5 A:10-12 B:4-5
ContiRe CityService HA3 ContiRe CityService HD3 Conti Scandinavia HS3 Conti Scandinavia LS3
A B B A A B B B B B A
295/80 R 22.5 3.0 A:9 B:11 295/80 R 22.5 3.0 A:10 B:5-6 265/70 R 19.5 3.0 7 215/75 R 17.5 2.5 5
315/80 R 22.5 3.0 A:9 B:11 315/80 R 22.5 2.5 A:10 B:5-6 285/70 R 19.5 3.0 7 235/75 R 17.5 2.5 5
Conti Scandinavia HD3 Conti Scandinavia LD3 Conti Scandinavia HT3 Conti Scandinavia HT3
265/70 R 19.5 3.0 6 215/75 R 17.5 2.5 6 265/70 R 19.5 3.0 6 245/70 R 17.5 2.5 6
285/70 R 19.5 3.0 6 235/75 R 17.5 2.5 6 285/70 R 19.5 3.0 7 215/75 R 17.5 2.5 6
HSW 2 SCAN / XL HDW 2 SCAN / ContiRe HTW 2 SCAN / ContiRe HTW 2 SCAN / ContiRe
A B B B A
355/50 R 22.5 2.5 10 295/60 R 22.5 3.5 6 385/55 R 22.5 3.0 10 445/45 R 19.5 2.0 A:11 B:8
385/55 R 22.5 3.0 10-12 315/60 R 22.5 4.0 6 385/65 R 22.5 3.0 10
Segment People
Conti Coach HA3 Conti Coach HA3 ED Conti Coach HA3 AC Conti CityPlus HA3
295/80 R 22.5 3.5 6-7 295/80 R 22.5 4.0 6-7 295/80 R 22.5 2.5 6-7 295/80 R 22.5 3.5 7-8
Conti Urban HA3 Conti Urban HA3 M+S / ContiRe Conti Urban HA3 M+S / ContiRe HSU 1
Z1
Z2
A B B A
275/70 R 22.5 2.5 6-7 245/70 R 19.5 Z1 3.0 6 305/70 R 22.5 2.5 7-8 11 R 22.5 3.0 10-12
B A A A B
385/55 R 22.5 3.5 10-12 295/80 R 22.5 4.0 8-10 275/70 R 22.5 3.0 7-8 275/70 R 22.5 3.5 6-7
Segment Construction
A B B A A B B A
Z2
385/65 R 22.5 Z1 3.5 A:8 B:6 295/80 R 22.5 3.5 8 385/65 R 22.5 3.5 A:8 B:6
13 R 22.5 Z2
3.5 A:8 B:8
B A B B A B B A B B A B
Z2
A B A B A
385/65 R 22.5 3.5 12 295/80 R 22.5 Z2 3.5 A:12 B:7 315/80 R 22.5 3.5 A:12 B:7
12 R 22.5 3.5 12
13 R 22.5 3.5 12
A B A B A B A A B A B A B A
Z2
385/65 R 22.5 3.5 A:10 B:7 385/65 R 22.5 3.0 A:10 B:7 9.5 R 17.5 2.0 10 385/55 R 22.5 Z2 3.5 10-12
B A B A B
385/65 R 22.5 3.5 10-12 13 R 22.5 3.0 8 265/70 R 17.5 2.0 A:15 B:6 315/80 R 22.5 3.5 10-12
425/65 R 22.5 3.5 10-12 445/65 R 22.5 3.5 A:25 B:7 13 R 22.5 4.0 10-12
Rolling
Min. Rolling
Max. standard Stat. circum-
dis- Max. standard Stat. circum-
value in service Design value radius ference
Speed tance value in service Design value radius ference
index
Index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 3.25
4.5 3.50
5.0 3.75
5.5 4.00
6.0 4.25
6.5 4.50
7.0 4.75
7.5 5.00
8.0 5.25
8.5 5.50
9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (47)
(65) (51)
(73) (54)
(80) (58)
(87) (62)
(94) (102)
(65) (109)
(69) (116)
(69) (123)
(73) (131)
(80)
7.50 R 16 C HSO + SAND 112/110 N 8 N 140 TT F C 3 76 5.00 230 208 200 112 S 1725 1830 1935 2035 2135 2240
5.50 236 213 205 110 D 3265 3465 3660 3855 4050 4240
6.00 242 218 818 210 802 369 2430
6.50 247 224 215
4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0
(65) (73) (80) (87) (94) (102) (109) (116) (123) (131)
2 05/70 R 15 HTR 124/122 K 14 K 110 TT D C 1 70 5.00 228 206 198 124 S 2090 2255 2420 2580 2735 2895 3045 3200
5.50 233 211 681 203 669 313 2040 122 D 3920 4235 4540 4840 5135 5425 5715 6000
6.00 240 217 209
6.50 246 223 214
7.50 R 15 HTR 135/133 G 16 G 90 TT D C 1 70 5.00 232 212 202 135 S 2850 3075 3295 3515 3730 3940 4150 4360
(134/132 K) (K 110) 5.50 238 217 207 134 S 2770 2990 3205 3420 3630 3835 4035 4240
6.00 244 223 784 212 773 357 2342 133 D 5385 5815 6235 6645 7050 7450 7845 8240
6.50 250 228 217 132 D 5230 5645 6050 6450 6845 7235 7620 8000
8.25 R 15 HTR 143/141 G 18 G 90 TT C C 1 70 5.50 253 235 224 143 S 3560 3845 4120 4395 4665 4930 5190 5450
(141/140 K) (K 110) 6.00 259 240 229 141 S 3365 3635 3895 4155 4405 4655 4905 5150
6.50 265 246 848 234 835 383 2530 141 D 6735 7270 7795 8310 8815 9315 9810 10300
7.00 270 252 240 140 D 6540 7055 7565 8065 8560 9045 9525 10000
7.00 R 16 LSR + 117/116 L 12 L 120 TT E C 1 70 5.50 228 206 799 198 784 362 2376 117 S 2220 2395 2570
6.00 235 212 204 116 D 4320 4660 5000
LDR + 117/116 L 12 L 120 TT E C 2 72
Tyre size Operating code EU tyre Rim Tyre Load capacity (kg) per axle at inflation
label dimensions pressure 6)
3)
(bar) (psi)
Rolling
Min. Rolling
Max. standard Stat. circum-
dis- Max. standard Stat. circum-
value in service Design value radius ference
Speed tance value in service Design value radius ference
index
Index be-
and ref. tween Outer- Tyre
speed TT/ Rim- rim Outer- Width Ø fit- 4.5
4.5 5.0
5.0 5.5
5.5 6.0
6.0 6.5
6.5 7.0
7.0 7.5
7.5 8.0
8.0 8.5
8.5 9.0
9.0
3) 4) 5)
Pattern LI/SI
1)
PR (km/h) TL 2) K N G width centres Width Ø +1% ± 1 % ± 1.5 % ± 2 % LI
1)
ment (65)
(65) (73)
(73) (80)
(80) (87)
(87) (94)
(94) (102) (109)
(102) (109) (116)
(116) (123)
(123) (131)
(131)
3 65/80 R 20 HTR 160/ - K 20 K 110 TL C C 1 70 10.00 379 1116 364 1092 502 3331 160 S 5620 6065 6505 6935 7360 7775 8190 8595 9000
3 65/85 R 20 HCS 164/ - J 22 J 100 TL – – – 10.00 379 1152 364 1128 518 3440 164 S 6865 7405 7940 8465 8985 9495 10000
3 95/85 R 20 HCS 168/ - J 20 J 100 TL – – – 10.00 401 1206 386 1180 540 3599 168 S 7685 8295 8895 9485 10065 10635 11200
(166/ - K) (K 110) 166 S 7275 7850 8420 8975 9525 10065 10600
10.00 R 20 RT 4 146/143 K 16 K 110 TT E C 2 73 6.50 305 276 265 146 S 4115 4445 4765 5080 5390 5695 6000
7.00 311 281 270 143 D 7480 8075 8655 9230 9795 10350 10900
HSR 146/143 K 16 K 110 TT D C 2 73 7.33 314 284 273
7.50 316 286 1074 275 1052 485 3209
8.00 322 291 280
11.00 R 20 HSR 150/146 K 16 K 110 TT C C 2 73 7.33 321 290 279 150 S 4380 4725 5070 5405 5735 6060 6380 6700
7.50 323 292 281 146 D 7845 8470 9080 9680 10270 10855 11430 12000
8.00 329 297 1104 286 1082 498 3300
8.50 335 303 291
9.00 340 308 296
12.00 R 20 HSR 154/150 K 18 K 110 TT C C 2 73 7.33 346 307 301 154 S 4905 5290 5675 6050 6420 6785 7140 7500
8.00 353 313 307 151 D 9475 10225 10960 11685 12400 13105 13800
HSC 154/151 K 18 K 110 TT C C 2 71 8.50 360 319 1146 313 1122 515 3422 150 D 8760 9455 10140 10810 11470 12120 12765 13400
9.00 366 324 318 149 D 8500 9175 9835 10485 11125 11760 12380 13000
HDC 154/150 K 18 K 110 TT E C 2 76
14.00 R 20 HSO SAND 160/157 K 18 K 110 TL – – – 9.00 414 367 360 166 S 7275 7850 8420 8975 9525 10065 10600
Vehicle Tyres
Commercial
HSO SAND 160/157 K 18 K 110 TT – – – 160 S 6875 7420 7955 8480 9000
160 D 12355 13335 14295 15245 16175 17090 18000
HCS 164/160 K 22 K 110 TL – – – 157 D 12605 13600 14585 15550 16500
(166/160 G) (G 90)
3 25/95 R 24 HSR 1 162/160 K 18 K 110 TT C D 2 73 8.50 368 326 320 162 S 6210 6705 7185 7665 8130 8590 9050 9500
(12.00 R 24) 9.00 374 332 1252 325 1228 568 3745 160 D 11770 12705 13620 14520 15410 16280 17145 18000
HSC 1 162/160 K 18 K 110 TT D D 2 73 10.00 385 342 335
Vehicle Tyres
Commercial
This has a decidedly negative effect on the tyre’s coaches and Austria for coaches) regrooving
suitability for remolding. of front axle tyres for coaches is prohibited. In
general, regrooving on front axle coach tyres is
The best time for regrooving is when the tread is not recommended.
worn down to about 3 mm. The tyre must then be
checked to make sure the wear is even all round. All Continental tyres on which regrooving is
Attention should be paid to local or uneven wear permitted are marked “regroovable“.
patches.
7.00 R 16 1.5 7 10.00 R 20 3.5 7-8 205/70 R 15 1.5 7-8 365/80 R 20 3.5 7-8
Segment Construction
HSC 1 HDC 1
B A B B A B
B A B A B
12.00 R 20 3.0 10-12 12.00 R 20 3.5 10-12 7.5 R 16 C 1.5 5 365/85 R 20 4.0 A:18 B:10
The prerequisite for successful maintenance and Always use new rubber tubeless valves or new Fitting the wheel on to the vehicle The use of different tyre designs on each axle
care is the correct choice of tyre, in accordance inner tubes and flaps on new tyres or new seals Vehicle axle data such as toe-in, king pin incli should be a rare exception. Where vehicles are
with the recommendations of the tyre manufac for tubeless metal valves. nation and castor as well as axle alignment must being used on the highway, minimum tread depths
turer. Refer also previous sections on this subject. be checked and if necessary adjusted to within as specified in the latest national regulations
Take special care after tyre repairs: inner tubes tolerances. must be observed. For motor vehicles, trailers or
Storage stretch in use and may form dangerous folds when semitrailers it is essential that tyres of the same
Unused tyres should be stored in cool, dry, dark re-fitted. If in doubt, always fit new inner tubes in Only then should the wheel be fitted. construction are fitted to the same axle.
and lightly ventilated rooms. Tyres which are order to avoid tube failure.
not fitted on rims should be stored standing up. When fitting make sure that the axle hub is per- Minimum tread depth
Avoid contact with fuel, lubricants, solvents and It is particularly important with large tyres that fectly centered. Extra care is necessary with large, The legal minimum tread depth is 1.0 mm and
chemicals. these should already fit on the rim flange with heavy tyres which do not have special centering. must cover the complete width and circumference
as little inflation pressure as possible. See also of the tread. The depth should be measured in
Should tyres, tubes and bead flaps need to be WdK-Guideline 104, where detailed fitting If necessary, re-balance the wheel when it is fitted the tread groove with the tread wear indicator
stored temporarily, they may age more quickly recommendations are given. on the vehicle. (the area with the indicator should not be taken).
and develop cracks if they are exposed to intense
sunlight or extreme heat. Effective air circulation As a guide: Always remember to check that the valves move Vehicle in operation
accelerates this process. When fitting, do not exceed 150% of the maxi freely and are easily accessible. Valve extensions The inflation pressure must be correct. Otherwise
mum standard inflation pressure. Under no are necessary for dual tyres. poor vehicle handling and pronounced, irregular
Inner tubes may be particularly affected if their circumstances must 10 bar be exceeded. Use tread wear are inevitable.
packaging is damaged. only recommended fitting tools and equipment. Checking the inflation pressure requires the free
movement and easy access of the valves, even If pressure is insufficient, the rolling resistance will
Fitting the tyre Should the tyre bead be jammed on the rim and when they have become dirty during operation. increase and with it the fuel consumption. Hidden
Before taking off a tyre, unscrew and remove the the pressure be high, the bead may get damaged defects in the tyre may also occur which later lead
valve insert; then wait until all the air has escaped. or even destroyed. Valve caps, preferably high pressure type, must to tyre failure.
If a tube-type tyre is fitted with an angled valve as be fitted.
per DIN 7786-80 GD 80, unscrew the valve stem With tube type tyres, check that valves still move
and wait until the escaping air ceases to make freely after the filler nozzle has been removed. On rolling road testers where the vehicle perfor-
noise before removing the tyre. This is important for later inflation pressure mance is examined, restrictive testing regulations
checks under difficult conditions. must be observed: depending on the roller diame-
Particular care should be taken when fitting the ter only short tests may be carried out and these
tyre. Only rust-free rims of the right size should be Fast-running wheels should be balanced statically must always below maximum speed.
used. These should not be damaged or show any and dynamically to ensure smooth running.
signs of wear and tear. The loose flange side If a vehicle has all the same type of tyres e.g. radial
should be examined with great care. tyres, this will guarantee optimum driving charac-
teristics and maximum driving stability.
Maintenance
and care
Technical Data Book Maintenance and care 118 119
Tyre inflation pressures specified by vehicle and Maintenance and care of the vehicle’s tyres Unfavourable weather conditions also accelerate The tyre is then driven underinflated and conse-
tyre manufacturers are contained in the vehicle The high quality standard of the tyres and vehicle, the ageing process as well as the storage condi- quently subjected to excessive strain. All these
manual and, for example, on the vehicle mud which is achieved by the measures and recom- tions that were covered in the previous section. factors can make a tyre non-repairable by the time
guard. These may vary with different loads and mendations stated above, can only be ensured by the damage is finally discovered. If the tyre is
service conditions, and must be adjusted before the regular checking of all factors. An expert should always be called in to make a repaired regardless, even if it is repaired by a repu
commencing a journey. Specified inflation pres- qualified judgment on the tyres. table tyre specialist, it is possible that tyre failure
sures always apply to cold tyres. An increase in For example, pressure checks and external inspec- can still occur as a result of an overstrained area,
inflation pressure during running is normal tions of the tyres (including the sidewalls to the Regrooving of the tread pattern – usually when other than that originally damaged.
and must never be re-adjusted. Do not reduce inside of the vehicle and between dual tyres). there are 2 or 3 millimetres of tread depth left –
pressure when the tyres are hot. should be carried out only by qualified experts This is why each tyre must be carefully inspected
Pressure checking devices and small replacement when the word “REGROOVABLE” is displayed on by a tyre expert before it is repaired. For only a
Never use different inflation pressures for the parts such as valve inserts, caps and extensions the tyre sidewall. specially trained person can decide whether it is
same axle. should always be close at hand. possible to repair the tyre and whether the tyre will
Tyre repairs be capable of delivering safe performance after
The spare wheel should be inflated to at least the Tyres age as a result of physical and chemical Tyre damage may initially be just a question of the repair. Repairs must be carried out by an
maximum inflation pressure given in the vehicle processes and this may impair their performance. damage to the outer rubber: however, this appar- authorised workshop, which is then responsible
manual. Remember to always include the spare ently superficial damage can eventually extend for inspecting the tyre and for doing the job properly.
wheel when checking inflation pressures. Tyres, which are fitted to mainly stationary down to, or into, the tyre’s reinforcing materials
vehicles or those which are not used regularly, (casing/belt). Therefore no time should be lost in Repairs to the wheels are forbidden.
A balanced, even style of driving reduces the are particularly prone to premature ageing. taking the tyre to a specialist for assessment as
strain on the tyres. Every hasty reaction on the soon as any external damage is detected.
accelerator, brakes or steering shortens the life
of the tyres. Damage to the reinforcing materials, for instance
due to a nail puncture or a deep cut, is particularly
The same also applies of course to all other forms dangerous because dirt and moisture may pene-
of peak strain such a severe scuffing of the tyre trate during the time between when the damage
along the kerb or driving over obstacles that may occurred and when it was detected. This may even
be in the road. These can all result in damage to result in more serious damage to the reinforcing
the tyres construction. materials. Damage to the inside of a tyre can also
cause a slow puncture.
Strain on the tyre should be avoided. This has
the same effect as insufficient pressure.
Maintenance
and care
120
Technical Data Book Imprint 121 122
Technical data manuals for other tyre groups: Load Index Maximum standard value in service
The nominal load carrying capacity of a tyre This is the maximum permissible width in
Tyres for passenger cars and vans: is expressed as the Load Index (LI) and is ex- accordance with the ETRTO Standard.
Technical Data Book Car, 4x4, Van Tyres pressed in kg. In addition to this, a maximum Dynamic deformations are not included.
speed is also determined in connection with
Industrial-tyres: the nominal load carrying capacity (refer to Design value
Tyre Service Data Industrial Vehicles speed symbol). Width and external diameter as provided
by the manufacturer
Motorcycle tyres: Speed symbol and maximum speed (km/h)
Technical Manual Motorcycle tyres A speed symbol (SI) is used to designate the Stat. radius
speed rating of a tyre. The speed rating Distance from the centre of the wheel to
The content of this publication is provided for consequential or punitive damages arising out of indicates the maximum speed assigned as the road surface
information only and without responsibility. the use of this publication. Information contained per nominal load capacity of the tyre.
Continental Reifen Deutschland GmbH makes no herein is not intended to announce product avail- Rolling circumference
representations about the accuracy, reliability, ability anywhere in the world. PR (obsolete) The distance covered on each revolution
completeness or timeliness of the information in „Ply-rating“ (also called „PR“), was an interna- of the tyre
this publication. Continental Reifen Deutschland The trademarks, service marks and logos (the tional designation for the solidity of the tyre
GmbH may, in its sole discretion, revise the infor- Trademarks) displayed in this publication are the casing. In the past, the tyre load-carrying Tyre fitment
mation contained herein at any time without property of Continental Reifen Deutschland GmbH class was only expressed by means of a Describes single (S) or dual fitment (D)
notice. Continental Reifen Deutschland GmbH’s and/or its affiliates. Nothing in this publication PR number. The exact designation of load
obligations and respons ibilities regarding its should be construed as granting any license or carrying capacity is nowadays expressed Load carrying capacity in kg per axle at an
products are governed solely by the agreements right to the Trademarks. Without the express as a numerical code, namely the Load Index inflation pressure in bar or psi
under which they are sold. Unless otherwise written consent of Continental Reifen Deutschland (or LI). Axle load carrying capacities with single or
agreed in writing, the information contained GmbH the use of the Trademarks is prohibited. dual fitment at an adjusted inflation pressure
herein does not become part of these agreements. All text, images, graphics and other materials in TT/TL in bar and psi (1 bar ~ 14.5 psi)
this publication are subject to the copyright and Tubeless – tyres without inner tube
This publication does not contain any guarantee other intellectual property rights of Continental Tube Type – tyres with inner tube
or agreed quality of Continental Reifen Deutsch- Reifen Deutschland GmbH and/or its affiliates.
land GmbH’s products or any warranty of mer- Continental Reifen Deutschland GmbH owns Minimum distance between rim centres
chantability, fitness for a particular purpose and the copyrights in the selection, coordination and Adherence to the minimum distance
noninfringement. Continental Reifen Deutschland arrangement of the materials in this publication. between rim centres ensures the fault-free
GmbH may make changes in the products or These materials may not be modified or copied performance of two tyres in accordance
services described at any time without notice. for commercial use or distribution. with the ETRTO Standard without chains,
This publication is provided on an “as is” basis. when mounted dually (refer also to page 5).
To the extent permitted by law, Continental Reifen Copyright © 2018
Deutschland GmbH makes no warranty, express Continental Reifen Deutschland GmbH
or implied, and assumes no liability in connection All rights reserved. Explanation of footnotes
Data acc. to DIN 7805/4, WdK Guidelines 134/2, 142/2, 143/14, 143/25 5) External rolling noise (db)
with the use of the information contained in this 1) Load index single/dual wheel fitment and speed symbol 6) For tyre pressures of 8.0 bar (116 psi) or greater,
publication. Continental Reifen Deutschland GmbH 2) TT = Tube Type, TL = Tubeless use valve slit cover plate
3) Fuel efficiency * in preparation
is not liable for any direct, indirect, incidental, 4) Wet grip ** Label values in preparation
123 124
Product overview
30165 Hannover
Germany
www.continental-truck-tyres.com
www.continental-corporation.com