Scribd
Upload
236 views4 pages

CRD RTU Formulation PDF

This document summarizes two formulations of a contact and reactive adhesive (CRD). One formulation is for bonding high viscosity materials like wood, metal, and stone to various substrates. It contains Dispercoll polymers and has a high viscosity of over 100,000 cps. The second formulation is for bonding foam materials and can be applied via spray. It contains different Dispercoll polymers and Nanobyk additive and has a lower viscosity of 900 cps. Both formulations provide initial bonding within an hour and full bonding within 24 hours for the high viscosity formulation and 18 hours for the foam formulation.

Uploaded by

Pamela Villanueva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
236 views4 pages

CRD RTU Formulation PDF

This document summarizes two formulations of a contact and reactive adhesive (CRD). One formulation is for bonding high viscosity materials like wood, metal, and stone to various substrates. It contains Dispercoll polymers and has a high viscosity of over 100,000 cps. The second formulation is for bonding foam materials and can be applied via spray. It contains different Dispercoll polymers and Nanobyk additive and has a lower viscosity of 900 cps. Both formulations provide initial bonding within an hour and full bonding within 24 hours for the high viscosity formulation and 18 hours for the foam formulation.

Uploaded by

Pamela Villanueva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

CRD formulation update

Application :
 High visco for multi substrates & HPL
 Spray CRD for foam to foam

covestro.com October 19 │ Presentation Title 1


CRD formulation
Ingriedients For HPL & multi substrate For foam to foam
Dispercoll C 2694/1 69.4
Dispercoll C 84
Dispercoll C 2372/1 37.6
Dispercoll C 74 37.6
Nanobyk 3840 (50% sol) 3.2
S 3030/1 21.5
Revacryl 4522 27.78
Aquaflow NHS
50% Sol Borchigel ALA 2.78
Glycine powder Glycine 3 gr No pH adjustment
Total 101.9 99.96
Properties 2 4
NV (% w/w ) 49.13 43.75
Viscosity ( cps ) > 100 000 900 cp/l2/30 rpm
pH 9 8
Gramature ( gr/m2 ) 200-250 100 - 150
Application 2 sides by scrapper 2 sides by spray.
Flash off time @RT 3' 1 min
Initial bonding 1 hr 4'
Final bonding 24 hrs 18'
Substrates Wood, GRC, Tin plate, Many types of foam &
Wood, Al foil,HPL Textile
Note HPL & Multi substrates Spray ADH for foam to
foam.
Storage stability In progress In progress

2 October 19 │ Presentation Title


Application Method

Application is Flash off Press


for 2 sides of (1 minutes at substrates
substrate room manually, and
temperature for then check for
Coating weight spray) initial & final
for spray : 100 – bonding
150 gsm (3 – 5 ‘ minutes
at room
Coating weight temperature for
for scrap : 200 – spray)
250 gsm

3 October 19 │ Presentation Title


Thank you

4 October 19 │ Presentation Title

You might also like