Scribd
Upload
214 views2 pages

Debrick

1. The document provides step-by-step instructions for fixing a bricked Asus Zenfone 5 device with no partitions or recovery. It details downloading drivers and firmware files, renaming files, flashing partitions via fastboot, and reflashing the stock firmware via recovery to fully revert the device to a working state.

Uploaded by

Shiela Mae Samson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
214 views2 pages

Debrick

1. The document provides step-by-step instructions for fixing a bricked Asus Zenfone 5 device with no partitions or recovery. It details downloading drivers and firmware files, renaming files, flashing partitions via fastboot, and reflashing the stock firmware via recovery to fully revert the device to a working state.

Uploaded by

Shiela Mae Samson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Few days back, I bricked my zen5 with no droidboot and recovery. I even had no partitions.

This is
how i fixed mine and reverted back to stock.
Note: If you need to fix the fastboot/droidboot/bootloader only, then proceed upto step 15 but you
need to get the right fastboot.img file from the firmware.

1. Before you begin, u should prepare your pc with the required drivers.


2. Dowload USB driver and install: https://software.intel.com/en-us/and...ndroid-devices
3. Dowload and install iSocUSB driver: http://www.mediafire.com/download/7u...etup-1.0.4.exe
4. Download this fastboot-
2.19.img.pos.bin file: http://www.mediafire.com/download/6i...19.img.pos.bin
5. Download this and unzip: https://drive.google.com/file/d/0B3v...VTYmFVcXc/view
6. Copy fastboot-2.19.img.pos.bin file to Asus Zenfone 5 A500CG Debrick folder.
Search droidboot.img.POS_sign.bin file in the folder and delete it. Rename fastboot-
2.19.img.pos.bin to droidboot.img.POS_sign.bin.
7. Copy fastboot-2.19.img.pos.bin file to Asus Zenfone 5 A500CG Debrick folder again.
Search droidboot_sign.bin file in the folder and delete it. And again rename fastboot-
2.19.img.pos - Copy.bin to droidboot_sign.bin. The
existing droidboot.img.POS_sign.bin and droidboot_sign.bin files didn't work for me so I had to
replace it with proper file.
8. Download UL-ASUS_T00F-WW-2.21.40.30-user.zip firmware for your specific
SKU(WW/TW/CN/CHT) and copy to Asus Zenfone 5 A500CG
Debrick folder: https://www.asus.com/id/support/Down...Hp1VKV4Rdz/32/
9. Copy and paste the fastboot.img, boot.img, recovery.img files from the firmware to Asus
Zenfone 5 A500CG Debrick folder.
10. Now the process begins. Turn off your device. Lolz, make sure you turn it off. Sometimes it's
very confusing to identify whether it's on or off.
11. Keep on pressed the volume down key and connect USB cable. Your PC should get
the device in Cloverview mode. If not, install the above drivers again.
12. When the device is connected as Cloverview, release volume down key and
run Debrick.bat in Asus Zenfone 5 A500CG Debrick folder. You should see some dots, then a big
number, then again dots, and then some commands with xfstk........
13. Force turn off the device. Reboot to bootloader(Vol up+Power) and
run sec_offline_update_image.cmd in Asus Zenfone 5 A500CG Debrick folder. It will fix your
partition table. Let it reboot, if not, force a reboot. For me, it booted properly but
my touch screen was not working. If you face the same, don't worry.
14. Reboot to bootloader again and open CMD in Asus Zenfone 5 A500CG Debrick folder and run
Code:
fastboot flash fastboot fastboot.img
fastboot reboot-bootloader

15. Now your fastboot is fixed.


16. Run
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img

This will fix your boot and recovery.


17. We have flashed fastboot, boot, and recovery for 2.21.40.30 but the system is not flashed yet.
18. You have everything fixed so start with the process to re-flash UL-ASUS_T00F-WW-2.21.40.30-
user.zip firmware.
19. Reboot to bootloader by Vol up + Power button pressed.
20. Select recovery to reboot to recovery.
21. Select wipe user data and wipe cache.
22. Select apply update with adb and run
Code:
adb sideload UL-ASUS_T00F-WW-2.21.40.30-user.zip

23. After it's flashed successfully, reboot.

24. Hit  Thanks! Lolz

25. You just debricked. 

You might also like