The document reports conductivity meter readings over time for a batch reactor experiment conducted at different temperatures. Sodium hydroxide and ethyl acetate were mixed in a 1:1 molar ratio in a 1L reactor volume. Conductivity was measured every 15 seconds for 30 minutes at temperatures of 30°C, 35°C, and 40°C. Conductivity decreased over time for each temperature as the reaction progressed.
The document reports conductivity meter readings over time for a batch reactor experiment conducted at different temperatures. Sodium hydroxide and ethyl acetate were mixed in a 1:1 molar ratio in a 1L reactor volume. Conductivity was measured every 15 seconds for 30 minutes at temperatures of 30°C, 35°C, and 40°C. Conductivity decreased over time for each temperature as the reaction progressed.
The document reports conductivity meter readings over time for a batch reactor experiment conducted at different temperatures. Sodium hydroxide and ethyl acetate were mixed in a 1:1 molar ratio in a 1L reactor volume. Conductivity was measured every 15 seconds for 30 minutes at temperatures of 30°C, 35°C, and 40°C. Conductivity decreased over time for each temperature as the reaction progressed.
The document reports conductivity meter readings over time for a batch reactor experiment conducted at different temperatures. Sodium hydroxide and ethyl acetate were mixed in a 1:1 molar ratio in a 1L reactor volume. Conductivity was measured every 15 seconds for 30 minutes at temperatures of 30°C, 35°C, and 40°C. Conductivity decreased over time for each temperature as the reaction progressed.