EST No- 2

URVI ENTERPRISES
ESTIMATE
COSTRUCTION OF OFFICE BLOCK (15.23MX7.5M (G+1)) INCLUDING PORTICO

Sl.
No. Description of work Unit Qty Rate Amount

I CIVIL WORKS
1 Earthwork excavation for foundation of buildings, water supply, sanitary lines and
electrical conduits either in pits or in trenches in hard soil including dressing the
bottom and sides of pits and trenches, stacking the excavated soil clear from
edges of excavation with all lead & lift, after breaking of clods complete as per
specifications. (with all leads and lifts and as directed by the Engineer-in-charge.

Total CUM 80.00 206.96 16556.80

2 : Providing and laying in position plain cement concrete of mix 1:4:8 (M - 7.5 )
using 40 mm and down size graded granite/Trap/Basalt metal, machine mixed,
concrete laid in layers not exceeding 15 cms. Thick, well compacted, in
foundation including cost of all materials,labour, HOM of machinery, curing
complete as per specifications. (Specification No. KBS 4.1, 4.2)

Grand total=(i)+(ii) cum 26.00 4105.92 106753.92

3 Providing two bulb under reemed pile foundation upto maximum 5 mtr. Depth
including hire charges of machineries angling the pile holes, labour charges and
laying 20mm and down size jelly RCC (1:1.5:3) keeping the reinforcement eage
curing etc., complete as per IS specifications No. 2911 (Excluding cost of steel
and fabrication charges) with all lead and lift loading and unloading , labour, hire
charges of machineries etc., complete for 30cms diameter Mtr 50.00 1200.00 60000.00
4 Providing and laying in position reinforced cement concrete of nominal mix
1:1.5:3 (M - 20) with 20 mm and down size graded metal, machine mixed,
concrete laid in layers not exceeding 15 cms. thick, vibrated for all works in
foundation plinth and ground floor level for roof slab, staircase, lintels, retaining
walls, return walls, walls (any thickness) including attached plasters, columns,
piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, plain window cills, fillets etc., including cost of all
lead & lift, materials, labour, HOM of machinery, curing complete as per
specifications. (Specification No. KBS 4.1, 4.6)

PILE CAP CUM 4.55 5332.08 24260.96

5 Providing and laying in position reinforced cement concrete of nominal mix

1:1.5:3 (M - 20) with 20 mm and down size graded metal, machine mixed,
concrete laid in layers not exceeding 15 cms. thick, vibrated for all works in
foundation plinth and ground floor level for roof slab, staircase, lintels, retaining
walls, return walls, walls (any thickness) including attached plasters, columns,
piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, plain window cills, fillets etc., including cost of all
lead & lift, materials, labour, HOM of machinery, curing complete as per
specifications. (Specification No. KBS 4.1, 4.6)

Pedestal /COLUMN CUM 6.00 5332.08 31992.48

1
Sl.
No. Description of work Unit Qty Rate Amount

6 Providing and laying in position reinforced cement concrete of nominal mix

1:1.5:3 (M - 20) with 20 mm and down size graded metal, machine mixed,
concrete laid in layers not exceeding 15 cms. thick, vibrated for all works in
foundation plinth and ground floor level for roof slab, staircase, lintels, retaining
walls, return walls, walls (any thickness) including attached plasters, columns,
piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, plain window cills, fillets etc., including cost of all
lead & lift, materials, labour, HOM of machinery, curing complete as per
specifications. (Specification No. KBS 4.1, 4.6)

BEAMS CUM 8.00 5332.08 42656.64

7 Providing and constructing granite / trap / basalt rubble stone masonry in

foundation with Cement mortar 1:6, stone hammered dressed in courses not
less than 20 cms high, bond stone at two m. apart in each course including cost
of materials, labour, curing (Specification No. KBS 5.1.13) etc. complete with all
leads and lifts and as directed by the Engineer-in-charge.

Grand net qty cum 30.00 2307.76 69232.80

8 : Providing and laying in position plain cement concrete of mix 1:3:6 (M - 10)
using 20 mm and down size graded granite/Trap/Basalt metal, machine mixed,
concrete laid in layers not exceeding 15 cms. Thick, well compacted, in
foundation and plinth, including cost of all materials,labour, HOM of machinery,
curing complete as per specifications. (Specification No. KBS 4.1, 4.2)

Plinth Course
Total cum 4.50 4583.28 20624.76
9 Filling avaibale excavated earth (excluding rock)in sides of fuondations up to
plinth in layers not exceeding 20cm in depth,compacting each deposited layer by
raming after watering with lead up to 0M the lift up to 1.5M including cost of all
materials,labour complete as per specifications.
Filling with available earth
Total available earth used CUM 50.00 92.56 4628.00

10 : Providing and laying in position reinforced cement concrete of nominal mix

1:1.5:3 (M - 20) with 12 mm and down size graded metal, machine mixed, well
compacted for plain Chajja of 7.5 cms. average thickness, upto ground floor
level including cost of all materials,labour, HOM of machinery, curing complete as
per specifications.
chajja
Total sqm 9.00 399.36 3594.24

11 Providing and laying in position reinforced cement concrete of nominal mix

1:1.5:3 (M - 20) with 20 mm and down size graded metal, machine mixed,
concrete laid in layers not exceeding 15 cms. thick, vibrated for all works in
foundation plinth and ground floor level for roof slab, staircase, lintels, retaining
walls, return walls, walls (any thickness) including attached plasters, columns,
piers, abutments, pillars, posts, struts, buttresses, string or lacing courses,
parapets, coping, bed blocks, plain window cills, fillets etc., including cost of all
lead & lift, materials, labour, HOM of machinery, curing complete as per
specifications. (Specification No. KBS 4.1, 4.6)

ROOF SLAB
Total cum 20.00 5332.08 106641.60

2
Sl.
No. Description of work Unit Qty Rate Amount

12 Providing Fe-500 steel reinforcement for R.C.C. work including straightening,

cutting, bending, hooking, placing in position, lapping and / or welding wherever
required, tying with binding wire and anchoring to the adjoining members
wherever necessary complete as per design (laps and wastage shall not be Rmt
measured and paid) cost of materials, labour, HOM of machinery complete as per
specifications. (Specification No. KBS 4.6.3)

q 35.00 6248.32 218691.20

13 Providing and removing centering, shuttering, strutting, propping etc., and

removal of form work for foundations, footings, bases of columns, roofs landings,
columns, pillars, circular or curved, sides and soffits of beams, beam haunchings,
lintels & Chajja, cills, plinth, and staircase steps, suspended floors, roofs,
balconies including cost of all materials, labour complete as per specification.

Column Footing Sqm 10.00 196.55 1965.50

Pedestal /wall sqm 25.00 300.5 7512.50
Lintels sqm 10.00 217.36 2173.60
Chejja sqm 15.00 400.00 6000.00
Roof beams G.Floor sqm 55.00 217.36 11954.80
ROOF SLAB sqm 120.00 306.8 36816.00
Stair case sqm 25.00 392.08 9802.00

14
Providing and constructing burnt brick masonry for basement and
superstructure with approved quality of non-modular bricks of standard size of
class designation 35 with cement mortar 1:6 including plaster mesh of 150mm
wide, cost of materials,curing, labour charges, scaffolding, curing complete up to
all heights complete as per the instruction of the Engineer in Charge

Net qty cum 30.00 4200 126000.00

15 Providing and fixing Gear type Gulvenised Iron ROLLING SHUTTERS of
approved quality made out of 18 gauge 75mm wide MS lathes of convex
corrugation with side guides of 10-12 gauge 75mm wide and bottom rail 200mm
height and 25mm width with interlocking arrangement for steel lathes by means
of alternate and clips suspension shaft with high tension coil type springs 2 nos.
locking arrangements, pulling hooks, 4 nos. handles and with MS top cover of 12
gauge including all fittings and accessories and painted with red oxide paint and
2 coats of synthetic enamel one paint etc., complete

ROLLING SHUTTERS
For Rolling Shutter Sqm 12.00 3800 45600.00

16 Providing and constructing precast concrete solid blocks with compressive

strength not less than 35 kg/sqm (Change to 200kg/Sqm) with cement mortar
1:4 masonry (quoin, jamb, closer blocks) with solid concrete blocks of size
40x15x10 cms. (lxbxh) comforming to I.S.:2185/1965 in superstructure including
cost of materials, labour charges, scaffolding, curing complete as per
specifications.

Brick Partition Walls

Net qty sqm 10.00 635.44 6354.40

3
Sl.
No. Description of work Unit Qty Rate Amount

17 Providing and fixing 65mm*90mm GRP Doorframe facbricated using E-Glass

Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic
resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe
consists of four segmens which are provided with plug-in-socket arrangement
in-situ in the mould. The segments are plugged in and are joined together by
means of screws. The GRP frame shall be provided with wooden reinforcement
of 6 locations fro high screw holding capacity for fixing metallic hold fast and
shall be consolidated by filling with medium density foam/plaster with fibre
reinforcement. Six numbers of 260mm*25mm*5mm size S shaped M.S. flat hold
fast shall be provided with the frame.(P.N0.64)

GRP Door frame for LAVATORY

Total RMT 30.00 447.20 13416.00

18 Providing and fixing factory made single leaft rigid GRP sandwich composite
door shutter of 32mm thick, laminated with two GRP skins with wood grain
finish, fabricated using U.V-stabilized Isopthalic gelcoat and on layer of 45gsm E-
Glass chopped strand Mat(CSM), impregnated with orthopthalic polyster resin.
the thickness of the skins shall not be less than 1.5mm/ Expanded
polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20
kg/m3 shall be used as core material. Wooden reinforcements made of
seasoned salwood block of cross section not less than 28mm*32mm and also
necessary salwood reinforcements for fixing the metal fittings such as tower
bolts, aldrops, handles etc shall be provided. a structural adhesive compatible
with EPS foam shall be used for bonding the core material, the salwood
reinforcement and the skins. the material and process for manufacturing the
door shutters shall confirm to RV/TIFAC Composites design centre standards and
specifications and the door shutters tested in confirmation to IS 4020-1994. The
finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other
colour using high quality pigments. Exclusing cost of fixtures and inclusive of
supply of shutters to respective work spot.

GRP Door shutters sqm 11.00 2995.20 32947.20

19 KSRB 7.11 : Providing and fixing in position anodized Aluminium Windows &
Ventilator as per approved drawings with sliding shutters using three track
window frame section of size 92 x 31.75 mm bottom section 1.3 mm thick,
weight 1.07 kg/m, sides and top sections 1.3 mm. thick weight 0.933 kg/m; and
shutter frame section comprising top and bottom section of size 40 mm x 18 mm,
1.25 mm thick 0.417 kg/m; shutter outer side 40 mm x 18 mm 1.25 mm thick
0.417 kg/m; shutter inter lock section 40 mm x 26.7 mm, 1.1 mm thick weight
0.469 kg/m. the shutter mounted on nylon rollers with approved quality of fixtures
such as aluminium handles tower bolts etc.; and providing and fixing 5.5 mm.
thick plain glass for shutter fitted with ruber beading aluminium sections anodised
12 to 15 microns, including cutting to required length, joints mitred subdividing the
frame tenonned and rivetted in the assembled frame stiffened with end clips at
corners angles etc., and fixed to the walls, lintels, floor beams / cills as the case
may be with necessary

steel screws, raul plugs, or teak wood gatties including cutting masonry or
concrete and making good the original surface using cement mortar, specification
etc., complete with all leads and lifts as directed by Engineer-in-charge.

sqm 21.00 3099.20 65083.20

4
Sl.
No. Description of work Unit Qty Rate Amount

20 Providing Vitrified tiles 60 cm x 60 cm of approved make, shade and size for

flooring laid on a bed of 12 mm thick, cement mortar 1:3 mix, flush pointing using
white cement, including cost of materials, labour,curing, etc complete with all
leads and lifts and as directed by the Engineer-in-charge.
Total sqm 250.00 1200 300000.00

21 Floring with 25 mm to 40mm thick polished tandur blue stone slabs using
cement mortor 1:6, 25mm thick over existing cement concrete bed or top of roof
laid to line and level and jointed with cement slurry mixed with pigment to match
the shade of the slab, including cost of materials, labour, curing, polishing
(Specification No. KBS) etc complete with all leads and lifts and as directed by
the Engineer-in-charge.

Stair case sqm 10.00 831.5 8315.00

22 Providing Ceramic tiles approved make, shade and size for flooring laid on a
bed of 12 mm thick, cement mortar 1:3 mix, flush pointing using white cement,
including cost of materials, labour,curing, etc complete with all leads and lifts and
as directed by the Engineer-in-charge.
Ceramic tiles
Lavatory block Sqm 20.00 849.68 16993.60

23 Providing internal cement plaster in CM 1:4 18mm thick in single coat using
approved sand including rounding off corners wherever required, smooth
rendering with neeru finish, curing, providing and removing scaffolding,
including cost of material and labour with all leads and lifts etc., complete at all
heights as directed.
Net qty Sqm 270.00 141.44 38188.80

24 KSRB 15.3.13 : Providing 12 mm thick cement plaster in Cement mortar 1:3

Ceiling including rounding off corners wherever required smooth rendering, :
Providing and removing scaffolding, including cost of materials, labour, curing
etc., complete with all leads and lifts and as directed by the Engineer-in-charge.

Total Sqm 120.00 147.68 17721.60

25 Providing external cement plaster in CM 1:4 20mm thick in two coats with
waterproof compound and using approved sand including rounding off corners
wherever required, with sponge finish, curing, providing and removing
scaffolding, including cost of material and labour with all leads and lifts etc.,
complete at all heights as directed.
External Plastering
Net qty sqm 160.00 167.44 26790.40

26 Providing lime rendering for plastering wall and ceiling including cost of
materials, labour, curing etc., complete with all leads and lifts and as directed by
the Engineer-in-charge.
Qty same as internal plaster & ceiling sqm 400.00 17.06 6822.40

5
Sl.
No. Description of work Unit Qty Rate Amount

27 KSRB 10.3 : Providing and laying integral cement based waterproofing

treatment including preparation of surface as required for treatment of roofs,
balaconies, terraces etc., consisting of following application. (a) Applying and
grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with
proprietary water proofing compound conforming to IS: 2645 over the RCC slab
after cleaning the surface beforetreatment. (b) Laying cement concrete using
broken brick bats 25 mm to 100 mm size with 50% of cement mortar 1:5 admixed
with proprietary water proofing compound conforming IS: 2645 over 20 mm thick
layer of cement mortar 1:5 admixed with proprietar water proofing compound to
required slope and treating similarly the adjoining walls upto 300 mm height
including rounding off junctions of walls and slabs. (c) After two days of proper
proper curing, applying a second coat of

cement slurry admixed with proprietary water proofing compound (d) Finishing
the surface with 20 mm thick jointless cement mortar of mix 1:4 admixed with
proprietary water proofing compound and finally finishing the surface with trowel
and neat cement slury and making of 300 x 300 mm square (e) The whole
terrace so finished shall be flooded with water for a minimum period of two weeks
for curing and for final test including cost of materials, labour complete as per
specifications.

Lavatory slab
Total sqm 125.00 700.00 87500.00

28
Providing and applying two or more coats with Plastic Emulsion of approved
brand and shade on wall surface including priming coat with distemper primer
after throughly brooming the surface free from mortar drops and other foreign
matter including preparing the surface even and sand paper smooth, cost of
materials, labour, complete as per specifications.

Oil bound distemper

Qty same as lime rendering sqm 400.00 54.08 21632.00

29
Providing and finishing external walls in two coats with Apex ultima/ Acrylic
Paint of approved brand and shade to give an even shade after throughly
brooming the surface to remove all dirt and loose powdered material, free from
mortar drops and other foreign matter cost of materials, labour, complete as per
specifications.

Qty as per external plaster sqm 160.00 62.40 9984.00

TOTAL 1605206.40
Say Rs 1605200.0

6
 EST No- 3
#REF!
SECURITY & TIME OFFICE (8MX4M)
ESTIMATE
Tender
Item No Item Description Unit Total Qty Amount
Rate
1 Excavation for footing, machine fdn, plinth beams , wall footing, gutters,
tanks in Ordinary soil including removing the excavated stuff upto a
distance of 1500 m beyond battery limit area and stacking and /or
spreading as directed, shoring, strutting, dewatering wherever required
& preparing the bed as directed , including backfilling in layers, etc.

150.00 M3 35.26 5289.00

2 Same as above, but filling with contractor's murum brought from outside
including all all royalties etc. complete. Within a lead of 50m in factory
premisses
300.00 M3 65.00 19500.00

3 Providing dry trap rubble stone soling 23 cm thk. (compacted thickness),

hand packing, ramming, compacting etc. complete. Voids & inters to be
filled with approved filler material like murum etc. The voids not to
exceed 30% . The rate shall be for compacated thickness)

1,200.00 M3 4.54 5448.00

4 Providing and laying in situ Plain Cement Concrete 1:4:8 of trap metal
for foundation, floor bedding etc. including dewatering, formwork,
compacting and curing & placing etc. complete at all depths.

3,100.00 M3 7.61 23604.14

5 Providing and laying in situ Plain Cement Concrete 1:3:6 of trap metal
for foundation, floor bedding etc. including dewatering, formwork,
compacting and curing & placing etc. complete at all depths.

3,400.00 M3 0.46 1565.19

6 Providing and casting in situ cement concrete of M 20 grade concrete of

trap metal drawing and curing complete. RCC structures shall be Fare
Finish.
(Rate at all heights & levels (including cost of shuttering & Centering but
excluding cost of steel)

A) Footings/ rafts/foundation block/bed block 6,000.00 M3 2.16 12960.00

B) Columns / Pedestals 6,300.00 M3 3.02 19026.00

C) Plinth / Ground beam 6,500.00 M3 9.20 59787.00

D) Slab of all types. 6,700.00 M3 6.19 41456.25

E) Beams & lintels. 6,800.00 M3 1.24 8438.66

F) Chajja / canopy/ fins/brackets/portals. 550.00 Sqm 3.06 1683.00

7 Providing, fixing and laying in position TMT steel bar reinforcement of

dia. for R.C.C. work as per detailed designs, drawings & schedules or as
directed including straightening, cutting, bending, hooking the bars,
binding welding and supported as required, providing cover blocks
etc.complete with wires or (Rate at all heights & levels & including cost
of binding wire and / or welding rods ) IS Code 1786

a. TMT 58,480.0 MT 1.10 64518.41

C MASONARY ITEMS -

7
 Tender
Item No Item Description Unit Total Qty Amount
Rate
8 Providing & constructing U.C.R. masonry of trap stone in C.M. 1:6 in
foundation and plinth of walls including quions, corner stones and
headers, constructing in line & level, racking out joints on exposed
faces, scaffolding, watering, curing etc.(Headers to be marked with oil
paint before use and shall be one per every sqm.)
3,000.00 M3 10.30 30900.00

9 Providing and constructing burnt brick masonry for basement and

superstructure with approved quality of non-modular bricks of standard
size of class designation 35 with cement mortar 1:6 including cost of
materials, labour charges, scaffolding, curing complete as per
specifications. )

4,500.00 M3 14.36 64633.29

10 Providing & applying internal cement plaster to walls & ceilings

(minimum thickness 12 mm) in cement mortar 1:4 with Neeru finish to
concrete, stone or brick surface including roughening the concrete
surface, applying the base coat in line & level,curing scaffolding,
including cleaning,making of dhar, panni patti, groove etc. as required
complete at all heights, levels and
225.60 M2. 68.60 15476.72

11 Providing external cement plaster in CM 1:4 20mm thick in two coats

with waterproof compound and using approved sand including rounding
off corners wherever required, with sponge finish, curing, providing and
removing scaffolding, including cost of material and labour. (excluding
cost of Cement) etc., complete with all leads and lifts as directed by
Engineer-in-charge.

273.60 M2. 67.46 18455.69

12 Providing cement plaster in CM 1:4 12mm thick in single coat for

CEILING using approved sand including rounding off corners wherever
required, smooth rendering with neeru finish, curing, providing and
removing scaffolding, including cost of material and labour (excluding
cost of Cement) etc., complete with all leads and lifts as directed by
Engineer-in-charge.
285.00 M2. 20.00 5700.00

13 Providing vitrified tiles 60*60cms of approved make, shade and size for
flooring laid on a bed of 12mm thick cement mortar 1:3 mix, flush
pointing with white cement using colour pigment, including cost
materials, labour, curing complete as per specification. 1,200.00 M2. 21.92 26309.07

14 Providing Ceramic tiles of approved make, shade and size 30 cm x 30

cm for flooring, treads of steps and landing laid on a bed of 12 mm thick,
cement mortar 1:3 mix, flush pointing using white cement, including cost
of materials, labour,curing, complete as per specifications.
850.00 M2. 9.69 8236.50

G PAINTING AND FINISHING -

15 Providing applying and finishing with 2 coats of WATERPROOF

CEMENT PAINT approved brand and shade to give an even shade
after throughly brooming/ cleaning the surface free of mortar drops and
other foreign matter, including preparing the surface even and sand
paper smooth,incuding cost of materials, labour etc., complete as
directed etc.complete.

75.00 M2. 67.46 5059.13

16 Providing and applying oil bound distemper of approved make and

shade on all surfaces & at all heights in three coats including
scaffolding, preparing the surface by brushing and brooming down,
applying primer, palti and a coat of Birla white putty etc. complete. The
dry/wet cleaning of floors/pipes/glass etc after painting is to be carried
out.

85.00 M2. 68.60 5831.21

8
 Tender
Item No Item Description Unit Total Qty Amount
Rate
17 Providing fabricating assembling and fixing in position anodized
aluminium Window Frame & shutters using 47.62 x 44.45 mm section
thickness 3.18mm ,weight 1.505Kg./m for vertical frame; 47.62 x 44.45
thickness of 3mm, weight 1.42 kg./m for top section 49.91mm x
44.45mm with wall thickness of 3mm weight 1.495Kg. / mm for central
rail, and 114.3 mm x 44.45mm thickness 3.18mm , weight 2.646 Kg/
mm for bottom rail; alluminium sections anodized 12 to 15 microns and
cut to lenght joint meterd and corners granded, bottom rails and top rails
hinged or pivoted, opening arrangements including providing and fixing
standered aproved acceroies, such as alluminium handles, tower bolts,
lock, pivot; hinges

3,500.00 Sqm 6.00 21000.00

18 Providing fabricating assembling and fixing in position anodized

aluminium Door Frame & shutters using 47.62 x 44.45 mm section
thickness 3.18mm ,weight 1.505Kg./m for vertical frame; 47.62 x 44.45
thickness of 3mm, weight 1.42 kg./m for top section 49.91mm x
44.45mm with wall thickness of 3mm weight 1.495Kg. / mm for central
rail, and 114.3 mm x 44.45mm thickness 3.18mm , weight 2.646 Kg/
mm for bottom rail; alluminium sections anodized 12 to 15 microns and
cut to lenght joint meterd and corners granded, bottom rails and top rails
hinged or pivoted, opening arrangements including providing and fixing
standered aproved acceroies, such as alluminium handles, tower bolts,
lock, pivot; hinges

3,200.00 Sqm 5.25 16800.00

19 Providing and fixing M. S. Grill work for windows and ventilators

weighing 21kg/sqm using M.S. flats, or M.S. square rods or
combinations of M.S. flats and square roads as per approved design,
drawing including cutting steel sections and welding the same to
required pattern with a coat of red lead primer, cost of materials,
fixtures,labour and HOM of machinery etc., complete with all leads and
lifts as directed by Engineer-in-charge.
80 Kg 150.00 12000.00

20 Providing and fixing PVC Nahani trap of approved make conforming to

ISI specifications & construction of Cistern in CC 1:2:4 as per directions
(Rate is inclusive of cost of materials & fixtures and conveyance of
materials to work spot). -For 10cmsx 7.5cms.
250.00 No 1.00 250.00
21 Providing and fixing to wall,ceiling and floor PVC Pipes 6.00 kgf/ sq.cm
working pressure 110 mm out side diameter chemp plast/ Wavin or
equivalent make with pipe fttings, wall clips, making good the wall,
ceiling and floor, including shoes and cost of materials, labour charges,
HOM of equipments & testing complete as per specifications. (Sewage
Line)

300.00 Rmt 20.00 6000.00

Total Rs 503,427.26
Say Rs 503,000.00

9
 EST No- 4
#REF!
PARKING AREA
ESTIMATE
INo Item Description Rate Unit Total Qty Amount
1 Excavation for footing, machine fdn, plinth beams , wall footing, gutters,
tanks in Ordinary soil including removing the excavated stuff upto a
distance of 1500 m beyond battery limit area and stacking and /or
spreading as directed, shoring, strutting, dewatering wherever required
& preparing the bed as directed , including backfilling in layers, etc.

A) 0.00 - 1.50 m Depth 150.00 M3 95.00 14250.00

2 Same as above, but filling with contractor's murum brought from outside
including all all royalties etc. complete. Within a lead of 50m in factory
premisses
450.00 M3 125.00 56250.00

3 Providing dry trap rubble stone soling 23 cm thk. (compacted thickness),

hand packing, ramming, compacting etc. complete. Voids & inters to be
filled with approved filler material like murum etc. The voids not to
exceed 30% . The rate shall be for compacated thickness)

1,200.00 M3 125.00 150000.00

4 Providing and laying in situ Plain Cement Concrete 1:4:8 of trap metal
for foundation, floor bedding etc. including dewatering, formwork,
compacting and curing & placing etc. complete at all depths.

3,100.00 M3 38.75 120125.00

5 Providing, fixing and laying in position TMT steel bar reinforcement of

dia. for R.C.C. work as per detailed designs, drawings & schedules or as
directed including straightening, cutting, bending, hooking the bars,
binding welding and supported as required, providing cover blocks
etc.complete with wires or (Rate at all heights & levels & including cost
of binding wire and / or welding rods ) IS Code 1786

a. TMT 58,480.0 MT 1.38 80410.00

6 Providing and laying plain or reinforced cement concrete 1:1.5:3 for floor
in bays (including formwork providing joints and placing inserts, forming
pockets if required for m/c legs, columns etc. as per the drawings)
including levelling the concrete surface, providing Tremix treatment to
the cement concrete floor comprising of screed vibrating and levelling of
concrete surface, vacuum dewatering, bull floating and striking off,
power floating and power trowelling, curing by ponding for 14 days,
cleaning etc. complete. (The tremix concrete surface to be thoroughly
cleaned with washing, manual scraping of all the adhered dust, after the
curing is over and the concrete surface should be completely dry).VDF
(including cost of shuttering & Centering but excluding cost of
steel)

A. 200 mm thick concrete. 1,100.00 M2. 380.00 418000.00

7 Cutting grooves in concrete floor as per detailed

( Size - 6 x 15 mm ) 50.00 Rmt 65.00 3250.00
8 Providing and filling polysulphide joint filler of approved make Flexotex
-120 in expansion joints of RCC work, Concrete floor etc. including
cleaning the joint with wire brush, providing bond breaker whwrever
necessary, filling the joint with polysulphide sealent, sanding the same
properly to give proper level etc. complete. (Joint filling shall be carried
out as per manufacturer's instructions)

Groove size - 6 mm X 15 mm. 120.00 Rmt. 65.00 7800.00

Total 850,085.00
Say Rs 850,000.00

10
 EST No- 6
#REF!
LAND SCAPPING, SURVEYING & BACKFILLING
ESTIMATE
I Item Description Rate Unit Total Qty Amount
No
1 Excavation for footing, machine fdn, plinth beams , wall footing, gutters,
tanks in Ordinary soil including removing the excavated stuff upto a
distance of 1500 m beyond battery limit area and stacking and /or
spreading as directed, shoring, strutting, dewatering wherever required
& preparing the bed as directed , including backfilling in layers, etc.

A) 0.00 - 1.50 m Depth 150.00 M3 95.00 14250.00

2 filling with contractor's murum brought from outside including

COMPACTING TO 95% PD all all royalties etc. complete. Within a lead
of 50m in factory premisses
450.00 M3 100.00 45000.00

3 Providing dry trap rubble stone soling 23 cm thk. (compacted thickness),

hand packing, ramming, compacting etc. complete. Voids & inters to be
filled with approved filler material like murum etc. The voids not to
exceed 30% . The rate shall be for compacated thickness)

1,200.00 M3 50.00 60000.00

4 Same as above, but filling with contractor's BC Soil brought from outside
including all all royalties etc. complete. With all lead & lift.
1,200.00 M3 150.00 180000.00

5 Landscapping work, providing & fixing plantation at site as per client

requiement 50,000.00
6 Total station Survey for site area including plotting contour plan 21,200.00
Total 370,450.00
Say Rs 370,450.00
 EST No- 8
#REF!
CONSTRUCTION OFTOILET BLOCK (7M X3.5M)
ABSTRACT ESTIMATE

Sl.
Description Unit Qty. Rate Amount
No.

I EXCAVATION EARTH WORK

1 Earthwork Excavation for foundation and removing the excavated earth
to a distance not exceeding 50 M with a lift upto 1.50 M in all kinds of
soil strata.
CUM 40 100.00 4000.00
2 Earth work filling to the foundation & basement with available approved
earth, including watering & compaction in layers of 15 cm thick with a
lead of 50 M etc., complete.
CUM 15 80.00 1200.00
II CONCRETE WORK
3 Providing & laying concrete of proportion CC 1:4:8 using 40 mm &
downsize granite/trap/basalt clean approved hard graded metal for
FOUNDATION & FLOOR BED laid in layers not exceeding 15 cm in
thickness well compacted including curing with all lead & lifts complete
at all heights.
CUM 5 2800.00 14000.00
4 Providing & laying RCC of grade M-20 using granite/trap/basalt clean
approved hard graded metal of 20 mm and downsize with steel
plywood or plank centering, shuttering & form work including machine
mixing, vibrating curing & scaffolding with all leads & lifts etc.,
complete (excluding cost of steel & fabrication charges) for RCC
COLUMNS & BEAMS
CUM 1.5 5200.00 7800.00
6 Providing & laying RCC of grade M-20 using granite/trap/basalt clean
approved hard graded metal of 20 mm and downsize with steel
plywood or plank centering, shuttering & form work including machine
mixing, vibrating curing & scaffolding with all leads & lifts etc.,
complete (excluding cost of steel & fabrication charges) for RCC
SLAB

CUM 4 5500.00 22000.00

7 Providing & laying RCC of grade M-20 using granite/trap/basalt clean
approved hard graded metal of 20 mm and downsize with steel
plywood or plank centering, shuttering & form work including machine
mixing, vibrating curing & scaffolding with all leads & lifts etc.,
complete (excluding cost of steel & fabrication charges) for CHAJJAS
at all heights

SQM 6 400.00 2400.00

III MASONRY WORK
8 Providing constructing uncoursed rubble stone masonry with approved
sandstone's in CM 1:6 in courses not less than 15 cm high with bond
stones at 2 Mtrs. apart in each layer including curing with all leads &
lifts etc., complete in FOUNDATION & PLINTH &
SUPERSTRUCTURE.

CUM 15 2300.00 34500.00

9 Providing & fixing precast BRICK MASONRY for superstructure with
crushing strength not less than 35 Kg / cm 2 walls in cement mortar 1:6
including raking of joints, necessary scaffolding curing etc., complete.

CUM 18 3600.00 64800.00

IV STEEL
1
Sl.
Description Unit Qty. Rate Amount
No.
10 Providing & fabricating HYSD STEEL reinforcement confirming to IS
1786 of 1966 including shifting, cutting & binding, lapping wherever
required, placing in position, tying with binding wire of approved
quality & gauge as per design and drawing including cost of steel and
binding wire etc., complete at all heights. (laps & overlaps shall not be
measured & paid separately).

KGS 1000 60.00 60000.00

V DOORS, WINDOWS
11 Providing fabricating assembling and fixing in position anodized
aluminum Door Frame & shutters using 47.62 x 44.45 mm section
thickness 3.18mm ,weight 1.505Kg./m for vertical frame; 47.62 x 44.45
thickness of 3mm, weight 1.42 kg./m for top section 49.91mm x
44.45mm with wall thickness of 3mm weight 1.495Kg. / mm for central
rail, and 114.3 mm x 44.45mm thickness 3.18mm , weight 2.646 Kg/
mm for bottom rail; aluminum sections anodized 12 to 15 microns and
cut to length joint metered and corners granded, bottom rails and top
rails hinged or pivoted, opening arrangements including providing and
fixing slandered approved acceroies, such as alluminium handles,
tower bolts, lock, pivot; hinges

SQM 3.6 2600.00 9360.00

12 Providing and fixing M.S. WINDOWS & VENTILATORS as per design
and drawing with 4mm clear or frosted glass steel section should
confirm to IS 1038-1968. The item shall including all necessary iron
oxidized fixtures and fastening with 12mm square guards bars at 12cm
c/c straight or curved as per drawing including one coat of primer and
two coats of synthetic enamel paint with all leads and lifts etc., complete
at all heights.
SQM 3.51 2500.00 8775.00
VI PLASTERING & PAINTING
13 Providing external cement plaster in CM 1:4 20mm thick in two coats
with waterproof compound and using approved sand including
rounding off corners wherever required, with sponge finish, curing,
providing and removing scaffolding, including cost of material and
labour with all leads and lifts etc., complete at all heights as directed.

SQM 100 110.00 11000.00

14 Providing internal cement plaster in CM 1:4 20mm thick in single
coat using approved sand including rounding off corners wherever
required, smooth rendering with neeru finish, curing, providing and
removing scaffolding, including cost of material and labour with all
leads and lifts etc., complete at all heights as directed.

SQM 120 90.00 10800.00

15 Providing, applying and finishing with 3 coats of OIL BOUND washable
distemper paint of approved brand and shade including priming coat
with distemper primer after throughly brooming/ cleaning the surface
free of mortar drops and other foreign matter, including preparing the
surface even and sand paper smooth,incuding cost of materials, labour
etc., complete for INTERNAL WALLS as directed.

SQM 120 65.00 7800.00

2
Sl.
Description Unit Qty. Rate Amount
No.
16 Providing applying and finishing with 2 coats of WATERPROOF
CEMENT PAINT approved brand and shade to give an even shade
after throughly brooming/ cleaning the surface free of mortar drops
and other foreign matter, including preparing the surface even and
sand paper smooth,incuding cost of materials, labour etc., complete as
directed
SQM 100 60.00 6000.00
17 Providing straightening, cutting fabricating and erecting M.S.
STRUCTURAL STEEL in roof trusses, column, portal frames, beams,
bracing’s, platform, claddings, ladders, staircase, cleats, purlins,
protection angle, brackets, hangers, base plates, stiffeners plates, wind
bracing’s, tie rods insert plates, cable racks including wastage’s
welding, bolting wherever necessary, and painting with one coat of red-
oxide paint & two coats of approved synthetic enamel paint with all
leads & lifts etc., complete at all heights.
kg 250 70.00 17500.00
18 Providing Ceramic tiles of approved make, shade and size 30 cm x 30
cm for flooring, treads of steps and landing laid on a bed of 12 mm
thick, cement mortar 1:3 mix, flush pointing using white cement,
including cost of materials, labour,curing, complete as per
specifications.

FLOORING & DADO SQM 75 1000.00 75000.00

19 Supplying and fixing of door frame made of hollow excluded PVC
sections ( Nandi or equalant having dimension of 40 x 57mm with the
wall thickness of 2mm + / - 0.2mm duly reinforced with season good
plant at the hinges side. The door frame top to corner shall be metric
cut / weilded. m 20 500.00 10000.00
20 Supplying and fixing of doors shutters made of rigid PVC extruded
hollow sections ( Nandi or equivilant ) of 20mm x 200mm with the wall
thickness of 1.0mm +/ - 0.1 mm equaly devided in to 4 nos. with
tounge and groove locking arrangements. the shutter frame is made of
30mm x 76mm with the wal thickness of 1.5mm + / - 0.15mm section
metric cut and joined at 4 corners with 125mm x 225mm plastic
brackets. the shutters shall be horizantly reinforced with 2 nos. of 8mm
PVC rods. Teak wood battons shall be reinforced inside the door
shutters during the fabrications of the door shutters at those point
whereever the hard ware is fixed on to the door shutters.

Sqm 6 2000.00 12000.00

21 Providing & fixing approved qulity vitreous china clay Indian Water
closet with automatic flushing cistern including all necessary fixtures
as per instruction of engineer incharge
No 3 4000.00 12000.00
22 Providing & fixing approved qulity 1000 liter sintex including all
necessary fixtures as per instruction of engineer incharge
No 1 5000.00 5000.00
23 Providing & fixing approved qulity vitreous china clay Wash Basins
including all necessary fixtures as per instruction of engineer incharge
No 4 2600.00 10400.00
24 Providing & fixing approved qulity vitreous china clay URINAL BASIN
with automatic flushing cistern including all necessary fixtures as per
instruction of engineer incharge
No 3 2500.00 7500.00
25 Providing & fixing approved qulity cudappa for partisian wall urinals &
for supporting of wash basins including cutting grinding & finishing to
required standerd with all necessary fixtures as per instruction of
engineer incharge
Sqm 6 2000.00 12000.00
26 Miscellanious works includng piping, tap fixing, chambers, PVC pipes
connections, lighting works etc complete LS 74165.00
Total :- 500,000

3
 ESTIMATE FOR POST MATRIC GIRLS HOSTEL AT SINDHANUR.
TAL:SINDHANUR DISTRICT : RAICHUR
ABSTRACT

SEPTIC TANK & SOAT PIT

S.NO Description of item Unit QTY RATE AMOUNT
1 KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water
supply, sanitary lines and electrical conduits either in pits or in trenches
1.5m and above in width, in hard soil not exceeding 1.5 min depth
including dressing the bottom amd sides of pits and trenches, stacking the
excavated soil clear from edges of excavation with lead upto 50 m. 2.4
For foundation cum 25.905 208.95 5412.85

2 KSRB 4-1.3: Providing and laying in position cement concrete of mix M7.5
with OPC cement @ 180kgs, with 40mm and down size graded granite
metal coarse aggregates @ 0.85cum and fine aggregtes @ 0.57cum
machine mixed, machine mixed, concrete laid in layers not exceeding cms.
thick, well compacted, in foundation and plinth, including cost of all
materials, labour, HOM of machinery, curing complete as per
specifications. 4.3
For foundation bed cum 2.355 3592.05 8459.28

3 KSRB 4-1.6: Providing and laying in position plain cement concrete of mix
M 15 with cement @ 240kgs, with 20mm and down size graded granite
metal coarse aggregates @ 0.878cum and fine aggregtes @ 0.459cum,
machine mixed, concrete laid in layers not exceeding 15cms. thick, well
compacted, in foundation, plinth and cills, including cost of all materials,
labour,HOM of machinery, curing complete as per specifications. 4.6
For foundation bed cum 1.0488 4167.45 4370.82

4 KSRB 6-2.3 : Providing and constructing burnt brick masonry with

approved quality of non-modular bricks of standard size of class
designation 50 (table moulded) with cement mortar 1:6 for asement and
superstructure including cost of materials, labour charges, scaffolding,
curing, complete as per specifications.Specification No.KBS 6.2 6.6
Total cum 8.37 4621.05 38680.04

5 KSRB 4-1.7: Providing and laying on position plain cement concrete of mix
M10 with OPC cement @ 220kgs. With 20mm and down size graded
granite metal coarse aggregates @ 0.84cum and fine aggregtes @
0.56cum, machine mixed, concrete laid in layers not exceeding 15 cms.
thick, well compacted, in foundation, plinth and cills, including cost of all
materials, labour, HOM of machinery, curing complete as per
specifications. 4.7
cum 0.47 4047.75 1913.78

4
S.NO Description of item Unit QTY RATE AMOUNT
6 KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of
design mix M20 with OPC cement @ 320kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.878cum and fine aggregtes
@ 0.459cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation plinth and ground floor level
for roof slabs, staircase, lintles, retaining walls, return walls, walls (any
thickness) including attached plasters, columns, piers, abutments, pillars
posts, struts, buttresses, string or lacing courses, parapets, coping, bed
blocks, anchor blocks, plain window cills, fillets etc., including cost of all
materials, labour, HOM of machinery, curing, complete as per
specifications. 4.11
Top slab cum 1.61 4857.30 7811.32

7 KSRB15-3.5 : Providing 15mm thick cement plaster in single coat with

cement mortar 1:4, to brick masonry including rounding off corners
wherever required smooth rendering, : Providing and removing scaffolding,
including cost of materials, labour, curing complete as per specifications 15.13
Plastering in cm 1:4
Total sqm 36.48 129.15 4711.39

8 providing floating coat cement plastering and

finishing smooth including cost of materials
labour curing etc.,complete with all leads & 15.32
lifts
qty as per plastering item sqm 36.48 15.01 547.56

9 KSRB 4.9.2 : Providing TMT steel reinforcement for R.C.C work including
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps and
wastage shall not be measured paid) cost of materials, labour, HOM f
machinery complete as per specifications.Specification No. KBS

4.46
For slab 1.61*80 kg 128.8
q 1.288 6267.45 8072.48

10 KSRB 4-6.2 : Providing and removing centering, shuttering, strutting,

propping etc., and removal of form work for flat surface such as
suspended floors, roofs, landings, balconies and likes, thickness upto 200
mm including cost of all materials, labour complete as per specifications.
Specification No. KBS 4.6.2 4.29
Roof slab sqm 8.24 286.65 2362.00

11 Providing and fixing M.S.grill work for windows and ventilators weighing
21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S.flats
and square rods as per approved design, drawing including cutting steel
sections and welding the same to required pattern with a coat of red lead
primer, cost of materials, fixtures, labour and HOM of machinery complete
as per specifications. Specification No. KBS 7.12 7.9
sqm 0.36
kg 7.56 78.44 593.01

5
S.NO Description of item Unit QTY RATE AMOUNT
12 Providing & fixing sand cast iron soil waste
& vent pipes 100 mm dia with spun yarn
soaked in cement slury & cement morter 1:2
including cost of materials,labour testing DR
complete as per specifications
m 37.5 770.7 28901.25

13 KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water

supply, sanitary lines and electrical conduits either in pits or in trenches
1.5m and above in width, in hard soil not exceeding 1.5 min depth
including dressing the bottom amd sides of pits and trenches, stacking the
excavated soil clear from edges of excavation with lead upto 50 m. 2.4
For soak pit cum 10.00 208.95 2089.50
(2 NO'S X5.00)
14 KSRB 2-2.6 : Excavation 1.5m and above in width in soft rock by blasting
for foundation of buildings, water supply, sanitary lines and electrical
conduits wither in pits or in trenches not exceeding 1.5m in depth, stacking
the excavated stuff from edges of excavation with lead upto 50m including
cost of explosives, labour and HOM of equipment complete as per
specifications. specification. No KBS 2.1.C/2.9.4/2.18/2.19. FOR SOFT
ROCK WITHOUT BLASTING 2.6
For soak pit cum 8.00 651 5208.00
(2 NO'S X 4.0)
15 KSRB 6-2.3 : Providing and constructing burnt brick masonry with
approved quality of non-modular bricks of standard size of class
designation 50 (table moulded) with cement mortar 1:6 for asement and
superstructure including cost of materials, labour charges, scaffolding,
curing, complete as per specifications.Specification No.KBS 6.2 6.6
Total cum 1.24 4621.05 5730.10
(2 NO'S X 0.62)
16 KSRB 6-2.3 : Providing and constructing burnt brick masonry with
approved quality of non-modular bricks of standard size of class
designation 50 (table moulded) without cement mortar (DRY BRICK
WORK) for foundation including cost of materials, labour charges,
scaffolding etc complete as per specifications. 6.23
For soak pit (2 NO'S X 2.22) cum 4.44 3601.03 15988.57
Rate analysis : With cm 1:6 = 4401
Deduct cost of morter 2760*.26= 717.60
Deduct cost curing =253.84
Net rate = 3429.56/cum

17 Providing & filling with brick aggregates of

25mm(Nominal) with all leads & lifts etc, DR
complete (2 NO'S X 1.90) cum 3.80 315 1197.00

18 Providing & filling with course sand with all DR

leads & lifts (2 NO'S X 2.25) cum 4.50 997.5 4488.75

6
S.NO Description of item Unit QTY RATE AMOUNT
19 KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of
design mix M20 with OPC cement @ 320kgs, with 20mm and down size
graded granite metal coarse aggregates @ 0.878cum and fine aggregtes
@ 0.459cum, with superplastisiser @ 3lts confirming to IS9103-1999
Reaffirmed -2008, machine mixed, concrete laid in layers not exceeding 15
cms thick, vibrated for all works in foundation plinth and ground floor level
for roof slabs, staircase, lintles, retaining walls, return walls, walls (any
thickness) including attached plasters, columns, piers, abutments, pillars
posts, struts, buttresses, string or lacing courses, parapets, coping, bed
blocks, anchor blocks, plain window cills, fillets etc., including cost of all
materials, labour, HOM of machinery, curing, complete as per
specifications. 4.11
For top cover slab (2 NO'S X 0.18) cum 0.36 4857.30 1748.63

20 KSRB 4.9.2 : Providing TMT steel reinforcement for R.C.C work including
straightening, cutting, bending, hooking, placing in position, lapping and / or
welding wherever required, tying with binding wire and anchoring to the
adjoining members wherever necessary complete as per design (laps and
wastage shall not be measured paid) cost of materials, labour, HOM f
machinery complete as per specifications.Specification No. KBS
4.46
For slab of top cover kg 28.8
(2 NO'S X 14.4) q 0.288 6267.45 1805.03

TOTAL 150091.34

7
 EST No- 9
#REF!
ESTIMATE
CONSTRUCTION OF PANEL ROOM, GENERATOR ROOM & TRANSFORMER FOUND (15MX5M)
Sl.
Description Unit Qty. Rate Amount
No.
I EXCAVATION EARTH WORK
1 Earthwork Excavation for foundation and removing the
excavated earth to a distance not exceeding 50 M with a lift
upto 1.50 M in all kinds of soil strata.
Cum 32.70 150.00 4 904.4

2 Earth work filling to the foundation & basement with available

approved earth, including watering & compaction in layers of 15
cm thick with a lead of 50 M etc., complete.
Cum 28.20 80.00 2 255.6

II CONCRETE WORK
3 Providing & laying concrete of proportion CC 1:4:8 using 40
mm & downsize granite/trap/basalt clean approved hard
graded metal for FOUNDATION & FLOOR BED laid in layers
not exceeding 15 cm in thickness well compacted including
curing with all lead & lifts complete at all heights.

Cum 12.06 3200.00 38 599.3

4 Providing and laying in position plain cement concrete of mix

1:3:6 using 20 mm and down size graded granite/Trap/Basalt
metal, machine mixed, concrete laid in layers not exceeding 15
cms. Thick, well compacted, in foundation and plinth,
including cost of all materials,labour, HOM of machinery, curing
complete as per specifications.

Cum 0.05 4000.00 216.2

5 Providing & laying RCC of grade M-20 using

granite/trap/basalt clean approved hard graded metal of 20
mm and downsize with steel plywood or plank centering,
shuttering & form work including machine mixing, vibrating
curing & scaffolding with all leads & lifts etc., complete
(excluding cost of steel & fabrication charges) for RCC
COLUMNS & BEAMS

Cum 2.83 5500.00 15 563.3

6 Providing and laying in position reinforced cement concrete of

mix 1:1.5:3 using 20 mm and down size graded
granite/Trap/Basalt metal, machine mixed, concrete laid in
layers not exceeding 15 cms. thick, vibrated for R.C.C. beam &
slab, of all sizes in foundation plinth and superstructure ground
floor level for columns, including cost of all materials,labour,
HOM of machinery, curing complete as per specifications.

Cum 3.18 5800.00 18 434.3

7 Providing and laying in position reinforced cement concrete of

mix 1:1.5:3 using 20 mm and down size graded
granite/Trap/Basalt metal, machine mixed, concrete laid in
layers not exceeding 15 cms. thick, vibrated for R.C.C. beam &
slab, of all sizes in foundation plinth and superstructure ground
floor level for columns, including cost of all materials,labour,
HOM of machinery, curing complete as per specifications.

8
Sl.
Description Unit Qty. Rate Amount
No.
Cum 23.50 5800.00 1 36 308.1

8 Providing & laying RCC of grade M-20 using

granite/trap/basalt clean approved hard graded metal of 20
mm and downsize with steel plywood or plank centering,
shuttering & form work including machine mixing, vibrating
curing & scaffolding with all leads & lifts etc., complete
(excluding cost of steel & fabrication charges) for COLUMN
FOOTINGS.

Footings CUM 4.58 5500.00 25 205.3

9 Providing & laying RCC of grade M-20 using

granite/trap/basalt clean approved hard graded metal of 20
mm and downsize with steel plywood or plank centering,
shuttering & form work including machine mixing, vibrating
curing & scaffolding with all leads & lifts etc., complete
(excluding cost of steel & fabrication charges) for CHAJJAS
at all heights

Sqm 1.88 400.00 752.0

III MASONRY WORK

10 Providing constructing uncoursed rubble stone masonry with
approved sandstone's in CM 1:6 in courses not less than 15 cm
high with bond stones at 2 Mtrs. apart in each layer including
curing with all leads & lifts etc., complete in FOUNDATION &
PLINTH & SUPERSTRUCTURE.
Cum 8.46 3000.00 25 381.5

11 Providing & fixing precast BRICK MASONRY for

superstructure with crushing strength not less than 35 Kg / cm 2
walls in cement mortar 1:6 including raking of joints, necessary
scaffolding curing etc., complete.

9.41 3500.00 32 949.9

IV STEEL
12 Providing & fabricating HYSD STEEL reinforcement
confirming to IS 1786 of 1966 including shifting, cutting &
binding, lapping wherever required, placing in position, tying
with binding wire of approved quality & guage as per design
and drawing including cost of steel and binding wire etc.,
complete at all heights. (laps & overlaps shall not be measured
& paid separately).

kg 3474.07 60.00 2 08 443.9

V DOORS, WINDOWS
13 Providing fabricating assembling and fixing in position anodized
aluminium Door Frame & shutters using 47.62 x 44.45 mm
section thickness 3.18mm ,weight 1.505Kg./m for vertical
frame; 47.62 x 44.45 thickness of 3mm, weight 1.42 kg./m for
top section 49.91mm x 44.45mm with wall thickness of 3mm
weight 1.495Kg. / mm for central rail, and 114.3 mm x
44.45mm thickness 3.18mm , weight 2.646 Kg/ mm for bottom
rail; alluminium sections anodized 12 to 15 microns and cut to
lenght joint meterd and corners granded, bottom rails and top
rails hinged or pivoted, opening arrangements including
providing and fixing standered aproved acceroies, such as
alluminium handles, tower bolts, lock, pivot; hinges

9
Sl.
Description Unit Qty. Rate Amount
No.
PVC or rubber gascate, 12mm free laminating sheets
( Novopan ) exterior grade of approved colour both sides same
colour for bottom panal of maximum height 0.9mm and 5.5mm
thick plain glass for top panel ( Novopan ) and glass fixed with
glazed clips 19mm x 17.3mm x 11mm, 0.9mm thick, weight of
0.124Kg./mm; alluminium sections treated for removal of any
rust and prevention of further rust formation, and coated with
greasy materials for non adherence of mortars or any other
sticky materials, including cost of materilas, fixtures,labour and
HOM of machineries complete as per specifications.

0.82 2600.00 2 138.6

14 Providing fabricating assembling and fixing in position anodized

aluminium Window Frame & shutters using 47.62 x 44.45
mm section thickness 3.18mm ,weight 1.505Kg./m for vertical
frame; 47.62 x 44.45 thickness of 3mm, weight 1.42 kg./m for
top section 49.91mm x 44.45mm with wall thickness of 3mm
weight 1.495Kg. / mm for central rail, and 114.3 mm x
44.45mm thickness 3.18mm , weight 2.646 Kg/ mm for bottom
rail; alluminium sections anodized 12 to 15 microns and cut to
lenght joint meterd and corners granded, bottom rails and top
rails hinged or pivoted, opening arrangements including
providing and fixing standered aproved acceroies, such as
alluminium handles, tower bolts, lock, pivot; hinges

PVC or rubber gascate, 12mm free laminating sheets

( Novopan ) exterior grade of approved colour both sides same
colour for bottom panal of maximum height 0.9mm and 5.5mm
thick plain glass for top panel ( Novopan ) and glass fixed with
glazed clips 19mm x 17.3mm x 11mm, 0.9mm thick, weight of
0.124Kg./mm; alluminium sections treated for removal of any
rust and prevention of further rust formation, and coated with
greasy materials for non adherence of mortars or any other
sticky materials, including cost of materilas, fixtures,labour and
HOM of machineries complete as per specifications.

4.70 2500.00 11 750.7

15 Providing and fixing Gear type ROLLING SHUTTERS made

out of 18 gauge 75mm wide MS lathes of convex corrugation
with side guides of 10-12 gauge 75mm wide and bottom rail
200mm height and 25mm width with interlocking arrangement
for steel lathes by means of alternate and clips suspension
shaft with high tension coil type springs 2 nos. locking
arrangements, pulling hooks, 4 nos. handies and with MS top
cover of 12 guage including all fittings and accessories and
painted with red oxide paint and 2 coats of synthetic enamel
one paint etc., complete
SQM 5.01 4000.00 20 054.5

VI PLASTERING & PAINTING

16 Providing external cement plaster in CM 1:4 20mm thick in
two coats with waterproof compound and using approved
sand including rounding off corners wherever required, with
sponge finish, curing, providing and removing scaffolding,
including cost of material and labour with all leads and lifts
etc., complete at all heights as directed.

44.03 150.00 6 603.9

10
Sl.
Description Unit Qty. Rate Amount
No.
17 Providing internal cement plaster in CM 1:4 20mm thick in
single coat using approved sand including rounding off
corners wherever required, smooth rendering with neeru
finish, curing, providing and removing scaffolding, including
cost of material and labour with all leads and lifts etc.,
complete at all heights as directed.

77.59 120.00 9 310.8

18 Providing, applying and finishing with 3 coats of OIL BOUND

washable distemper paint of approved brand and shade
including priming coat with distemper primer after throughly
brooming/ cleaning the surface free of mortar drops and other
foreign matter, including preparing the surface even and sand
paper smooth,incuding cost of materials, labour etc., complete
for INTERNAL WALLS as directed.

SQM 77.59 75.00 5 819.2

19 Providing applying and finishing with 2 coats of

WATERPROOF CEMENT PAINT approved brand and shade
to give an even shade after throughly brooming/ cleaning the
surface free of mortar drops and other foreign matter,
including preparing the surface even and sand paper
smooth,incuding cost of materials, labour etc., complete as
directed

SQM 44.03 75.00 3 301.9

VI FLOORING
20 Providing and laying flooring with 40 mm thick with an
under layer of 30mm thick CC (1:2:4) using broken granite
metal of 12.5mm nominal size and top layer of 10 mm thick
plaster with 1:3 cement mortar mixed with with red oxide
( using 3.5 kg red oxide per 50 kg of cement ) finish with
floating coat of neat cement mixed red oxide (mix of same
proportion)including cost of materials labour, curing, etc
complete as per specifications.

Sqm 75.24 450.00 33 856.1

VII ROOFING WORKS

21 Providing and fixing GALVALUME SHEETS of 0.47 mm thick
as per drawing of approved quality and make for roofing &
side cladding, with fixtures, fastenings and accessories
including scaffolding with all leads and lifts etc., complete at all
heights.
Side Cladding
109.87 450.00 49 441.1
22 Providing straightening, cutting fabricating and erecting M.S.
STRUCTURAL STEEL in roof trusses, column, portal frames,
beams, bracing’s, platform, claddings, ladders, staircase,
cleats, purlins, protection angle, brackets, hangers, base plates,
stiffeners plates, wind bracing’s, tie rods insert plates, cable
racks including wastage’s welding, bolting wherever necessary,
and painting with one coat of red-oxide paint & two coats of
approved synthetic enamel paint with all leads & lifts etc.,
complete at all heights.

@15 Kg/m2 1645.10 60 98 705.9

GRAND.TOTAL :- 7 49 997.0
Say Rs 750,000.00

11
 EST No- 10
#REF!
CONSTRUCTION OF CONCRTE ROAD
ESTIMATE
Length of road 18 width = 125 m
Sl.
Description of work Qty. Unit Rate Amount
No.
1 KSRB 2 - 2.2 : Earthwork excavation for foundation of
buildings, water supply, sanitary lines and electrical
conduits either in pits or in trenches 1.5m and above in
width, in hard soil not exceeding 1.5 m. in depth
including dressing the bottom and sides of pits and
trenches, stacking the excavated soil clear from edges of
excavation with lead upto 50 m. after breaking of clods
complete as per specifications. (Specification No. KBS
2.1(b) / 2.3.5) with all leads and lifts and as directed by
the Engineer-in-charge.

2081.25 Cum 130.00 2 70 562.50

2 Providing dry trap rubble stone soling 23 cm thk.
(compacted thickness), hand packing, ramming,
compacting etc. complete. Voids & inters to be filled
with approved filler material like murum etc. The voids not
to exceed 30% . The rate shall be for compacated
thickness)
693.75 Cum 1200.00 8 32 500.00

3 KSRB 2 .3 : Filling BORROW excavated earth

(excluding rock)in sides of fondations up to plinth in
layers not exceeding 20cm in depth,compacting each
deposited layer by raming after watering upto 95%PD
with lead up to 50M and the lift up to 1.5M including cost
of all materials,labour complete as per specifications.
(Specification No. KBS 2.9)

For Road 18m width 1387.50 Cum

1387.50 Cum 450.00 6 24 375.00

4 KSRB 4 - 1.3 : Providing and laying in position plain

cement concrete of mix 1:4:8 (M - 7.5) using 40 mm and
down size graded granite/Trap/Basalt metal, machine
mixed, concrete laid in layers not exceeding 15 cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials,labour, HOM of machinery,
curing complete as per specifications.(Specification No.
KBS 4.1, 4.2)

225.00 Cum 4085.71 9 19 284.75

5 Providing & laying concrete of proportion CC 1:1.5:3 of

150 mm thick in VDF flooring with 20mm and downsize
granite/trap/basalt clean approved graded, hard metal
with necessary shuttering laid in panels as directed and
finishing the top smooth with VDFafter vibrating/tamping
with all leads and lifts etc., complete for FLOORING.

382.50 Cum 7880.00 30 14 100.00

6 KSRB 4 - 9.2 : Providing TMT steel reinforcement for
R.C.C. work including straightening, cutting, bending,
hooking, placing in position, lapping and / or welding
wherever required, tying with binding wire and anchoring
to the adjoining members wherever necessary complete
as per design (laps and wastage shall not be measured
and paid) cost of materials, labour, HOM of machinery
complete as per specifications. (Specification No. KBS
4.6.3)

16478.10 Kg 60.00 9 88 686.00

12
Sl.
Description of work Qty. Unit Rate Amount
No.

7 Providing and laying 125 micron polythene firm Below

Concrete Surface including with all leads and lifts etc.,
complete at all heights.

2250.00 Sqm 55.71 1 25 347.50

8 Providing and removing centering, shuttering, strutting,

propping etc., and removal of form work for all Works
including cost of all materials, labour complete as per
specification.

25.00 Sqm 325.00 8 125.00

9 Providing and fixing at the site precast cement concrete

M 15 grade Kerb, 425cms wide and 10 cms thick using
20mm and down size grainte metal as per standrad
design including the cost of materails, steel, labour,
curing complete as per specifications
250.00 m 200.00 50 000.00

10 KSRRB M2600-4 :(iii) Providing an fixing 20 mm thick

premoulded joint filler in expansion joint for fixed ends of
simply supported spans not exceeding 10 m to cater for a
horizontal movement upto 20 mm, covered with sealant
complete as per drawing & Technical specification
complete as per specifications. MORTH Specification
No.2605

108.00 m 158.00 17 064.00

11 Providing and Laying CPVC pipes confirming to IS 15778
having thermel stability for hot & cold including fittings &
fixing end cap etc. complete (Dowel bar cap for road
work)
25mm dia nominal OD pipes 81.00 m 175.00 14 175.00

Total 68 64 219.75
Say Rs 6,864,000.00

13
 HIGHCO ENGINEERS (P) LTD .
SHED
BILL OF QUANTITY
Sl No. Description of work Unit Qty. Amount
I EARTHWORK EXCAVATION &FILLING
1 Earthwork excavation for foundation of buildings, water
supply, sanitary lines and electrical conduits either in
pits or in trenches 1.5m and above in width, in hard soil
not exceeding 1.5 m. in depth including dressing the
bottom and sides of pits and trenches, stacking the
excavated soil clear from edges of excavation with lead
upto 50 m. after breaking of clods complete as per
specifications.

Cum 21.63

2 Filling available excavated earth (excluding rock) in

sides of foundations upto plinth in layers not exceeding
20 cms. In depth, compacting each deposited layer by
ramming with mechanical vibrator &vibro roller after
watering with all lead & lift etc including cost of all
labour complete as per specifications.

Cum 75.96

3 Filling brought from outside excavated earth (excluding

rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited
layer by ramming with mechanical vibrator & vibro
roller after watering with all lead & lift etc including cost
of all labour complete as per specifications.

Cum #NAME?

4 Providing, conveying & laying boulder soiling under

floors with approved qualitygranite/trap boulders, 23cm
in thickness including filling the voids with chips & sand
with proper packing with all leads & lifts etc., complete.

Cum #NAME?

II CONCRETE WORK
5 Providing and laying in position plain cement concrete of
mix M 7.5 with OPC cement @ 180 Kgs, with 40mm and
down size graded granite metal coarse aggregates @
0.85 cum and fine aggregates @ 0. 57 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications.

Cum 5.41

14
Sl No. Description of work Unit Qty. Amount
6 Providing and laying in position plain cement concrete of
mix M 10with OPC cement @ 240 Kgs, with 20mm and
down size graded granite metal coarse aggregates @
0.878 cum and fine aggregates @ 0.459 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift

Cum #NAME?

7 Providing and laying in position reinforced cement

concrete of design mix M20 with OPC cement @ 320Kgs,
with 20mm and down size graded granite metal coarse
aggregates @ 0.878 cum and fine aggregates @ 0.459
cum, with superplastisiser @3 lts comfirming to IS 9103-
1999 Reaffirmed - 2008,, machine mixed, concrete laid
in layers not exceeding 15cms thick, vibrated for all
works in foundation plinth and ground floor level for
roof slabs, staircase, pedestal ,lintles, retaining walls,
return walls, walls (any thickness) including attached
plaster, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bd
blocks, anchor blocks, plain window cills, fillets etc.,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift

Cum 8.36

8 Providing and laying in position reinforced cement

concrete of design mix M20 with OPC cement @ 24 Kgs,
with 12mm and down size graded granite metal coarse
aggregates @ 0.5175 cum and fine aggregates @ 0.345
cum, with superplastisiser @0.225 lts, machine mixed,
well compacted for plain chajja of 7.5 cms. Average
thickness, upto ground floor level, including cost of all
materials, labour, HOM of machinery, finishing, curing,
complete as per specifications.

Sqm #NAME?

9 Providing & laying concrete of proportion RCC M20 of

125 mm thick in VDF flooring with 20mm and downsize
granite/trap/basalt clean approved graded, hard metal
with necessary centering & shuttering laid in panels as
directed and finishing the top smooth with VDF after
vibrating/tamping including groove cutting & groove
filling with poly sulphide / bitumen complete for
FLOORING.

Cum #NAME?

15
Sl No. Description of work Unit Qty. Amount
10 Providing and laying in position plain cement concrete of
mix M 10 with OPC cement @ 220 Kgs, with 40mm and
down size graded granite metal coarse aggregates @
0.892 cum and fine aggregates @ 0.465 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift.

Cum #NAME?
III CENTERING & SHUTTERING
11 Providing and removing centering, shuttering, strutting,
propping etc., and removal of form work for foundations,
footings, bases of columns for mass concrete including
cost of all materials, labour complete as per
specifications.

Sqm 83.00

12 Providing and removing centering, shuttering, strutting,

propping etc., for columns, pillars, piers, abutments, post
and struts, square /rectangular /poygon in plan
including cost of all matrials, labour complete as per
specification.

Sqm #NAME?

13 Providing and removing centring, shuttering, strutting,

propping etc., and removal of form work for sides and
soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth
including cost of all materials, labour complete as per
specifications.

Sqm #NAME?

14 Providing and removing centering, shuttering, strtting,

propping etc., for chajjas, corbels etc., including edges
including cost of all materials, labour complete as per
specification.

Sqm #NAME?

IV Masonry Works
15 Providing and constructing granite/trap/basalt rubble
stone masonry in foundation with cement mortar 1:6
(uncoursed), bond stones at two m.apart in each course
including cost of materials, labour, curing complete as
per specifications.

Cum #NAME?

16 Providing and constructing burnt brick masonry for

basement and super structure with approved quality of
non-modular bricks of standard size of class designation
35 with cement mortar 1:6 including cost of materials,
labour charges, scaffolding, curing complete as per
specifications.

SQM #NAME?
16
Sl No. Description of work Unit Qty. Amount

V Steel Works
17 Providing T.M.T steel reinforcement for RCC work
including straightening, cutting bending, hooking,
placing in position, lapping and/or welding wherever
requried, tying with GI binding wire of 17 guage and
anchoring to the adjoining members wherever necessary
complete as per design (laps, hooks and wastage shall
not be measured and paid) cost of materials, labour,
HOM of machinery complete as per specifications.

Ton 1.75

18 Providing straightening, cutting fabricating and erecting

M.S. STRUCTURAL STEEL in roof trusses, column, portal
frames, beams, bracing’s, platform, claddings, ladders,
staircase, cleats, purlins, protection angle, brackets,
hangers, base plates, stiffeners plates, wind bracing’s, tie
rods insert plates, cable racks including wastage’s
welding, bolting wherever necessary, and painting with
one coat of red-oxide paint & two coats of approved
synthetic enamel paint with all leads & lifts etc.,
complete at all heights.

Ton #NAME?

19 Providing and fixing M.S.grill work for windows and

ventilators weighing 21kg/sqm using M.S. flats, or M.S.
square rods, or combination of M.S. flats and square rods
as per approved design, drawing including cutting steel
sections and welding the same to required pattern with a
coat of red lead primer, cost of materials, fixtures, labour
and HOM of machinery complete as per specifications.

Total qty in kgs(qty in sqm * 21 kg/sqm) Kg #NAME?

VI Door and Windows

17
Sl No. Description of work Unit Qty. Amount
20 Providing and fixing in position aluminium windows
and ventilators as per approved drawings with sliding
shutters using double track window frame section of size
61.85x31.75mm. with 1.2mm thick, bottom section
weight 0.695 kg/m, sides and top sections 1.3 mm. thick
weight 0.659 kg/m; and shutter comprising top and
bottom section of size 40mmx18mm, 1.25mm thick
0.417 kg./m; shutter outer side 40mmx18mm,
1.25mm.thick weight 0.417 kg/m, shutter interlock
section 40mmx26.7mm, 1.1mm thick, weight 0.469
kg/m. the shutters mounted on nylon rollers with
approved quality of fixtures such as aluminium handles
tower bolts etc.; and providing and fixing 5.5mm. thick
plain glass for shutters fitted with rubber beading
aluminium sections including cutting to required length,
joints mitred subdividing the frame tenonned and
rivetted in the assembled frame stiffened with end clips
at corners angles etc., and fixed to the walls, lintels, floor
beams/cills as the case may be with necessary steel
screws, raul plugs, or teak wood gatties including cutting
masonry or concrete and making good the original
surface using cement mortar, aluminium sections
pretreated for removal of any Specification No. KBS
using aluminium section powdered coated to a minimum
of 60-70 microns with exterior durable pure polyester
grade powder of approved quality.

sqm #NAME?

21 Providing and fixing Gear type ROLLING SHUTTERS

made out of 18 gauge 75mm wide MS lathes of convex
corrugation with side guides of 10-12 gauge 75mm wide
and bottom rail 200mm height and 25mm width with
interlocking arrangement for steel lathes by means of
alternate and clips suspension shaft with high tension
coil type springs 2 nos. locking arrangements, pulling
hooks, 4 nos. handles and with MS top cover of 12 gauge
including all fittings and accessories and painted with
red oxide paint and 2 coats of synthetic enamel one paint
etc., complete

Sqm #NAME?

VII PLASTERING & PAINTING

22 Providing internal cement plaster in CM 1:4 18mm thick
in single coat using approved sand including rounding
off corners wherever required, smooth rendering with
neeru finish, curing, providing and removing scaffolding,
including cost of material and labour with all leads and
lifts etc., complete at all heights as directed.

Sqm #NAME?

18
Sl No. Description of work Unit Qty. Amount
23 Providing 20mm thick cement plaster in single coat with
cement mortar 1:4, to stone masonry including rounding
off corners wherever required smooth rendering, :
Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.

Sqm #NAME?

24 Providing and applying two coats with oil bound

washable distemper of approved brand, and shade on
wall surface including priming coat with distemper
primer after throughly brooming the surface free from,
mortar drops and other foreign matter including
preparing the surface even and sand paper smooth, cost
of materials, labour, complete as per specifications.

Internal wall Sqm #NAME?

25 Providing and finishing external walls in two coats with

waterproof cement paint of approved brand and shade
including priming coat to give an even shade after
throughly brooming the surface to remove all dirt and
loose powdered material, free from mortar drops and
other foreign matter cost of materials, labour, complete
as per specifications.

External wall Sqm #NAME?

26 Providing and applying enamel metal paint two coats

(including priming coat) over new steel or other metal
surface brushing to give an even shade after cleaning oil,
grease, dirt and other foreign matter, including cost of
materials, labour, complete as per specifications.

Sqm #NAME?

VIII Roof and Floor works

27 Providing and fixing GALVALUME SHEETS of 0.47 mm
thick as per drawing of approved quality and make for
roofing & side cladding, with fixtures, flasterings and
accessories including scaffolding with all leads and lifts
etc., complete at all heights.

Sqm #NAME?
28 Providing and fixing 2 mm thick corrugated
polycarbonate sheets fixed with G.I.mesh J or L hooks,
bolt, nuts and washers, laps & overlaps including
scaffolding with all leads and lifts etc. complete with all
leads and lifts and as directed by the Engineer-in-charge.

10% for Polycarbonate Sheets Sqm #NAME?

19
Sl No. Description of work Unit Qty. Amount
29 Providing and fixing fixed with G.I. mesh For below
corrugated polycarbonate sheet including scaffolding
with all leads and lifts etc. complete with all leads and
lifts and as directed by the Engineer-in-charge.

Sqm 596

30 Providing and fixing GALVALUME RIDGE SHEETS of

approved thick as per drawing of approved quality and
make for roofing , with fixtures, fastenings and
accessories including scaffolding with all leads and lifts
etc., complete at all heights.

Rmt #NAME?

31 Providing and casting in situ the foundation bolt

grouting with "Conbextra" GP-2 nonshrink grout as
per manufactures specifications excluding the cost of
bolts and Including all materials,tools, pouring at
specified. consistancy, cleaning etc.

Cum 0.21

32 Providing and fixing with proper aligning in position

FOUNDATION BOLTS (including grouting) of sizes
ranging from 12mm to 50mm in diameter with washers,
nuts, including cost of threading etc., complete at all
heights.

No 64.00
33 Providing and fixing M S 3.2 TH Rain water gutter
with all accessories such as MS clamps, coach screws,
brackets and supports, welding bolting and specials
necessary for fixing including scaffolding with all leads
and lifts etc., complete at all heights, FRP COATING IN
SIDE including two coats of anticorrosive paint over a Rmt #NAME?
34 coat or red-oxide
Providing primer
and fixing onforwall
MS clamps
surface &4MSkgsupporting
/ Sq.cm
members.
H.D.P.E. rain down water pipes 110 mm outer dia
approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall
plugs, screws, including cost of materials, labour, curing Rmt #NAME?
complete as per specifications.
TOTAL AMOUNT

20
 HIGHCO ENGINEERS (P) LTD .
SHED
ABSTRACT
Sl No. Description of work Unit Qty. Rate Amount
I EARTHWORK EXCAVATION &FILLING
1 Earthwork excavation for foundation of buildings, water
supply, sanitary lines and electrical conduits either in
pits or in trenches 1.5m and above in width, in hard soil
not exceeding 1.5 m. in depth including dressing the
bottom and sides of pits and trenches, stacking the
excavated soil clear from edges of excavation with lead
upto 50 m. after breaking of clods complete as per
specifications.

Cum 21.63 282.00 6101.00

2 Filling available excavated earth (excluding rock) in

sides of foundations upto plinth in layers not exceeding
20 cms. In depth, compacting each deposited layer by
ramming with mechanical vibrator &vibro roller after
watering with all lead & lift etc including cost of all
labour complete as per specifications.

Cum 75.96 127.00 9647.00

3 Filling brought from outside excavated earth (excluding

rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited
layer by ramming with mechanical vibrator & vibro
roller after watering with all lead & lift etc including cost
of all labour complete as per specifications.

Cum #NAME? 445.00 #NAME?

4 Providing, conveying & laying boulder soiling under

floors with approved qualitygranite/trap boulders, 23cm
in thickness including filling the voids with chips & sand
with proper packing with all leads & lifts etc., complete.

Cum #NAME? 1972.00 #NAME?

II CONCRETE WORK
5 Providing and laying in position plain cement concrete of
mix M 7.5 with OPC cement @ 180 Kgs, with 40mm and
down size graded granite metal coarse aggregates @
0.85 cum and fine aggregates @ 0. 57 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications.

Cum 5.41 5180.00 28014.00

6 Providing and laying in position plain cement concrete of

mix M 10with OPC cement @ 240 Kgs, with 20mm and
down size graded granite metal coarse aggregates @
0.878 cum and fine aggregates @ 0.459 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift

Cum #NAME? 5609.00 #NAME?

21
Sl No. Description of work Unit Qty. Rate Amount
7 Providing and laying in position reinforced cement
concrete of design mix M20 with OPC cement @ 320Kgs,
with 20mm and down size graded granite metal coarse
aggregates @ 0.878 cum and fine aggregates @ 0.459
cum, with superplastisiser @3 lts comfirming to IS 9103-
1999 Reaffirmed - 2008,, machine mixed, concrete laid
in layers not exceeding 15cms thick, vibrated for all
works in foundation plinth and ground floor level for
roof slabs, staircase, pedestal ,lintles, retaining walls,
return walls, walls (any thickness) including attached
plaster, columns, piers, abutments, pillars, posts, struts,
buttresses, string or lacing courses, parapets, coping, bd
blocks, anchor blocks, plain window cills, fillets etc.,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift

Cum 8.36 6229.00 52075.00

8 Providing and laying in position reinforced cement

concrete of design mix M20 with OPC cement @ 24 Kgs,
with 12mm and down size graded granite metal coarse
aggregates @ 0.5175 cum and fine aggregates @ 0.345
cum, with superplastisiser @0.225 lts, machine mixed,
well compacted for plain chajja of 7.5 cms. Average
thickness, upto ground floor level, including cost of all
materials, labour, HOM of machinery, finishing, curing,
complete as per specifications.

Sqm #NAME? 475.00 #NAME?

9 Providing & laying concrete of proportion RCC M20 of

125 mm thick in VDF flooring with 20mm and downsize
granite/trap/basalt clean approved graded, hard metal
with necessary centering & shuttering laid in panels as
directed and finishing the top smooth with VDF after
vibrating/tamping including groove cutting & groove
filling with poly sulphide / bitumen complete for
FLOORING.

Cum #NAME? 7500.00 #NAME?

10 Providing and laying in position plain cement concrete of

mix M 10 with OPC cement @ 220 Kgs, with 40mm and
down size graded granite metal coarse aggregates @
0.892 cum and fine aggregates @ 0.465 cum machine
mixed, concrete laid in layers not exceeding 15cms.
Thick, well compacted, in foundation and plinth,
including cost of all materials, labour, HOM of
machinery, curing, complete as per specifications. For all
lead & lift.

Cum #NAME? 5369.00 #NAME?

III CENTERING & SHUTTERING
11 Providing and removing centering, shuttering, strutting,
propping etc., and removal of form work for foundations,
footings, bases of columns for mass concrete including
cost of all materials, labour complete as per
specifications.

Sqm 83.00 226.00 18758.00

12 Providing and removing centering, shuttering, strutting,

propping etc., for columns, pillars, piers, abutments, post
and struts, square /rectangular /poygon in plan
including cost of all matrials, labour complete as per
specification.

Sqm #NAME? 366.00 #NAME?

22
Sl No. Description of work Unit Qty. Rate Amount
13 Providing and removing centring, shuttering, strutting,
propping etc., and removal of form work for sides and
soffits of beams, beam haunchings, cantilever girders,
bressumers and lintels not exceeding 1m in depth
including cost of all materials, labour complete as per
specifications.

Sqm #NAME? 256.00 #NAME?

14 Providing and removing centering, shuttering, strtting,

propping etc., for chajjas, corbels etc., including edges
including cost of all materials, labour complete as per
specification.

Sqm #NAME? 265.00 #NAME?

IV Masonry Works
15 Providing and constructing granite/trap/basalt rubble
stone masonry in foundation with cement mortar 1:6
(uncoursed), bond stones at two m.apart in each course
including cost of materials, labour, curing complete as
per specifications.

Cum #NAME? 3200.00 #NAME?

16 Providing and constructing burnt brick masonry for

basement and super structure with approved quality of
non-modular bricks of standard size of class designation
35 with cement mortar 1:6 including cost of materials,
labour charges, scaffolding, curing complete as per
specifications.

SQM #NAME? 5466.00 #NAME?

V Steel Works
17 Providing T.M.T steel reinforcement for RCC work
including straightening, cutting bending, hooking,
placing in position, lapping and/or welding wherever
requried, tying with GI binding wire of 17 guage and
anchoring to the adjoining members wherever necessary
complete as per design (laps, hooks and wastage shall
not be measured and paid) cost of materials, labour,
HOM of machinery complete as per specifications.

Ton 1.75 61082.00 106894.00

18 Providing straightening, cutting fabricating and erecting

M.S. STRUCTURAL STEEL in roof trusses, column, portal
frames, beams, bracing’s, platform, claddings, ladders,
staircase, cleats, purlins, protection angle, brackets,
hangers, base plates, stiffeners plates, wind bracing’s, tie
rods insert plates, cable racks including wastage’s
welding, bolting wherever necessary, and painting with
one coat of red-oxide paint & two coats of approved
synthetic enamel paint with all leads & lifts etc.,
complete at all heights.

Ton 17192.68 85.00 1461378.00

19 Providing and fixing M.S.grill work for windows and

ventilators weighing 21kg/sqm using M.S. flats, or M.S.
square rods, or combination of M.S. flats and square rods
as per approved design, drawing including cutting steel
sections and welding the same to required pattern with a
coat of red lead primer, cost of materials, fixtures, labour
and HOM of machinery complete as per specifications.

Total qty in kgs(qty in sqm * 21 kg/sqm) Kg #NAME? 87.00 #NAME?

VI Door and Windows

23
Sl No. Description of work Unit Qty. Rate Amount
20 Providing and fixing in position aluminium windows
and ventilators as per approved drawings with sliding
shutters using double track window frame section of size
61.85x31.75mm. with 1.2mm thick, bottom section
weight 0.695 kg/m, sides and top sections 1.3 mm. thick
weight 0.659 kg/m; and shutter comprising top and
bottom section of size 40mmx18mm, 1.25mm thick
0.417 kg./m; shutter outer side 40mmx18mm,
1.25mm.thick weight 0.417 kg/m, shutter interlock
section 40mmx26.7mm, 1.1mm thick, weight 0.469
kg/m. the shutters mounted on nylon rollers with
approved quality of fixtures such as aluminium handles
tower bolts etc.; and providing and fixing 5.5mm. thick sqm #NAME? 3811.00 #NAME?
plain glass for shutters fitted with rubber beading
21 aluminium
Providing and sections including
fixing cutting
Gear type to required
ROLLING length,
SHUTTERS
joints
made out mitred
of 18subdividing
gauge 75mmthe wideframe tenonned
MS lathes and
of convex
rivetted
corrugationin the
withassembled
side guidesframe stiffened
of 10-12 gaugewith
75mmend wide
clips
at
andcorners
bottomangles etc., andheight
rail 200mm fixed toand
the 25mm
walls, lintels,
width floor
with
beams/cills
interlocking as the case may
arrangement be with
for steel necessary
lathes by means steel
of
screws, raul plugs, or teak wood gatties including
alternate and clips suspension shaft with high tension cutting
masonry or concrete
coil type springs 2 nos.and making
locking good the original
arrangements, pulling
surface usinghandles
hooks, 4 nos. cement and mortar,
with MS topaluminium
cover of 12sections
gauge
pretreated for removal of any Specification
including all fittings and accessories and painted with No. KBS
using
red aluminium
oxide paint and section powdered
2 coats coated
of synthetic to a minimum
enamel one paint
of
etc.,60-70 microns with exterior durable pure polyester
complete
grade powder of approved quality.

Sqm #NAME? 2860.00 #NAME?

VII PLASTERING & PAINTING

22 Providing internal cement plaster in CM 1:4 18mm thick
in single coat using approved sand including rounding
off corners wherever required, smooth rendering with
neeru finish, curing, providing and removing scaffolding,
including cost of material and labour with all leads and
lifts etc., complete at all heights as directed.

Sqm #NAME? 216.00 #NAME?

24
Sl No. Description of work Unit Qty. Rate Amount
23 Providing 20mm thick cement plaster in single coat with
cement mortar 1:4, to stone masonry including rounding
off corners wherever required smooth rendering, :
Providing and removing scaffolding, including cost of
materials, labour, curing complete as per specifications.

Sqm #NAME? 229.00 #NAME?

24 Providing and applying two coats with oil bound

washable distemper of approved brand, and shade on
wall surface including priming coat with distemper
primer after throughly brooming the surface free from,
mortar drops and other foreign matter including
preparing the surface even and sand paper smooth, cost
of materials, labour, complete as per specifications.

Internal wall Sqm #NAME? 71.00 #NAME?

25 Providing and finishing external walls in two coats with

waterproof cement paint of approved brand and shade
including priming coat to give an even shade after
throughly brooming the surface to remove all dirt and
loose powdered material, free from mortar drops and
other foreign matter cost of materials, labour, complete
as per specifications.

External wall Sqm #NAME? 69.00 #NAME?

26 Providing and applying enamel metal paint two coats

(including priming coat) over new steel or other metal
surface brushing to give an even shade after cleaning oil,
grease, dirt and other foreign matter, including cost of
materials, labour, complete as per specifications.

Sqm #NAME? 82.00 #NAME?

VIII Roof and Floor works

27 Providing and fixing GALVALUME SHEETS of 0.47 mm
thick as per drawing of approved quality and make for
roofing & side cladding, with fixtures, flasterings and
accessories including scaffolding with all leads and lifts
etc., complete at all heights.

Sqm #NAME? 589.50 #NAME?

28 Providing and fixing 2 mm thick corrugated
polycarbonate sheets fixed with G.I.mesh J or L hooks,
bolt, nuts and washers, laps & overlaps including
scaffolding with all leads and lifts etc. complete with all
10% for
leads andPolycarbonate
lifts and as directed by the Engineer-in-charge. Sqm
Sheets #NAME? 2000.00 #NAME?

29 Providing and fixing fixed with G.I. mesh For below

corrugated polycarbonate sheet including scaffolding
with all leads and lifts etc. complete with all leads and
lifts and as directed by the Engineer-in-charge.

Sqm 596 450.00 268380.00

30 Providing and fixing GALVALUME RIDGE SHEETS of

approved thick as per drawing of approved quality and
make for roofing , with fixtures, fastenings and
accessories including scaffolding with all leads and lifts
etc., complete at all heights.

Rmt #NAME? 589.00 #NAME?

31 Providing and casting in situ the foundation bolt

grouting with "Conbextra" GP-2 nonshrink grout as
per manufactures specifications excluding the cost of
bolts and Including all materials,tools, pouring at Cum 0.21 49500.00 10346.00
specified. consistancy, cleaning etc.

25
Sl No. Description of work Unit Qty. Rate Amount
32 Providing and fixing with proper aligning in position
FOUNDATION BOLTS (including grouting) of sizes
ranging from 12mm to 50mm in diameter with washers,
nuts, including cost of threading etc., complete at all
heights.
No 64.00 130.00 8320.00
33 Providing and fixing M S 3.2 TH Rain water gutter
with all accessories such as MS clamps, coach screws,
brackets and supports, welding bolting and specials
necessary for fixing including scaffolding with all leads
and lifts etc., complete at all heights, FRP COATING IN
SIDE including two coats of anticorrosive paint over a Rmt #NAME? 770.00 #NAME?
34 coat or red-oxide
Providing primer
and fixing onforwall
MS clamps
surface &4MSkgsupporting
/ Sq.cm
members.
H.D.P.E. rain down water pipes 110 mm outer dia
approved make and brand with necessary specials like
shoes, bends and offsets fixed with iron clamps, wall
plugs, screws, including cost of materials, labour, curing Rmt #NAME? 427.00 #NAME?
complete as per specifications.
TOTAL AMOUNT #NAME?

26
 KIRLOSKAR FERROUS INDUSTREIS LTD, KOPPAL
BARRICATION FOR COKE OVEN PLANT
MEASURMENT SHEET - OPTION -1
Sl No. Description of work Unit No L B D Qty.
I EARTHWORK EXCAVATION &FILLING

1 Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits
either in pits or in trenches 1.5m and above in width, in soft soil not exceeding 1.5 m. in depth including
dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of
excavation with lead upto 50 m. after breaking of clods complete as per specifications. specification. No.
KBS 2.1(b) / 2.3.5
Footings 8 2.60 2.60 1.20 64.90
Cum Total 64.90

2 Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits
either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth
including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from
edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications.
specification.
Footings No. KBS 2.1(b) / 2.3.5 8 2.60 2.60 0.40 21.63
Cum Total 21.63

3 Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits
either in pits or in trenches 1.5m and above in width, in hard rock not exceeding 1.5 m. in depth
including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from
edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications.
specification. No. KBS 2.1(b) / 2.3.5
Footings 8 2.60 2.60 0.40 21.63
Cum Total 21.63

4 Filling available excavated earth (excluding rock) in sides of foundations upto plinth in layers not
exceeding 20 cms. In depth, compacting each deposited layer by ramming with mechanical vibrator
&vibro roller after watering with all lead & lift etc including cost of all labour complete as per
specifications.
Total excavation 108.16
Deduct
PCC 5.41
Footing 20.74
Pedestal up to GL P1 8 1.05 0.65 1.00 6.06
32.21
Cum Total 75.96

II CONCRETE WORK
5 Providing and laying in situ Plain Cement Concrete 1:4:8 of trap metal for foundation, floor bedding etc.
including dewatering, formwork, compacting and curing & placing etc. complete at all depths.

Footings 8 2.60 2.60 0.10 5.41

Cum Total 5.41

6 Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @
340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70 cum and fine
aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008 at
machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation
a for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters,
Pedestal
columnspillars,
P1 posts, struts, buttresses, bed blocks, anchor
8 blocks
0.950 & plinths
0.550 etc.,2.00
including cost
8.36of all
materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per
specifications Cum Total 8.36

7 Providing and laying in position reinforced cement concrete of Design mix M25 with OPC cement @
340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70 cum and fine
aggregtes @ 0.47cum, with super plasticisers @ 3 liters confirming to is 9103-1999 reafirmed-2008 at
machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation
for footings, pedastals, retaining walls, return walls, walls (any thickness) including attached pilasters,
columnspillars, posts, struts, buttresses, bed blocks, anchor blocks & plinths etc., including cost of all
materials, labour, HOM of machinery, curing, complete but excluding cost of reinforcement as per
a Raft
specifications

27
Sl No. Description of work Unit No L B D Qty.
F1 8 2.400 2.400 0.45 20.74
Cum Total 20.74

III CENTERING & SHUTTERING

8 Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for
foundations, footings, bases of columns for mass concrete including cost of all materials, labour
complete as per specifications.

F1 8 9.60 0.45 34.56

P1 8 3.00 2.00 48.00
Sqm Total 83.00

9 Providing T.M.T steel reinforcement for RCC work including straightening, cutting bending, hooking,
placing in position, lapping and/or welding wherever requried, tying with GI binding wire of 17 guage
and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and
a wastage shalland
For footings notpedastals
be measured and paid) cost of materials, labour, HOM of machinery complete as per
1750.00
specifications. Qty in kg 1750.00
Total Qty in Ton 1.750

10 Providing straightening, cutting fabricating and erecting M.S. STRUCTURAL STEEL in roof trusses,
column, portal frames, beams, bracing’s, platform, claddings, ladders, staircase, cleats, purlins,
protection angle, brackets, hangers, base plates, stiffeners plates, wind bracing’s, tie rods insert plates,
cable racks including wastage’s welding, bolting wherever necessary, and painting with one coat of red-
oxide paint & two coats of approved synthetic enamel paint with all leads & lifts etc., complete at all
heights.
Kgs 17192.68
Total Qty in kg 17192.68

VIII Roof and Floor works

11 Fixing of mesh with belt strip , fastners and tie rods.

1 42.00 14.20 596.40

Sqm Total 596.40

12 Providing and casting in situ the foundation bolt grouting with "Conbextra" GP-2 nonshrink grout as
per manufactures specifications excluding the cost of bolts and Including all materials,tools, pouring at
specified.
Pedestal consistancy, cleaning etc.
P1 8 0.95 0.55 0.05 0.21
Cum Total 0.21

13 Fixing with proper aligning in position FOUNDATION BOLTS (including grouting) of sizes ranging from
12mm to 50mm in diameter with washers, nuts, including cost of threading etc., complete at all heights.

M-36 8 6.00 48.00

M-25 8 2.00 16.00
No Total 64.00

M-36 48 11.00 528.00

M-25 16 4.50 72.00
Kg Total 600.00

28
 KIRLOSKAR FERROUS INDUSTREIS LTD, KOPPAL.
BARRICATION FOR COKE OVEN PLANT
STRUCTURAL STEEL QUANTITY(CONV)

Unit Steel in Total Steel

Sl.no Description Nos L B H/Thk Qty Unit
Weight Kgs in Kgs

1 Column 8
2 ISMC 200 2 14.700 29.400 22.3 kg/m 655.62 5244.96
8mm Thk Batten Plate up to 7.5 32 0.530 0.200 0.008 0.027 7850.0 kg/cum 213.02 1704.14

8mm Thk Batten Plate up to 32 0.330 0.200 0.008 0.017 7850.0 kg/cum 132.63 1061.07
7.5-15.0
Connection details
16mm thk Base Plate 1 0.900 0.500 0.016 0.007 7850.0 kg/cum 56.52 452.16
Stiffner 10mm thk 2 0.900 0.450 0.010 0.008 7850.0 kg/cum 63.59 508.68
2 0.300 0.450 0.010 0.003 7850.0 kg/cum 21.20 169.56

2 TIE BEAMS
ISMC 100 Box 28 5.800 162.400 9.56 kg/m 1552.54 1552.54
Connection details
10 mm plate 14 0.500 0.200 0.010 0.014 7850.0 kg/cum 109.90 109.90
10 mm plate 14 0.300 0.200 0.010 0.008 7850.0 kg/cum 65.94 65.94

3 BRACINGS
16 mm Dia 8 8.900 71.200 1.58 kg/m 112.50 112.50
8 9.400 75.200 1.58 kg/m 118.82 118.82
11100.27
4 PURLINS
C200x76x25.4x1.9 15 42.200 633.0 5.70 kg/m 3608.10 3608.10
ISMC 100 Bracket 240 0.300 72.000 9.56 kg/m 688.32 688.32
Stiffner 8 mm thk 120 0.430 0.200 0.008 0.083 7850.0 kg/cum 648.10 648.10
120 0.430 0.200 0.008 0.083 7850.0 kg/cum 648.10 648.10
5592.61
5 SAG RODS
16 mm Dia 196 196.000 2.55 kg/No 499.80 499.80
499.80

17192.68
17.19
 KIRLOSKAR FERROUS INDUSTREIS LTD, KOPPAL.
BARRICATION FOR COKE OVEN PLANT
STRUCTURAL STEEL QUANTITY (PEB)

Unit Steel in Total Steel

Sl.no Description Nos L B H/Thk Qty Unit
Weight Kgs in Kgs

1 Column 8
Up to 7.5 M
Flange plate 8mm 2 7.200 0.200 0.008 0.023 7850.0 kg/cum 180.86 1446.91
Web plate 6mm 1 7.200 0.600 0.006 0.026 7850.0 kg/cum 203.47 1627.78
Stiffner 6mm thk 6 0.600 0.200 0.006 0.004 7850.0 kg/cum 33.91 271.30

7.5 M to 15.0M
Flange plate 8mm 2 7.500 0.200 0.008 0.024 7850.0 kg/cum 188.40 1507.20
Web plate 6mm 1 7.500 0.450 0.006 0.020 7850.0 kg/cum 158.96 1271.70
Stiffner 6mm thk 5 0.600 0.450 0.006 0.008 7850.0 kg/cum 63.59 508.68

Connection details
16mm thk Base Plate 1 0.900 0.500 0.016 0.007 7850.0 kg/cum 56.52 452.16
Stiffner 10mm thk 2 0.900 0.450 0.010 0.008 7850.0 kg/cum 63.59 508.68
2 0.300 0.450 0.010 0.003 7850.0 kg/cum 21.20 169.56

2 TIE BEAMS
ISMC 100 Box 28 5.800 162.400 9.56 kg/m 1552.54 1552.54
Connection details
10 mm plate 14 0.500 0.200 0.010 0.014 7850.0 kg/cum 109.90 109.90
10 mm plate 14 0.300 0.200 0.010 0.008 7850.0 kg/cum 65.94 65.94

3 BRACINGS
16 mm Dia 8 8.900 71.200 1.58 kg/m 112.50 112.50
8 9.400 75.200 1.58 kg/m 118.82 118.82
9723.66
4 PURLINS
C200x76x25.4x1.9 15 42.200 633.0 5.7 kg/m 3608.10 3608.10
ISMC 100 Bracket 240 0.300 72.000 9.56 kg/m 688.32 688.32
Stiffner 8 mm thk 120 0.430 0.200 0.008 0.083 7850.0 kg/cum 648.10 648.10
120 0.430 0.200 0.008 0.083 7850.0 kg/cum 648.10 648.10
5592.61
5 SAG RODS
16 mm Dia 196 196.000 2.50 kg/No 490.00 490.00
490.00

15806.27
15.81
 KIRLOSKAR FERROUS INDUSTREIS LTD, KOPPAL.
BARRICATION FOR COKE OVEN PLANT
REINFORCEMENT STEEL QUANTITY
H
/
Sl.no Description Nos L B
T Qty Unit Unit Total Steel
h Weight in Kgs
k
1
Footings top & Bott 544 2.800 1523.200 0.617 kg/Rmt 939.81
Pedastals 128 2.400 307.200 1.580 kg/Rmt 485.38
Stirrups 104 2.750 286.000 0.395 kg/Rmt 112.97
208 1.420 295.360 0.395 kg/Rmt 116.67
104 2.250 234.000 0.395 kg/Rmt 92.43
1747.26
1.75