Unidades Interiores Ductos MHB
Unidades Interiores Ductos MHB
Unidades Interiores Ductos MHB
1. Features
The new designed high static pressure duct adopt the body of new concealed duct MTA3 (18000BTU/H
~36000BTU/H) and MTA(48,000~60,000BTU/H), the dimension is really more compact than the former
type MHA series.
18,000~36,000BTU/H 48,000~60,000BTU/H
96,000BTU/H
High-static pressure
Blowing pressure of Indoor Unit can reach 200Pa. The air conditioner delivers cold wind to every indoor
corner even the ceiling is super-high.
Multi-blowing outlets, to satisfy your fitment’s needs.
Indoor Unit can be installed in various ways to give you a creative space
2. Specification
Model MHB-18HR MHB-24HR
Power supply Ph-V-Hz 1,220-240V,50Hz 1,220-240V,50Hz
Capacity Btu/h 18,000 24,000
Capacity kW 5.4 7.1
Cooling Input W 1915 2530
Rated current A 8.6 12.4
EER Btu/w.h 9.4 9.5
Capacity Btu/h 20,500 27,300
Capacity kW 6 8
Heating Input W 2010 2500
Rated current A 8.9 11.5
COP Btu/w.h 10.2 10.8
Moisture Removal l/h 1.8 2.4
Max. input consumption W 2300 3300
Max. input current A 11.7 15.3
Starting current A 36.8 61
Model PH330X2CS-8 THU33WC6-U
Type ROTARY ROTARY
Brand MIDEA-TOSHIBA Hitachi
MIDEA-TOSHIBA
Hitachi(shanghai)
Supplier (Guangdong)
Capacity Btu/h 18834 28490
Compressor Input W 1870 2650
Rated current (RLA) A 8.75 12.6
Locked rotor Amp (LRA) A 36.8 62
Thermal protector INNER INNER
60μF/400V(220V)
Capacitor uF 50/370 μF/V 60μF/450V(240V)
Refrigerant oil ml ESTER OIL VG74 750 SUNISO-4GSI 1050
Model YSK74-4C YSK120-4C
Input W 170/150/133 170/150133
Indoor fan motor
Capacitor uF 6.5uF/450V 6.5uF/450V
Speed (hi/mid/lo) r/min 1100/1020/900 1100/1020/900
Number of rows 2 3
Tube pitch(a)x row pitch(b) mm 25.4×22 25.4×22
Fin spacing mm 1.7 1.7
Indoor coil Fin type Hydrophilic aluminium Hydrophilic aluminium
Tube outer dia. and type mm Ф9.53, innergroove tube Ф9.53,innergroove tube
Coil length x height x width mm 800×254×44 800×254×66
Number of circuits 3 3
3
Indoor air flow (H/M/L) m /h 1600/1400/1220 1680/1550/1280
190 High static pressure duct (new)
Capacitor uF / /
Refrigerant oil ml SONTEX 200 LT 1242 3GS 1360
Model YSK80-4X YSK80-4X
Input W 118/108/101 118/108/101
Indoor fan motor
Capacitor uF 5uF/450V 5uF/450V
Speed (hi/mid/lo) r/min 820/695/620 820/695/620
Number of rows 3 3
Tube pitch(a)x row pitch(b) mm 25.4×22 25.4×22
Fin spacing mm 1.7 1.7
Indoor coil Fin type Hydrophilic aluminium Hydrophilic aluminium
Tube outer dia. and type mm Ф9.54 innergroove tube Ф9.53 innergroove tube
Coil length x height x width mm 1150×254×44 1150×254×44
Number of circuits 4 4
3
Indoor air flow (H/M/L) m /h 2330/2150/1860 2330/2150/1860
Indoor external static pressure (Hi) Pa 100 100
Indoor noise level (Hi/Mid/Lo) dB(A) 49/47/44 49/47/44
Tube outer dia.and type mm Ф9.53, inner groove tube Ф9.53, inner groove tube
Coil length x height x width mm 888X1220X44 888X1220X44
Number of circuits 4 4
3
Outdoor air flow m /h 4900 4900
Outdoor noise level dB(A) 55 55
Dimension (W*H*D) mm 990X960X360 990X960X360
Packing (W*H*D) mm 1120X1090X435 1120X1090X435
Outdoor unit Net/ Gross weight kg 100/106 100/106
Refrigerant type/Quantity g 3100 3100
Design pressure (high side/low side) MPa 2.6/1.2 2.6/1.2
Liquid side mm(inch) φ12.7(1/2”) φ12.7(1/2”)
Gas side mm(inch) φ19(3/4”) φ19(3/4”)
Max. pipe length m 30 30
Refrigerant piping Max. difference in level m 20 20
Operation temp ℃ 17~30 17~30
Ambient temp ℃ -7~45 -7~45
2
Application area m 60~86 60~85
Qty’per 20’ /40’ /40'HQ set 24/52/62 24/52/62
Notes:
1. Nominal cooling capacities are based on the following conditions:
Indoor temp: 27°CDB, 19°CWB; Outdoor temp: 35°CDB; Equivalent ref. piping: 7.5m (horizontal)
2. Nominal heating capacities are based on the following conditions:
Indoor temp: 20°CDB; Outdoor temp: 7°CDB, 6°CWB; Equivalent ref. Piping: 7.5m(horizontal)
3. Actual noise level may differ, depending on the room structure, etc, since these noise values are from
an anechoic room.
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its
colorimetric method (gravity method) 50% or more.
5. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
Capacitor uF / /
Refrigerant oil ml 3GS 1360 SONTEX 200 LT 1774
Model YSK350-4 YSK350-4
Input W 118/108/101 324/264/223/186
Indoor fan motor
Capacitor uF 10uF/450V 10uF/450V
Speed (hi/mid/lo) r/min 820/695/620 870/770/700/630
Number of rows 3 3
Tube pitch(a)x row pitch(b) mm 25.4×22 25.4×22
Fin spacing mm 1.7 1.7
Indoor coil Fin type Hydrophilic aluminium Hydrophilic aluminium
Tube outer dia. and type mm Ф9.53 innergroove tube Ф9.53 innergroove tube
Coil length x height x width mm 1150×305×66 1150×305×66
Number of circuits 4 4
3
Indoor air flow (H/M/L) m /h 2500/2330/2100 3280/2850/2460
Indoor external static pressure (Hi) Pa 150 150
Indoor noise level (Hi/Mid/Lo) dB(A) 51/47/44 52/48/46
Tube outer dia. and type mm Ф9.53, inner groove tube Ф9.53, inner groove tube
Coil length x height x width mm 888X1220X44 897×1220×44
Number of circuits 4 4
3
Outdoor air flow m /h 4900 6000
Outdoor noise level dB(A) 55 62
Dimension (W*H*D) mm 990X960X360 940*1245*340
Packing (W*H*D) mm 1120X1090X435 1058*1370*435
Outdoor unit Net/ Gross weight kg 100/106 114/135
Refrigerant type/Quantity g 3100 5000
Design pressure (high side/low side) MPa 2.6/1.2 2.6/1.2
Liquid side mm(inch) φ12.7(1/2”) φ12.7(1/2”)
Gas side mm(inch) φ19(3/4”) φ19(3/4”)
Refrigerant Max. pipe length m 30 50
piping Max. difference in level m 20 20
Operation temp ℃ 17~30 17~30
Ambient temp ℃ -7~45 -7~45
2
Application area m 80~105 95~120
Qty’per 20’ /40’ /40'HQ set 23/47/50 21/44/50
Notes:
1. Nominal cooling capacities are based on the following conditions:
Indoor temp: 27°CDB, 19°CWB; Outdoor temp: 35°CDB; Equivalent ref. piping: 7.5m (horizontal)
2. Nominal heating capacities are based on the following conditions:
Indoor temp: 20°CDB; Outdoor temp: 7°CDB, 6°CWB; Equivalent ref. Piping: 7.5m(horizontal)
3. Actual noise level may differ, depending on the room structure, etc, since these noise values are from
an anechoic room.
4. Air filter is not standard accessory, but please mount it in the duct system of the suction side. Select its
colorimetric method (gravity method) 50% or more.
5. Capacities are net, including a deduction for cooling (an addition for heating) for indoor fan motor heat.
Model MHB-96HR
Power supply Ph-V-Hz 3N, 380V~, 50Hz
Capacity Btu/h 96000
Capacity kW 28.0
Cooling Input W 9100
Rated current A 16.8
EER Btu/w.h 10.5
Capacity Btu/h 107480
Capacity kW 31.5
Heating Input W 9000
Rated current A 16.5
COP Btu/w.h 11.9
Moisture Removal l/h 9.4
Max. input consumption W 11500
Max. input current A 21
Starting current A 58
Model JT160BCBY1L (2 sets)
Type SCROLL
Brand DAIKIN
Supplier DAIKIN(XI AN)
Capacity Btu/h 51180
Compressor Input W 4660
Rated current (RLA) A 8.6
Locked rotor Amp (LRA) A 65.8
Thermal protector Internal
Capacitor uF /
Refrigerant oil ml SUNISO 4GSDID-K 1500
Model RF25T1WN-A.DQ-1
Input W 645/532/410
Indoor fan motor
Capacitor uF 15uF/370-450V(VDE certification)
Speed (hi/mid/lo) r/min 900/820/680
Number of rows 2(rows)x2
Tube pitch(a)x row pitch(b) mm 22x25.4
Fin spacing mm 1.7
Indoor coil Fin type Hydrophilic aluminium
Tube outside dia. and type mm Ф9.53, innergroove tube
Coil length x height x width mm 1202x406x88
Number of circuits 1
3
Indoor air flow (H/M/L) m /h 6700/5500/4800
Indoor external static pressure (Hi) Pa 150/200/250
Indoor noise level (Hi/Mid/Lo) dB(A) 52
3. Dimensions
MHB-18HR MHB-24HR
MHB-36HR
MHB-48HR MHB-60HR
MHB-96HR
Front-panel and Air-outlet
Back-panel
4. Piping Diagrams
Capacity≤60000BTU/H
Heat pump
Outdoor unit Indoor units
condenser temp. sensor
Check valve
T3 T2 evaporator temp. sensor
4-way valve T4
filter stop valve T1
Throttle capiliary room temp. sensor
ambient temp. sensor
Muffle
stop valve
High pressure switch
T5
Discharge temp. sensor
compressor
low-pressure accumulator
Remark:
1. For MOU-09HR, MOU-12HR and MOU-18HR, accumulator is not included.
2. For MOU-36HR and MOU-48HR, MOU-60HR, check valve and auxiliary capillary is not included.
Capacity≥60000BTU/H
Outdoor unit Indoor units
compressor T1
room temp. sensor
throttle parts
System B
System A
Gas-liquid separator
T5
compressor
stop valve
Gas-liquid separator
5. Wiring Diagrams
MHB-18HR
Indoor unit
WH IT E WH IT E
BROWN
BLUE
B RO WN BL AC K
CA P1
L N 1 2( N)3 4 5 NET M ODULE
XT 1
Y /G TO CCM
K M1
RE D CN20
B RO W N
RE D BL AC K
XT 2
T3 E TO OUTDOOR UN IT POWER
TO OUTDOOR UNIT
(NO TE:P LEASE USE SHIELD LINE)
Outdoor unit:
B LA CK
CO MP RE SS O R
FA N C AP AC IT O R
C AP AC IT OR
B LU E( R) W HI T E( S)
W HI T E WH I TE
R S
Y /G CO MPR ES SO R
BLUE(N)
BL UE
F AN C
M OT OR
T EM P. SE NS OR 4- WA Y V AL VE
O F CO NDE NS AT O R
RE D( C)
(O UTD OO R UN IT )
X P1
BRO WN
GRE EN
X S1
1 N 3 4
XT 2 X T1
T3 E Y /G
XT3
WHITE(T3)
BLACK(E)
TO OUTDOOR
Outdoor unit
2 20 753 90 15
BLACK
FAN2 CAP1
BLACK OUTDOOR UNIT
M WIRING DIAGRAM
BLACK
WHITE
RED
RED
COMP COMP
XT7 C OMP Y/G CAP1 COMP CAP
KM8 C2 FAN CAP
C2 RED RED C FAN2 OUTDOOR FAN
RED XT3 5-WAY TERMINAL
XT4 6-WAY TERMINAL
RED
RED
RT3 BLACK XP1 CONNECTORS
XS1 CONNECTORS
XP1 RT3 TEMP.SENSOR
XS1 XT7 MID-TERMIANL
RED BLACK CONTACTOR
BLACK KM8
XT2 3-WAY TERMINAL
XT3
XT 2 XT4
T3 E L (1) N (1) Y/G 1 2 3 4 5 6
BROWN
GREEN
Y/G
BLUE
RED
Y/G Y/G
L N 1 2 3 FAN1 FAN2
BLACK
XT1
RED
CAP1 C AP2
POWER
SOM E A/ C EX CLUD E TH E MA TERI ALS
IND ICAT ED I N BR OKEN LIN E TA BLE,
TO OUTDOOR TO OUTDOO R PLE ASE REFE R TO THE ACT UAL P ROD UCT.
Outdoor unit:
2 2075 5 92 01
CAP1
B LUE
3 4 COMP S
5 6 HEAT
XS8 21 22
XP 8 Y&G
BROW N
H- PRO C2
RED KM 1 BL ACK(C) C
K1
L- PRO
WIRING DIAG RAM
OUTDOOR UN IT
R ED
XT5 CODE PART N AME
B LACK BROW N COMP COMP RESSOR
BLACK(HI)
CAP1
FAN2 OUTD OOR FA N
BLUE( N)
C2 OUTD OOR FA N C AP ACITOR
BLUE BLUE (N)
BLACK(L)
BLACK(L)
Y&G
RT3 PI PE T EMPERATUR E SEN SOR
XP8 CONN E CTOR
XS8 CONN E CTOR
T3 E L N 1 2 3 4 5 6
CN35~ 36 P.C .BO ARD TER MIN AL
XT3 CN37~ 38 P.C .BO ARD SOCK ET S
X T8 XT4 KM1 AC C O NTAC TOR
TO INDOOR UNIT XT3 5-W AY B IG GER TER MINAL
TO INDOO R UNIT
TO INDO OR UN IT XT4 6-W AY TERMI NAL
XT8 3-W AY TERMI NAL
XT5,X T6 CONN E CTOR
RT2
RT1 RED
BLUE
XP2
XP6
GREEN
YELLOW
BROWN
BLUE
RED
XS2 XS6
Y/G Y/G
A B C N 1 2 3 4 5 FAN1 FAN 2
X T1
WHI TE WHI TE W HITE
W HITE
P OWER
CAP1 C AP2
Outdoor unit:
2204449017
DISPLAY BOARD T O WIRE CONTROLLER
FA N1
BLACK
WHITE WHITE
RED
RED
A B C N 1 CAP1
X T1
Y/G Y/G
RT2
RT1 RED
BLUE
XP2
XP6
GREEN
YELLOW
BROWN
BLUE
RED
XS2 XS6
Y/G Y/G
A B C N 1 2 3 4 5 FAN1 FA N 2
X T1
WHI T E WHI TE W HITE
W HIT E
P OWER
CAP1 C AP2
Outdoor unit:
2 2 07 5 7 9 02 4
T5
H-P RO K1
WIRING DIA GRAM
MAIN CONTROL BOARD CODE PA RT NAME
CO MP COMPRESSOR
CN2 01 CN1 00 CN200 OUT DOOR FAN
R T4
R T3
T201 FAN3
BL ACK(L1 )
B LACK(L 2)
BL ACK(L3 )
BL AC K(H I) F AN CAP.
BL UE(N)
KM1
AC C ONTACTOR
BLACK (HI)
XT5 A1 KM 1
A2
RED( A1)
YELLO W
RED 1 2
BLAC K(L2) 3 4 HEA T CRANK
BLUE
BLUE
T3 T201
BLU E BL UE T2
COMP RT3
BLUE(N) H EAT RED PI PE TE MP. SENSOR
B LUE(N) T1
C AP3 XS8 -9 C ONNEC TORS
XT6
XP8 -9 CONNECTORS
BLUE(N) CN100-208 P .C.BO ARD S OCKETS
BLUE (N) BLA CK
K1 TEMP. PROTECT SWITCH
A B C N
XT4
1 2 3 4
XT3
Y/G RT4 ROOM TEMP. SENSOR
XT 3 5-WAY TERMINAL
T5 TRANSFORMER
Y/G
TO IND OOR TO IND OOR S.V 4-WAY VALVE
L-PRO LOW PRESSURE SWI TCH
(INDOOR UNIT)
RT2
RT1 RED
BLUE
XP2
XP6
GREEN
YELLOW
BROWN
BLUE
RED
XS2 XS6
Y/G Y/G
A B C N 1 2 3 4 5 FAN1 FAN 2
X T1
WHI TE WHI TE W HITE
W HITE
P OWER
CAP1 C AP2
Outdoor unit:
Outdoor unit:
2209509121 S.V2A
S.V2B
6. Capacity Tables
Model: MHB-18HR
Model:MHB-24HR
COOLING OUTDOOR TEMPERATURE DRY
Indoor
21ºC 25ºC 30ºC 35ºC 40ºC 45ºC
Conditions
Total capacity kW 6.79 6.50 6.26 5.91 5.67 5.49
21ºC D
Sensitive capacity kW 5.43 5.20 5.01 4.72 4.54 4.39
15ºC W
Input kW. 1.85 2.11 2.37 2.64 2.90 3.16
Total capacity kW 7.44 7.11 6.86 6.47 6.21 6.01
24ºC D
Sensitive capacity kW 5.95 5.69 5.48 5.17 4.97 4.81
17ºC W
Input kW. 1.95 2.23 2.51 2.78 3.06 3.34
Total capacity kW 8.08 7.73 7.45 7.03 6.75 6.54
27ºC D
Sensitive capacity kW 6.47 6.19 5.96 5.62 5.40 5.23
19ºC W
Input kW. 2.05 2.34 2.64 2.93 3.22 3.52
Total capacity kW 9.30 8.89 8.57 8.08 7.76 7.52
32ºC D
Sensitive capacity kW 7.44 7.11 6.86 6.47 6.21 6.01
23ºC W
Input kW. 2.36 2.70 3.03 3.37 3.71 4.04
Model: MHB-48HR
COOLING OUTDOOR TEMPERATURE DRY
Indoor
21ºC 25ºC 30ºC 35ºC 40ºC 45ºC
Conditions
Total capacity kW 13.59 13.00 12.53 11.82 11.35 10.99
21ºC D
Sensitive capacity kW 10.87 10.40 10.02 9.46 9.08 8.79
15ºC W
Input kW. 3.40 3.89 4.37 4.86 5.35 5.83
Total capacity kW 14.89 14.24 13.72 12.94 12.43 12.04
24ºC D
Sensitive capacity kW 11.91 11.39 10.98 10.36 9.94 9.63
17ºC W
Input kW. 3.59 4.10 4.62 5.13 5.64 6.16
Total capacity kW 16.18 15.48 14.91 14.07 13.51 13.09
27ºC D
Sensitive capacity kW 12.94 12.38 11.93 11.26 10.81 10.47
19ºC W
Input kW. 3.78 4.32 4.86 5.40 5.94 6.48
Total capacity kW 18.61 17.80 17.15 16.18 15.53 15.05
32ºC D
Sensitive capacity kW 14.89 14.24 13.72 12.94 12.43 12.04
23ºC W
Input kW. 4.35 4.97 5.59 6.21 6.83 7.45
Model: MHB-96HR
COOLING OUTDOOR TEMPERATURE DRY
Indoor
21ºC 25ºC 30ºC 35ºC 40ºC 45ºC
Conditions
Total capacity kW 27.05 25.87 24.93 23.52 22.58 21.87
21ºC D
Sensitive capacity kW 21.64 20.70 19.94 18.82 18.06 17.50
15ºC W
Input kW. 6.80 7.78 8.75 9.72 10.69 11.66
Total capacity kW 29.62 28.34 27.31 25.76 24.73 23.96
24ºC D
Sensitive capacity kW 23.70 22.67 21.84 20.61 19.78 19.17
17ºC W
Input kW. 7.18 8.21 9.23 10.26 11.29 12.31
Total capacity kW 32.20 30.80 29.68 28.00 26.88 26.04
27ºC D
Sensitive capacity kW 25.76 24.64 23.74 22.40 21.50 20.83
19ºC W
Input kW. 7.56 8.64 9.72 10.80 11.88 12.96
Total capacity kW 37.03 35.42 34.13 32.20 30.91 29.95
32ºC D
Sensitive capacity kW 29.62 28.34 27.31 25.76 24.73 23.96
23ºC W
Input kW. 8.69 9.94 11.18 12.42 13.66 14.90
7. Fan performances
MHB-18HR MHB-24HR
(mmH2O) (Pa) (mmH2O) (Pa)
100 100
10 10
90 90
80
70 70 High speed
High speed
60 60
5 50 5 50
20 3 20
Max air volume1600m /h Max air volume1680m 3/h
10 10
1000 1100 1200 1300 1400 1500 1600 1100 1200 1300 1400 1500 1600
Air volume(m3/h) Air volume(m3/h)
MHB-36HR
(mmH2O) (Pa)
100
10
90
High speed
80
External static pressure (Pa)
70
Medium speed
60
5 50
40
Low speed
Min air volume1650m 3 /h
30
20
Max air volume2330m 3 /h
10
(mmH2O) (Pa)
(mmH2O) (Pa)
150
150 15
15
140
140
High speed
130
130
High speed
120
120
110
110
100
100 10
10
90
90
80
80
70
70
Low speed
Low speed
60
60
5 50
5 50
40
40
Min air volume2100m 3/h
Min air volume1860m 3 /h
30
30
20 20
Max air volume3280 m 3 /h
Max air volume 2500m 3 /h
10 10
1900 2000 2100 2200 2300 2400 2200 2400 2600 2800 3000 3200
3
3
Air volume(m /h) Air volume(m /h)
(mmH2O) (Pa)
300
30
250
High speed
200
20
External static pressure (Pa)
150
Mid speed
Low speed
10 100
50
8. Electric Characteristics
Indoor Units Power Supply Indoor fan motor Power input(W)
Model
Hz Voltage Min. Max. MCA MFA kW FLA Cooling Heating
MHB-18HR 10.6 30 0.074 0.79 1915 2010
MHB-24HR 220~240 198 264 15.5 50 0.12 1.01 2530 2500
MHB-36HR 22.5 70 0.08 0.73 3830 3915
MHB-36HR 50 8.4 20 0.08 0.73 3790 3715
MHB-48HR 10.6 30 0.08 0.73 4895 5000
380 342 418
MHB-60HR 12.3 30 0.35 2.25 6315 6295
MHB-96HR 23.1 70 0.5 3.5 9100 9000
Symbols:
MCA: Min. Circuit Amps.
MFA: Max. Fuse Amps..
FLA: Full Load Amps.
Kw: Rate Motor Output
Notes:
7. Voltage range should not over the value of above table.
8. Maximum allowable voltage variation between phase is 2%
9. Selection wire size based on the larger value of MCA.
10. MCA/MFA
MCA = 1.25 × FLA
MFA ≤ 4 × FLA
(Next lower standard fuse rating min. 15A)
5. Instead of fuse, circuit breaker is also acceptable.
9. Sound Levels
Duct
1.0m
Microphone
Audibility limits of
Audibility limits of continuous white
continuous white sound
sound
Audibility limits of
Audibility limits of continuous white
continuous white sound
sound