Digital Door Lock User’S Guide

YDM4115

ISL-1591-01 ※ The functions and design of this product can be changed without prior notice for quality improvement.
 INTRO CONTENTS

For peace of mind, you need to secure yourself, your home and your personal belongings. Getting Started
Yale Digital Door Locks take care of all of this so that you can enjoy your life without any
worries. 4p Safety Cautions
In these products we have combined our long experience in making secure and reliable
5p Product Features
locks with the latest technology for convenience and safety.
6p Manual Guide

With all the functions for convenience and safety, Yale Digital Door Locks clearly offer you
more than just security. In addition to this, we have also put a lot of effort in the aesthetic Direction
design of these products, so that your Yale Digital Door lock can actually enhance the
8p Components Overview
appearance of your door while securing it at the same time.
9p Specification
The future of locking is already here and ready for use. Get rid of all your concerns 10p Identification
regarding the security of your home and use a Yale Digital Door Lock to unlock the door to 12p How to Use Normal Mode Change Mode I To Use Master PIN Code
the potential of Fingerprint Guide I Use Fingerprint

your life. Safety Mode Change Mode I To Use Master PIN Code
Fingerprint Guide I Use Fingerprint

Unlock your life! Open Door from Inside

Lock Door

20p Settings Safe Handle Feature I Volume Setting Feature

Auto / Manual Feature I Alarm Feature
Change to Fingerprint Mode I Voice / Melody Feature
Language Setting I Forced Lock
25p Safety Feature 3-minute Lock Feature I Open Door with false PIN code
http://www.yaledigital.com.cn (CHINA) Emergency mechanical key override

http://www.yalelock.com (APAC & EMEA)

Extra Features

26p Option Remote Control Module I Remote Control

28p Customer Service Emergency Power Supply for Discharged Batteries

Customer Service Request for Product Errors

29p Chinese manual

2/3
 Safety Cautions Product Features

Must Read This Please read this carefully for your own safety. Product Features Please read

Getting Started
Do not install the unit in Do not attempt to disassemble An infant and some users who One-touch Palm Touch
outdoor environment. the unit by yourself. That can have unusual fingerprints Fingerprint Feature
cause an electronic shock and (those which are difficult to Verification
product damage. register) may not be Method
registered for fingerprint (Easy Scan)
verification.
14P 13P

※ Scan-type fingerprint modules do

not recognize fingerprints with
water or foreign materials and set
off alarm sounds. Voice Guide Smart Pad
Feature Feature

Do not use force with a tool Please keep your PIN Code Make sure to lock the door
onto the product. safely. tight when you go out.
24P 26P

Yale Networking
Safety Mode
System (Option)

SAFE
16P 28P
Be careful not to hit the Keep foreign materials away Do not spray water directly to
handle as it may cause from the fingerprint sensor to the product or wipe it with
injuries. maintain it cleanly and do not chemical substances such as
use it with wet fingers. benzene, thinner, or alcohol
when cleaning the product.

Caution Make sure to follow the above instructions to avoid any injuries or damages on the properties .

4 /5
 Manual Guide

Front Body Icon EX

Getting Started
》Registering Master PIN Code (Normal Mode)
Lift the fingerprint cover open

{
Enter fingerprint Open the battery cover in the back body and
press (Registration) button once.
Keypad (10-Key)

User PIN Code Master PIN Code

Enter numbers 1
Fingerprint One time User
PIN Code PIN Code
Fake
Touch
PIN Code
Press the registered Master PIN Code (6 to 12 digits)
Button Button according to the voice guide.
(The default Master PIN Code is ‘1 2 3 4 5 6 7 8 9 0’)

Back Body Icon

Press the (Registration) button in the Back Body

again to complete the Master PIN Code registration.

{
Registration Button
(Open Battery Cover)
ⓐ ⓑ ⓒ
Auto / Manual Lock button
(Open Battery Cover) STEP ➞ ➞ ➞
(6 to 12)
Volume Control Switch
(Open Battery Cover)
Description
Manual thumb turn
ⓐ Open the battery cover in the back body and press (Registration) button once.
ⓑ Press the registered Master PIN Code (6 to 12 digits) according to the voice guide.
(The default Master PIN Code is ‘1 2 3 4 5 6 7 8 9 0’)
ⓒ Press the (Registration) button in the Back Body again to complete
the Master PIN Code registration.

6/7
 Components Overview Specifications

Basic Contents Specifications

Getting Started
The contents of this product may be subject to change without notice for performance or quality improvement.
Parts Specifications Remarks
》Basic Contents
76.6(W) × 334.6(H) × 28(D) mm, Operating temperature :
Front (Front Body)
Zinc die-casting -15~55℃ (5~131˚F)

76.6(W) × 304.6(H) × 35(D) mm,

Back (Main Body)
Fiber-glass

Lever Zinc die-casting

4EA 1.5V AA alkaline batteries Last up to 1 year

Battery
(Operating voltage: 4.5 ~ 6 V) (10 times used a day)

Lock case Steel and SUS304

Front (Front Body) Back (Main Body) Installation Template Lock case
Option Remote Control Wireless Optional

※ Battery life may vary depending on temperature, moisture levels,

frequency of use and the quality of the batteries.
4 Batteries ※ Please make sure that all parts are included when purchasing the product.
Emergency keys ※ Optional products may not be available depending on your country or local dealer.
Screws

Strike Plate Users Guide

》Option

- Remote control
- Remote control
module

8/9
 Identification

Front (Front Body, install on the outside of the door) Back (Back Body, install on the inside of the door)

Direction
Pull down Emergency Cover Lock Case

❼
❽ ❿
❶
❶

❷ ❼

❸
❾
❷
❹ ❻ ❸ ❽
❾
❺ ❶ Battery Cover
9V Emergency battery ❹
(Optional)
❷ Slot for Remote control module(Option)

❺ ❸ Registration button

❹ Lever

❶ Fingerprint Sensor ❻ ❺ Speaker Hole

❷ Fingerprint Wake Up Sensor ❻ Manual thumb turn

❸ Keypad (10-Key) ❼ 1.5V AA Alkaline Batteries

❹ Dead Bolt Jam Lamp ❽ Volume Control Switch

❺ Lever ❾ Auto / Manual Lock button

❻ Battery Change Lamp ❿ Latch Bolt

❼ Emergency Cover Edge Bolt

❽ Emergency Key Dead Bolt

❾ Emergency Power Supply Terminal

10 / 11
 How to Use Normal Mode

Change Mode The default setting is Normal Mode.

Getting Started
Description
ⓐ Open the battery cover in the back body and press (Registration) button once.
Safety Mode can be used for professional and high secure
Normal Mode ➞ Safety Mode management.
ⓑ Press the registered Master PIN Code (6 to 12 digits) according to the voice guide.
(The default Master PIN Code is ‘1 2 3 4 5 6 7 8 9 0’)
ⓒ Press the (Registration) button in the Back Body again to complete
➞ ➞ ➞ ➞ ➞ the Master PIN Code registration.
ⓓ Touch the keypad of the Front Body gently with your palm.
(NEW)

It enables you to make separate registration, and open a door

Safety Mode ➞ Normal Mode through the registered fingerprint or PIN Code. Note
- Make sure to leave the door open when registering a PIN Code because you may accidentally lock
a door while trying to register or change a PIN Code the first time.
➞ ➞ ➞ ➞ ➞ ➞
- The previously registered PIN Code will automatically be deleted when the new PIN Code is registered.
- When registering a PIN Code, the registered PIN Code will be displayed on the keypad (Smart Pad)
in sequential order and, then, be disappeared.
- The Master PIN Code is required to register or remove a fingerprint.
To Use Master PIN Code (PIN Codes should be selected from 6 to 12 digits. [*] and [#] are not allowed.)

》To Register Master PIN Code (Normal Mode)

ⓐ ⓑ ⓒ

➞ ➞ ➞

》To Open Door with PIN Code Check if a door opens!

Make sure to examine if the door opens normally with the
ⓓ registered password or fingerprint after the registration is
complete.

➞ ➞

12 / 13
 How to Use Normal Mode

Fingerprint Guide Use Fingerprint

Direction
It enables you to make separate registration, and open a door through the registered 》To Register Fingerprint
fingerprint or PIN Code. ⓐ
➞ ➞ ➞ ➞ ➞
Repeated Operations
(3 times)

》To Open Door with Fingerprint

1⃞ 2⃞ 3⃞
ⓑ ⓒ
➞

➞ ➞

Touch the Fingerprint Wake After the operation lamp is on, Press the outer
up sensor sweep the registered fingerprint handle down
through the fingerprint sensor in
the Front Body .
Description
ⓐ After the operation lamp is on, sweep your fingerprint 3 times through the fingerprint
sensor according to the voice guide.
ⓑ Lift open the fingerprint cover and wait for the operation lamp to light on.
Note ⓒ Sweep the registered fingerprint through the fingerprint sensor in the front body.

- You may register up to 20 fingerprints.

※Note that you may not register 20 fingerprints depending on the state of the previously registered fingerprints.
- Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials and
set off alarm sounds.
- Make sure to register a PIN Code just in case you fail to register a fingerprint.
Note
- Make sure to leave the door open when registering a PIN Code because you may accidentally lock a door - It enables you to make separate registration, and open a door through the registered to
while trying to register or change a PIN Code the first time. fingerprin or Master PIN Code.
- If an error occurs during registration, the process reverts back the beginning. (entering fingerprint). - Make sure to examine if the door opens normally with the registered PIN Code or
fingerprint after the registration is complete.
- If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration will be complete.
- Duplicate fingerprints may be registered.
- Same fingerprints can be registered repeatedly.

14 / 15
 How to Use Safety Mode

Change Mode The default setting is Normal Mode.

Getting Started
Description
ⓐ Open the battery cover in the back body and press (Registration) button once.
Safety Mode can be used for professional and high secure
Normal Mode ➞ Safety Mode management.
ⓑ Press the registered Master PIN Code (6 to 12 digits) according to the voice guide.
ⓒ Press the (Registration) button in the Back Body again to complete
the Master PIN Code registration.
➞ ➞ ➞ ➞ ➞
(NEW)

It enables you to make separate registration, and open a door Note

Safety Mode ➞ Normal Mode through the registered fingerprint or PIN Code. - Make sure to leave the door open when registering a PIN Code because you may accidentally lock
a door while trying to register or change a PIN Code the first time.
- The previously registered PIN Code will automatically be deleted when the new PIN Code is registered.
➞ ➞ ➞ ➞ ➞ ➞ - When registering a PIN Code, the registered PIN Code will be displayed on the keypad (Smart Pad)
in sequential order and, then, be disappeared.
- The Master PIN Code is required to register or remove a fingerprint.
- If you forget the PIN Code, you may not register or remove a fingerprint.
To Use PIN Code (PIN Codes should be selected from 6 to 12 digits. [*] and [#] are not allowed.) - It is advised to register the PIN Code with the same one as a PIN Code in case you lose it.

》Change Master PIN Code

ⓐ ⓑ ⓒ
➞ ➞ ➞ ➞ ➞ ➞ Caution
(NEW)
- When already Normal Mode, this process doesn’t work.
》Change User PIN Code Current Master PIN Code is changed to User PIN Code after changing mode. )
- kind of PIN Codes have to be different.
(There is an error if you try to register same PIN Code)
➞ ➞ ➞ ➞
- One time user PIN Cod is only used for one time.

》One Time User PIN Code

Check if a door opens!
Make sure to examine if the door opens normally with the
➞ ➞ ➞ ➞ ➞ ➞ registered password or fingerprint after the registration is
complete.

》To Open Door with PIN s Code

➞ ➞ or ➞ ➞ or ➞ ➞

16 / 17
 How to Use Safety Mode

Fingerprint Guide Use Fingerprint

Direction
》To Register Fingerprint
ⓐ ⓑ
➞ ➞ ➞ ➞ ➞ ➞ ➞
Repeated Operations
(01~20) (3 times)

》To Open Door with Fingerprint

1⃞ 2⃞ 3⃞ ⓒ ⓓ
➞

➞ ➞
Remove Fingerprint (Safety Mode)

》To Delete All Fingerprints

➞ ➞ ➞ ➞
Touch the Fingerprint Wake After the operation lamp is on, Press the outer
up sensor sweep the registered fingerprint handle down
through the fingerprint sensor in
》To Delete Each Fingerprints
the Front Body .
➞ ➞ ➞ ➞ ➞ ➞
(01~20)

Note Description
- You may register up to 20 fingerprints. ⓐ Enter 2-digit fingerprint number to register.(01~20)
※Note that you may not register 20 fingerprints depending on the state of the previously registered fingerprints. ⓑ After the operation lamp is on, sweep your fingerprint 3 times through the fingerprint
- Scan-type fingerprint modules do not recognize fingerprints with water or foreign materials and sensor according to the voice guide.
set off alarm sounds. ⓒ Lift open the fingerprint cover and wait for the operation lamp to light on.
- Make sure to register a PIN Code just in case you fail to register a fingerprint. ⓓ Sweep the registered fingerprint through the fingerprint sensor in the front body.
- Make sure to leave the door open when registering a PIN Code because you may accidentally lock a door
while trying to register or change a PIN Code the first time.
- If an error occurs during registration, the process reverts back the beginning. (entering fingerprint). Note
- If no more input is made for 20 seconds after registering at least 1 fingerprint, the registration will be complete.
- It enables you to make separate registration and deletion, and open a door only when the
- Duplicate fingerprints may be registered.
fingerprint number and the fingerprint match.
- Same fingerprints can be registered repeatedly.

18 / 19
 How to Use

Open Door from Inside Lock Door

Direction
》To Open Door with Lever 》To Close Door from Outside

Auto Lock status

Lower and push the interior handle
The built-in Auto Lock sensor automatically
at the same time. 5 Sec
locks a door within 5 seconds after the door
was closed.

(Closed) (Open) Manual Lock status

Touch the keypad in the front body gently

》To Open with Manual Device for Emergencies with your palm to lock a door.

Turn the Manual thumb turn to Open side.

Keep pressing the Safe Handle button.
And then, lower and push the handle at the 》To Close Door from Inside
same time. The Safe Handle button is found
Auto Lock status
on the interior handle.
(Closed) (Open) The built-in Auto Lock sensor automatically 5 Sec
locks a door within 5 seconds after the door
was closed.

Manual Lock status

Turn the Manual Open/Close Device to

Close side to lock a door.

Note Note
- Make sure to fully familiarize yourself with the operations for the Manual Device and - Even after a door was locked by the Auto Lock function,
the Safe Handle in preparation for emergencies. please check again if the door was completely closed and locked.

20 / 21
 Settings

Auto / Manual Feature Auto Lock setting locks a door within 5 seconds after the door was closed. Alarm Feature The alarm sound continues for 30 minutes or until it is reset.

Direction
》To Set Auto/Manual Feature 》Break-in / Damage Alarm

Auto Lock Setting Break-in:

Press the interior Auto/Manual Setting When someone tries to Break-in by opening
button to keep the button up. a door when it was locked, the alarm will go off.

Damage:
Manual Lock Setting
When the front body was damaged due to forced
Press the interior Auto/Manual Setting separation or drilling,the alarm will go off.
button to keep the button down.

》Release Trespass/Damage Alarm

Method 1: Enter the registered Master PIN Code or User PIN Code
Method 2: Enter the registered fingerprint.
Volume Setting Feature It enables you adjust the volume of various sounds from the product. Method 3:Press the interior button for 5 seconds.

》Volume Setting

To set volume switch

The operation sound volumes are adjusted
according to the Volume Switch Setting.
(2 : Louder / 1: Lower / 0 : Mute )

Note
- Even after a door was locked by the Auto Lock function, please check again if the door was completely locked.
Note - If a door is open when the Auto Lock is not properly operated, the Break-in alarm might go off.
- Be careful that the set bolt won’t detach when modifying the Safe Handle Setting. - If the alarm goes off due to damage, fire, or break in, the numbers on the keypad will light up clockwise.
- Even when the operation sound is set as ‘Mute’, the error and alarm sounds will go off. (It repeats the status for 30 minutes with alarm sound.)

22 / 23
 Settings

Voice / Melody Feature You may select the operation sound that is set off when a door is open and closed. Forced Lock

Direction
》To Set Voice/Melody Feature 》Outside Forced Lock Setting - Fingerprint
ⓐ ⓑ
➞ ➞ ➞ ➞ ➞
(5 sec)

》Outside Forced Lock Setting - PIN Code

Language Setting English and Chinese languages are supported.
ⓒ
➞ ➞ or ➞ ➞
》To Set Language
(5 sec) (5 sec)

➞ ➞ ➞ ➞

Description
ⓐ Enter the registered fingerprint on the fingerprint sensor when the operation lamp(LED) is on.
ⓑ Press the [ ] button for 5 seconds. (A beeping sound sets off for 3 times.)
ⓒ Touch the keypad of the front body gently with your palm.

Note

- If you try to open a door with the handle or the Manual Open/Close Device from inside when
the Outside Forced Lock is set, the alarm goes off.

24 / 25
 Safety Feature

3-minute Lock Feature At 3-minute Lock mode, no button, besides those in the back body, will work. Emergency mechanical key override

Direction
》3-minute Lock Mode Display 》Emergency mechanical key override

If a PIN Code or a fingerprint that is yet to be - Please operate the lock with the mechanical key when there is a problem to the lock or
registered is entered for 5 consecutive times, - Forgotten security code
3-minute Lock mode is on and nothing will - Electronic malfunction
work for 3 minutes.
(Wrong trial of PIN Code 5 times and 3 minute Lock starts. 2 minutes left. 1 minutes left.
Fingerprint 10 times) The number [3] The number [2] The number [1]
lights up. lights up. lights up.

》Release Trespass/Damage Alarm

Method 1: Press the interior button for 5 seconds.

Method 2: Turn the interior handle.
Pull down the Location of key hole Press the outer
emergency cover handle down
Open Door with fake PIN code Only Normal Mode.
It is the most effective feature when you are concerned about your PIN Code being accidentally exposed when you
have company or in the similar situations.

》To Open Door with false PIN code

ⓐ ⓑ ⓐ
➞ ➞ ➞ or ➞ ➞ ➞

Description
ⓐ Enter the fake PIN code
ⓑ Touch the keypad with your palm gently or press [ ] button to end.

Note Note
- 3-minute Lock mode won’t affect the alarm mode and is sustained even after the product is rebooted. - Keep the mechanical override key in a safe place.
- Once 3-minute Lock mode is on, the fake PIN code mode won°Øt work until the next normal verification - Otherwise, you may not get a free after-sales service even within during the warranty period.
(fingerprint verification, normal PIN Code, open door from inside). In this case,
please open a door with your correct PIN Code.

26 / 27
 Option

Remote Control Module Remote Control Not only FSK method but also the wireless encryption algorithm has been applied.

Extra Features
》Remote control Module 》To Register Remote Control
ⓐ
➞ ➞ ➞ ➞ ➞
Buy the Remote control Module and
install it to link the remote control.

》To Release Remote Control

➞ ➞ ➞ ➞

》Install Remote Control Module

1⃞ Remove batteries 2⃞ Install Remote Control Module

Open the battery cover Equip the Remote control
in the back body Module to the connector.
and remove
all batteries.

3⃞ Insert batteries 4⃞ Confirm the installation

Insert all the batteries by If you hear a ‘ting-a-ling’
checking the [ ⊕, ⊖ ] sound, the Remote control
connector. Module has been installed
correctly. Close the battery
cover.
Description
Ting-a-ling ⓐ Press the SET button of the remote control (Up to 5 Remote controls)

Note Note
- The operation status may only be examined through the remote control. - The wireless encryption algorithm resorts to the floating ID technology where the wireless
PIN Code is changed every time the remote control is operated.

28 / 29
 Emergency Power Memo

Emergency Power Supply for Discharged Batteries

Extra Features
You may open a door when contacting the 9V battery.

》To Supply Emergency Power

ⓐ ⓑ
➞ ➞ ➞
or

》To Replace Battery

1⃞ Expiry Period
The product uses four 1.5V alkaline AA batteries. One-on-one real-life size
They may sustain 1 year if used 10 times a day.
1.5V alkaline AA battery
(Users are advised to use authentic alkaline batteries.)

2⃞ Low Battery Alarm

You must replace all 4 batteries for the following cases: Low Battery Lamp (red)
- The Low Battery Lamp on the front body lights on
- The alarm melody goes off
(a nursery rhyme starting with ting-a-ling melodies)
- The voice guide goes off (“Please replace batteries.”)
front body

Description
ⓐ Open the emergency cover. Keep contacting the 9V battery onto the emergency power supply terminal.
ⓑ Press [ ] button. (Once the motor is fully operated, you may detach the 9V battery.)

Note
- The battery duration varies in the temperature, humidity, the number of use, and the quality of the battery.

30 / 31