Scribd
Upload
202 views12 pages

Indusoft PDF

This document provides instructions for configuring an OPC server and connecting an OPC client to that server through Indusoft Studio software. It describes how to create tags in the OPC server according to the configuration manual, activate the configuration file, create a new Indusoft project and define its location and target platform. It also explains how to insert an OPC communication component, select the OPC server, configure scanning settings, save the file, and set the OPC client to automatically start up.

Uploaded by

pancawawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
202 views12 pages

Indusoft PDF

This document provides instructions for configuring an OPC server and connecting an OPC client to that server through Indusoft Studio software. It describes how to create tags in the OPC server according to the configuration manual, activate the configuration file, create a new Indusoft project and define its location and target platform. It also explains how to insert an OPC communication component, select the OPC server, configure scanning settings, save the file, and set the OPC client to automatically start up.

Uploaded by

pancawawan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Configuration Manual For SCADA

Indusoft Studio v6.1


Configuration Manual for SCADA Table of Contents

Table of Contents

Chapter 1 Indusoft Web Studio v6.1 ................................................................................. 3


1-1 OPC Server ............................................................................................................ 4 
1-2 Connect OPC Client to OPC Server through Indusoft ............................................ 5 

2
Chapter 1
Indusoft Web Studio v6.1
Configuration Manual for SCADA Indusoft Studio v6.1

1-1 OPC Server

Please create tags according to the Configuration Manual.

Later, click [ File ] Æ [ Make Active ] to activate new created configuration file.

4
Indusoft Studio v6.1 Configuration Manual for SCADA

1-2 Connect OPC Client to OPC Server through Indusoft

Start Indusoft Studio v6.1, then click [ File ] Æ [ New ] to create a new project

Open the Project page to define the Location, Configuration file and Target platform.

5
Configuration Manual for SCADA Indusoft Studio v6.1

Open the [ Comm ] page in the Workspace

Select [ OPC ] pressing the right key and select [ Insert ].

6
Indusoft Studio v6.1 Configuration Manual for SCADA

The configuration of SCADA

Column Description
Description Notation
Server Identifier Select the OPC Server to be connected
with.
Disable Disable the communication
Read Update Rate (ms) Communication Rate
Percent Deadband Deadband
Status Communication Status
Remote Server Name Remote OPC Server (IP or User Name)

7
Configuration Manual for SCADA Indusoft Studio v6.1

To connect OPC Server tags to SCADA. Move the cursor to the [ Tag Name ] pressing the
right key and select [ Insert Tag ].

Select the Tag to be connected with.

8
Indusoft Studio v6.1 Configuration Manual for SCADA

Press the right key on the [ Item ] space and then select [ OPC Browser ] to select the OPC
Server tags.

Select the tag you need, then click [ OK ].

9
Configuration Manual for SCADA Indusoft Studio v6.1

Press the right key on the [ Scan ] space to display the pulldown Menu, then select
[ Always ].

Click [ File ] Æ [ Save ] to save the settings as a new file.

10
Indusoft Studio v6.1 Configuration Manual for SCADA

Select [ Project ] Æ [ Status ] in OPC Client page.

Select「OPC Client Runtime」Æ「Startup」

11
Configuration Manual for SCADA Indusoft Studio v6.1

Please select [ Automatic ] and then click [ OK ].

Normal connection

12

You might also like