Scribd Logo
Upload

Welcome to Scribd!

  • 147 views

    Drop Wire (DW) Cable - 4 Core - Specifications PDF

    Uploaded by

    inti lestari
    This document describes the specifications for an aerial drop cable that contains 4 single-mode optical fibers. The cable uses G.657A fibers with a steel wire strength member and low smoke zero halogen outer sheath. It has a nominal diameter of 2.0x5.1 mm, weighs approximately 23 kg/km, and can withstand a maximum pulling tension of 600N. The cable must pass various tests for tensile strength, crush resistance, kinking, and temperature cycling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Drop Wire (DW) Cable - 4 Core - Specifications PDF

    Uploaded by

    inti lestari
    147 views3 pages
    This document describes the specifications for an aerial drop cable that contains 4 single-mode optical fibers. The cable uses G.657A fibers with a steel wire strength member and low smoke zero halogen outer sheath. It has a nominal diameter of 2.0x5.1 mm, weighs approximately 23 kg/km, and can withstand a maximum pulling tension of 600N. The cable must pass various tests for tensile strength, crush resistance, kinking, and temperature cycling.

    Original Title

    Drop Wire (DW) Cable_4 Core_Specifications.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the specifications for an aerial drop cable that contains 4 single-mode optical fibers. The cable uses G.657A fibers with a steel wire strength member and low smoke zero halogen outer sheath. It has a nominal diameter of 2.0x5.1 mm, weighs approximately 23 kg/km, and can withstand a maximum pulling tension of 600N. The cable must pass various tests for tensile strength, crush resistance, kinking, and temperature cycling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    147 views3 pages

    Drop Wire (DW) Cable - 4 Core - Specifications PDF

    Uploaded by

    inti lestari
    This document describes the specifications for an aerial drop cable that contains 4 single-mode optical fibers. The cable uses G.657A fibers with a steel wire strength member and low smoke zero halogen outer sheath. It has a nominal diameter of 2.0x5.1 mm, weighs approximately 23 kg/km, and can withstand a maximum pulling tension of 600N. The cable must pass various tests for tensile strength, crush resistance, kinking, and temperature cycling.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Aerial Drop Cable

    Cable Design
     SM Fibers: G.657A
     Strength Member: Steel wire
     Outer Sheath: Black LSZH.
     Messenger wire: self-supporting member, single steel wire
    4 Fiber Drop Cable:

    Messenger wire

    Outer sheath
    Steel wire

    Steel wire UV fiber

    Cable Cores 4
    Nominal size of messenger wire mm 1.2mm
    Cable Diameter (approx.) mm 2.0×5.1
    Cable Weight(approx.) Kg/km 23
    Nominal cable length km 1
    Maximum pulling tension (short term) N 600

    Cable main mechanical properties and application


    Serial No. Item Requirement
    1 Allowable crush resistance (N) (short term) 2000N /10cm
    2 Operation temperature -20ºC~60 ºC
    3 Bending radius 30mm(dynamic) 15mm(static)

    Sheath Marking
    The outer sheath is marked in 1 meter intervals as follows:

    FIBERHOME GJYXCH <fiber count> G657 DROP CABLE 2017 <meter marking>

    Main Mechanical and Environmental Characteristics ( drop cable)


    Test Test Standard Acceptance Criteria
    TIA/EIA-455-33A/IEC 60794-1-2-E1A Max. attenuation increase ≤0.1
    Tensile
    Tensile load: Max. pulling tension dB at 1550nm
    TIA/EIA-455-41A/IEC 60794-1-2-E3 Max. attenuation increase ≤0.1
    Crush
    Allowable crush resistance (N) (short term) dB at 1550nm
    Kink IEC 60794-1-2-E10 No fiber break
    TIA/EIA-455-3A/IEC 60794-1-2-F1 Max. attenuation increase ≤0.1
    Temperature Cycling
    Temperature: -20℃～+60℃ dB
    Duct Drop Cable
    Cable cross-section and dimensions
     SM Fibers: G.657A
     Strength Member: Steel wire
     Outer Sheath: Black LSZH.
    4 Fiber Drop Cable:

    Outer Sheath
    Steel wire

    UV Fiber
    Steel wire

    Cable Cores 4
    Cable Diameter (approx.) mm 2.0×3.0
    Cable Weight(approx.) Kg/km 10
    Nominal cable length km 2
    Maximum pulling tension (short term) N 200

    Cable main mechanical properties and application


    Serial No. Item Requirement
    1 Allowable crush resistance (N) (short term) 2000N /10cm
    2 Operation temperature -20ºC~60 ºC
    3 Bending radius 30mm(dynamic) 15mm(static)

    Sheath Marking
    The outer sheath is marked in 1 meter intervals as follows:

    FIBERHOME GJXH <fiber count> G657B DROP CABLE 2017 <meter marking>

    Drum Marking
    The drum will be wooden drum with protection
    Drum marking will comply with custom’s requirement.

    Main Mechanical and Environmental Characteristics ( drop cable)


    Test Test Standard Acceptance Criteria
    TIA/EIA-455-33A/IEC 60794-1-2-E1A Max. attenuation increase ≤0.1
    Tensile
    Tensile load: Max. pulling tension dB at 1550nm
    TIA/EIA-455-41A/IEC 60794-1-2-E3 Max. attenuation increase ≤0.1
    Crush
    100N/cm dB at 1550nm
    Kink IEC 60794-1-2-E10 No fiber break
    TIA/EIA-455-3A/IEC 60794-1-2-F1 Max. attenuation increase ≤0.1
    Temperature Cycling
    Temperature: -20℃～+60℃ dB
    Color Code of Optical Fiber

    Number 1 2 3 4

    Color Blue Orange Green Brown

    Cabled Fiber Performance （G.657A）


    Characteristics Acceptance Value
    @1310nm ≤0.4dB/km
    @1383nm ≤0.4dB/km
    Attenuation
    @1550nm ≤0.3dB/km
    @1625nm ≤0.4dB/km
    Point discontinuity in attenuation ≤0.1dB/km
    Mode Field Diameter @1310nm 8.8±0.4μm
    Radius 15 10 7.5
    Macrobend loss
    Number of turns 10 1 1
    performance of optical
    Maximum at 1550nm 0.03 0.1 0.5
    fiber
    Maximum at 1625nm 0.1 0.2 1.0
    @1285~1330nm ≤3.5ps/(nm ·km)
    2
    Dispersion
    @1550nm ≤18ps/(nm2·km)
    M 20 cables
    PMDQ Q 0.01%
    Maximum PMDQ 0.2ps/√km
    Zero-Dispersion wavelength 1300nm～1324nm
    Zero-Dispersion slope ≤0.092ps/(nm2·km)
    Cable cut-off wavelength λcc(nm) ≤1260nm
    Cladding diameter 125±0.7μm
    Colored fiber diameter 250±15μm
    Cladding non-circularity ≤0.8%
    Core/cladding concentricity error ≤0.5μm
    Proof stress ≥0.69GPa(100kpsi)

    You might also like