ZU4T-Series, Electric Torque Wrench Pumps Hydraulic Technology Worldwide

 ZU4204TE-EHK (shown with optional heat exchanger and skidbar)

Tough, Dependable and

Innovative

Back-lit LCD and

Pressure Transducer

• Digital read-out and

“Autocycle” setting
• Pump usage information, hour and
cycle counts
• Low-voltage warning and recording
• Self-test and diagnostic capabilities
• Information can be displayed in
English, French, German, Italian,
Spanish and Portuguese
• Can be used with any brand of 700 or 800 bar single- and • Pressure transducer is more accurate
double-acting hydraulic torque wrenches and durable than analog gauges
• Easy-viewing variable rate display
• LCD provides self test, diagnostic and read-out capabilities • Display pressure in bar, MPa or psi.
• Auto cycle feature provides continuous cycle operation as
long as the advance button is pressed (pump can be used
with or without auto cycle feature)
• Available with 4-wrench manifold for simultaneous
operation of multiple torque wrenches
• Powerful 1,25 kW universal electric motor provides high
power-to-weight ratio
• High-strength, moulded composite shroud protects motor
and electronics, while providing an ergonomic, non-
conductive handle for easy transport.  Any brand of hydraulic torque wrench can be
powered by the portable ZU4T-Series torque
wrench pump.

216 www.enerpac.com
 Hydraulic Torque Wrench Pumps
ZU4T-Series Pump
Applications
make it ideal for applications which
require easy transport of the pump. ZU4T
It utilizes a universal motor which Series
will work well on long extension
The ZU4T-Series pump is best cords or generator driven electrical
suited to power medium to large power supplies.
size torque wrenches or hydraulic
tools, or wherever high speed, For further application assistance
intermittent duty cycle is needed. contact your local Enerpac office.
Reservoir Capacity:
Patent-pending Z-Class
technology provides high by-pass 4 and 8 litres
pressures for increased
Flow at Rated Pressure:
productivity. Its high power to
weight ratio and compact design 0,9 - 1,0 l/min
Motor Size:
1,25 kW
Torque Wrench Pump Maximum Operating Pressure:
Selection Matrix
For optimum speed and
700 and 800 bar
performance see the torque
wrench, pump and hose
selection matrix.
Page: 212

 SELECTION CHART

BASIC PUMP TYPES Pump Type Maximum Motor Usable Model

For technical information see options and Operating Voltage Oil Number 1)
specifications: Pressure (1,25 kW) Capacity
2)

Page: 218 (bar) (litres) (kg)

800 bar Pumps for Enerpac SQD and HXD- 800 115 V / 1ph 4,0 ZU4204TB-E 32
Series torque wrenches 800 115 V / 1ph 8,0 ZU4208TB-E 36
• Ideal for bolting applications that require remote 800 230 V / 1ph 4,0 ZU4204TE-E 32
pump and valve operation. 800 230 V / 1ph 8,0 ZU4208TE-E 36
• Motor on/off and valve control in pendant.
Pressing up arrow advances wrench, releasing
up arrow retracts wrench (auto cycle off).
• Low-voltage control pendant with 6m cord for
remote motor and valve operation.

700 bar Pumps for all Enerpac S and W-Series 700 115 V / 1ph 4,0 ZU4204TB-Q 32
and other brands of torque wrenches 700 115 V / 1ph 8,0 ZU4208TB-Q 36
• Ideal for bolting applications that require remote 700 230 V / 1ph 4,0 ZU4204TE-Q 32
pump and valve operation. 700 230 V / 1ph 8,0 ZU4208TE-Q 36
• Motor on/off and valve control in pendant.
Pressing up arrow advances wrench, releasing
up arrow retracts wrench (auto cycle off).
• Low-voltage control pendant with 6m cord for
remote motor and valve operation.

1) All models meet CE safety requirements and all CSA requirements.

2) Subtract 1 kg per litre oil for competitive weight comparison.
217
 ZU4T-Series, Torque Wrench Pump Options Hydraulic Technology Worldwide

Skidbar 4-Wrench Manifold Heat Exchanger

• Provides greater pump • For simultaneous operation of • Removes heat from the bypass
stability on soft or uneven multiple torque wrenches oil to provide cooler operation
surfaces, and easy two-hand • Can be factory installed or ordered • Stabilizes oil viscosity,
lift. separately. increasing oil life and reduces
wear of pump and other
hydraulic components.

Accessory For ZU4T-Series pumps Accessory Can be used on ZU4T-Series Accessory Can be used on ZU4T-Series
Kit Nr. * with reservoir Kit Nr. * torque wrench pumps Kit Nr. * torque wrench pumps

SBZ-4 4-8 ltr, without heat exchanger ZTM-UE for 800 bar torque wrenches ZHE-U4 4-8 litres reservoir
SBZ-4L 4-8 ltr, with heat exchanger ZTM-U4Q for 700 bar torque wrenches * Add suffix H for factory installation.
Heat Exchanger adds 4,1 kg to
* Add suffix K for factory installation. * Add suffix M for factory installation. pump weight.
Skidbar weight 2,2 and 3,2 kg.

Thermal Max. Max. Vol-

Transfer * pressure oil flow tage

Btu/h kJoule (bar) (l/min) (VDC)

900 950 20,7 26,5 12
* At 1,9 l/min at 21 °C ambient
temperature.

Do not exceed maximum oil flow

and pressure ratings. Heat
exchanger is not suitable for water-
glycol or high water based fluids.

 Any hydraulic torque wrench can be

powered by the Enerpac ZU4T-Series
torque wrench pump.

218
 ZU4T-Series, Ordering Matrix & Pump Specifications
 This is how a ZU4T-Series pump model number is built up:
ZU4T
Z U 4 2 08 T E - Q H M Series
1 2 3 4 5 6 7 8
Product Motor Flow Valve Reservoir Valve Voltage Factory installed features
Type Type Group Type Size Operation and options

1 Product Type 6 Valve Operation

Z = Pump Class T = Solenoid valve with pendant Reservoir Capacity:

2 Prime Mover
and LCD Electric. 4 and 8 litres
U = Universal electric motor 7 Voltage Flow at Rated Pressure:

3 Flow Group
B = 115V, 1 phase, 50/60 Hz
E 2) = 208-240V, 1 phase, 50/60 Hz
0,9 - 1,0 l/min
4 = 1,0 l/min @ 700 bar (with European plug EMC) Motor Size:
0,9 l/min @ 800 bar
2) E-voltage meet all CE requirements.
1,25 kW
4 Valve Type 8 Factory installed features & options Maximum Operating Pressure:
2 = Torque wrench valve E 3) = 800 bar coupler for use with HXD-, 700 and 800 bar
SQD-Series or other wrenches
5 Reservoir Size Q 3) = 700 bar coupler for use with
04 = 4 litres useable oil S- and W-Series or other wrenches
08 = 8 litres useable oil H = Heat exchanger
K = Skidbar
M = 4-wrench manifold.
3) Must be E or Q

 PERFORMANCE CHART
ZU4T-Series Hydraulic Torque Wrench Pumps How to order your ZU4T-Series
Motor Output Flow Rate Relief Pump Motor 1) Cur- torque wrench pump
Size Valve Suffix Electrical rent
(l/min) Adjustment Specification Draw
7 50 350 700 800 Range
(kW) bar bar bar bar (bar) (Volts-ph-Hz) (A)
Ordering Example 1
bar
Model Nr. ZU4204TE-EHK
115-1-50/60 21 800 bar pump for use with Enerpac HXD
1,25 11,5 8,8 1,2 1,0 – 70-700 Q
230-1-50/60 11 and SQD-Series or other 800 bar torque
115-1-50/60 24 wrenches, 230V motor, 4 litres reservoir,
1,25 11,5 8,8 1,2 1,0 0,9 70-800 E
230-1-50/60 11 optional heat exchanger and skidbar.
1) Isolation- and protectionclassification IPX4 / NEMA 3R.
Sound Level 85-90 dBA. Ordering Example 2
Model Nr. ZU4208TB-QMHK
700 bar pump for use with Enerpac S
and W-Series and other 700 bar torque
wrenches, 115V motor, 8 litres reservoir,
A
4 wrench manifold, heat exchanger and
93
skidbar.
700 bar 4-wrench
manifold (Q)
B Refer to the torque wrench pump
selection matrix for optimum wrench,
229 pump and hose combinations.
C 95 12
181 414 45 D
483 240 93
635 267
800 bar 4-wrench
manifold (E)
ZU4T-Series Torque Wrench Pumps
Reservoir Size A B C D  User adjustable relief valve.
(useable litres)  Heat Exchanger.
4,0 432 142 279 152  Skidbar.
8,0 495 203 287 167  4-wrench manifold. Page: 212

www.enerpac.com 219