Scribd
Upload
356 views1 page

Pro Trimor Midcast

Tri-Mor Midcast is a 1500°C high alumina castable with excellent working properties, high strength, and good abrasion resistance. It has characteristics that have made it popular for a wide range of applications worldwide. The castable has a hydraulic bond, calcined bauxite raw material base, maximum service temperature of 1500°C, and refractoriness of 1750°C. Physical properties testing shows high cold crushing strength and low permanent linear change up to 1300°C.

Uploaded by

WangGuolei王国磊
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
356 views1 page

Pro Trimor Midcast

Tri-Mor Midcast is a 1500°C high alumina castable with excellent working properties, high strength, and good abrasion resistance. It has characteristics that have made it popular for a wide range of applications worldwide. The castable has a hydraulic bond, calcined bauxite raw material base, maximum service temperature of 1500°C, and refractoriness of 1750°C. Physical properties testing shows high cold crushing strength and low permanent linear change up to 1300°C.

Uploaded by

WangGuolei王国磊
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Tri-Mor Midcast

Product Data

A 1500°C high alumina castable with excellent working properties, high strength and good abrasion resistance.
Its superior characteristics have made this product a firm favourite in a vast range of applications worldwide.

Characteristics
Bond Type Hydraulic
Raw Material Base Calcined Bauxite
Maximum Service Temperature °C 1500
Refractoriness °C (Seger Cone) 1750 (34)
Bulk Density kg/m3 Dried to 110°C 2560
Net Material Required Cast (Gunned) kg/m3 2500 (n/a)

Physical Properties
Test Temperature Cold Crushing Strength Permanent Linear Change
°C N/mm2 %
110 45 nil
800 40 -0.1
1000 23 -0.2
1300 23 +0.8
1500 45 -1.8

Thermal Conductivity at mean temp. 600°C (W/mK) 1.31

Chemical Analysis (%) Water Addition


Al2O3 76 % by weight 11-13
SiO2 6 Litres/25kgs 2.75-3.25
CaO 8.8
Fe2O3 5.0 Samples Prepared By : Hand Casting
Cr2O3 -
SiC - Reference No. TMD628/01/5
P2O5 -
MgO -

The above data is determined by regular sample testing in accordance with British Standard 1902 (where applicable).
Because normal manufacturing tolerances apply, the data should not be taken as a precise specification.

Your local contact :-

ISO 9002 Approved

Thermal Ceramics Offices


Thermal Ceramics UK (Plant) Thermal Ceramics Italiana (Plant)
Commercial Road Via Delle Rogge 6 Dalian Morgan Refractories Ltd (Plant)
Bromborough, Wirral 20071 Casalpusterlengo 931 Xinan Road
CH62 3NL England LO, Italy Shahekou District, Dalian, 116033
T: 44 0 151 334 4030 F: 44 0 151 343 5437 T: 39(0377) 922400 F: 39(0377) 910830/832062 Peoples Republic of China
E-mail: [email protected] E-mail: [email protected] T: 86 (41) 1665 1508 F: 86 (41) 1666 5478
E-mail: [email protected]
Website: www.thermalceramics.com

Thermal Ceramics Code 2-2-06

You might also like