SOLENOID VALVES NC

2 2
2/2
Series
direct operated
1/8 - 1/4
1

3
1
256
NO -
1

FEATURES
• Wide range of flow and pressure ratings
• Quick disassembly of core tube for easy maintenance of internal parts
• Standard disc seal made of FPM suitable for a wide range of operating tempera-
tures and compatible with many fluids
• Standard manual operator allows an easy installation (Except 4 and 5 mm orifice
sizes)
• AC/DC interchangeability of the solenoid without disassembly of the valve
• Compliance with UL and CSA standards (coil 4/6,9 W)
• Compact and low weight valve
• The solenoid valves satisfy all relevant EU directives
GENERAL
Differential pressure See «SPECIFICATIONS» [1 bar =100 kPa]
Maximum viscosity 40 cSt (mm2/s)
Response time 5 - 10 ms
fluids () temperature range (TS) seal materials ()
air, inert gas, water, oil -10°C to +100°C FPM (fluoroelastomer)

MATERIALS IN CONTACT WITH FLUID

() Ensure that the compatibility of the fluids in contact with the materials is verified
Brass body Stainless steel body
Body Brass AISI 316
Core tube Stainless steel Stainless steel
Core and plugnut Stainless steel Stainless steel
Springs Stainless steel Stainless steel
Seat Brass Stainless steel
Seals FPM FPM
Disc FPM FPM 2 1
Shading coil Copper Copper NC function
ELECTRICAL CHARACTERISTICS 3
Coil insulation class F
Connector Spade plug (cable Ø 6-8 mm or Ø 6-10 mm)
Connector specification DIN 43650, 11 mm, industry standard B (type 01)
or ISO 4400 / EN 175301-803, form A (type 02)
Electrical safety IEC 335
Electrical enclosure protection Moulded IP65 (EN 60529)
Standard voltages DC (=) : 24V - 48V
(Other voltages and 60 Hz on request) AC (~) : 24V - 48V - 115V - 230V / 50 Hz
power ratings operator
ambient replacement coil 2 1
prefix inrush holding hot/cold temperature type (1)
option ~ ~ = range (TS) ~ = NO function
(VA) (VA) (W) (W) (C°) 230 V/50 Hz 24 V DC
12 6 4 5 / 6,9 -10 to +60 400127-197 400127-142 01
SC
Availability, design and specifications are subject to change without notice. All rights reserved.

15 7 5 4/5 -10 to +60 400727-117 400727-185 02

Refer to the dimensional drawings on the following page.
(1)

SPECIFICATIONS
operating pressure options
flow differential (bar) catalogue
pipe orifice power coil number
coefficient
size size max. (PS) (W)
Kv
EPDM

min. air () water () oil () brass stainless steel
G (mm) (m3/h) (l/min) ~ = ~ = ~ = ~ = ~/= ~/=
NC - Normally closed
1,2 0,05 0,8 0 28 20 28 20 28 20 4 6,9 SCG256B001VMS SCG256B013VMS E - -
1,6 0,08 1,33 0 20 12 20 12 20 12 4 6,9 SCG256B002VMS SCG256B014VMS E - -
1/8
2,0 0,11 1,83 0 15 6 15 6 15 6 4 6,9 SCG256B003VMS SCG256B015VMS E - -
2,4 0,13 2,16 0 12 4 12 4 12 4 4 6,9 SCG256B004VMS SCG256B016VMS E - -
20 12 20 12 20 12 4 6,9 SCG256B402VMS SCG256B414VMS - - -
1,6 0,08 1,33 0
20 15 20 15 20 15 5 5 SCG256B466VMS SCG256B434VMS - - -
12 4 12 4 12 4 4 6,9 SCG256B404VMS SCG256B416VMS - - -
1/4 2,4 0,16 2,67 0
15 8 15 8 15 8 5 5 SCG256B470VMS SCG256B436VMS - - -
4 0,33 5,5 0 5 2 5 2 5 2 5 5 SCG256B471V - - - -
00029GB-2017/R01

5 0,45 7,5 0 3 1 3 1 3 1 5 5 SCG256B472V - - - -

NO - Normally open
1/8 1,2 0,05 0,8 0 10 10 10 10 10 10 4 6,9 SCG256B006VMS SCG256B018VMS E - -

All leaflets are available on: www.asco.com

Solenoid Valves (2/2) - 3
 SOLENOID VALVES SERIES 256
OPTIONS
• Valves can also be supplied with EPDM (ethylene-propylene) seals and discs. Use the appropriate optional suffix letter for
identification (1/8 version only)
• Explosionproof enclosures for use in zones 1/21-2/22, categories 2-3 to ATEX Directive 2014/34/EU (www.asco.com)
• Flying leads coil, use prefix L (e.g.: LG256B001VMS) (4 W/6,9 W coil only)
• Oxygen service with seals and disc in FPM, suffix NV, example: SCG256B001NVMS
• Solenoid valves integrated on manifold, orifice sizes 1,2 - 1,6 - 2 - 2,4 mm (www.asco.com)
• Without manual operator, on request
• Other pipe connections are available on request
• Connector with visual indication and peak voltage suppression or with cable length of 2 m (www.asco.com)

INSTALLATION
• The solenoid valves can be mounted in any position without affecting operation
• Solenoid valves have 2 mounting holes in body
• Pipe connection identifier is G = G (ISO 228/1)
• Installation/maintenance instructions are included with each valve
ORDERING EXAMPLES:
SC G 256 B 001 VMS 230V / 50 Hz
SC G 256 B 002 EMS 115V / 50 Hz
SC G 256 B 014 NVMS 24V / DC
SC G 256 B 001 FWMS 24V / DC
SC G 256 B 471 V 230V / 50 Hz
SC G 256 B 006 VMS 230V / 50 Hz

prefix
pipe thread voltage
basic number suffix

DIMENSIONS (mm), WEIGHT (kg)

TYPE 01 TYPE 02
Prefix “SC” Solenoid Prefix “SC” Solenoid
Epoxy moulded Epoxy moulded
IEC 335 / DIN 43650 IEC 335 / ISO 4400
IP65 IP65
NC (1/8): SCG256B001V/002V/003V/004V/013V/014V/015V/016V NC (1/4): SCG256B434VMS/436VMS/466VMS/470VMS/471V/472V
NO (1/8): SCG256B006V/018V

18
15
21

R=3 18 2 x Ø M3 2 x Ø M3
A A E R=3
A 35 35
B B
B E
C C C
3 M5

Availability, design and specifications are subject to change without notice. All rights reserved.
180°
180°

360° J 360° J 360°

G J
H G H G H

X X X
2 1 2 1 2 1
D 2,5 D K K
F 1 D F
NC NO
1 Except catalogue numbers: SCG256B471V/472V
NC (1/4): SCG256B402VMS/404VMS/414VMS/416VMS
prefix pipe
type A B C D E F G H J K X
A option size
E
B 1/8 60,5 27,5 16,5 33 22 25.5 46 53 69 15 18,6
01 SC
C 1/4 60,5 27,5 16,5 40 22 28,5 48 57 76 15 23,4
02 SC 1/4 76 38 23,3 40 29,7 28,5 48 57 78,5 15 23,4

18
180°

360° J prefix pipe weight (2)

type
H G option size brass stainless steel
00029GB-2018/R01

21 1/8 0,152 0,148

01 SC
X 1/4 0,180 0,177
2 1 02 SC 1/4 0,235 0,232
K R=3 2 x Ø M3 Incl. coil(s) and connector(s).
2)

D F

All leaflets are available on: www.asco.com

4 - Solenoid Valves (2/2)