Weather Station-Data Sheet-Sungrow PC4
Weather Station-Data Sheet-Sungrow PC4
PC-4-V11-UEN-Ver10-201803
1 System Introduction
The PC-4 environment monitoring device for PV plant is a portable,
user-friendly, and highly precise mobile system that can monitor multiple
meteorological elements. The device can collect information, such as
temperature, humidity, wind direction, wind speed, solar radiation, and air
pressure, display the information and perform tendency analysis.
The structure of the PC-4 environment monitoring device for PV plant is shown
in the following figure.
B A
E
D
Item Name
A Digital wind direction sensor
B Digital wind speed sensor
C* Radiation shield (temperature & humidity sensors and an air
pressure sensor have been installed inside)
D Solar radiation sensor
E Main control box
Note 1: If you purchase the temperature & humidity sensors and the air
pressure sensor, Sungrow will install the sensors inside the radiation shield
before delivery.
Note 2: According to the on-site configuration, the wind speed sensor and the
wind direction sensor can be divided into separated one and integrated one.
The separated sensors are taken as an example for brief description below.
Note 3: In this document, the description is given by using two solar radiation
sensors. However, you may install either one according to on-site requirement.
1
2 Main Technical Parameters
2.1 Digital Wind Speed Sensor
Threshold velocity ≤0.5 m/s
Sensor range 0-70 m/s
Resolution 0.1m/s
Accuracy ± (0.3+0.03V)m/s
2
2.4 Module Temperature Sensor (surface mounted)
Sensor range -40~80℃
Resolution 0.1℃
Accuracy ±0.1℃