Scribd
Upload
889 views1 page

MTS-86C 10102

The MTS-86C microcomputer trainer helps students understand the 8086 computer architecture and programming. It contains an 8086 CPU, memory, standard chip sets, input/output devices, and an external interface. Students can edit, assemble, download, debug and execute programs from the PC or system keypad to observe results instantly in the system memory. The trainer contains all the necessary experimental peripherals in a single unit to perform 8086 experiments without additional equipment.

Uploaded by

Tinsae Hailu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
889 views1 page

MTS-86C 10102

The MTS-86C microcomputer trainer helps students understand the 8086 computer architecture and programming. It contains an 8086 CPU, memory, standard chip sets, input/output devices, and an external interface. Students can edit, assemble, download, debug and execute programs from the PC or system keypad to observe results instantly in the system memory. The trainer contains all the necessary experimental peripherals in a single unit to perform 8086 experiments without additional equipment.

Uploaded by

Tinsae Hailu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Microcomputer Control Equipment

MTS-86C
8086 Microcomputer Trainer

MTS-86C helps students to understand the


architecture and programming of 8086 computer.
The system contains five main parts : (1) an 8086 CPU
(2) system and user memory (3) world standard chip
sets (4) input and output devices, and (5) External
interface.
Students edit and assemble program codes from
PC and observe instant results after they download
and execute programs from system memory. Debug
functions are also available via PC or system keypad
interface.

u Features
● Power supply and all experimental peripherals are built in a (4) Interrupt controller
single trainer to carry out 8086 experiments, no additional 8259
equipment is required. (5) Timer / counter controller
● Demo programs are permanently stored in system ROM 8253
to offer quick system test and functional demonstration. (6) Keyboard / display controller
● Programming codes are downloaded/debugged/executed 8279
via PC or Trainer keyboard (7) Serial port
● All chip sets are protected by an acrylic cover on the top of 8251 (RS-232C, 25pins, 2sets)
trainer panel. (8) Keyboard
● All chip names are clearly printed in corresponding position 24 Key
on acrylic panel 8. Experimental device
● External Interface allows user to create user-defined circuits. (1) A/D experiments contain
VR, photo TR, thermistor, MIC
u Specifications (2) D/A experiments contain (2W AMP, speaker)
(3) Speaker, MIC
1. CPU : 8086
(4) Thermistor sensor control function
2. Display unit : LCD (16 x 2 line)
(5) Photo sensor control function
3. Main RAM : 62256 x 2 (64KB)
(6) AMP, recorder
4. Monitor ROM : 27256 x 2 (64KB) (7) I/O simulation LED x 8, button switch x 8
5. User memory : 27256 x 2 or 62256 x 2 (8) FND control function
(64KB) (empty socket) 9. Switching p ower supply
6. Clock generator : 8284 AC in : 90~260V
7. I/O DC out : ±12V, +5V
(1) A/D converter 10. Battery back-up function
ADC 0809 (8 bit x 8 channel)
(2) D/A converter
u Accessories
1. Experiment manual 1 pce
DAC 0808 (8 bit x 1channel)
2. I/O board and cable 1 set
(3) I/O port 3. RS-232 cable 1 pce
8255 x 3 4. AC cord 1 pce

2 Microcomputer Control Equipment 10102

You might also like