Barrierta L55

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

Product information

BARRIERTA L 55 series
High-temperature long-term greases

Benefits for your application


– Higher machine availability and less need for maintenance
– at very high operating temperatures up to 260 °C
– under the influence of aggressive media and vapours
– where other lubricants might affect sensitive plastic components
– Tried and tested over many years in numerous industries and component types
– thanks to BARRIERTA base oils, which are made specifically to enable long-term stability
– backed by a large number of approvals and references for various applications
– four consistency classes to suit different applications

Description – conveyors (load and turn rollers)


– kiln cart wheel bearings
BARRIERTA is Europe's oldest high-quality brand of high-
temperature lubricants based on perfluorinated polyether oil – calender bearings
(PFPE). Today the name of BARRIERTA is widely regarded as – fan bearings
synonymous with long-term stability and thermal resistance.
– chain bearings in film stretching stenters
Specifically made raw materials and continued development have
made BARRIERTA products the first choice of lubrication experts BARRIERTA L 55/2 is most frequently used for initial and long-
in many sectors worldwide. term lubrication.
BARRIERTA L 55/0-3 series long-term greases offer excellent For relubrication softer grades of NLGI class 1 or lower are
resistance to high temperature and aggressive media and at the recommended.
same time compatibility with plastics and elastomers.
Friction points under the influence of media
BARRIERTA L 55/0-3 are NSF H1 registered and therefore
BARRIERTA L 55 greases offer exceptionally long service
comply with FDA 21 CFR § 178.3570. The lubricants were
lifetimes even when exposed to any of a large number of
developed for incidental contact with products and packaging
aggressive media such as concentrated acids, lyes, organic
materials in the food-processing, cosmetics, pharmaceutical or
solvents or gases.
animal feed industries. The use of BARRIERTA L 55/0-3 can
contribute to increase reliability of your production processes. We In addition to their resistance to media, BARRIERTA L 55/2 and
nevertheless recommend conducting an additional risk analysis, BARRIERTA L 55/3 offer also good adhesion and a sealing effect,
e.g. HACCP. which makes them suitable for application in
– valves, fittings and installations e.g. in the chemical industry
Application – pneumatic components
– level gauges, e.g. for fuels or chemicals
Rolling and plain bearings subject to high temperatures
– seals (static, dynamic)
One of the well-known strengths of the BARRIERTA L 55 series is
the products' suitability for the lubrication of bearings and guides – extraction systems
operating under extreme temperatures. A low evaporation rate Food-processing and pharmaceutical industries
enables longest grease lives and hence longest relubrication
intervals. All BARRIERTA L 55 greases are registered as NSF-H1 and are
therefore in compliance with FDA 21 CFR § 178.3570.
Typical applications include:
The additional certification according to ISO 21469 supports the
compliance with the hygienic requirements in your production

BARRIERTA L 55 series, Art-No. 090014, 090013, 090035, 090042, en


Edition 23.04.2012 [replaces edition 29.03.2012]
Product information

BARRIERTA L 55 series
High-temperature long-term greases

plant. You will find further information on ISO Standard 21469 on initial lubrication. Subsequently, the friction points should be dried
our website www.klueber.com. with clean dry compressed air or hot air to remove all solvent
residues.
White-coloured BARRIERTA L 55 special lubricants can therefore
also be used on friction points where occasional contact with The friction point must be free from oil, grease, perspiration and
food products cannot be ruled out for technical reasons, e.g. in contamination particles before initial lubrication.
rolling and plain bearings and guides operating under high
Please contact our technical sales staff for details of best
thermal loads in
practice with BARRIERTA L 55 lubricants to ensure longest
– automatic baking ovens lifetimes and highest performance outcomes are achieved.
– cooking or frying lines
– conveyor systems Minimum shelf life
Plastic-plastic friction points
The minimum shelf life is approx. 60 months from the date of
BARRIERTA L 55 greases – irrespective of NLGI grade - are manufacture if the product is stored in its unopened original
neutral towards the majority of plastic materials. Results of container in a dry, frost-free place.
pertinent tests with fluoroelastomers can be found overleaf.
We recommend testing lubricant compatibility with the materials Material safety data sheets
in question prior to series application.
Material safety data sheets can be downloaded or requested via
our website www.klueber.com. You may also obtain them
Application notes through your contact person at Kl ber Lubrication.
For optimum results we recommend cleaning all friction points
with white spirit 180/210 and then with Kl beralfa XZ 3-1 prior to

Pack sizes BARRIERTA L BARRIERTA L BARRIERTA L BARRIERTA L


55/0 55/1 55/2 55/3
Can 1 kg + + + +
Cartridge 800 g + + + +
Bucket 10 kg + + + +

BARRIERTA L 55 series, Art-No. 090014, 090013, 090035, 090042, en


Edition 23.04.2012 [replaces edition 29.03.2012]
Product data BARRIERTA L BARRIERTA L BARRIERTA L BARRIERTA L
55/0 55/1 55/2 55/3
Article number 090035 090042 090013 090014
NSF-H1 registration 129 523 129 561 129 400 129 562
Chemical composition, solid lubricant PTFE PTFE PTFE PTFE
Chemical composition, type of oil PFPE PFPE PFPE PFPE
Lower service temperature -40 °C / -40 °F -40 °C / -40 °F -40 °C / -40 °F -30 °C / -22 °F
Upper service temperature 260 °C / 500 °F 260 °C / 500 °F 260 °C / 500 °F 260 °C / 500 °F
Colour space white white white white
Density at 20 °C approx. 1.95 approx. 1.95 approx. 1.96 approx. 1.96
g/cm³ g/cm³ g/cm³ g/cm³
NLGI grade, DIN 51818 0 1 2 3
Shear viscosity at 25 °C, shear rate 300 s-1, approx. 6 000
equipment:rotational viscometer mPas
Shear viscosity at 25 °C, shear rate 300 s-1, 3 500 mPas 8 000 mPas 11 000 mPas
equipment: rotational viscometer, lower limit value
Shear viscosity at 25°C, shear rate 300 s-1, 5 500 mPas 12 000 mPas 17 000 mPas
equipment:rotational viscometer, upper limit value
Kinematic viscosity of the base oil, DIN 51562 pt. approx. 420 approx. 420 approx. 420 approx. 420
01/ASTM D-445/ASTM D 7042, 40 °C mm²/s mm²/s mm²/s mm²/s
Kinematic viscosity, DIN 51562 pt. 01/ASTM approx. 40 approx. 40 approx. 40 approx. 40
D-445/ASTM D 7042, 100 °C mm²/s mm²/s mm²/s mm²/s
Corrosion inhibiting properties of lubricating greases, <= 1 corrosion <= 1 corrosion <= 1 corrosion
DIN 51802, (SKF-EMCOR), test duration: 1 week, degree degree degree
distilled water
Four-ball tester, welding load, DIN 51350 pt. 04 >= 6 000 >= 7 000 >= 8 000 >= 8 000
Flow pressure of lubricating greases, DIN 51805, test <= 1 400 mbar
temperature: -30 °C
Flow pressure of lubricating greases, DIN 51805, test <= 1 400 mbar <= 1 600 mbar
temperature: -40 °C
Speed factor (n x dm) approx. 300 000 approx. 300 000 approx. 300 000 approx. 300 000
mm/min mm/min mm/min mm/min
Product information

BARRIERTA L 55 series
High-temperature long-term greases

Additional data: resistance to fluoroelastomers


Change 75 FKM 585 80 FKM 610 60 FVMQ 565
Exposure life [h] / exposure temp. [°C] 168 / 160 168 / 160 168 / 150
Volume [%] + 0.5 +0.5 - 0.3
Hardness (Shore A) + 0.5 -1 -2
Tensile strength [%] + 15 + 15 - 16
Elongation at tear [%] - 11 - 11 - 10

General recommendations for use: Static Dynamic


Change in volume [%] -5 to +15 - 2 to + 5
Change in hardness (Shore A) - 10 to + 10 - 5 to + 5

Klüber Lubrication München KG /


Geisenhausenerstraße 7 / 81379 München / Germany /
Klüber Lubrication – your global specialist phone +49 89 7876-0 / fax +49 89 7876-333.
The data in this document is based on our general experience and knowledge
Innovative tribological solutions are our passion. Through at the time of publication and is intended to give information of possible
personal contact and consultation, we help our customers applications to a reader with technical experience. It constitutes neither an
assurance of product properties nor does it release the user from the
to be successful worldwide, in all industries and markets. obligation of performing preliminary field tests with the product selected for a
With our ambitious technical concepts and experienced, specific application. All data are guide values which depend on the lubricant's
competent staff we have been fulfilling increasingly composition, the intended use and the application method. The technical
values of lubricants change depending on the mechanical, dynamical, chemical
demanding requirements by manufacturing efficient high- and thermal loads, time and pressure. These changes may affect the function
performance lubricants for more than 80 years. of a component. We recommend contacting us to discuss your specific
application. If possible we will be pleased to provide a sample for testing on
request. Kl ber products are continually improved. Therefore, Kl ber
Lubrication reserves the right to change all the technical data in this document
at any time without notice.
Publisher and Copyright: Kl ber Lubrication M nchen KG. Reprints, total or in
part, are permitted only prior consultation with Kl ber Lubrication M nchen KG
and if source is indicated and voucher copy is forwarded.

a company of the Freudenberg Group

You might also like