Domino PDF
Domino PDF
Domino PDF
PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950-0
Fax +49 (0)7309.951-0
[email protected]
www.peri.com
Important notes
All current safety regulations and guidelines must be observed in those countries where our
products are used.
The photos shown in this brochure feature construction sites in progress. For this reason, safety
and anchor details in particular cannot always be considered as conclusive or final. These are
subject to the risk assessment carried out by the contractor.
In addition, computer graphics are used which are to be understood as system representations.
For ensuring a better understanding, these and the detailed illustrations shown have been parti-
ally reduced to certain aspects. The safety installations which have possibly not been shown in
these detailed descriptions must nevertheless be available.
Safety instructions and load specifications are to be strictly observed at all times. Separate
structural calculations are required in case of changes and deviations.
The information contained herein is subject to technical changes in the interests of progress.
Errors and typographical mistakes reserved.
Content
DOMINO
2 The lightweight panel formwork for building
construction and civil engineering
Lightweight
4 Low dead weight and only 5 panel widths
Simple
7 One component for virtually all connections –
the Alignment Coupler DRS
Practical
8 Inset tie points and a comprehensive range of
accessories for fast working operations in all situations
12 DOMINO components
1
DOMINO
The lightweight panel formwork for
building construction and civil engineering
With the DOMINO panel formwork, All DOMINO system components can
PERI has a robust and lightweight easily be moved into position without
wall formwork in its programme the use of a crane. The lightweight
which is ideal for building construction formwork is ideally suited for forming:
and civil engineering projects.
■■ foundations
With the appropriate frame, corner and ■■ basement and storey-level walls
stopend panels as well as compensa- ■■ beams
tions, a wide range of applications can ■■ swimming and adventure pools
be realised in the system. ■■ rectangular piers and columns
■■ parapets and retaining walls
The supplementary scaffold bracket is ■■ supply shafts and small traffic tunnels
used to create safe working platforms. ■■ refurbishment projects
DOMINO frames are made of steel or
aluminium.
2
■■ Lightweight ■■ Simple ■■ Practical
Low dead weight, only 5 panel One component for virtually all Inset tie points and a comprehen-
widths, also available with connections – the Alignment sive range of accessories for fast
aluminum frames Coupler DRS working operations in all situations
Easy cleaning
The smooth surfaces and the closed
frame profile avoid concrete adhesion
to the greatest possible extent, and also
make it easier to clean the elements.
3
Lightweight
Low dead weight and
only 5 panel widths
4
Width
100 75 50 35 25 DM 75 DISE DGE DAW
Multi-Purpose Internal Articulated Outside
Panel Steel Corner Corner Corner Angle
250
5
6
Simple
One component for virtually all connections –
the Alignment Coupler DRS
The Alignment Coupler DRS on a standard panel joint ... ... and with timber compensations up to 10 cm thick.
Compensations up to 30 cm can be
realised using the Filler Support DPA.
The Compensation Waler DAR 80
transfers the anchor forces to the
adjacent panels.
7
Practical
Inset tie points and a comprehensive range of
accessories for fast working operations in all
situations
0,75 m
0,75 m
Inset tie points As a result, DOMINO is extremely
Thanks to the inset tie points, obstruc- suitable for forming foundations.
tions can be avoided without any pro- Due to the inset tie points, the panels
blems. Thus, anchors positioned close (125 cm, 150 cm) can be used in both
to the ground are easy to install. a vertical and horizontal position.
8
Foundation Tie Clamp and Top Tie
Bracket for strip foundations and
single footings
The DOMINO Foundation Tie Clamp for
easy shuttering of foundations, repla-
cing the bottom tie position as well as
saving work space and consequently
earthmoving operations. Ties are ten-
sioned accurately with a self-cleaning
hexagonal spindle.
Foundation Tie Clamp DLS Perforated Foundation Tie Top Tie Bracket DAH
9
DOMINO standard applications
Corners, T-junctions and fillers can easily be
realised within the system
Corners and T-junctions can be realised T-junctions can usually be formed with DRS for longer longitudinal compensa-
with DOMINO system components. one 75-sized panel and two Inside Steel tions in connection with Compensation
Here, too, the principle applies that Corners or alternatively by means of two Walers.
all site-relevant situations can be Articulated Corners. Together with the
accomplished using as few additional Wall Thickness Compensator, wall thick-
components as possible. nesses of 15 cm to 35 cm are possible
in 5 cm increments. Other intermediate
Two 50-sized panels, an Outside Corner dimensions that are not covered by the
Angle and a 90° Inside Steel Corner are DOMINO system can be accurately
all the elements that are required for shuttered with longitudinal compensa-
forming a right-angled corner. Angles tions.
from 75° to 165° can be realised using Tight, aligned and flush connections are
the articulated corner. guaranteed using the Alignment Coupler
50 50 50 50
DISE
DISE
DISE
DISE
50
50
50
50
DWD 5 DWD 5
DWD 10
DWD 5
2x DWD 5
20 24 30 35
25
25
25
75 75 75 75
10
75° -– 165°
On the external corners, 2 Alignment On the internal corners and standard With the articulated corners, angles
Couplers DRS are required per side for panel joints, 2 Alignment Couplers from 75° to 165° can be achieved.
heights of 2.50 m. DRS are required for heights of 2.50 m.
AT
MTF
AT
11
DOMINO Panel Formwork
Item no. Weight kg
066020 87.600 Panel D 250 x 100
Steel panel with 15 mm plywood.
530
1440
2500
530
1000 117
530
1440
2500
530
750 117
500 117
12
DOMINO Panel Formwork
Item no. Weight kg
125501 44.100 Panel D 250 x 35
Steel panel with 15 mm plywood.
530
1440
2500
530
350 117
530
1440
2500
530
250 117
1000 117
13
DOMINO Panel Formwork
Item no. Weight kg
066023 47.500 Panel DA 250 x 75
Alu panel with 15 mm plywood.
530
1440
2500
530
750 117
530
1440
2500
750
45 22 x 30 = 660 45
530
117
117
250
530
133
14
DOMINO Panel Formwork
Item no. Weight kg
066029 40.600 Articulated Corner DGE 250 Complete with
Alu panel with aluminium formlining. For oblique 2 pc. 066100 Positioning DEA 90°
angles from 75°, can be used internally and exter-
nally.
525
1440
2500
250 250 250
117
525
Wall Thickness Comp. DWD 250
066030 7.820 Wall Thickness Comp. DWD 250 x 5
101986 11.600 Wall Thickness Comp. DWD 250 x 10
For adjusting to wall thicknesses.
530
1440
2500
27 50 27 100
530
117
117
117
117
15
DOMINO Panel Formwork
Item no. Weight kg
066033 4.150 Filler Support DPA 250
For compensation with 21 mm filler plates.
2490
45
93
111603 148.000 Shaft Element DSE 275 Technical Data
Element for moving complete internal shaft Permissible load-bearing point capacity 2.0 t.
formwork.
2750
500
Accessories 117
111665 4.360 Spindle Shaft Element DSE
SW 24
66
230
150 248
16
DOMINO Panel Formwork
Item no. Weight kg
Stopend Panels DOMINO AT Note
101927 16.200 Stopend Panel DOMINO AT 250 x 3 Concrete cover approx. 30 or 50 mm.
108855 17.900 Stopend Panel DOMINO AT 250 x 5
External unit for stopend formwork.
2500
AT 250 x 3 AT 250 x 5
210 210
117
117
Stopend Panels DOMINO MTF 250 B
101928 27.100 Stopend Panel DOMINO MTF 250 x 20
118
101929 31.200 Stopend Panel DOMINO MTF 250 x 24/25
158
101930 36.000 Stopend Panel DOMINO MTF 250 x 30
218
101931 39.700 Stopend Panel DOMINO MTF 250 x 35/36
268
Center section with waterstop bar installation for
stopend formwork.
2500
B
120
1000 117
17
DOMINO Panel Formwork
Item no. Weight kg
124504 46.100 Panel D 150 x 75
Steel panel with 15 mm plywood.
40
240
1500
940
40 240
750 117
280
1500
500 940
280 117
350 117
250 117
18
DOMINO Panel Formwork
Item no. Weight kg
124538 51.300 Multi Panel DM 150 x 75 Complete with
Steel panel with 15 mm plywood. For oblique 46 pc. 030290 Plug Ø 20 mm
angles, wall connections etc.
280
750
1500
940
45 22 x 30 = 660 45
117
280
126286 40.800 Inside Steel Corner DISE 150
For 90° internal corners.
280
1500
117
250
133
280
117
280
117
117
19
DOMINO Panel Formwork
Item no. Weight kg
Wall Thickness Comp. DWD 150
125944 4.790 Wall Thickness Comp. DWD 150/5
125660 7.060 Wall Thickness Comp. DWD 150/10
For adjusting to wall thicknesses.
280
1500
940
27 50
117
280
124577 2.480 Filler Support DPA 150
For compensation with 21 mm filler plates.
1490
45
93
1000 117
750 117
20
DOMINO Panel Formwork
Item no. Weight kg
066043 28.600 Panel D 125 x 50
Steel panel with 15 mm plywood.
40
930
1250
280
500 117
40
930
1250
280
350 117
250 117
1000 117
21
DOMINO Panel Formwork
Item no. Weight kg
066051 24.800 Panel DA 125 x 75
Alu panel with 15 mm plywood.
40
930
1250
40 240
750 117
38
750
932
1250
45 22 x 30 = 660 45
117
280
117
250
133
280
117
280
22
DOMINO Panel Formwork
Item no. Weight kg
Wall Thickness Comp. DWD 125
066048 4.030 Wall Thickness Comp. DWD 125 x 5
101964 5.940 Wall Thickness Comp. DWD 125 x 10
For adjusting to wall thicknesses.
40
930
1250
27 50 27 100
117
117
280
066046 5.490 Outside Corner Angle DAW 125
For panel connections at 90° external corners.
1250
117
117
066053 2.070 Filler Support DPA 125
For compensation with 21mm filler plates.
1240
45
93
500
117
Accessories
111665 4.360 Spindle Shaft Element DSE
23
DOMINO Panel Formwork
Item no. Weight kg
Stopend Panels DOMINO AT 125 Note
101934 8.140 Stopend Panel DOMINO AT 125 x 3 Concrete cover approx. 30 or 50 mm.
108856 8.980 Stopend Panel DOMINO AT 125 x 5
External piece for stopend formwork.
AT 125 x 3 AT 125 x 5
1250
210 210
117
117
Stopend Panels DOMINO MTF 125 B
101935 14.600 Stopend Panel DOMINO MTF 125 x 20
118
101936 15.200 Stopend Panel DOMINO MTF 125 x 24/25
158
101937 17.500 Stopend Panel DOMINO MTF 125 x 30
218
101940 19.300 Stopend Panel DOMINO MTF 125 x 35/36
268
With waterstop bar installation support for
stopend formwork.
B
1250
120
250 117
350 117
500 117
24
DOMINO Panel Formwork
Item no. Weight kg
066061 26.500 Panel D 75 x 75
Steel panel with 15 mm plywood.
280 430 40
750
750 117
430 40
750
280
1000 117
750
45 22 x 30 = 660 45
432 38
750
117
280
126274 21.000 Inside Steel Corner DISE 75
For 90° internal corners.
40
117
750
250
133
280
117
750
25
DOMINO Panel Formwork
Item no. Weight kg
066068 2.520 Wall Thickness Compensation DWD 75 x 5
For adjusting to wall thicknesses.
27 50
430 40
750
117
280
066066 3.500 Outside Corner Angle DAW 75
For panel connections at 90° external corners.
117
750
117
066080 3.940 Alignment Coupler DRS
For all panel connections for DOMINO. Fillers up
to 12 cm.
max 173 61
128
288 259
109
790 60
40
112
165
40
26
DOMINO Panel Formwork
Item no. Weight kg
110406 2.100 Stopend Tie-2 DSA
For force application from the stopend formwork
into DOMINO panels. DW 15 thread.
95
DW 15
443
150
174
127010 8.700 Tension a. Compression Brace DOMINO 15-100 Complete with
1 pc. 115331 Bolt Ø 12 x 96, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
Note
Adjustable in 0.5-cm-increments from
15 to 100 cm.
Technical Data
Permissible tension 6.5 kN / Compression 1.0 kN.
139
Ø13,2
1350
Ø25
13
27
DOMINO Panel Formwork
Item no. Weight kg
066088 2.030 DOMINO Chamfer Strip DSD 250
For DOMINO Column Formwork and outside
corners.
2500
141
141
066086 1.110 Top Tie Bracket DAH Technical Data
For grid-independent anchoring outside of the Permissible anchor tensile force:
panel, especially for foundations. Hole 1 = 20 kN
Hole 2 = 10 kN
2
1
100
Ø20,5
100 88
120
120
308
M 12x40
40
28
DOMINO Panel Formwork
Item no. Weight kg
066097 1.560 Positioning DGE 135° external Complete with
For 135° external corners. 2 pc. 710224 Bolt ISO 4017 M12 x 40-8.8, galv.
470
M 12x40
40
111665 4.360 Spindle Shaft Element DSE Complete with
For use with internal Shaft Panel DSE. For spind- 2 pc. 105822 Bolt Ø 20 x 102, galv.
ling back to the starting position. 1 piece per Shaft 2 pc. 022230 Cotter Pin 5/1, galv.
Panel DSE.
SW 24
66
230
150 248
1044 45
653
Accessories
116292 4.730 Guardrail Post HSGP-2
213
146
142
Accessories
116292 4.730 Guardrail Post HSGP-2
29
DOMINO Panel Formwork
Item no. Weight kg
116292 4.730 Guardrail Post HSGP-2
As guardrail for different systems.
120
450
1050
1300
65 35
80
112
512
195
55
187 100
125
30
55
30
DOMINO Panel Formwork
Item no. Weight kg
066099 0.030 Stacking Aid DOMINO DSW
For stacking DOMINO panels. 4 panels per stack.
50
50
49
027680 49.600 Connector SB-1, 2 - MX/TR/D Technical Data
For assembly of Brace Frame SB-1, 2 to MAXIMO, Permissible load-bearing point capacity 1.0 t with
TRIO and DOMINO panels. crane sling angle ≤ 15°.
250 240
60
160
265
max 1650
120
1770
min 1270
650
490
Ø21
Accessories
027690 0.368 Bolt SB-TRIO/DOMINO, galv.
027590 2.400 Hook Strap for SB-1, 2
113255 0.414 Bolt SB-MAXIMO, galv.
114107 1.190 Sleeve SB-MAXIMO, galv.
114417 1.400 Sleeve SB-MAXIMO WDMX
120
125 130
Accessories
027690 0.368 Bolt SB-TRIO/DOMINO, galv.
113255 0.414 Bolt SB-MAXIMO, galv.
114107 1.190 Sleeve SB-MAXIMO, galv.
114417 1.400 Sleeve SB-MAXIMO WDMX
31
DOMINO Panel Formwork
Item no. Weight kg
027690 0.368 Bolt SB-TRIO/DOMINO, galv.
For panel formwork with 12 cm overall thickness.
165
125
Ø19
Accessories
114107 1.190 Sleeve SB-MAXIMO, galv.
114417 1.400 Sleeve SB-MAXIMO WDMX
152
SW 14
170
34
023020 0.676 Perforated Foundation Tie, 25 m Technical Data
For use with Foundation Tie Clamp TRIO, Permissible tension force 12.9 kN.
DOMINO, LIWA and HANDSET.
50
20
50 22
68
Ø16x42
120 98
Ø48,3
Ø21 Ø17
Ø 60,6
1178
9
32
DOMINO Panel Formwork
Item no. Weight kg
118238 12.200 Push-Pull Prop RS 260, galv. Note
Extension length l = 2.30 – 2.60 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.
Ø48,3
Ø17
Ø 60,6
Ø21
2178
9
117467 15.500 Push-Pull Prop RS 300, galv. Note
Extension length l = 1.90 – 3.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.
Ø48,3
Ø21 Ø17
Ø64,5
1773
9
117468 23.000 Push-Pull Prop RS 450, galv. Note
Extension length l = 2.80 – 4.50 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems and precast
concrete elements.
Ø48,3
Ø17
Ø 73
Ø21
2670
9
Ø48,3
Ø17
Ø 88,9
Ø21
4140
33
DOMINO Panel Formwork
Item no. Weight kg
028990 115.000 Push-Pull Prop RS 1000, galv. Note
Extension length l = 6.40 – 10.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.
Ø48,3 Ø17
Ø21 Ø21
Ø 102
10
103800 271.000 Push-Pull Prop RS 1400, galv. Note
Extension length l = 6.40 – 14.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems. Chain can be operated from bottom.
6290
10
Ø48,3 Ø48,3
Ø17
Ø21 Ø21
117343 3.250 Base Plate-2 for RS 210 – 1400, galv. Complete with
For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.
106
Ø21
52
261 64
Accessories
124777 0.210 Anchor Bolt PERI 14/20 x 130
34
DOMINO Panel Formwork
Item no. Weight kg
126666 3.070 Base Plate-3 for RS 210 - 1400 Complete with
For assembly of Push-Pull Props RS 210, 260, 2 pc. 105400 Pin Ø 20 x 140, galv.
300, 450, 650, 1000 and 1400. 2 pc. 018060 Cotter Pin 4/1, galv.
1 pc. 113063 Bolt ISO 4014 M12 x 80-8.8, galv.
1 pc. 113064 Hex Nut ISO7042-M12-8-G, galv.
105
Ø21
264 52
64
Accessories
124777 0.210 Anchor Bolt PERI 14/20 x 130
Ø70
Ø16,5
1915
10
113397 1.600 Spindle Handle RSS / AV
Spindle Handle for screwing on Push-Pull-Props
RSS I, RSS II, RSS III and Kickers AV 210 and AV
190 complete with 2 bolts and nuts M8.
179
196 130
Ø16,5 Ø16,5
2775
15
10
35
DOMINO Panel Formwork
Item no. Weight kg
028030 38.400 Push-Pull Prop RSS III Note
Extension length l = 4.60 – 6.00 m. Permissible load see PERI Design Tables.
For aligning PERI formwork systems.
Ø48,3
Ø82,5
Ø16,5 Ø16,5
4399
15
9
106000 1.820 Base Plate-2 for RSS, galv. Complete with
For assembly of RSS Push-Pull Props. 1 pc. 027170 Pin Ø 16 x 42, galv.
1 pc. 018060 Cotter Pin 4/1, galv.
Ø11
85
Ø21
12
150 100
Accessories
124777 0.210 Anchor Bolt PERI 14/20 x 130
Ø16,5 Ø16x42
390
690
10
10
36
DOMINO Panel Formwork
Item no. Weight kg
028110 5.180 Kicker AV 140 Complete with
Extension length l = 1.08 – 1.40 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.
Ø30
Ø 38
Ø16,5 Ø16x42
980
10
10
108135 12.900 Kicker AV 210 Complete with
Extension length l = 1.28 – 2.10 m. 1 pc. 027170 Pin Ø 16 x 42, galv.
For aligning PERI formwork systems. 1 pc. 018060 Cotter Pin 4/1, galv.
Note
Permissible load see PERI Design Tables.
Ø 70
Ø16x42 Ø16,5
1171
10
10
Ø16x42 Ø16,5
1915
10
10
SW 24
Ø14
130
37
38
39
PERI International
RU
CA
KZ
US AZ TM KR JP
TN LB
MA IL JO IR
KW
MX DZ EG QA HK
SA AE IN
OM
TH VN
PH
PA NG
CO MY
SG
ID
TZ
PE BR
AO MZ
NA
BW
CL
AU
ZA
AR
NZ
MX Mexico DZ
Algeria AZ
Azerbaijan LB
Lebanon
PERI Cimbras y Andamios, S.A. de C.V. S.A.R.L. PERI PERI Repesentative Office PERI Lebanon Sarl
www.peri.com.mx www.peri.dz www.peri.com.tr [email protected]
PA
Panama BW
Botswana HK
Hong Kong MY
Malaysia
PERI Panama Inc. PERI (Proprietary) Limited PERI (Hong Kong) Limited PERI Formwork Malaysia Sdn. Bhd.
www.peri.com.pa www.peri.co.bw www.perihk.com www.perimalaysia.com
US
USA EG
Egypt ID
Indonesia OM
Oman
PERI Formwork Systems, Inc. Egypt Branch Office PT Beton Perkasa Wijaksana PERI (L.L.C.)
www.peri-usa.com www.peri.com.eg www.betonperkasa.com www.perime.com
MA
Morocco IL
Israel PH
Philippines
PERI S.A. PERI F.E. Ltd. PERI-Asia Philippines, INC.
South America www.peri.ma www.peri.co.il www.peri.com.ph
AR
Argentina MZ
Mozambique IN
India QA
Qatar
PERI S.A. PERI (Pty.) Ltd. PERI (India) Pvt Ltd PERI Qatar LLC
www.peri.com.ar www.peri.co.mz www.peri.in www.peri.qa
BR
Brazil NA
Namibia IR
Iran SA Saudi Arabia
PERI Formas e Escoramentos Ltda. PERI (Pty.) Ltd. PERI Persa. Ltd. PERI Saudi Arabia Ltd.
www.peribrasil.com.br www.peri.na www.peri.ir www.peri.com.sa
CL
Chile NG
Nigeria JO
Jordan SG
Singapore
PERI Chile Ltda. PERI Nigeria Ltd. PERI GmbH – Jordan PERI Asia Pte Ltd
www.peri.cl www.peri.ng www.peri.com www.periasia.com
CO
Colombia TN
Tunisia JP
Japan TM
Turkmenistan
PERI S.A.S. PERI S.A.U. PERI Japan K.K. PERI Kalıp ve İskeleleri
www.peri.com.co www.peri.es www.perijapan.jp www.peri.com.tr
PE
Peru TZ
Tanzania KR
Korea TH
Thailand
PERI Peruana S.A.C. PERI Formwork and Scaffolding Ltd PERI (Korea) Ltd. Peri (Thailand) Co., Ltd.
www.peri.com.pe www.peritanzania.com www.perikorea.com www.peri.co.th
ZA South Africa KW
Kuwait VN
Vietnam
PERI Formwork Scaffolding (Pty) Ltd PERI Kuwait W.L.L. PERI ASIA PTE LTD
www.peri.co.za www.peri.com.kw www.peri.com.vn
40
IS
FI
NO
SE EE RU
LV
IR DK
LT
GB
BY
NL
PL
BE DE
LU
CZ UA
PERI GmbH SK
FR
Formwork Scaffolding Engineering CH AT
HU
Rudolf-Diesel-Strasse 19
SI
89264 Weissenhorn RO
IT
Germany
HR BA
Tel. +49 (0)7309.950-0 PT RS
ES
Fax +49 (0)7309.951-0 BG
[email protected]
www.peri.com
AL
GR TR
Oceania
AU
Australia DE
Germany IS
Iceland RU
Russia
PERI Australia Pty. Ltd. PERI GmbH Armar ehf. OOO PERI
www.periaus.com.au www.peri.de www.armar.is www.peri.ru
NZ
New Zealand DK
Denmark IT
Italy SE
Sweden
PERI Australia Pty. Limited PERI Danmark A/S PERI S.r.l. PERI Sverige AB
www.peri.co.nz www.peri.dk www.peri.it www.peri.se
EE
Estonia LT
Lithuania SI
Slovania
PERI AS PERI UAB PERI oplate i skele d.o.o
Europe www.peri.ee www.peri.lt www.peri.com.hr
AL
Albania ES
Spain LU
Luxembourg SK
Slovakia
PERI Kalıp ve İskeleleri PERI S.A.U. N.V. PERI S.A. PERI spol. s. r.o.
www.peri.com.tr www.peri.es www.peri.lu www.peri.sk
AT
Austria FI
Finland LV
Latvia TR
Turkey
PERI Ges.mbH PERI Suomi Ltd. Oy PERI SIA PERI Kalıp ve İskeleleri
www.peri.at www.perisuomi.fi www.peri-latvija.lv www.peri.com.tr
BE
Belgium GB
United Kingdom NO
Norway
N.V. PERI S.A. PERI Ltd. PERI Norge AS
www.peri.be www.peri.ltd.uk www.peri.no
BG
Bulgaria GR
Greece PL
Poland
PERI Bulgaria EOOD PERI Hellas Ltd. PERI Polska Sp. z o.o.
www.peri.bg www.perihellas.gr www.peri.com.pl
BY
Belorussia HR
Croatia PT
Portugal
IOOO PERI PERI oplate i skele d.o.o. Pericofragens Lda.
www.peri.by www.peri.com.hr www.peri.pt
CH
Switzerland HU
Hungary RO
Romania
PERI AG PERI Kft. PERI România SRL
www.peri.ch www.peri.hu www.peri.ro
CZ Czech Republic IR
Ireland RS
Serbia
PERI spol. S r.o. Siteserv Access & Formwork PERI oplate d.o.o.
www.peri.cz www.siteservaccess.ie www.peri.rs
41
The optimal System
for every Project and
every Requirement
PERI GmbH
Formwork Scaffolding Engineering
Rudolf-Diesel-Strasse 19
89264 Weissenhorn
Germany
Tel. +49 (0)7309.950 - 0
Fax +49 (0)7309.951- 0
[email protected]
www.peri.com