FLOWPRIME WB is a solvent free, two-component water based epoxy primer used for non-porous substrates prior to application of other Davco and Lanko products. It provides excellent adhesion and wetting of cementitious surfaces. The primer has a pot life of 25-30 minutes and cures initially in 2-3 hours and fully within 12 hours. It is applied by brush or roller in a thin film and must be used immediately after mixing the two components.
FLOWPRIME WB is a solvent free, two-component water based epoxy primer used for non-porous substrates prior to application of other Davco and Lanko products. It provides excellent adhesion and wetting of cementitious surfaces. The primer has a pot life of 25-30 minutes and cures initially in 2-3 hours and fully within 12 hours. It is applied by brush or roller in a thin film and must be used immediately after mixing the two components.
FLOWPRIME WB is a solvent free, two-component water based epoxy primer used for non-porous substrates prior to application of other Davco and Lanko products. It provides excellent adhesion and wetting of cementitious surfaces. The primer has a pot life of 25-30 minutes and cures initially in 2-3 hours and fully within 12 hours. It is applied by brush or roller in a thin film and must be used immediately after mixing the two components.
FLOWPRIME WB is a solvent free, two-component water based epoxy primer used for non-porous substrates prior to application of other Davco and Lanko products. It provides excellent adhesion and wetting of cementitious surfaces. The primer has a pot life of 25-30 minutes and cures initially in 2-3 hours and fully within 12 hours. It is applied by brush or roller in a thin film and must be used immediately after mixing the two components.
DESCRIPTION INSTRUCTIONS FLOWPRIME WB is a solvent free clear two-pack low Substrate preparation viscosity epoxy resin primer. It is used for non porous substrates prior to application Davco and Lanko • Substrate must be compliant with building products. regulations in force and at least 28 days old. • Substrate must be clean, sound, solid, dust-free and without any traces of oil, laitance, curing CHARACTERISTICS compound, cracks, plaster or paint and any other • Being water based, it gives excellent wetting of product which may affect bonding. cementitious surface. • Scrape, brush off or vacuum clean all traces of • Gives very good adhesion to the top coat. plaster, laitance, paint, non-bonded adhesive. • Solvent free. • Substrate bearing excessive traces of wax, grease • Can be applied on Concrete, Metal, Wood, etc. or paint must be stripped. • All substrate must be thoroughly dusted. USES • Suitable as primer prior to application of Davco and Lanko products Mixing • Pack components are pre-weighed for optimum SPECIFICATIONS performance. Never split packs. • Application : Brush or roller • Empty contents of component B into a mixing • Mixing Ratio : As supplied container and pre-mix to assure the suspension of solids. • Curing Time • Add component A and continue to mix to a uniform Initial : Approx. 2 - 3 hrs consistency for 1-2 minutes. Final : Approx. 12 hrs • Mix with slow speed drill and helical spinner head for Ready for use : Within 24 hrs 2 minutes. • Pot Life @ 250C : 25 - 30 mins
Specifications are subject to change without notification. Results Application
shown are typical but reflect test procedures used. Actual field • FLOWPRIME WB must be applied immediately performance will depend on installation methods and site conditions. after mixing the two components. • FLOWPRIME WB is applied with a paint brush or roller to produce a thin film. COVERAGE Approx. 0.15 - 0.25 kg/m2 depending on substrate porosity, texture and temperatures of substrate. PRECAUTIONS • Temperature range for use: 5°C to 30°C. PACKAGING 5 & 25kg container • Clean tools and equipments with water before the product dries. STORAGE Store in dry conditions between 5oC and 30oC, away from sources of heat and naked flames, in the original, DISCLAIMER unopened packs. The use of this product is beyond the manufacturer's control, and liability is restricted to the replacement of material proven faulty. The manufacturer is not responsible for any loss or damage arising from incorrect usage. All workmanship must be carried out in accordance with ParexGroup's specific SHELF LIFE instructions. Up to 12 months from the date of manufacture if stored The information contained herein is to the best of our knowledge true and accurate. No warranty is implied or given as to its completeness or accuracy in original unopened packing. in describing the performance or suitability of the product for a particular application. Users are asked to check that the literature in their possession is the latest issue.
