Scribd
Upload
1K views2 pages

Mid 128 Pid175

This document provides diagnostic information for a Volvo engine that is experiencing issues with its engine oil temperature sensor. It details 4 possible fault modes that could be occurring based on the sensor readings, including if the temperature is above 127C or 130C, or if the sensor voltage is below 0.12V or above 4.96V. For each fault mode, it lists the possible causes such as extreme running conditions or a defective sensor, and the recommended actions to take like checking the engine oil level or oil cooler.

Uploaded by

lampard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

Mid 128 Pid175

This document provides diagnostic information for a Volvo engine that is experiencing issues with its engine oil temperature sensor. It details 4 possible fault modes that could be occurring based on the sensor readings, including if the temperature is above 127C or 130C, or if the sensor voltage is below 0.12V or above 4.96V. For each fault mode, it lists the possible causes such as extreme running conditions or a defective sensor, and the recommended actions to take like checking the engine oil level or oil cooler.

Uploaded by

lampard
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Volvo Guided Diagnostics

Date: Information Type:


27-12-2011 Diagnostics Fault Codes 128: Engine ECU 175: Engine oil temperature
Profile:
EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB] EXC, EC210B LC (Volvo) [GB]
EXC, EC210B LC (Volvo) [GB]

MID128 Engine ECU;PID175 Engine oil temperature


Reference

Fault mode diagnosis

Fault mode Detection conditions:The engine control unit (E-ECU) registers: that the engine oil
FMI 0 temperature is above 127ºC (EA31)
Symptom: Possible causes:

 Extreme running conditions


 Clogged oil cooler
 Coolant system
 Defective sensor

Action Check engine oil level


Check if the oil filters are damaged or clogged.
Check engine oil cooler

Fault mode Detection conditions:The engine control unit (E-ECU) registers: that the engine oil
FMI 0 temperature is above 130ºC(EA31)
Symptom: Possible causes:

 Low power because of engine  Extreme running conditions


protection  Clogged oil cooler
 Coolant system
 Defective sensor

Action Check engine oil level


Check if the oil filters are damaged or clogged.
Check engine oil cooler

Fault mode Detection conditions:The engine control unit (E-ECU) registers: that the voltage is below
FMI 4 0.12 V(EA31)
Symptom: Possible causes:

 Short circuit to lower voltage


 Defective sensor

Action 3021 128 PID175

Fault mode Detection conditions:The engine control unit (E-ECU) registers: that the voltage is above
FMI 5 4.96 V (EA31)
Symptom: Possible causes:

 Short circuit to higher voltage


 Open circuit
 Defective sensor

Action 3021 128 PID175

Guided Diagnostics

You might also like