LBS SERIES

Single-stage bare shaft end-suction pumps

according to ISO 2858
50 Hz

ISO 9001 Company

Pumping Solution
 SINGLE-STAGE BARE SHAFT
LBS END-SUCTION PUMPS
INTRODUCTION VOLUTE CASING
The Lubi LBS series are single-stage bare shaft end-suction pumps The volute casing of the pumps are designed to be robust in
according to ISO 2858. Our range also includes several model of construction to take the undue stress offered by the pipe work. They
pumps which have been developed with duty condition which are not have an axial suction port and radial discharge port. Standard
covered in ISO 2858. flanges are PN 16 as per DIN standard EN 1092-2 and PN 25 as per
DIN standard EN 1092-2. ANSI 125 and ANSI 250 as per ASME
APPLICATIONS B16.1 are available on request. The volute casing are provided with
a priming and drain hole closed by plugs.
Water supply.
Pressure boosting for high rise buildings, hotels industry etc. MOTOR ADAPTOR & BACK COVER
Industrial washing & cleaning systems. Motor adaptors are robust in construction and are provided with an
Fire protection systems. air vent screw in the shaft seal chamber.
Cooling & Air Conditioning systems.
Boiler feed and condensate transfer system. SHAFT & BEARING BRACKET
Irrigation systems for fields including sprinkler & drip irrigation The bearing bracket is provided with 2 properly sized antifriction ball
systems. bearings which are permanently lubricated for life. The bearing
bracket is made of cast iron of high tensile strength. The shaft are
FEATURES AND BENEFITS available in carbon steel as well as stainless steel. A shaft sleeve of
stainless steel is provided in the stuffing box to protect the shaft from
 The pumps are non-self priming, horizontal, single-stage, end- wear and corrosion. All pumps are provided with one of four shaft,
suction pumps with axial suction port & radial discharge ports. shaft seal and bearing brackets. As shaft and bearings are strong
 Standard flanges for suction and discharge ports will be PN 16 as and properly sized the pump can be driven by a belt drive or diesel
per DIN standard EN 1092-2 and PN 25 as per DIN standard engine without any problem. A water thrower is provided on the shaft
EN 1092-2. ANSI 125 and ANSI 250 as per ASME B16.1 are to prevent liquid from entering the bearing bracket and damaging the
available on request. bearing.
 Performance and dimensions comply to ISO 2858.
 These pumps are long coupled pumps with TEFC squirrel cage COUPLING
induction motor with main dimensions complying to IEC All pumps can be provided with two types of couplings.
standards and mounting designation B3 (IM 1001).  Standard coupling
 These pumps are available with gland packing as well as  Spacer coupling
mechanical shaft seal. The use of spacer coupling is helpful since pumps fitted with them
 The pump impellers are dynamically balanced to grade 6.3 of ISO can be serviced without dismantling the motor from the base frame &
1940. also without removing the pipe work or volute casing. Realignment of
 These pumps and motors are available with fabricated steel base pump and motor is also not necessary after servicing.
frame according to EN 23661. IMPELLER
 These pumps are available with our standard range of motors
complying to EFF2 motors. They can also be supplied with EFF1 The impellers are closed impellers with extra smooth surface finish
motors on request. and machined completely from outside to ensure high efficiency.
 These pumps feature the back pull-out design. The user can They are dynamically balanced to grade 6.3 of ISO 1940. All
impellers can be trimmed to adopt them for the duty point requested
remove the motor, bearing bracket & impeller for servicing without by the customer. Suggested trimmed impeller diameter as shown on
disturbing the volute casing and the suction & delivery pipes. the performance curves in data booklet are theoretical. Performance
may vary from what is shown on the performance curve.
OPERATING CONDITIONS
Flow range : 3 to 1060 m³/h BASE FRAME
Head range : 4 to 158 metres Pump and motor are mounted on a common steel base frame in
Ambient temperature : Max. + 45°C for EFF2 motors, accordance with EN 23661.
Max. + 60°C for EFF1 motors.
Liquid temperature range : 0°C to +90°C (with Carbon/Ceramic/NBR/S.S.304 seal) TEST PRESSURE
0°C to +90°C (with Sic/Sic/Viton/S.S.316 seal) All impellers are hydrostatic tested for leakage as per the following
0°C to +140°C (with Carbon/Sic/Viton/S.S.316 seal) test pressure using water containing corrosion inhibitor at room
temperature.
MOTOR
PRESSURE RATING OPERATING PRESSURE TEST PRESSURE
Motor type : TEFC squirrel cage induction motor PN 16 16 bar 24 bar
Ratings : 0.37 to 132 kW PN 25 25 bar 37.5 bar
Rated speed : 2900, 1450, 960 rpm ANSI 125 125 psi 188 psi
Enclosure class : IP 55 ANSI 250 250 psi 375 psi
Insulation class : F
Nominal voltage : 3 phase 400 V MOTORS
(Tolerance +5% / -10%) The motors are squirrel cage induction motors, Totally Enclosed Fan
Supply frequency : 50 Hz Cooled with main dimensions to IEC standards.
Duty / Rating : S1 / Continuous
Direction of rotation : Clockwise as seen from the motor rear end The standard motors with the pumps are all as per EFF2 efficiency.
EFF1 efficiency motors can be available on request. Motors with
PUMPED LIQUIDS frame sizes 71 to 160 are with aluminum construction. The
remaining are cast iron construction.
LBS pumps are designed for non explosive liquids which are clean
and thin without any solid particles. For aggressive liquid please COUNTER FLANGES
ensure that material of construction is suitable for liquid to be
Cast iron pumps (version-A,B,C,D): For threaded connection,
pumped. flanges are made of cast iron. For welding connection, flanges are
made of carbon steel.
If liquids with a viscosity higher than that of water, are to be pumped
the power consumption of the pump will increase with increase in CF-8 & Bronze pumps (version-E,F): For threaded connection,
flanges are made of CF-8. For welding connection, flanges are made
viscosity. This will require a large motor for the pump. Head, of stainless steel AISI 304.
discharge and pump efficiency will reduce with increase in viscosity.
CF-8M pumps (version-G): For threaded connection, flanges are
When pumping liquids with a density higher than that of water, the made of CF-8M. For welding connection, flanges are made of
power consumption of the pump will increase at a ratio stainless steel AISI 316.
corresponding to increase in density. A set consist of one counter flange, one gasket of rubber material
and the requisite number of bolts and nuts.
 SINGLE-STAGE BARE SHAFT
LBS END-SUCTION PUMPS
SECTIONAL DRAWING & MATERIALS
10

03
16
17

12

02
09

10
07
08
05

01 14
04 13
15
10 06

11

POS. COMPONENT A-VERSION B-VERSION C-VERSION D-VERSION E-VERSION F-VERSION G-VERSION

1 Volute casing Cast iron Cast iron Cast iron Cast iron Bronze CF-8 CF-8M
2 Impeller Cast iron Bronze CF-8 CF-8M Bronze CF-8 CF-8M
3 Back cover Cast iron Cast iron Cast iron Cast iron Bronze CF-8 CF-8M
5 Shaft Carbon Steel S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 S.S. AISI 304 S.S. AISI 304 S.S. AISI 316
6 Shaft sleeve S.S. AISI 410 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 Bronze S.S. AISI 304 S.S. AISI 316
7 Impeller washer S.S. AISI 410 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 Bronze S.S. AISI 304 S.S. AISI 316
8 Impeller lock pin S.S. AISI 410 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316
9 Impeller key S.S. AISI 410 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316
10 Plugs Carbon Steel Carbon Steel Carbon Steel Carbon Steel Bronze S.S. AISI 304 S.S. AISI 316
11 O-ring NBR NBR NBR NBR Viton Viton Viton
12 Bearing bracket Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron
13 Foot Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel Carbon steel
14 Bearing cover Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron Cast iron
15 Water thrower NBR NBR NBR NBR NBR NBR NBR
16 Spacer S.S. AISI 410 S.S. AISI 410 S.S. AISI 304 S.S. AISI 316 S.S. AISI 304 S.S. AISI 304 S.S. AISI 316
17 Gland follower Cast iron Cast iron Cast iron Cast iron Bronze CF-8 CF-8M
4 Wear ring* Cast iron Bronze S.S. AISI 304 S.S. AISI 316 Bronze CF-8 CF-8M
Note: * Wear ring is available on request only.

PERFORMANCE RANGE
30 40 50 60 70 80 90 100 200 300 400 500 600 700 800 9001000 2000USgpm3000
200
LBS
2-Pole, 50 Hz
65-315
100 100-315
90 80-315
50-250
80 32-250
70 40-250 65-250 65-250L
100-250
60 40-250L 80-250 125-250
50 32-200 40-200
65-200
40 40-200H 32-200L 50-200
80-200
Hm

30 32-160 100-200
40-160 50-160
40-160H 65-160 65-160L
20 80-160
50-125
32-125 40-125
50-125L 65-125

10
9
8
7
6

5
100 200 300 Q 400 500 600 700 800 9001000 l / min 2000 3000 4000 5000 6000 7000 8000 9000 10000
2 3 4 5 6 7 8 9 10 20 l / sec 30 40 50 60 70 80 90 100 200

3
60 70 80 90 100 200 m /h 300 400 500 600 700
 SINGLE-STAGE BARE SHAFT
LBS END-SUCTION PUMPS
PERFORMANCE RANGE

30 40 50 60 70 80 90 100 USgpm 200 300 400 500 600 700 800 900 1000 2000
100
90
80
LBS
70 4-Pole, 50 Hz 125-500 150-500
60
50
80-400 100-400
40 125-400
150-400
30 65-315
80-315 100-315 125-315 150-315
20
50-250
32-250 65-250 65-250L
40-250
H 40-250L
80-250
100-250
125-250
m 150-250
32-200 40-200 65-200
10 32-200L 50-200
9 80-200
8 32-160 100-200
7 40-160 50-160
6 65-160 65-160L 80-160
5

4
32-125 50-125
40-125 50-125L 65-125
3

2
100 l/min 200 300 400 500 600 700 800 900 1000 2000 3000 4000 5000 6000 7000 8000900010000
Q
2 l/sec 3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100

60 70 m³/h 80 90 100 200 300 400 500 600

USgpm 200 300 400 500 600 700 800 900

50

40
LBS
6-Pole, 50 Hz 125-500
30

150-500
20 80-400 100-400 125-400 150-400
H
m 80-315
10 100-315 125-315
150-315
9
8 80-250
7
100-250
6 125-250
150-250
5 80-200
4

100-200
3

1
500 l/min 600 700 800 900 1000 2000 3000 4000 5000 6000 7000 8000
Q l/sec 10 20 30 40 50 60 70 80 90 100

30 m³/h 40 50 60 70 80 90 100 200 300 400

LUBI INDUSTRIES LLP

Near Kalyan Mills, Naroda Road, Ahmedabad-380 025, INDIA.
Phone : +91 - 79 - 30610100, Fax No. :+91 - 79 - 30610300.
Sales Enquiries: [email protected], [email protected]
www.lubipumps.com
Product Improvement is a continuous process at ‘LUBI’. The data given in this publication is therefore subject to revision.
04.00.270516.0045 Toll Free Service Hotline for India : 1800 3000 3055