Scribd Logo
Upload

Welcome to Scribd!

  • 37 views

    Ficha Tecnica ER-316L

    Uploaded by

    Oscar Zavaleta
    316L is a stainless steel alloy containing 0.02% carbon, providing excellent resistance to corrosion. It is used for welding types 316L, 318, and 319L that may be exposed to acids. The document provides typical gas metal arc welding and gas tungsten arc welding procedures and parameters for welding 316L, including wire sizes, voltages, amperages, shielding gas compositions and flow rates. It also lists the typical chemistry ranges and mechanical properties of 316L weld deposits according to AWS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ficha Tecnica ER-316L

    Uploaded by

    Oscar Zavaleta
    37 views1 page
    316L is a stainless steel alloy containing 0.02% carbon, providing excellent resistance to corrosion. It is used for welding types 316L, 318, and 319L that may be exposed to acids. The document provides typical gas metal arc welding and gas tungsten arc welding procedures and parameters for welding 316L, including wire sizes, voltages, amperages, shielding gas compositions and flow rates. It also lists the typical chemistry ranges and mechanical properties of 316L weld deposits according to AWS standards.

    Original Description:

    .

    Original Title

    Ficha tecnica ER-316L

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    316L is a stainless steel alloy containing 0.02% carbon, providing excellent resistance to corrosion. It is used for welding types 316L, 318, and 319L that may be exposed to acids. The document provides typical gas metal arc welding and gas tungsten arc welding procedures and parameters for welding 316L, including wire sizes, voltages, amperages, shielding gas compositions and flow rates. It also lists the typical chemistry ranges and mechanical properties of 316L weld deposits according to AWS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    37 views1 page

    Ficha Tecnica ER-316L

    Uploaded by

    Oscar Zavaleta
    316L is a stainless steel alloy containing 0.02% carbon, providing excellent resistance to corrosion. It is used for welding types 316L, 318, and 319L that may be exposed to acids. The document provides typical gas metal arc welding and gas tungsten arc welding procedures and parameters for welding 316L, including wire sizes, voltages, amperages, shielding gas compositions and flow rates. It also lists the typical chemistry ranges and mechanical properties of 316L weld deposits according to AWS standards.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Ficha Técnica

    ER 316L

    ALLOY DESCRIPTION AND APPLICATION;


    316L is similar to USA 316 but contains an average .02%
    carbon producing a weld deposit with excellent resistance against intergranular corrosion
    caused by carbide precipitation. USA 316L is used for welding AISI types 316L, 318, and
    319L that may be exposed to organic and inorganic acids. (Tri-mix gas =
    90%He+7.5%Ar+2.5%CO2)
    TYPICAL GMAW WELDING PROCEDURES; DCEP Short Circuit
    Wire Diameter Wire Speed (ipm) Amps Volts Electrical Stick-out Tri-mix (cfh)
    0.023 180-400 30-85 14-19 3/8-1/2” 20-25
    0.030 150-350 45-125 15-20 3/8-1/2” 20-25
    0.035 120-330 60-150 16-22 3/8-1/2” 20-30
    0.045 100-280 90-210 17-22 3/8-1/2” 25-30
    (1)
    Spray 0.030 280-600 160-220 24-28 3/8-1/2” 25-35
    (1)
    0.035 250-470 170-295 23-29 1/2-3/4” 25-35 (1) 98%Ar
    (1)
    0.045 200-385 195-360 24-30 1/2-3/4” 30-35 2%O 2
    (1)
    1/16” 110-200 210-380 25-31 1/2-3/4” 35-40
    TYPICAL GTAW WELDING PROCEDURES; DCEN with EWTh-2 truncated conical tip
    Filler Wire Size Tungsten Amps Volts Gas Cup Size Argon (cfh) Base thickness
    1/16” 1/16” 80-150 12 3/8” 20 1/16-1/8”
    3/32” 3/32” 150-250 12 3/8” 20 1/8- 3/16”
    1/8” 1/8” 200-375 12 1/2” 25 1/4-1/2”
    Procedures may vary with change in position, base metals, filler metals, equipment and other changes.

    TYPICAL WIRE CHEMISTRY RANGE (%) & WELD METAL PROPERTIES from AWS A5.4
    Carbon 0.03 max. Tensile Strength (psi) 70,000 min.
    Manganese 1.0-2.5 Elongation 30 % min.
    Silicon 0.30-0.65
    Molybdenum 2.0-3.0
    Nickel 11.0-14.0 Phosphorus 0.03 max.
    Chromium 18.0-20.0 Sulfur 0.03 max.
    Copper 0.75 max.
    AVAILABLE SIZES: TS 316L = Spools of 023, 030, 035, 045, 1/16, 3/32, 1/8, 3/16
    TT 316L = Cut lengths of 023, 030, 035, 045, 1/16, 5/64, 3/32, 1/8, 5/32, 3/16
    Other sizes available – please inquire
    SPECIFICATIONS; ANSI/AWS A5.9 ER316L
    ASME SFA 5.9 ER316L

    Empresas Carbone S.A. Calle 5ta Rio Abajo, edif. Empresas Carbone,
    Panamá, Sede Principal. Ciudad de Panamá, República de Panamá. www.empresascarbone.com
    Tel: (507) 391-6309

    You might also like