Scribd Logo
Upload

Welcome to Scribd!

  • 221 views

    B-1003 HDPE GDB50 PE4710 Natural Gas Distribution Pipe

    Uploaded by

    Zulfikar Noer

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd

    B-1003 HDPE GDB50 PE4710 Natural Gas Distribution Pipe

    Uploaded by

    Zulfikar Noer
    221 views2 pages

    Original Title

    B-1003 HDPE GDB50 PE4710 Natural Gas Distribution Pipe(1)

    Copyright

    © Attribution Non-Commercial (BY-NC)

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    221 views2 pages

    B-1003 HDPE GDB50 PE4710 Natural Gas Distribution Pipe

    Uploaded by

    Zulfikar Noer

    Copyright:

    Attribution Non-Commercial (BY-NC)
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    PolyPipe® GDB50 PE3408/PE4710 Gas Pipe

    High Density Polyethylene for natural gas distribution.

    Typical Printline: 4” IPS SDR 7 – POLYPIPE® GDB50 GAS – PE3408/PE4710 – CDE – ASTM D2513 – MANUFACTURING CODE

    TYPICAL PHYSICAL PROPERTIES


    *NOMINALVALUES
    PROPERTY ASTM
    TEST METHOD Bi-Modal Uni-Modal
    PE4710 PE4710
    Density, Natural D1505 0.949 gm/cc 0.949 gm/cc
    Density, Black D1505 0.960 gm/cc 0.960 gm/cc
    Melt Index (190°C/2.16 kg) D1238 0.08 gm/10 min. 0.08 gm/10 min.
    Flow Rate (190°C/21.6 kg) D1238 7.5 gm/10 min. 7.5 gm/10 min.
    Tensile Strength @ Yield D638 3,600 psi 3,600 psi
    Ultimate Elongation D638 >800% >800%
    Flexural Modulus – 2% Secant D790 150,000 psi 150,000 psi
    Resistance to Rapid Crack Propagation, Full ISO 13478 >665 psi ---
    Scale Pc @ 0oC
    Resistance to Rapid Crack Propagation, S-4 Pc ISO 13477 >174 psi ---
    @ 0 oC
    Resistance to Rapid Crack Propagation, S-4 Tc ISO 13477 <2oF ---
    @ 10 bar
    PENT F1473 >5,000 hrs. >500 hrs.
    Hardness, Shore D D2240 64 64
    Izod Impact Strength (Notched) D256 8 ft-lbf/in 8 ft-lbf/in
    Vicat Softening Temperature D1525 255°F 255°F
    15 15
    Volume Resistivity D991 >10 ohm-cm >10 ohm-cm
    Thermal Expansion Coefficient D696 1.0 x 10-4 in/in/°F 1.0 x 10-4 in/in/°F
    CELL CLASSIFICATION D3350 445574C 445474C
    MATERIAL CLASSIFICATION D1248 Type III, Class C, Category 5
    PPI HYDROSTATIC DESIGN BASIS (HDB) D2837 1,600 psi @ 73.4°F 1,600 psi @ 73.4°F
    (as listed in PPI TR-4) 1,000 psi @ 140°F 800 psi @ 140°F
    *Nominal values are intended to be guides only, and not as specification limit.
    *Some of the data listed above was determined from compression molded test specimens; therefore may deviate from pipe specimens.

    PolyPipe, Inc.
    2406 N. I-35 | P.O. Box 390 | Gainesville, TX 76241
    Phone 940.665.1721 | 800.433.5632 | Facsimile 940.668.8612
    Sales Facsimile 940.668.2704 | www.polypipeinc.com

    B-1003
    11/09
    PolyPipe® GDB50 PE3408/PE4710
    Gas Pipe Data and Pressure Ratings – CTS & IPS

    Design Dimensions
    Pressure
    Nominal Pipe Standard Weight,
    DR Rating* for Min. Wall
    Size Average OD, Length, ft lbs/ft
    Natural Gas, Thickness,
    psig @ 73°F inches
    inches
    CTS
    ½” 100 0.625 0.090 1,000 0.066
    1” 100 1.125 0.090 500 0.128

    IPS
    ½” 9.3 100 0.840 0.090 500 0.093
    ¾” 11 100 1.050 0.095 500 0.126
    1” 11 100 1.315 0.120 500 0.197
    1 ¼” 10 100 1.650 0.165 500 0.341
    1 ¼” 11 100 1.650 0.150 500 0.314
    1 ½” 11 100 1.900 0.173 500 0.411
    2” 11 100 2.375 0.216 250 0.642
    2” 11 100 2.375 0.216 500 0.642
    2” 11 100 2.375 0.216 1,500 0.642
    3” 11 100 3.500 0.318 500 1.395
    3” 11 100 3.500 0.318 40 1.395
    4” 11 100 4.500 0.409 40 2.306
    6” 11 100 6.625 0.602 40 4.997
    8” 11 100 8.625 0.784 40 8.470
    10” 11 100 10.750 0.977 40 13.157
    12” 11 100 12.750 1.159 40 18.508

    ∗ Ratings are in accordance with DOT CFR 49, Part 192, §192.121 and §192.123.
    ∗ Effective July 14, 2004, the maximum design pressure was amended to 125 psig (reference §192.123a) when
    designed in accordance with §192.121 for nominal pipe sizes up through 12”IPS (§192.123e.3).

    Notes: ¾ All products are manufactured in accordance with ASTM D2513.


    ¾ Product is available with yellow stripes for service identification. Call for availability.
    ¾ Some sizes are special order. Call for availability on sizes or DR’s not shown.
    ¾ The above weights are calculated per PPI TR-7, using a density of 0.960.

    PolyPipe, Inc.
    2406 N. I-35 | P.O. Box 390 | Gainesville, TX 76241
    Phone 940.665.1721 | 800.433.5632 | Facsimile 940.668.8612
    Sales Facsimile 940.668.2704 | www.polypipeinc.com
    B-1003
    11/09

    You might also like