XXXXX

Lbl
LDEB
RNC
RKL

XXXXX
RNC
Exit
catch data in flash memory
neghbor check
All neighbor relations (GSM; Utrancell, femto, and if it's 850 or 1900, etc) for a whole site
All utran cell relations for a cell
All GSM relations for a cell
External GSM Cell Detail
intra_freq neighbor list
inter_freq neighbor list
To Check HO Attempt
to check PSC
to check CPICH power
to Change CPICH power
to check current user and RSSI
to get ROP Wise KPI
HO attampt with other cells.

Total RRC Connect

CS RRC
CS RAB
PS RAB
Drop Count
Drop Bucket
Rab Failed UL
Rab Failed DL
Rab Failed UL HW
Rab Failed DL HW
Power Blocking Bucket
UL RSSI
Lack DL Power
Fast return to 4G
Fast return to 4G
To Check CSFB Rab
To Check CSFB RRC
To Check Eutran Freq Relation
Neighbor Attempt
Inter Frequency HO Attempt
Inter Frequency HO Attempt
To Check Downtime
To check Channel Status
To Check DRD value
To change DRD Threshold
Alarm Check RNC
Check Individual Off set
Change Individual Off set
Admission Parameters
minPwrRl
minPwrMax
usedFreqThresh2dRscp
usedFreqThresh2decno
sRatSearch
sIntersearch & sIntrasearch
qRxLevMin
qQualMin
maximumtransmissionPower (compare to site level maxDlPowerCapability)
Administrative State
Cellreserved State
Operational State
RSSI Levels
Handover Type
Number of releases in last hour
Current Accessibility & Retainability Rates
RRC Connection Success/Fail Rates

NodeB Login
Exit
catch data in flash memory
Alarm Log History
license and feature
VSWR Check
Sync status
Nodeb Features
License
To Check Channel Status
Propagation Delay

HS limiting
RSSI
SCTP Packet Loss ratio
Current Alarm on site

Current Alarms with details

Log of alarms since 25 Jan 16
Log of events since Feb 20, 2011
Log of events since Feb 20, 2011
Log of changes since Feb 20, 2011 (Note: only gives what the current setting is, not the prior setting)
RSSI Levels
HS Throughput
Status of all plug in units
xxx = plug in unit proxy number
Current State of T1s (Locked/Enabled)
Current T1s Issues (Es, Ses, Uas)
15 minute T1 errored seconds data over last 24 hours
15 minute T1 Unavailable seconds data over last 24 hours
State of IMA links
State of RAX Boards
Number of current active radio links
maxDlPowerCapability (compare to maxtransmissionpower)
maxDlPowerCapability
Cable Attenuation
Get VSWR
IP or ATM backhaul
Get currrent on TMAs
shows TMA settings broke out per sector
shows TMA settings only if on/off (no parms listed)
Shows each sector and if TMA internal power is on
Gets port info and shows what is in cabinet
Connects to specific port - Used to see config stats of a specific port. Ex: TMA current and status
Sector antenna, Auxplugin unit "x' comes from st plug command list can use plugin values too
Loads board groups
Lists out all board goups
xxx = board group name - Dispalys details of each board group
Value of 0 implies no Antenna Supervision.
Shows max DL power capability
*shows the licensed capacity for Channel Elements in the Uplink
shows the available Channel Elements in the Uplink based on the available RAX boards
*confirm the RAX boards on the site
*Shows equipment type
prints configuration version on the node
*Shows antennaSupervisionThreshold
Shows which sector is reserving which RAX slots
Shows RSSI at cell level - displays both branches
Shows both UL and DL atten
Shows the UL attenuation values
Shows # of channel elements available
Shows # of A-DCH Reservation
Shows DL attenuation
Shows UL gain value
Shows filter unit ulAtten
Antenna supervision parms for branches
Shows BBPool2, BBPool1 HS/EUL resource allocation (Use with cabx)
check the aal2 config on the RBS
Shows BB Pools and all boards. RUIF=12 and OBIF=13 all after 13 are BBP2, all before 12 are BBP1
Check for RAX board Restart
Check for TX board Restart
CHECK Error on NODEB
CHECK Fault on NODEB
CHECK Failure on NODEB
Fail - fault etcRestart
000800 equates to the bo command slot #
TMA current limits
freq band hi and low edge
shows low current supervision
Shows electrical delay values
Shows current low limt
Shows current hi limt
pmx utrancell=PU2068 pmRedirectAttemptsEutra -m 1

locationref

[‎2/‎19/‎2020 6:37 PM] Nitesh Agarwal A:

pmx utrancell=KOL134 celldowntimeauto|pmNoSystemRabReleaseSpeech -m 2
lst KOLP06

To check FRTL BELOW 3 Commands

pmx utrancell=PU2068 pmRedirectAttemptsEutra -m 1
lget PUN909 cellReselectionPriority
lget PU2068 redirectionOrder
Lget Siteid EutranFreqRelation

lget utranrelation utrancellref

KOL126|KOL125|KOLP91|KOLP52|KOLP50|KOL137|SROL01|KOLP95
Cell PSC Target Neighbor
MBRMLPX 232 NHARTL3
RNC Level Commands
XXXXX XXXXX
amos amos RKLP102
Quit Quit;
lt all lt all
lget lget utrancell=MBRMLP utrancellref
lpr lpr MBRMLP
lpr lpr utrancell=MBRMLPX UtranRelation
lpr lpr utrancell=MBRMLPX GsmRelation
lget lget ExternalGsmCell=MBRMLP NCC|BCC|BCCH|LAC
lget lget utrancell=MBRMLPX UtranRelation frequencyRelationType 0
lget lget utrancell=MBRMLPX UtranRelation frequencyRelationType 1
pmx pmx utrancell=MBRMLPX pmRlAddAttemptsBestCellSpeech|p
get utrancell=MBRMLP primaryscramblingcode
lget utrancell=MBRMLP primaryCpichpower
lset utrancell=MBRMLP primaryCpichpower 320
cedr -c MBRMLPX
pmxh utrancell=MBRMLPX LackDlPwr -m 4
pmxh utrancell=AIRTALY pmRlAddAttemptsBestCellSpeech|pmRlAddSucce
pmxh utrancell=MBRMLPX pmNoRrcCsReqDeniedAdm -m 4
pmxh utrancell=MBRMLPX pmNoNormalRabReleaseSpeech
pmx utrancell=MBRMLPX pmnosys -m 4
pmx utrancell=MBRMLPX pmTotNoRrcConnect -m 4
pmxh utrancell=MBRMLPX PmTotNoRrcConnectReqCs|pmTot
pmxh utrancell=MBRMLPX pmNoRabEstablishAttemptSpeech
pmxh utrancell=MBRMLPX pmNoRabEstablishAttemptSpeech
pmxh utrancell=MBRMLPX Rabreleasespeech -m 4
pmxh utrancell=MBRMLPX pmnosysRelSpeechNeighbr|pmno
pmxh utrancell=MBRMLPX pmNoFailedRabEstAttemptLackUl
pmxh utrancell=MBRMLPX pmNoFailedRabEstAttemptLackDl
pmxh utrancell=MBRMLPX pmNoFailedRabEstAttemptLackUl
pmxh utrancell=MBRMLPX pmNoFailedRabEstAttemptLackDl
pmxh utrancell=MBRMLPX pmNoRrcReqDeniedAdmDlPwr|
pmxh utrancell=MBRMLPX pmSamplesUlRssi|pmSumUlRssi -
pmxh utrancell=MBRMLPX LackDlPwr -m 4
lget utrancell=MBRMLP rwr
lget utrancell=MBRMLP redirect
pmx utrancell=MBRMLPX pmNoRabEstSuccCsfbDetect|PmNoR
pmx utrancell=MBRMLPX pmTotNoRrcConnReqCsfbIndSucc|
lget utrancell=MBRMLP primaryCpichpower
pmxh utrancell=MBRMLPX pmRlAddAttemptsBestCellSpeech|
pmxh utrancell=MBRMLPX pmAttNonBlindInterFreqHoCsSpee
pmxh utrancell=MBRMLPX pmNoTimesIfhoRlAddToActSet
pmx utrancell=MBRMLPX celldowntime -m 2
lst MBRMLPX
lget utrancell=MBRMLP gsmthresh
lset utrancell=MBRMLP gsmthresh 50
altk
 lget utrancell=MBRMLP individualoffset
lset utrancell=MBRMLP individualoffset 20
lget utrancell=MBRMLP adm
lget utrancell=MBRMLP minPwrRl
lget utrancell=MBRMLP minPwrMax
lget utrancell=MBRMLP usedFreqThresh2dRscp
lget utrancell=MBRMLP usedFreqThresh2decno
lget utrancell=MBRMLP sRatSearch
lget utrancell=MBRMLP sIntersearch
lget utrancell=MBRMLP qRxLevMin
lget utrancell=MBRMLP qQualMin
lget utrancell=MBRMLP maximumtransmissionPower
lget utrancell=MBRMLP adminis

Nodeb Level Commands

amos amos MBRMLP
Quit Quit;
lt all lt all
lga lga
invh invh
lh ru fui get vswr
get sync ava
get . features
get . license
st rru
pmx pmx . Propagationdelay
pmr
15
3
38
alt alt
cabax cabax
lst lst
ala ala
lgar lgar -s 20160125
to check LAC in RNC

To check Downtime with Drops

To check Fach/RACH DISABLE

To See the attampt as 3G to 4G is happened

EutranFreqRelation should be define for 3G to 4G Reselection (Only freq is define, 3G User blindly go to 4G freq

to check all Neighbor list in RNC

 Site ID Site mo
6485 MBRMLPCurrent value
Required Value Remark
XXXXX XXXXX XXXXX XXXXX XXXXX
Password (rnc)

power check get . configuredmax

NCC|BCC|BCCH|LAC Call Attempt and succpmx W2ANAO reqcs
yRelationType 0
yRelationType 1
pmRlAddAttemptsBestCellSpeech|pmRlAddSuccessBestCellSpeech

350 320

LackDlPwr
ellSpeech|pmRlAddSuccessBestCellSpeech -m 4 -a
pmNoRrcCsReqDeniedAdm
pmNoNormalRabReleaseSpeech|pmNoSystemRabReleaseSpeech|pmNoRrcCsReqDeniedAdm|pmNoReqDeniedAdm
pmnosys
pmTotNoRrcConnect
PmTotNoRrcConnectReqCs|pmTotNoRrcConnectReqPs
pmNoRabEstablishAttemptSpeech|pmNoRabEstablishSuccessSpeech
pmNoRabEstablishAttemptSpeech|pmNoRabEstablishSuccessSpeech
Rabreleasespeech
pmnosysRelSpeechNeighbr|pmnosysRelSpeechSoho|pmnosysRelSpeechULSynch|pmnoOfTermSpeechCong|pmNoSystem
pmNoFailedRabEstAttemptLackUl
pmNoFailedRabEstAttemptLackDl
pmNoFailedRabEstAttemptLackUlHw
pmNoFailedRabEstAttemptLackDlHw
pmNoRrcReqDeniedAdmDlPwr|pmNoRrcReqDeniedAdmDlChnlCode|pmNoRrcReqDeniedAdmUlHw|pmNoRrcReqDenied
pmSamplesUlRssi|pmSumUlRssi
LackDlPwr
rwr
redirect
pmNoRabEstSuccCsfbDetect|PmNoRabEstSuccCsfbInd|pmNoRabEstAttCsfbInd|pmNoRabEstAttCsfbDetect
pmTotNoRrcConnReqCsfbIndSucc|pmTotNoRrcConnReqCsfbInd|pmNoLoadSharingRrcConnCsfbInd
eutran
pmRlAddAttemptsBestCellSpeech|pmRlAddSuccessBestCellSpeech -m 4 -a
pmAttNonBlindInterFreqHoCsSpeech12|pmFailNonBlindInterFreqHoFailRevertCsSpeech12
pmNoTimesIfhoRlAddToActSet
celldowntime

25 50 Change threshold depend upon traffic and 2G utilization.

0 20

get utrancell=CNU2603 cellreserve

get utrancell=CNU2603 operationalstate
pmr -r 20 | grep -i sitename
get utrancell=CNU2603 hoType
pmxh utrancell=CNU2603 pmNosysRelSpeech|pmnoofterm -m 2 s -a
pmr -m 2 -r 9 |grep CNU6393
pmr -m 2 -r 8 |grep CNU6393

Password (rbs)

ala
20160125
lge -s 20110220
lgsavemo -s 20110701
lgo -s 20110220
pmr (then Option 1)
pmr (then Option 6)
st plug
get xxx
st t1
pget t1
pmx . pmes -m 24 -aal
pmx . pmuas -m 24 -aal
st ima
st rax
get radio no
get RbsLocalCell maxDlPowerCapability
get . Maxdl
get cable atten
lh ru fui get vswr
get . userplane
lh ru fui get devstat
get .tma
get . tma
get . internalpower
cabx
lhsh 001200/port_x_dev_y fui get devstat
lpr SectorAntenna=x,AuxPlugInUnit=x
lh asc asc vswr
bp
bp xxx
get antennabranch supervision
get cell maxDlPowerCapability
get . license
get nodebfunction ava
cab
get 0
cvls
get antennabranch antennaSupervisionThreshold
lget rax reservedby
RSSI
get . atten
get . ulatten
get nodebfunction available
get . maxnumadch
get . dlatten
get . ulgain
get RfCable=FU1_._RX_B1 ulattenuation
get ant super
lget txdevice resources
stv
bo
lhsh 000800 llog
lhsh 001000 llog
ter | grep -i error
ter | grep -i Fault
ter | grep -i Failure
lhsh 000800 ter | egrep -i fail
lhsh 000800 ter | egrep -i error
or to see errors on whole RBS
lh all ter | egrep -i error
 lhsh 000800 ter | egrep -i fail
or combine egrep -i '(error|fail)'
get tma curr
get . Fqband
get . Currentsuper
get cable delay
get . Currentlo
get . Currenthi
3G to 4g attempt

y go to 4G freq
dm|pmNoReqDeniedAdm

TermSpeechCong|pmNoSystemRabReleaseSpeech

AdmUlHw|pmNoRrcReqDeniedAdmDlHw|pmNoFailedAfterAdm

stAttCsfbDetect
mnoofterm -m 2 s -a
Command
St fdd
alt
ue print –admitted
pmr -r 106 -m 2 | grep -i put 
st mme
get session
get . transmissionmode
get . Pdcchcfimode
get . dlchannelbandwidth
get . ulchannelbandwidth
get . nooftxantennas
St mme
get proxyid
invl
get . maximumTransmissionPower
get . crsgain
get . pdschtypebgain
get . pZeroNominalPucch
get . pZeroNominalPusch
get . dlMaxRetxThreshold
get . tinactivitytimer
get . Schedulingalgorithm
get . subframeAssignment
get . framestartoffset
get . Qcienabled
ue print -bearer -allcell
get . cellreselectionpriority
get . connected
lga
pmr -r 204 -m 2 | grep -i SctpPacketLossRati
2 times login in baseband site
To change EUTRAN Frequency on a cell
st cell
acl 1350
cvms
pmr
pr relations
lh ru fui get vswr
ue print -admitted
get . Licensestatechannelbandwidth
pmxh . pmRadioUeRepCqiDistr
pmr -r 106 -m 3 | grep -i interference
NOTE : For BB site, please use 206 in pmr command and for RBS sites use 106
Throughput
pmr -r 106 -m 2 | grep -i put
st termpointtoenb
get . Mixedmode
get . Finger
get . Antenna
lga
hi
pgetsn . Countername
st rru
cabx
pmxh . pmPrbUtilDl

grep "filterTimeGpsAlarm" *.log> filterTime

mobatch nw_19apr_oss3_4.txt 'lt all;rbs;rbs
egrep '2017' *.log>2017alarm.xls
 Description KPI
Status of cell ALL KPIS
Alrms ALL KPIS
Number of ue admitted on real time ALL KPIS
To check real time thpt Integrity checks
to check if site is alive in the defined mme/or to check IP ALL KPIS
or session continuity either to WCDMA or LTE ALL KPIS
To get TM mode at enode B Integrity checks
PDCCH CFI MODE Integrity checks
Dl channel BW -5 Mhz for FDD Integrity checks
Ul channel BW -5 Mhz for FDD Integrity checks
for fdd it should be 2, tDD -4 Integrity checks
to get proxy , to check S1 definition all kpis
mme ips all kpis
to check feture states all kpis
Should be 460 Integrity checks
to check CRS gain Integrity checks
to check Pb gain Integrity checks
to check initial ue power for open loop Integrity checks
to check initial ue power for open loop Integrity checks
to check retx threshold for data & signalling bearee, should be 16 Integrity checks
inactivity timer should be 10 ms Integrity checks
should be proportional fair medium Integrity checks
SA assignment shouldbe 2 for all tdd external relations Integrity checks
Should be 0 for all sectors Integrity checks
to check which QCI are enabled in enode B Integrity checks

For FDD idle mode

for dedicated mode
Alarm History
SctpPacketLossRatio
password

shows proxy ID
1350 is a proxy ID
To make CV executable after parameter change
to check all parameter
Nbr relations
VSWR Check
No. of users admitted
License for channel bandwidth
To Check CQI Distribution
UL RSSI
06 in pmr command and for RBS sites use 106
UL RSSI
pmr -r 106 -m 3 | grep -i interference 107
Termpoint status 114
To check mixedMode
To see license loaded on a site
TO check MIMO
To check history of alarms
To check last fired commands on eNB
Counter Status
check rru
VSWR Check

Grep
MO Batch command
Grep command on cygwin
Command for Baseband sites :
Command to check whether site is active and taking traffic
pmr -r 206 -m 4 | grep -i InitialERabEstabSuccRate
pmr -r 206 -m 4 | grep -i RandomAccessDecodingRate
pmr -r 206 -m 4 | grep -i RrcConnSetupRatioForMOData
pmr -r 206 -m 4 | grep -i RrcConnSetupRatioForMOSignalling
pmr -r 206 -m 4 | grep -i RrcConnSetupSuccRate
Throughput :pmr -r 206 -m 2 | grep -i put

Command for RBS sites :

pmr -r 106 -m 4 | grep -i InitialERabEstabSuccRate Command to check whether site is active and taking traffi
pmr -r 106 -m 4 | grep -i RandomAccessDecodingRate
pmr -r 106 -m 4 | grep -i RrcConnSetupRatioForMOData
pmr -r 106 -m 4 | grep -i RrcConnSetupRatioForMOSignalling
pmr -r 106 -m 4 | grep -i RrcConnSetupSuccRate
Throughput :pmr -r 106 -m 2 | grep -i put

-60, -80.-90, -100.. -105 they are bad,,,, and -110,115,-118,-119 they a RSSI

mcc Transport=1,Router=LTEUP ping 10.155.68.249 -c 10 -s 1472

mcc Transport=1,Router=LTEUP ping 10.206.17.1 -c 10 -s 1472
mcc Transport=1,Router=LTEUP ping 10.206.17.12 -c 10 -s 1472
mcc Transport=1,Router=LTEUP ping 10.206.31.2 -c 10 -s 1472
mcc Transport=1,Router=LTEUP ping 10.0.232.5 -c 10 -s 1472
mcc Transport=1,Router=LTEUP ping 10.206.16.79 -c 10 -s 1472
mcc Transport=1,Router=LTEUP ping 10.50.96.5 -c 10 -s 1472

S1
pmr -r 205 -m 6 | grep -i S1SigEstabSuccRate

get . Cfimode
get . csfallback

pmx . pmrrcconnmax -m 48
pmx . Pmpdcpvoldldrb$ -m 5
ping -s 10.230.112.83 for loss in IP(SLOW PING)
te is active and taking traffic
 BSC Cell TG BCCH
DLBSC29 S2192O3 143 502
BSC Login eaw
Exit exit
Site Status rlstp
To Halt a sector rlstc
to Active a Sector rlstc
To get TG Value rxtcp
Check TG status rxmsp
rxmop
TRX and TS status rxcdp
Alarm Status rxasp
rxmfp
rxmfp
Frequency Plan rldep
rlcfp
rlcfe
ICM Status rlcrp
rldec
Neighbor list check Neighbor list check rlnrp
rlnrp
rlnrp
Power Status rlcpp
rlcpc
Layer Threshhold rllhp
rllhc
HSN MAIO rlchp
DIP Error rldep
dtqup
dtqup
dtstp
dtstp
SD Check rlccp
rlccc
Site reset rxbli
rxble
rxese
rxesi
To Block a Trx rxbli
rxble
LOL Setting rlllp
rlllc
MCCCH Increase rlccp
rlccc
rlccc
AMR Check rldhp
rldhc
SD Increase rlcfp
rlccc
FPDCH check rldhc
rlsbp
rlsbc
rlbdp
rlbdc
Fast Return To 3G rlrwp
2G to 3G reselectio to check UMFI rlump
Add UMFI rlumc
rlume
For changing the TA value rlldc
To get IMSI details hgsdp
 Target Neighbor Site ID
NHARTL3 9599
eaw DLBSC29 391 491 492
exit;
rlstp:cell=S2192O3;
rlstc:cell=S2192O3,state=Halted;
rlstc:cell=S2192O3,state=Active;
rxtcp:moty=rxotg,cell=S2192O3;
rxmsp:mo=rxotg-143,subord;
rxmop:mo=rxotg-143-0&&-11;
rxcdp:mo=rxotg-143;
rxasp:mo=rxotg-143;
rxmfp:mo=rxocf-143;
rxmfp:mo=rxotrx-143-0;
rldep:cell=S2192O3;
rlcfp:cell=S2192O3;
rlcfe:cell=S2192O3,dchno=19,chgr=3;
rlcrp:cell=S2192O3;
rldec:cell=S2192O3,bcchno=1;
rlnrp:cell=S2192O3,cellr=all,nodata;
rlnrp:cell=S2192O3,cellr=NHARTL3;
rlnrp:cell=S2192O3,cellr=NHARTL3,single;
rlcpp:cell=S2192O3;
rlcpc:cell=S2192O3,BSPWRB=33,BSPWRT=33; For IBS we keep it 33 and for macro it would be 43, 45,47 d
rllhp:cell=S2192O3;
rllhc:cell=S2192O3,layer=1,layerthr=65;
rlchp:cell=S2192O3;
rldep:cell=S2192O3;
dtqup:dip=9599d2;
dtqup:dip=9599rbs2;
dtstp:dip=9599d2;
dtstp:dip=9599rbs2;
rlccp:cell=S2192O3;
rlccc:cell=S2192O3,chgr=0,sdcch=3,tn=1&&3;
rxbli:mo=rxotg-143-0,subord,force;
rxble:mo=rxotg-143-0,subord;
rxese:mo=rxotg-143-0,subord;
rxesi:mo=rxotg-143-0,subord;
rxbli:mo=rxotrx-143-2,subord,force;
rxble:mo=rxotrx-143-2,subord;
rlllp:cell=S2192O3;
rlllc:cell=S2192O3,scldsc=ul,scldlul=20,scldlol=30;
rlccp:cell=S2192O3;
rlccc:cell=S2192O3,ccch=2,chgr=0;
rlccc:cell=S2192O3,ccch=3,chgr=0,tn=1&3&4&6&7;
rldhp:cell=S2192O3;
rldhc:cell=S2192O3,dthamr=30;
rlcfp:cell=S2192O3;
rlccc:cell=S2192O3,sdcch=2.chgr=1,tn=1&&2;
rlgsp:cell=S2192O3;
rlsbp:cell=S2192O3;
rlsbc:cell=S2192O3,CP=YES;
rlbdp:cell=S2192O3;
rlbdc:cell=S2192O3NUMREQEGPRSBPC=5,chgr=1;
rlrwp:cell=S2192O3;
rlump:cell=S2192O3;
rlumc:cell=S2192O3,add,umfi=10807-255-nodiv; 255 PSC which need to add
rlume:cell=S2192O3,del,umfi=10807-255-nodiv; 131 PSC which need to add
rlldc:cell=S2192O3,Maxta=8;
hgsdp:MSISDN=919818983225; 9818983225
hgsdp:MSISDN=918130292873; 8130292873
hgsdp:MSISDN=917503117956; 7503117956
hgsdp:MSISDN=91;
hgsdp:MSISDN=91;
hgsdp:MSISDN=91;
o it would be 43, 45,47 depend upon required and BTS Type.
h need to add
h need to add
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.206.31.2 -c 10 -s 1472
y
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.50.97.5 -c 10 -s 1472
y
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.206.17.1 -c 10 -s 1472
y
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.206.17.12 -c 10 -s 1472
y
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.50.96.5 -c 10 -s 1472
y
mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_C_UP,AddressIPv4=TN_C_UP ping 10.0.232.5 -c 10 -s 1472
y
.2 -c 10 -s 1472

5 -c 10 -s 1472

.1 -c 10 -s 1472

.12 -c 10 -s 1472

5 -c 10 -s 1472

5 -c 10 -s 1472
Ping to SGW & mme
SCTP Retransmission
S1 SR

Sync Issue
MME Disable/Locked
EthernetPort Status 100 or 1G
SCTP retrans pmr ---- 305

pmr -r 205 -m 24 | egrep -i

Acc_S1SigEstabSuccRate
S1 failure

Sync St sync

MME status St mme

ethernet port status and speed For BBU

lpr ethernetport

EnodeB LAN port thpt pmr ----- 302

For DUW
get gigabit
For BBU
To ping towards SGW

mcc Transport=1,Router=LTEUP,InterfaceIPv4=TN_A_UP,AddressIPv4=TN_A_UP ping 10.206.31.2 -c 10 -s 1472

To ping Towards MME

mcc Transport=1,Router=LTECP,InterfaceIPv4=TN_A_CP,AddressIPv4=TN_A_CP ping 10.0.231.30 -c 10 -s 1472

For DUS
To ping towards SGW
lhsh 000200 EtHostMo_startPing -d 10.206.31.2 -h 1 -c 5 -s 1472

To ping Towards MME

lhsh 000200 EtHostMo_startPing -d 10.206.17.39 -h 2 -c 10 -s 1472
 MME IP Node Name
10.206.17.53/32 MME-2
10.206.17.39/32 HAR MME
10.0.231.30/32 Manesar MME 3
10.206.33.234/32 Noida MME 2

SGW IP SGW Node name

10.206.17.1 MAN-SPG02
10.206.17.12 MAN-SPG03
10.50.96.5 Noida-SPG04
10.0.232.5 MAN-SPG05
10.50.97.5 Noida-SPG06
10.206.31.2 MAN-SPG04