Scribd
Upload
43 views4 pages

Load Calulation

The document provides design parameters and load calculations for a structural analysis model. It includes calculations for dead loads, live loads, wind loads, and gantry loads based on given structural dimensions and specifications.

Uploaded by

sanjoybapi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
43 views4 pages

Load Calulation

The document provides design parameters and load calculations for a structural analysis model. It includes calculations for dead loads, live loads, wind loads, and gantry loads based on given structural dimensions and specifications.

Uploaded by

sanjoybapi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

DESIGN PARAMETERS :

Primary load cases for staad pro models:


Dead Load Calculation:-
Assuming AC sheeting load = 200N/ m*m =.2Kn/m*m
Here 1.56m Purlin interval
So load on intermediate purlin = .2X1.56 = 3.12 kN/m
End purlin load = 3.12/2 = 1.56 kN/m
Side Sheeting load on columns
Assuming Sheeting load = .2kN/m*m
Self weight of runner for purlin =.450 kN/m*m

Total load = .2 + .45 = .65 kN/m*m

Load per column:


One end column = 6.6/2 =3.3X.650= 2.145 kN/m*m
Other end column = 5.6/2 = 2.80X 0.650= 1.80 kN/m
One end side setting column =12.2/2 +3.3
=9.4 X .650 =6.1 kN/ m*m
Other end side setting column =5.6/2 +12.2/2 = 8.9X.650= 5.785
kN/m
Intermediate column = 12.2X .650 = 7.93 kN/m*m

Gable Sheeting Load:


14.5/2 X 0.650 = 4.7125kN/m*m for end
14.5 X .650 = 9.425 kN/m*m for intermediate column of side gable
Live Load :=
For intermediate purlin
We assumed .725 kN/m*m
So intermediate purlin load = .725X1.56 = 1.131kN/m

Wind load calculation:-


Industrial Shed Wind load calculation;
For roof
As per IS 875 part 3
Vb= basic wind speed of Howrah as per IS 875 part 3
= 50m/s
Wind load F on a roof truss by static wind method and given by:
F= ( Cpe –Cpi) X AX Pd
Where Cpe&Cpi are force co-efficient for exterior and interior of the
structure.
Assuming the permeability of the structure (opening) between ( 5- 20
%) of the wall area.
Cpi=(+-).5, (+-).2
External press are coefficient for say tooth roofs Multi span structure
F= ( Cpe –Cpi)
Pd= K1 k2 K3 Vb
K1= Risk co-efficient =1.08 ( Asper IS 875 part 3 Important building
Table 1)
K2 = Terrain height, structure size factor
K3 = Topoghraphy factor
K2 = terrain category 4 Class of structure C
K2 = 1.03 ( As per IS 875 part 3 Table 2)
K3 = 1
Vz = K1 K2 K3 Vb
= 1.08X 1.03X1.0X50
= 55.62 m/s
Pd = 0.6Vz*Vz
= .6x55.62X55.62 = 1856.15N/m*m
Wind from wind ward (-Z) = 1856.15 N/m*m
F = (Cpe-Cpi)XAXPd
= (.6+.5)XAX1.86
=2.046 A ( 7.41, 3.70)
Wind from Leeward = (-.7-.5) XAX1.86 = -2.232 A ( -3.48, -1.84)

Wind from (+Z)


Wind ward = ( -.5-.5) X A X 1.86
= -1.86 A ( -2.90, -1.45)
Lee ward = ( -.6 -.5)XAX1.86
= - 2.046A (- 7.36, -3.68)
Wind from (-X, +X)
(-.8- .5) AX1.86 = -2.418 A (-3.77, -1.88)
Here
H = 15 m
B = 29 m
L = 97 m
So H/B = 15/29 = .51
L/B = 97/29 = 3.34
Case 1:
Table 4 IS 875 part 3
(+Z) , (- Z)
Gable Side ( Front)
(.7 + .5) X AX 1.86
= 2.232 A ( 32.364, 16.182)
Opposite Gable Side (Rear)
= (-.1-.5)X AX 1.86
= -1.116A ( -16.182,-8.09)
Side face
(-0.5-0.5)xAx1.80
= -1.8A (-22.692, -5.208)
Side face
(0.7+0.5)xAx1.80
=2.32 A (27.5, 6.25)
Opposite (far) side
(-0.25-0.5)xAx1.8
= -1.395A
= -3.908(1st column)
= -12.415(2nd column)
= -17.019(intermediate column)
= -4.6075(far side)
Gable side
(-0.6-0.5)xAx1.80
=-0.246A (-29.667, -14.833)
Gantry load calculation:-

Crane capacity= 40T


Assumed value of wheel base= 4m C/C
Self weight of crane girder excluding trolley= 40T
Self weight of crab or trolley= 10T
Impact 25% due to moment
Maximum moment due to surge= 5T

Load on single wheel due to self weight= 10T


Load on single wheel due to crane with trolley load= 20T
Self weight of crab on single wheel= 5T
Total load on single wheel= 35T
With impact load on single wheel= 1.25x35= 44T

You might also like