EN - Genetec Mercury EP1502 Intelligent Controller
EN - Genetec Mercury EP1502 Intelligent Controller
EN - Genetec Mercury EP1502 Intelligent Controller
OSDPv2 supported
Available Interfaces
Synergis Cloud Link
Readers: 2 Reader Ports
Synergis Cloud Link is an intelligent and PoE-enabled gateway
appliance that supports a mix of non-proprietary access control Inputs:
modules like the Mercury Security EP1501 Intelligent Controller. • 8 general purpose: programmable circuit type
• Two dedicated: tamper and power monitor
Modernize your access control environment by deploying
Synergis Cloud Link over your network and establish real-time Outputs: 4 relays: Form C, 5A 30 Vdc
connectivity to your doors.
HARDWARE SPEC SHEET Mercury Security EP1502 Intelligent Controller
Specifications Table
Dimensions 6.0 in × 8.0 in × 1.0 in Certifications UL 294 (US) Recognized, CE Compliant,
(152 mm × 203 mm × 25 mm) ROHS | FCC Part 15 Class A, NIST Certified
Operating 0-70°C operational, -55-85°C storage Encryption. ULC-S319 (See Synergis Cloud Link
Temperature Hardware Installation Guide), EN-60839-11-1
Architecture Connected to the Synergis Cloud Link appliance over IP, the multi-port EP1502 is an IP-ready intelligent
▶
controller for managing up to 64 readers. 1 reader port can be used for an additional 2 readers (1 door)
representing access control for up to 64 readers.
Genetec Inc.
T 514.332.4000 © Genetec Inc., 2017. Genetec, Synergis, the Genetec Logo, and the Synergis Logo are
trademarks of Genetec Inc., and may be registered or pending registration in several
genetec.com jurisdictions. Other trademarks used in this document may be trademarks of the
[email protected] manufacturers or vendors of the respective products.