PCB relays Catalog 1308028

Single relays Issued 01-05

Power relay K-B and K-D

Powertrain Chassis Safety Security Body Driver Convenience

Systems Systems Information

Description
Features
- Double make contact with
high maximum switching
voltage
- Extremely high reliability as a
twin contact

Typical applications
- 24 V loads (double make
contact)
- Actuating drives Car Industry
- Also available for 42 V
applications

Please contact Tyco Electronics

for relay application support.
Truck
Industry

Other
Industry
1 double make contact 1 double make contact on armature 33C_3d01/33D_3d01

Design Conditions
Open All parametric, environmental and
endurance tests are performed
Weight according to EIA Standard RS-407-A
Approx. 0.7 oz. (20 g) at standard test conditions unless
otherwise noted:
Nominal voltage 23 °C ambient temperature,
12 V or 24 V; 20-50% RH, 29.5 ± 1.0" Hg
other nominal voltages available on (998.9 ±33.9 hPa).
request Please also refer to the Application
Recommendations in this catalog
Terminals
for general precautions.
PCB terminals,
for assembling in printed circuit
boards

Disclaimer
All technical performance data apply to the relay as such, specific conditions of the individual application are not considered. Please always check the suitability of
the relay for your intended purpose. We do not assume any responsibility or liability for not complying herewith. We recommend to complete our questionnaire and
to request our technical service. Any responsibility for the application of the product remains with the customer only. All specifications are subject to change without
notification. All rights of Tyco are reserved.
78
Please observe the disclaimer.
 PCB relays Catalog 1308028
Single relays Issued 01-05

Power relay K-B and K-D

Dimensional drawing
Power relay K-B

.709 ±.039
(18 ±1) 1.063 ±.039
(27 ±1)

.709 ±.020
(18 ±0.5)

ECR2194-C

.138 ±.020 *) .098 – .118

(3 ±0.5) (2.5 – 3.0)

Terminals tinned
*) additional tin tops
max .059 inch (1.5 mm)

Power relay K-D

ECR2195-K

Mounting holes
View of the terminals (Bottom view)
.715 ±.002
(18.15 ±0.05)
.492 ±.002
(12.5 ±0.05)
.287 ±.002
(7.3 ±0.05)
.124 ±.002
(3.15 ±0.05)
.108 ±.002
(2.75 ±0.05) .039 +.002
(1 +0.05)
.213 .472 ±.002
(5.4) .079 Ø .091 +.004 (12 ±0.05)
(2) (2.3 +0.1)

.268 +.004
(6.8 +0.1)
Ø .083 +.004 .561 ±.002
(2.1 +0.1)
Ø .083 +.004 (14.25 ±0.05)
(2.1 +0.1)

Ø .091 +.004 Ø .091 +.004

(2.3 +0.1) (2.3 +0.1)
.476 ±.002 .035 +.002
.433 ±.002 (0.9 +0.05)
(12.1 ±0.05)
(11 ±0.05)

.124 ±.004 ECR0584-J

(3.15 ±0.1)

79
Please observe the disclaimer.
 PCB relays Catalog 1308028
Single relays Issued 01-05

Power relay K-B and K-D

Contact data
Power relay K-B K-D
Contact configuration Double make contact/ Double make contact on armature/
Form X Form U
Circuit symbol
(see also Pin assignment)

Rated voltage 12 V 24 V 12 V
Rated current at 85 °C 20 A 2 x 15 A
Contact material AgNi0.15
Max. switching voltage/power See load limit curve
Max. switching current1)
On2) 80 A 40 A 2 x 40 A
Off 50 A 30 A 2 x 20 A
Minimum recommended switching current3) 1 A at 5 V
Voltage drop at 10 A (initial) Typ. 40 mV, 600 mV max. Typ. 2 x 20 mV, 2 x 300 mV max.
Mechanical endurance (without load) > 106 operations
Electrical endurance > 1 x 105 operations > 1 x 105 operations > 2 x 105 operations
(example of resistive load) at 13.5 V / 50 A at 27.5 V / 30 A at 13.5 V / 50 A

1) The values apply to a resistive or inductive load with suitable spark suppression and at maximum 13.5 V for 12 V or 27 V for 24 V load voltages.
2) For a load current duration of maximum 3 s for a make/break ratio of 1:10.
3) See chapter Diagnostics in our Application Recommendations on page 18.

Load limit curve

Load limit curve 2 ^

= safe shutdown,
no stationary arc

Pin assignment
1 double make contact/ 1 double make contact on armature/
1 form X 1 form U

80
Please observe the disclaimer.
 PCB relays Catalog 1308028
Single relays Issued 01-05

Power relay K-B and K-D

Coil data
Available for nominal voltages 12, 24 V
Nominal power consumption of the unsuppressed coil at nominal voltage 2.25 W
Test voltage winding/contact 500 VACrms
Maximum ambient temperature range – 40 to + 85 °C
Operate time at nominal voltage Typ. 4 ms
Release time at nominal voltage1) Typ. 3 ms
1) For unsuppressed relay coil

N.B.
A low resistive suppression device in parallel to the relay coil increases the release time and reduces
the lifetime caused by increased erosion and/or higher risk of contact tack welding.

Operating voltage range

Does not take into account

the temperature rise due to
the contact current
E = pre-energization

Operating conditions
Temperature range, storage -40 °C to 155 °C
Test Relevant standard Testing as per Dimension Comments
Vibration resistance IEC 68-2-6 (sine pulse form)10 … 200 Hz
acceleration, according to position 5 … 40 g No change in the
Shock resistance IEC 68-2-27 (half-sine pulse form) 8 ms switching state > 10 µs
acceleration 30 g
Solderability IEC 68-2-20 Ta, Method 1 Aging 3 (4 h/155 °C)
Dewetting
Resistance to soldering heat IEC 68-2-20 Tb, Method 1A 10 s ± 1 s with shielding

81
Please observe the disclaimer.
 PCB relays Catalog 1308028
Single relays Issued 01-05

Power relay K-B and K-D

Ordering information

Part numbers
(see table below for coil data) Contact Contact Enclosure Terminals
Relay part number Tyco order number arrangement material
V23033-C1054-B132 0-1393275-3 Form X ( double make ) AgNi0.15 Open Printed circuit
V23033-C1055-B132 0-1393275-4 Form X ( double make ) AgNi0.15 Open Printed circuit
V23033-D1054-B132 0-1393275-6 Form U ( double make AgNi0.15 Open Printed circuit
on armature )
V23033-D1055-B132 0-1393275-8 Form U ( double make AgNi0.15 Open Printed circuit
on armature )

Coil versions
Coil data Rated coil Coil resistance Must Must Allowable overdrive 1)
for Power voltage +/- 10% operate voltage release voltage voltage (V)
K-B / K-D (V) (Ω) (V) (V) at 23 °C at 85 °C
V23033-**054-**** 12 64 6.9 1.2 16.8 13.3
V23033-**055-**** 24 234 14.1 2.4 32.2 25.6
1) Allowable overdrive is stated with no load applied and minimum coil resistance.

Standard delivery packs (orders in multiples of delivery pack)

K-B / K-D: 400 pieces

82
Please observe the disclaimer.