C C CCCCC

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

Based ON Nature Of Duties:

Step up or primary Electrical Power substation:


Primary substations are associated with the power generating plants where the voltage is stepped
up from low voltage (3.3, 6.6, 11, 33kV) to 220kV or 400kV for transmitting the power so that
huge amount of power can be transmitted over a large distance to load centers.
Primary Grid Electrical Power Substation:
Such substations are located at suitable load centers along with the primary transmission lines.
At primary Grid Power Substations the primary transmission voltage (220kV or 400kV) is
stepped down to secondary transmission voltages (110kV) . This Secondary transmission lines
are carried over to Secondary Power Substations situated at the load centers where the voltage is
further stepped down to Sub transmission Voltage or Primary Distribution Voltages (11kV or
33kV).
 Step Down or Distribution Electrical Power Substations:
Such Power Substations are located at the load centers. Here the Sub transmission Voltages of
Distribution Voltages (11kV or 33kV) are stepped down to Secondary Distribution Voltages
(400kV or 230kV). From these Substations power will be fed to the consumers to their terminals.

Basis Of Service Rendered:

Transformer Substation:
Transformers are installed on such Substations to transform the power from one voltage level to
other voltage level.
Switching Substation:

Switching substations are meant for switching operation of power lines without transforming the
voltages. At these Substations different connections are made between various transmission
lines. Different Switching Schemes are employed depends on the application to transmit the
power in more reliable manner in a network.

Converting Substation:

Such Substations are located where AC to DC conversion is required. In HVDC transmission


Converting Substations are employed on both sides of HVDC link for converting AC to DC and
again converting back from DC to AC. Converting Power Substations are also employed where
frequency is to be converted from higher to lower and lower to higher. This type of frequency
conversion is required in connecting to Grid Systems.
Based on Operation Voltage:

High Voltage Electrical Power Substation:

This type of Substation associated with operating voltages between 11kV and 66kV.

Extra High Voltage Electrical Power Substation:

This type of Substation is associated where the operating voltage is between 132kV and 400kV.

Ultra High Voltage Electrical Power Substation:

Substations where Operating Voltages are above 400kV is called Ultra High Voltage Substation

You might also like