C - SRT1F - e - Ed7 (Commissioning Report) PDF

Rep. 1740 Data 06/2002 Ed. 7 Em./Var Jul.
/2003 Firma Escudero
Esec. Elifani / Mariani Contr Escudero
SRT-1 F
COMMISSIONING REPORT
Customer: _____________ Country: ________________

Link: _____________ Work Order: ________________
Equipment: _____________
The commissioning of the referred link has been concluded on _______
The attached test sheets show the results of the tests carried out
We here undersign to certificate that the link under test fully complies
with the technical specifications as per contract.
FOR SIEMENS FOR CUSTOMER
_________________________ _________________________
DATE _______________
SRT 1 F 902-023/12 CI
Field Commissioning Test Sheets - 1/29 -
Copyright by: Siemens Information and Communication Networks S.p.A
Mod. 151-204/66
Ed. 02
Rep. 1740 Data 06/2002 Ed. 7 Em./Var Jul./2003 Firma Escudero
SRT-1 F FIELD COMMISSIONING TEST SHEET
CUSTOMER:
COUNTRY:
LINK:
ORDER:
STATION:
1. SRT-1 F EQUIPMENT BAND & SYSTEM TYPE
Frequency System type

[ ] 4 GHz [ ] 64 QAM [ ] 40 Mhz
[ ] 5 GHz [ ] 128 QAM [ ] 28 Mhz
[ ] 6U GHz [ ] 29 Mhz
[ ] 11 GHz [ ] (1+0) [ ] 29,65 Mhz
[ ] 4U GHz [ ] (N+0) [ ] Space Diversity
[ ] 6L GHz [ ] (1+1) Frequency Diversity [ ] No S.D.
[ ] 7L GHz [ ] (N+1) Frequency Diversity [ ] AP
[ ] 8L GHz [ ] Repeater [ ] CC
[ ] 13 GHz
CUSTOMER SIGNATURE:
SIEMENS SIGNATURE:
DATE:
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
2 Tests Sheets Index
Ref. INDEX Page

Commissioning Report 1
1 SRT 1 F Equipment Band and System Type 2
2 Test Sheets Index 3
3 Instruments check List 4
4 System Composition 8
5 PC Management Software 13
6 System Presetting 13
7 Local Transceiver Measurements 14
7.1 RF Output Level 14
7.2 Transmitter Spectrum Mask 14
7.3 L.O. Tx Frequency 15
7.4 Optical Interface Output Level 15
8 Feeder Measurement 16
8.1 Return loss 16
8.2 Cross Polar Decoupling 16
8.3 Space diversity Equalization 16
9 Hop Measurements 17
9.1 IF Frequency response 17
9.2 Received Power level 18
9.3 BER vs Receiver Test 19
9.4 Background BER Test 20
9.5 Service Channel Test 20
9.6 Radio Protection Switching Test (RPS) 20
10 Tables and Figures 21
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
3 Instruments Check List
Siemens Fujitsu, Serie Exxx or Equivalent.

Personal Computer
CPU Intel Pentium II, DRAM 128 Mb,
Proposed [ ] (minimal
HD 6 Gb,
requirement)
O.S: Windows NT/XP
Used
Proposed [ ] Sw Application LCT

Used
STM-1 Analyzer ANT 20 WG or Equivalent

Proposed [ ] SDH signal analyzer
(Whit “S1” Facility)
Used
Proposed [ ] Frequency Counter HP 5345A or Equivalent

Used
Proposed [ ] Variable Attenuator See Note

Used
1. INMET - 2 W DC Up to 18 GHz 10 dB
Fixed Attenuators Mod. 18N-10
Proposed [ ]
(10 and 20 dB) 2. INMET - 2 W DC Up to 18 GHz 20 dB
Mod. 18N-20
Used
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Proposed [ ] RF Coupler See Note
Used
Proposed [ ] 1 RF Cables SMA REYNOLS 219-0221 SMA / SMA (Male)

Used
3 RF Cables in N
Proposed [ ] REYNOLS 219-0088 N-N (Male)
(male 50 ohm)
Used
Complete Set of BB / Adapter 1,0/2,3 (Male), 1,6/5,6 (female)

Proposed [ ]
IF transition Adapter BNC(Male) , 1,6/5,6 (female)
Used
Connection cable, 75 Ohm, 1,6/5,6 , male/male

Proposed [ ] Test Cables or
Connection cable, 75 Ohm, 1,0/2,3 , male/male
Used
Complete Set of RF
Proposed [ ] transition (SMA / N
ecc..)
Used
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Waveguide to coax
Proposed [ ]
transitions
Used
RF Sweep signal
Proposed [ ] Agilent 83751 A or Equivalent
generator
Used
Power Meter with

HP 437B / HP 8481A / HP 8481 D / HP 8483D or
Proposed [ ] Normal and H.S.
Equivalent
power sensors
Used
Agilent E-4408B or HP8593E with MLA option

Proposed [ ] Spectrum Analyzer
code 11770A (*)
Used
Proposed [ ] Link Analyzer Anritsu ME453 M or equivalent (*)

Used
Proposed [ ] PC serial cable RS-232 pin-to-pin Sub-D 9pin M ⇔ Sub-D 9pin F

Used
Proposed [ ] Optical power meter Wg OLP - 25

Used
Optical signal
Proposed [ ] HP 37718 C with Optical Option
analyzer
Used
(*) The HP8593E with MLA option code 11770A, is able to perform the group delay and phase
adjustment (in this case use two HP instruments and not the Link Analyzer instrument).
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Note: Additional Specification for Tests Instruments
Flange Var. Att. with RF Range:

Range Freq. 3,3-4,9 Ghz (60 dB)
[ ] 11A110 FLANN MICROWAVE INDST.
R40
[ ] 12110 FLANN MICROWAVE INDST.
R48
R70
Range Freq. 6,5-10 Ghz (60 dB)
R84
R100
R120
R140
Or Equivalent
Flange Coupler with RF Range:
[ ] Range Freq. 3,3-4,9 Ghz (Dir. 46 dB) R40 11A132-10 F.M.I.
[ ] Range Freq. 3,9-5,9 Ghz (Dir. 46 dB) R48 12132-10 F.M.I.
[ ] Range Freq. 9,8-15 Ghz (Dir. 43 dB) R120 17132-10 F.M.I.
[ ] Range Freq. 11,9-18 Ghz (Dir. 43 dB) R140 18132-10 F.M.I.

Or Equivalent
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
4 System Composition
RF Branching Network Unit

BRU
Main Signal Transmission Unit

MSTU
Supervisory, Control & Switching

SCSU Unit
Base-Band Interface Unit

BBIU (option)
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
BRU
BRU
Branching Network Unit
MSTU1
MSTU2
MSTU3
MSTU4
MSTU5
MSTU6
MSTU7
MSTU8
MSTU
Main Signal Transmission Unit
[P] [M1] [M2] [M3] [M4] [M5] [M6] [M7]
Connection
SCSU
BSW1
BSW2
BSW3
BSW4
BSW5
BSW6
BSW7
Area
Supervisory, Control &
Switching Unit
** OCC INTF unit should be
installed underneath of the
** OCC INTF
BSW unit of last channel

ECU1
ECU2
SV
TCU X
TCU Y
HK1
HK2
BBIU (option)
BaseBand Interface Unit
BBIU is optional for Terminal

equipment of Optical interface
BBC
BB INTF P
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
BB INTF X
BB INTF Y
or PDH interface configuration
[M1] [M2] [M3] [M4] [M5] [M6] [M7]
BB INTF (X/Y) :
OPT INTF (X/Y) for STM-1 Optical Interface with MSP
*OPT INTF for STM-1 Optical Interface without MSP
*PE INTF for 140M PDH Electrical Interface
( * : OPT INTF or PE INTF should be mounted in slot X)
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Section Unit Equipped Hw Code & Ed. Serial Number

MSTU 1
[ ] Yes [ ] No
(Protection)
MSTU 2
[ ] Yes [ ] No
(Channel 1)
MSTU 3
[ ] Yes [ ] No
(Channel 2)
MSTU 4
[ ] Yes [ ] No
(Channel 3)
MSTU
MSTU 5
[ ] Yes [ ] No
(Channel 4)
MSTU 6
[ ] Yes [ ] No
(Channel 5)
MSTU 7
[ ] Yes [ ] No
(Channel 6)
MSTU 8
[ ] Yes [ ] No
(Channel 7)

BSW 1 [ ] Yes [ ] No
SCSU TCU X [ ] Yes [ ] No
TCU Y [ ] Yes [ ] No
HK 1 [ ] Yes [ ] No
HK 2 [ ] Yes [ ] No
OCC INTF [ ] Yes [ ] No
ECU 1 [ ] Yes [ ] No
ECU 2 [ ] Yes [ ] No
SV [ ] Yes [ ] No
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02

BBC [ ] Yes [ ] No
BB INTF (P) [ ] Yes [ ] No

BB INTF X
[ ] Yes [ ] No
(M1)
BB INTF Y
[ ] Yes [ ] No
(M1)
BB INTF X
[ ] Yes [ ] No
(M2)
BB INTF Y
[ ] Yes [ ] No
(M2)
BB INTF X
[ ] Yes [ ] No
(M3)
BB INTF Y
[ ] Yes [ ] No
(M3)
BBIU
BB INTF X
[ ] Yes [ ] No
(M4)
BB INTF Y
[ ] Yes [ ] No
(M4)
BB INTF X
[ ] Yes [ ] No
(M5)
BB INTF Y
[ ] Yes [ ] No
(M5)
BB INTF X
[ ] Yes [ ] No
(M6)
BB INTF Y
[ ] Yes [ ] No
(M6)
BB INTF X
[ ] Yes [ ] No
(M7)
BB INTF Y
[ ] Yes [ ] No
(M7)
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Flange connection
Flange mating
Frequency band
IEC standard
U4 GHz band PDR-40
4 GHz band PDR-40
5 GHz band UDR-48
L6 GHz band PDR-70
U6 GHz band PDR-70
L7 GHz band PDR-70
U7 GHz band PDR-70
L8 GHz band UDR-84
11 GHz band PDR-100
13 GHz band PDR-120
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
5 PC Management Software
Release Date Release Version
6 System Presetting
SYSTEM PRESETTING [ ] OK
Note:
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
7 Local Transceiver Measurement
7.1 RF Output Level

(At the Transmitter Output)
P Tx MSTU1 MSTU2 MSTU3 MSTU4 MSTU5 MSTU6 MSTU7 MSTU8
See Table
1&2
(ATPC HIGH)
See Note
(ATPC LOW)
ATPC Note
Automatic transmit power control (ATPC) is available as standard.
ATPC Power control level: 10 dB
Control initiation: Received signal threshold detection
Threshold setting: RSL:-45dBm/-55dBm/-65dBm
7.2 Transmitter Spectrum Mask
Ch: Ch: Ch: Ch: Ch: Ch: Ch: Ch:

Limit
………… ………… ………… ………… ………… ………… ………… …………
See Fig.
[ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK
1a, 1b, 1c
Please note : this measurement is to be performed for one Transmitter at a time, i.e. switching
off the other transmitters connected to the same antenna circulator
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
7.3 LO Tx Frequency
MEASURED VALUE (MHz)

TX L.O. Frequency NOMINAL VALUE (MHz)
(Tolerance :± 10 p.p.m)
MSTU1
MSTU2
MSTU3
MSTU4
MSTU5
MSTU6
MSTU7
MSTU8
7.4 Optical Interface Output Level N.A. [ ]
BB INTF BB INTF BB INTF BB INTF BB INTF BB INTF BB INTF

Limit M1 M2 M3 M4 M5 M6 M7
See Table 3
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
8 Feeder Measurements
8.1 Return Loss N.A. [ ]
MAIN DIVERSITY
NOMINAL VALUE ANTENNA + FEEDER ANTENNA + FEEDER
MEASURED VALUE MEASURED VALUE
≥ 23 dB
8.2 Cross Polar Decoupling N.A. [ ]
NOMINAL VALUE V to H DECOUPLING H to V DECOUPLING

≥ 27 dB
8.3 Space Diversity Equalization N.A. [ ]
MSTU MSTU MSTU MSTU MSTU MSTU MSTU MSTU

NOMINAL VALUE
……. ……. ……. ……. ……. ……. ……. …….
≤ 2 nsec
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
9 Hop Measurements
9.1 IF Frequency Response
AMPLITUDE RESPONSE
NOMINAL VALUE : ≤2.5 dB
MSTU 1 MSTU 2 MSTU 3 MSTU 4
MAIN RX
DIVERSITY RX N.A. [ ]

MAIN RX
N.B. In absence of fading and reflection
GROUP DELAY
NOMINAL VALUE : ≤20 ns
MAIN RX

MAIN RX
N.B. In absence of fading and reflection
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
9.2 Received Power Level
……. ……. ……. ……. ……. ……. ……. …….
TX Transmitted Power [dBm]

(at antenna circulator)
AG Antenna Gain [dB]
Diam…………mt.
TX FLT Feeder Loss [dB]
side ……mt. x ….dB/Mt
TS=TX + AG - FL
AG Antenna Gain [dB]
Diam…………mt.
RX FLR Feeder Loss [dB]
side ……mt. x ….dB/Mt
BL Rx Branching loss [dB]
RS=AG – FL - BL
DS Distance: 20 Log(D) [Km]
dist……..Km
Hop FQ Frequency: 20 Log(f)
[GHz] Freq…….Ghz
FSL Free Space Loss
FSL=DS+FQ+92,4
NRS Nominal Received Signal
(In normal propagation
condition)
NRS=TS+RS-FSL
Real Received Signal
RRS=NRS ±3 dBm
The Value of Prx measuremts are avaible in absence of reflection and in normal
propagation condition
N.B.
For Branching Loss value, see Table 4,5 and 6.
Consider that the value for Branching Loss are for the Hop
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
9.3 BER vs Receiver Test
BER 10-6 BER 10-3
RF received level at the See limits on Table 7 See limits on Table 7

MSTU Unit. (For test in
single disable via SW the (limits are valid in absence of (limits are valid in absence of
diversity equipment.) fading and during normal fading and during normal
propagation conditions) propagation conditions)
Measured Value Measured Value
MSTU 1 Main
Combined N.A. [ ]
MSTU 2 Main
Combined N.A. [ ]
MSTU 3 Main
Combined N.A. [ ]
MSTU 4 Main
Combined N.A. [ ]
MSTU 5 Main
Combined N.A. [ ]
MSTU 6 Main
Combined N.A. [ ]
MSTU 7 Main
Combined N.A. [ ]
MSTU 8 Main
Combined N.A. [ ]
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
9.4 Background BER Test

NOMINAL VALUE …….. …….. …….. …….. …….. …….. …….. ……..
Better Than 10-12
(ITU-R
Raccomandation)
(in normal
propagation
condition)
N.B. In absence of fanding and reflection
9.5 Service Channel test [ ] N.A
Selective Call [ ] OK
Omnibus Call [ ] OK
9.6 Radio Protection Switching (RPS) Test [ ] N.A
STM 1 [ ] 2 Mb/s [ ]
…….. …….. …….. …….. …….. …….. …….. ……..
Simulated Alarm B-
SW (bipolar switch)
Simulated Alarm U-
SW (unipolar switch)
SW Switch [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK [ ] OK
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
10 Tables and Figures
Table 1: Summary Specification
U4 L6 L7 U7 L8 13
Frequency Band (MHz) 3803.5- 5925-6425 7125-7425 7425-7725 7725-8275 12750-13250
4203.5
Modulation Type 128QAM-MLCM
Channel Spacing (MHz) 29 29.65 28 28 29.65 28
RF output power (dBm)(+/-1dB) +32 +32 +32 +32 +32 +27
Frequency Band (MHz) 4 5 U6 11

3600-4200 4400-5000 6430-7110 10700-11700
Modulation Type 64QAM-MLCM
Channel Spacing (MHz) 40 40 40 40
RF output power (dBm)(+/-1dB) +32 +32 +32 +29
Table 2: Loss of MSTU Cable Adaptor Loss
Band TX Main SD
(dB) (dB) (dB)
4G 0,30 0,45 0,50
U4G 0,30 0,45 0,50
5G 0,30 0,50 0,55
L6G 0,45 0,60 0,65
U6G 0,50 0,65 0,70
L7G 0,55 0,70 0,75
U7G 0,60 0,75 0,80
L8G 0,65 0,80 0,85
11G 0,70 0,90 0,95

13G 0,80 0,95 1,00
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
+1
0
14MHz
-10
+1dB
-20 19.5MHz
-10dB
-30
-40
24MHz
-35dB
-50
-60
-70
39.5MHz
-65dB
-80
-90
55MHz
-95dB
-100
0 5 10 15 20 25 30 35 40 45 50 55 100
RF frequency (MHz)
Figure 1a Transmitter output spectrum

(64QAM system, 40 MHz spacing)
(Exclude emissions which result from the modulation process)
Note: The Lowermost limit refers to RF Channel 8 – 1 and 81 – 11
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
+2
0
12MHz
-10 +2dB
14.5MHz 18MHz
-6dB -32dB
-20
-30
-40 17MHz
-32dB
-50
22MHz
-45dB
-60
-70
34MHz
-65dB
-80
60MHz
-90 -105dB
32MHz
-85dB
-100
40MHz
-95dB
-110
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
RF frequency
( )
Figure 1b Transmitter output spectrum
(128QAM system, 29 / 29.65 MHz spacing)
Note: The Lowermost limit refers to RF Channel 8 – 1 and 81 – 11
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
+1
0
13MHz
-10 +1dB
-20
21MHz
-35dB
-30
-40
20MHz
-35dB
-50
-60
-70
29.5MHz
-65dB
-80
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70
RF frequency
( )
Figure 1c Transmitter output spectrum

(128QAM system, 28 MHz spacing)
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Table 3 Technical specification for Optical STM-1 Interface
Bit Rate SDH level 1 155.52 Mbit/s ± 20 ppm

Unit Name OPT INTF 1 OPT INTF 2
Application code (ITU-T G.957) (S-1.1) (L-1.1)
Typical hop 0-15 Km 15-40 Km
Operation wavelength range (nm) 1260-1360 1280-1335
Transmitter at reference point S: Source type * MLM MLM
Spectral characteristics: Maximum RMS width (nm) 7.7 4.0
Maximum –20 dB width (nm)
Minimum side mode suppression ratio (dB)
Mean launched power: Maximum(dBm) –8 0
Minimum (dBm) –15 –5
Mi Bit rate nimum extinction ratio (dB 8.2 10
Optical path between S & R: Attenuation range (dB) 0–12 10–28
Maximum dispersion ps/nm) 96 N/A
Optical path between S and R: Attenuation range 0-12 10-28
Maximum dispersion (ps/nm) 96 186
Minimum optical return loss of cable point at NA NA
S,including and connectors (dB)
Maximum discrete reflectance between S and R NA NA
Receiving at reference point R
Minimum sensitivity (dBm) –28 –34
Minimum overload –8 –10
Maximum optical path penalty (including chirp penalty
and dispersion penalty (dB) 1 1
Maximum reflectance of receiver,
measured at R (dB) NA NA
Connector Used SC type or FC type
* Note : MLM = Multi-Longitudinal Mode
SLM = Single-Longitudinal Mode
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
BRU Diagram Connection
Fig. 2a: AP and 1x (N+1)CC BRU
Fig. 2b: 2x (N+1) CC BRU
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Table 4: Tx. BRU Loss (Specified value)
BRU FREQUENCY MSTU 1 MSTU 2 MSTU 3 MSTU 4 MSTU 5 MSTU 6 MSTU 7 MSTU 8
4 3,0 2,5 3,8 3,3 3,0 2,5 3,8 3,3
U4 3,2 2,7 4,0 3,5 3,2 2,7 4,0 3,5
5 3,3 2,8 4,3 3,8 3,3 2,8 4,3 3,8
L6/U6 3,5 3 4,7 4,2 3,5 3 4,7 4,2
AP L7 4,6 3,9 5,8 5,1 4,6 3,9 5,8 5,1
1x (N+1) CC U7 4,8 4,1 6,0 5,3 4,8 4,1 6,0 5,3
L8 4,9 4,2 6,1 5,4 4,9 4,2 6,1 5,4
11 4,5 5,7 5,6 6,8 4,5 5,7 5,6 6,8
13 5,3 4,6 6,3 5,6 5,3 4,6 6,3 5,6
4 3,0 2,5 3,8 3,3 4,6 4,1 5,4
U4 3,2 2,7 4,0 3,5 4,8 4,3
5 3,3 2,8 4,3 3,8 5,3 4,8 6,3
2x (N+1) CC L6/U6 3,5 3 4,7 4,2 5,9 5,4 7,1 6,6
L8 4,9 4,2 6,1 5,4 7,3 6,6 8,5 7,8
11 4,5 5,7 5,6 6,8 6,7 7,9 7,8 9,0
13 5,3 4,6 6,3 5,6 7,3 6,6 8,3 7,6
Table 5: Rx. BRU Loss (Specified value)
BRU FREQUENCY MSTU 1 MSTU 2 MSTU 3 MSTU 4 MSTU 5 MSTU 6 MSTU 7 MSTU 8
4 3,8 3,3 3,0 2,5 3,8 3,3 3,0 2,5
U4 4,0 3,5 3,2 2,7 4,0 3,5 3,2 2,7
5 4,3 3,8 3,3 2,8 4,3 3,8 3,3 2,8
L6/U6 4,7 4,2 3,5 3 4,7 4,2 3,5 3
AP L7 5,8 5,1 4,6 3,9 5,8 5,1 4,6 3,9
1x (N+1) CC U7 6,0 5,3 4,8 4,1 6,0 5,3 4,8 4,1
L8 6,1 5,4 4,9 4,2 6,1 5,4 4,9 4,2
11 5,6 6,8 4,5 5,7 5,6 6,8 4,5 5,7
13 6,3 5,6 5,3 4,6 6,3 5,6 5,3 4,6
4 4,9 5,4 4,1 4,6 3,3 3,8 2,5
U4 5,1 5,6 4,3 4,8 3,5 4,0
5 5,8 6,3 4,8 5,3 3,8 4,3 2,8
2x (N+1) CC L6/U6 6,6 7,1 5,4 5,9 4,2 4,7 3 3,5
L8 7,8 8,5 6,6 7,3 5,4 6,1 4,2 4,9
11 9,0 7,8 7,9 6,7 6,8 5,6 5,7 4,5
13 7,6 8,3 6,6 7,3 5,6 6,3 4,6 5,3
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Table 6: Total BRU Loss (Specified value)
4G U4G 5G L6G U6G L7G U7G L8G 11G 13G

1+0 AP 6,0 5,8 6,0 7,6 7,3 8,6 8,6 8,8 9,0 11,1
CC 6,0 5,8 6,0 7,6 7,3 8,6 8,6 8,8 9,0 11,1
1+1 AP 6,0 5,8 6,0 7,6 7,3 8,6 8,6 8,8 9,0 11,1
CC 6,0 5,8 6,0 7,6 7,3 8,6 8,6 8,8 9,0 11,1
2+1 AP 7,0 6,7 7,0 8,7 8,4 9,9 9,9 10,0 10,6 12,5
CC 7,0 6,7 7,0 8,7 8,4 9,9 9,9 10,0 10,6 12,5
3+1 AP 7,0 6,7 7,0 8,7 8,4 9,9 9,9 10,0 10,6 12,5
CC 7,0 6,7 7,0 8,7 8,4 9,9 9,9 10,0 10,6 12,5
4+1 AP
CC 8,0 10,2 8,0 9,8 9,4 11,2 11,9 13,7
5+1 AP
CC 8,0 10,2 8,0 9,8 9,4 11,2 11,9 13,7
6+1 AP
CC 11,6 11,7 13,6 13,4 15,5 12,9 14,8
7+1 AP
CC 13,6 13,4 15,5 12,9 14,8
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02
Table 7: BER vs Receiver Signal Level
Frequency Modulation Type

BER 10-6 (dBm) BER 10-3 (dBm)
band
U4
3803.5-4203.5
- 68 - 72
L6
5925-6425
- 68 - 72
L7
7125-7425
- 68 - 72
128QAM-MLCM
U7
7425-7725
- 68 - 72
L8
7725-8275
- 68 - 72
13
12750-13250
- 65.5 - 69.5
4
3600-4200
- 70.5 -74.5
5
4400-5000
- 70.5 -74.5
64QAM-MLCM
U6
6430-7110
- 70.5 -74.5
11
10700-11700
- 69.5 - 73.5
Note 1 : Space Diversity improves RSL by 2 dB.

Note 2 : Measured at MSTU input
SRT 1 F 902-023/12 CI
Mod. 151-204/66
Ed. 02

C - SRT1F - e - Ed7 (Commissioning Report) PDF

Uploaded by

Copyright:

Available Formats

C - SRT1F - e - Ed7 (Commissioning Report) PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

C - SRT1F - e - Ed7 (Commissioning Report) PDF

Uploaded by

Copyright:

Available Formats

Rep. 1740 Data 06/2002 Ed. 7 Em./Var Jul.

/2003 Firma Escudero

Esec. Elifani / Mariani Contr Escudero

Customer: _____________ Country: ________________

The commissioning of the referred link has been concluded on _______

FOR SIEMENS FOR CUSTOMER

Esec. Elifani / Mariani Contr Escudero

SRT-1 F FIELD COMMISSIONING TEST SHEET

1. SRT-1 F EQUIPMENT BAND & SYSTEM TYPE

Frequency System type

[ ] 5 GHz [ ] 128 QAM [ ] 28 Mhz

[ ] 11 GHz [ ] (1+0) [ ] 29,65 Mhz

[ ] 4U GHz [ ] (N+0) [ ] Space Diversity

[ ] 6L GHz [ ] (1+1) Frequency Diversity [ ] No S.D.

[ ] 7L GHz [ ] (N+1) Frequency Diversity [ ] AP

Esec. Elifani / Mariani Contr Escudero

2 Tests Sheets Index

Ref. INDEX Page

Esec. Elifani / Mariani Contr Escudero

3 Instruments Check List

Siemens Fujitsu, Serie Exxx or Equivalent.

Proposed [ ] Sw Application LCT

STM-1 Analyzer ANT 20 WG or Equivalent

Proposed [ ] Frequency Counter HP 5345A or Equivalent

Proposed [ ] Variable Attenuator See Note

Esec. Elifani / Mariani Contr Escudero

Proposed [ ] RF Coupler See Note

Proposed [ ] 1 RF Cables SMA REYNOLS 219-0221 SMA / SMA (Male)

Complete Set of BB / Adapter 1,0/2,3 (Male), 1,6/5,6 (female)

Connection cable, 75 Ohm, 1,6/5,6 , male/male

Esec. Elifani / Mariani Contr Escudero

Power Meter with

Agilent E-4408B or HP8593E with MLA option

Proposed [ ] Link Analyzer Anritsu ME453 M or equivalent (*)

Proposed [ ] PC serial cable RS-232 pin-to-pin Sub-D 9pin M ⇔ Sub-D 9pin F

Proposed [ ] Optical power meter Wg OLP - 25

Esec. Elifani / Mariani Contr Escudero

Note: Additional Specification for Tests Instruments

Flange Var. Att. with RF Range:

Flange Coupler with RF Range:

[ ] Range Freq. 3,3-4,9 Ghz (Dir. 46 dB) R40 11A132-10 F.M.I.

[ ] Range Freq. 3,9-5,9 Ghz (Dir. 46 dB) R48 12132-10 F.M.I.

[ ] Range Freq. 5,3-8,1 Ghz (Dir. 46 dB) R70 14132-10 F.M.I.

[ ] Range Freq. 8,2-12,5 Ghz (Dir. 46 dB) R100 16132-10 F.M.I.

[ ] Range Freq. 9,8-15 Ghz (Dir. 43 dB) R120 17132-10 F.M.I.

[ ] Range Freq. 11,9-18 Ghz (Dir. 43 dB) R140 18132-10 F.M.I.

Esec. Elifani / Mariani Contr Escudero

RF Branching Network Unit

Main Signal Transmission Unit

Supervisory, Control & Switching

Base-Band Interface Unit

Esec. Elifani / Mariani Contr Escudero

[P] [M1] [M2] [M3] [M4] [M5] [M6] [M7]

BSW unit of last channel

BBIU is optional for Terminal

or PDH interface configuration

[M1] [M2] [M3] [M4] [M5] [M6] [M7]

Esec. Elifani / Mariani Contr Escudero

Section Unit Equipped Hw Code & Ed. Serial Number

Customer: _ Country: ____