Scribd Logo
Upload

Welcome to Scribd!

  • 143 views

    2D-D3 Teknik Kimia (OTK-1)

    Uploaded by

    Lutfiah Khasanah
    The document provides information about predicting filtration and washing times for a plate-and-frame press and leaf filter. It asks the reader to calculate: 1) The time to filter 2.26 m3 of filtrate from a slurry using a 30 frame, 0.873 m2/frame plate-and-frame press at 46.2 kN/m2 pressure. 2) The washing time using 0.283 m3 of wash water and the total cycle time including 30 minutes of cleaning. 3) The time to filter 1 m3 of filtrate from the same slurry using a leaf filter with an area of 6.97 m2. 4) The time to wash the filter cake

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    2D-D3 Teknik Kimia (OTK-1)

    Uploaded by

    Lutfiah Khasanah
    143 views6 pages
    The document provides information about predicting filtration and washing times for a plate-and-frame press and leaf filter. It asks the reader to calculate: 1) The time to filter 2.26 m3 of filtrate from a slurry using a 30 frame, 0.873 m2/frame plate-and-frame press at 46.2 kN/m2 pressure. 2) The washing time using 0.283 m3 of wash water and the total cycle time including 30 minutes of cleaning. 3) The time to filter 1 m3 of filtrate from the same slurry using a leaf filter with an area of 6.97 m2. 4) The time to wash the filter cake

    Original Title

    2D-D3 Teknik Kimia (OTK-1).docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides information about predicting filtration and washing times for a plate-and-frame press and leaf filter. It asks the reader to calculate: 1) The time to filter 2.26 m3 of filtrate from a slurry using a 30 frame, 0.873 m2/frame plate-and-frame press at 46.2 kN/m2 pressure. 2) The washing time using 0.283 m3 of wash water and the total cycle time including 30 minutes of cleaning. 3) The time to filter 1 m3 of filtrate from the same slurry using a leaf filter with an area of 6.97 m2. 4) The time to wash the filter cake

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    143 views6 pages

    2D-D3 Teknik Kimia (OTK-1)

    Uploaded by

    Lutfiah Khasanah
    The document provides information about predicting filtration and washing times for a plate-and-frame press and leaf filter. It asks the reader to calculate: 1) The time to filter 2.26 m3 of filtrate from a slurry using a 30 frame, 0.873 m2/frame plate-and-frame press at 46.2 kN/m2 pressure. 2) The washing time using 0.283 m3 of wash water and the total cycle time including 30 minutes of cleaning. 3) The time to filter 1 m3 of filtrate from the same slurry using a leaf filter with an area of 6.97 m2. 4) The time to wash the filter cake

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 6

    1. Prediction of filtration Time and Washing Time. The Slurry used in Problem 14.

    2-1 is to be filtered
    in a plate-and-frame press having 30 frames and 0.873 m²area per frame. The same pressure 46.2
    kN/m², will be used in constands-pressure filtration. Assume the same filter-cake properties and filter
    cloth, and calculate the time to recover 2.26 m³ of filtrate. At the end, using through-washing and
    0.283 m³ of wash water , calculate the time of washing and the total filter-cycle time if cleaning the
    press takes 30 min.

    Answer :
    2. Constant pressure filtration and washing in a leaf filter. An experimental filter press having
    an area of 0.0414 m2 (R1) is used to filter an aqueous BaCO3 slurry at a constant pressure of
    267 kPa. The filtration equation obtained was

    t
    = 10.25 x 106V + 3.4 x 103
    V

    Where t is in s and in m3 .

    a) If the same slurry and conditions are used in a leaf press having an area of 6.97 m2,
    how long will it take to obtain 1.00 m3 of filtrate?
    b) After the filtration the cake is to be washed with 0.100 m3 of water. Calculate the time
    of washing.
    Answer :

    You might also like