Scribd Logo
Upload

Welcome to Scribd!

  • 49 views

    CCNA4 Case Study

    Uploaded by

    Kim Oliver
    - VB is a bank database center with two branches (Branch 1 and Branch 2) connected via a WAN link. Each branch has its own router, switch, and database server to store client information. - The branches are connected to each other and to the internet via their routers using Frame Relay. EIGRP routing protocol is configured to allow communication between LANs of each branch and across the WAN. - Access control lists and passwords are configured on the routers to secure remote access and prevent unauthorized access to devices and databases.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    CCNA4 Case Study

    Uploaded by

    Kim Oliver
    49 views6 pages
    - VB is a bank database center with two branches (Branch 1 and Branch 2) connected via a WAN link. Each branch has its own router, switch, and database server to store client information. - The branches are connected to each other and to the internet via their routers using Frame Relay. EIGRP routing protocol is configured to allow communication between LANs of each branch and across the WAN. - Access control lists and passwords are configured on the routers to secure remote access and prevent unauthorized access to devices and databases.

    Original Description:

    m,hgjhg

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    - VB is a bank database center with two branches (Branch 1 and Branch 2) connected via a WAN link. Each branch has its own router, switch, and database server to store client information. - The branches are connected to each other and to the internet via their routers using Frame Relay. EIGRP routing protocol is configured to allow communication between LANs of each branch and across the WAN. - Access control lists and passwords are configured on the routers to secure remote access and prevent unauthorized access to devices and databases.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    49 views6 pages

    CCNA4 Case Study

    Uploaded by

    Kim Oliver
    - VB is a bank database center with two branches (Branch 1 and Branch 2) connected via a WAN link. Each branch has its own router, switch, and database server to store client information. - The branches are connected to each other and to the internet via their routers using Frame Relay. EIGRP routing protocol is configured to allow communication between LANs of each branch and across the WAN. - Access control lists and passwords are configured on the routers to secure remote access and prevent unauthorized access to devices and databases.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    You are on page 1of 6

    Republic of the Philippines

    EASTERN VISAYAS STATE UNIVERSITY


    Tacloban City

    CASE STUDY
    FOR
    CCNA 4 – WAN TECHNOLOGY

    Submitted by:
    Kim Oliver M. Villar
    BSECE 5A

    Submitted to:
    Engr. Chito Petilla
    INSTRUCTOR
    Title:

    VB ( Bank-based Database Center)

    Scenario:
    VB is a Bank-based Database Center that has two branches. The main branch (Branch 1)

    and the Satellite Branch (Branch 2). The main operation of the Database Center is that both

    networks are being managed by their own branch manager. The branch managers oversee the

    operation in their respective branch. Each branch has three sectors, The Tellers, Loan Counters

    and the Time Deposit Counters and are connected by swiches to a single router. The router is

    connected to the ISP and to the branch manager and database.

    Each Branch has their own database where they store client and branch information. The

    database is only accessible to the Branch Managers since they are the one in charge of each

    branch. The branch managers also have the capability to check on the other branch and collect

    necessary data or analytics.


    Topology:

    Addressing Table:
    Device Interface Ip Address Subnet Default Gateway
    Branch1Router S0/0/0 10.1.2.2 255.255.255.0
    F0/0 192.168.1.1 255.255.255.0
    F0/1 192.168.2.1 255.255.255.0
    Server 1 192.168.2.3 255.255.255.0 192.168.2.1
    Branch2Router S0/0/0 10.1.2.1 255.255.255.0
    F0/0 192.168.3.1 255.255.255.0
    F0/1 192.168.4.1 255.255.255.0
    Server 2 192.168.4.3 255.255.255.0 192.168.4.1
    Teller1 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    Teller2 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    Teller3 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    LoanCounter1 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    LoanCounter2 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    Timedeposit1 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    Timedeposit1 F/0 192.168.1.2 255.255.255.0 192.168.1.1
    Manager1 F/0 192.168.2.2 255.255.255.0 192.168.2.1
    Teller4 F/0 192.168.3.2 255.255.255.0 192.168.3.1
    Teller5 F/0 192.168.3.3 255.255.255.0 192.168.3.1
    Teller6 F/0 192.168.3.4 255.255.255.0 192.168.3.1
    LoanCounter3 F/0 192.168.3.5 255.255.255.0 192.168.3.1
    LoanCounter4 F/0 192.168.3.6 255.255.255.0 192.168.3.1
    Timedeposit3 F/0 192.168.3.7 255.255.255.0 192.168.3.1
    Timedeposit4 F/0 192.168.3.8 255.255.255.0 192.168.3.1
    Manager2 F/0 192.168.4.2 255.255.255.0 192.168.4.1

    Device Interface DLCI Device Interface DLCI


    Branch1Router S0/0/0 201 Branch2Router S0/0/0 102

    Codes
    Branch1Router

    Router>en
    Router#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#line vty 0 4
    Router(config-line)#password villar
    Router(config-line)#login
    Router(config-line)#line con 0
    Router(config-line)#password villar
    Router(config-line)#login
    Router(config-line)#no exec-timeout
    Router(config-line)#exit
    Router(config)#enable secret villar
    Router(config)#no ip domain lookup

    Router(config)#
    Router(config)#int s0/0/0
    Router(config-if)#ip address 10.1.1.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#encapsulation frame-relay
    Router(config-if)#exit
    Router(config)#int f0/0
    Router(config-if)#ip address 192.168.1.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#exit
    Router(config)#int f0/1
    Router(config-if)#ip address 192.168.2.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#exit
    Router(config)#router eigrp 1
    Router(config-router)#network 192.168.1.1
    Router(config-router)#network 192.168.2.1
    Router(config-router)#network 10.1.1.1
    Router(config-router)#end
    Router#

    Router#configure terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#interface Serial0/0/0
    Router(config-if)#ip address 10.1.2.2 255.255.255.0
    Router(config-if)#
    %DUAL-5-NBRCHANGE: IP-EIGRP 1: Neighbor 10.1.2.1 (Serial0/0/0) is up: new adjacency

    Router(config-if)#exit
    Router(config)#router eigrp 1
    Router(config-router)#network 10.1.2.2
    Router(config-router)#exit
    Router(config)#exit
    Router#
    %SYS-5-CONFIG_I: Configured from console by console

    Branch2Router

    Router>en
    Router#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    Router(config)#line vty 0 4
    Router(config-line)#password villar
    Router(config-line)#login
    Router(config-line)#line con 0
    Router(config-line)#password villar
    Router(config-line)#login
    Router(config-line)#no exec-timeout
    Router(config-line)#exit
    Router(config)#enable secret villar
    Router(config)#no ip domain lookup

    Router(config)#
    Router(config)#int s0/0/0
    Router(config-if)#ip address 10.1.2.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#encapsulation frame-relay
    Router(config-if)#exit
    Router(config)#int f0/0
    Router(config-if)#ip address 192.168.3.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#exit
    Router(config)#int f0/1
    Router(config-if)#ip address 192.168.4.1 255.255.255.0
    Router(config-if)#no shut

    Router(config-if)#exit
    Router(config)#router eigrp 1
    Router(config-router)#network 192.168.3.1
    Router(config-router)#network 192.168.4.1
    Router(config-router)#network 10.1.2.1
    Router(config-router)#end
    Router#

    You might also like