Cbgad My16 PDF

Applied Technology Group Sdn Bhd (1012178-W)
W-5-3, Subang Square Business Centre, Jalan SS15/4G,

47500 Subang Jaya, Selangor, Malaysia.
Tel: (+603) 5634 7905 Fax: (+603) 5637 9945
Email: [email protected] Website: www.apptechgroups.net
Course on Concrete Box Girder Analysis and Design

(Part 1)
Date : 12 - 13 April 2016
Time : 9.00 am to 5.00 pm
Venue : Hartsford Conference Centre, Crown Regency Serviced Suites, Kuala Lumpur
COURSE OVERVIEW
The concrete Box Girder Analysis and Design course consists 5 parts. The Part 1 is the fundamental knowledge of the
box girder analysis. It is essential basic knowledge for the engineer who are new on the concrete box girder analysis
and design. The part 1 will be emphasize on the box girder section for short span, medium span up to 100m span.
The requirements of the precast segmental construction and cast in-situ construction as well as composite between
precast and cast in-situ. Some basic analysis will be touched at the end of the course too.
BENEFITS OF THE COURSE
After completion of course, the candidate should know how to draw up the box girder section (constant section and
the haunch section). The requirements for the precast segmental box girder and in-situ box girder before analysis
and design.
Special Discount
Early Bird Discount RM 100 Register for course and pay before 12 March 2016
Supported by: The Institution of Structural Engineers, Malaysia.

Course on Concrete Box Girder Analysis and Design (Part 1)
SPEAKER PROFILE
Ir. Teh Tzyy Wooi
Ir. Teh Tzyy Wooi, PEng. CEng. obtained his BEng in Civil & Structural Engineering from UKM and obtained his Msc in
Bridge Engineering (with Distinction) from University of Surrey. He is Fellow of IEM and corporate member of
Institution of Civil Engineers and Institution of Structural Engineers, UK. He has presented few talks in IEM and other
institutions. Engineer Teh has done various type of box girder bridge design for highways and rail projects locally and
abroad. He has involved the construction engineering design for the box girder bridges for contractors. The most
recent project Membina Jejambat menyambungkan Jalan Dewan Bahasa – Jalan Hang Tuah which he is being awarded
“Young Engineer Award 2009”. He has involved projects in oversea such as Hong Kong, Indonesia, Nigeria and Brunei
too. Currently, he is one of the Director of H&T ASSOCIATES Sdn Bhd.
WHO SHOULD ATTEND

The course is valuable for practicing structural and bridge engineers, contractors, project managers as well as
academicians who are interested in the box girder bridge design. Site Managers, and Technical Personnel and
managers who would like to gain further knowledge and practical approach in this area are also encouraged to
participate in view of the vast experience of the speaker.
Claimable under HRDF SBL scheme subject to max limit allowed.

20 CIDB Approved CCD-Points (Ref No.: CIDBWP/C/2015/0426), 12 BEM Approved CPD-Hours (Ref No.: ISE/MD/CPD/ATG/012)
12 Approved PEB PDUs Singapore
COURSE SCHEDULE
Session 1:
9.00am – 10.30am
Introduction
Basis Requirements of Box Girder Analysis and Design
10.30am – 10.45am MORNING TEA BREAK

Session 2:
10.45am – 12.30pm
Basis of Box Girder Dimension – Short Span (less than 50m)
12.30pm – 1.30pm LUNCH

Session 3:
1.30pm – 3.00pm Basis of Box Girder Dimension – Medium Span (more than 50m)
Basis of Box Girder Dimension – Long Span (more than 80m)
3.00pm – 3.15pm TEA BREAK
Session 4:
3.15pm – 4.15pm
Internal Prestressed Requirements
External Prestressed Requirements
4.15pm – 5.00pm Questions and Answers/Discussion

COURSE SCHEDULE
Session 5:
9.00am – 10.30am Top Blister Dimension & Requirements

Bottom Blister Dimension & Requirements
10.30am – 10.45am MORNING TEA BREAK
Session 6:
10.45am – 12.30pm Deviator Dimension & Requirements

Shear Key
Box Girder Dimension Conclusion for Precast and In-situ
12.30pm – 1.30pm LUNCH
Session 7:
1.30pm – 3.00pm
Basic Analysis Modelling for Longitudinal Analysis
3.00pm – 3.15pm TEA BREAK
Session 8:
3.15pm – 4.15pm
Basic Analysis Modelling for Transverse Analysis
4.15pm – 5.00pm Questions and Answers/Discussion

Registration Fee
Applied Technology Group
Fee
GST TOTAL
Before
(6%)
GST
COURSE REGISTRATION FORM
Individual Fee RM2,000 RM120 RM2,120
Course title:
Concrete Box Girders Analysis and Group Fee RM1,800 RM108 RM1,908
(3 or more delegates)
Design (Part 1)
 Please tick) Closing date: 5 April 2016. An early bird discount of RM100 for
payment received before 12 March 2016.
12 - 13 April 2016
Hartsford Conference Centre, Crown Regency
Serviced Suites, Kuala Lumpur Payment
Payment is to make payable to:
Company Information Applied Technology Group Sdn Bhd
Public Bank Berhad (Malaysia)
Company: Account no: 3178247302
GST Registration Number: 000641294336
Address: Payment terms:

Payment is required before the event. Once payment is
received, your seat will be reserved. Registration fee includes
State/ Province: lunch, refreshments and full training documentation as
specified. Delegates may be refused admission if payment is
Zip/Postal Code: not received prior to the event. The fee does not include hotel
accommodation.
Country:
Contact Person: Cancellation Policy

All cancellation of registration must be made in writing.
Email: If you are unable to attend:
a) A substitute delegate is welcomed at no additional
Phone: charge.
b) Your registration can be credited to a future event.
Attendee Information c) You will receive a full refund less 10% administration
charge if cancellation is received in writing more than 14
Name (1) days before the event.
d) No cancellations will be accepted within 14 days before the
Job title: event start date. Full course documentation will however be
sent to the delegate.
E-mail:
Course Schedule
Mobile/Tel No: Course starts at 9.00am and ends at 5.00pm daily. Please
arrive at 8.30am on day one to allow time to register and receive
Name (2) course materials.
Job title:
Please send completed form to:
E-mail: Fax to: +603 5637 9945
or Email to : [email protected]
Mobile/Tel No: For enquiry, please call: +603 5634 7905
Or refer to our website www.apptechgroups.net
Name (3)
Job title: Applied Technology Group Sdn Bhd

W-5-3, Subang Square Business Centre,
E-mail: Jalan SS15/4G,
47500 Subang Jaya, Selangor, Malaysia.
Mobile/Tel No:

Cbgad My16 PDF

Uploaded by

Copyright:

Available Formats

Cbgad My16 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cbgad My16 PDF

Uploaded by

Copyright:

Available Formats

Applied Technology Group Sdn Bhd (1012178-W)

W-5-3, Subang Square Business Centre, Jalan SS15/4G,

Course on Concrete Box Girder Analysis and Design

BENEFITS OF THE COURSE

Supported by: The Institution of Structural Engineers, Malaysia.

Ir. Teh Tzyy Wooi

too. Currently, he is one of the Director of H&T ASSOCIATES Sdn Bhd.

WHO SHOULD ATTEND

Claimable under HRDF SBL scheme subject to max limit allowed.

10.30am – 10.45am MORNING TEA BREAK

12.30pm – 1.30pm LUNCH

3.00pm – 3.15pm TEA BREAK

4.15pm – 5.00pm Questions and Answers/Discussion

9.00am – 10.30am Top Blister Dimension & Requirements

10.30am – 10.45am MORNING TEA BREAK

10.45am – 12.30pm Deviator Dimension & Requirements

12.30pm – 1.30pm LUNCH

3.00pm – 3.15pm TEA BREAK

4.15pm – 5.00pm Questions and Answers/Discussion

Address: Payment terms:

Contact Person: Cancellation Policy

Job title: Applied Technology Group Sdn Bhd

You might also like