Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Chem 170

Stoichiometric Calculations

Module One
Units, Scientific Notation, Significant Figures and
Dimensional Analysis

DePauw University – Department of Chemistry and Biochemistry Page 1

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Introduction to Module One

Look at this piece of paper and list some of its characteristics. Many of the items on your
list will be qualitative because they use descriptive phrases to describe the paper’s
qualities. Examples of qualitative descriptions include “the paper is white,” “the paper is
rectangular” and “the paper has funny black marks all over it.” Other characteristics are
quantitative; that is, they include numbers and units in their descriptions. For example,
“the paper is 11 inches long” and “there are 5 sentences in this paragraph.”

Chemists frequently make use of qualitative and quantitative information. In our

introductory courses in organic chemistry, inorganic chemistry, and biochemistry, for
example, you will learn how chemists determine a molecule’s structure (the physical
connections between atoms and the resulting 3-dimensional shape) and how this
qualitative property affects its chemical behavior. Chemists also use quantitative
information to characterize chemical reactivity. For example, some reactions proceed
very quickly, while others are very slow. A reaction’s rate, therefore, provides a
quantitative measure of how quickly it occurs.

Objectives for Module One

This module covers the basic tools for working with quantitative information, including
the standard units used in chemistry, scientific notation, the importance of significant
figures when expressing the result of a calculation and the use of dimensional analysis
when converting between units. In completing this module you will master the following
specific objectives:

• to recognize the units of the SI system

• to be able to express SI units with different prefixes

• to covert between the Fahrenheit, Celsius and Kelvin temperature scales

• to calculate the density of an object

• to express numbers using scientific notation

• to state the number of significant figures in a measurement

• to express the result of a calculation to the correct number of significant figures

• to use dimensional analysis to convert between units

DePauw University – Department of Chemistry and Biochemistry Page 2

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Units of Measurement
If you measure the length of this page you might report your answer as 11 inches or as
27.9 centimeters, depending upon which scale you use. Having different units for length
is at worst mildly annoying. As long as we know the relationship between units (e.g.
1 inch is equivalent to 2.54 cm) we can easily convert between them. Of greater concern
to scientists is knowing a unit’s accuracy. Defining one unit in terms of another unit
doesn’t help. We know that there are 12 inches in a foot, but what is a foot? It should be
clear that a measurement is poorly defined if we cannot trace it to an absolute standard
that is acceptable to all scientists.

SI Units. At one time the standard unit of length was the cubit, defined as the length of a
person’s forearm from the elbow to the tip of his or her middle finger. Defining a cubit
in this manner makes it a relative measure of length because each individual’s arm is of
different length. The standard scientific measurement units used today are those
established in 1960 by the General Conference of Weights and Measures, more
commonly known as the Système Internationale d’Unités, or SI units. Table 1 lists the
seven base SI units and their symbols. If you’re interested, the National Institute of
Standards and Technology web-site (http://www.physics.nist.gov/cuu/Units) provides a
historical overview of these base units, including the current absolute standard for each. †

Table 1. Base SI Units

Quantity Name of SI Unit Symbol
length meter m
mass kilogram kg
time second s
electric current ampere A
temperature Kelvin K
amount of substance mole mol
luminous intensity candela cd

All other SI units can be derived from these base units. For example, force (F), which is
the product of an object’s mass and its acceleration, has units of kg m/s2 (or kg m s-2).

The base SI unit for mass differs from the other base SI units because it contains two
parts. The first part, kilo-, is a prefix meaning 1000, and the second part, gram, is a
smaller unit of mass. The use of prefixes is common in the SI system; for example, a
nanosecond (ns) is 0.000000001 seconds and a kilometer (km) is 1000 meters. Table 2
lists many of the most commonly used prefixes.

†
For example, at one time the absolute standard for mass was one cubic decimeter of water. Following
the 1st General Conference on Weights and Measures (held in 1889) the absolute standard was redefined
as a specially manufactured rod of a platinum-iridium alloy stored at the International Bureau of Weights
and Measures. This continues to be the absolute standard for mass.

DePauw University – Department of Chemistry and Biochemistry Page 3

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Table 2. Prefixes Used in the SI System

Prefix Symbol Meaning Prefix Symbol Meaning
Tera- T 1,000,000,000,000 Centi- c 0.01
Giga- G 1,000,000,000 Milli- m 0.001
Mega- M 1,000,000 Micro- μ 0.000001
Kilo- k 1,000 Nano- n 0.000000001
Deci- d 0.1 Pico- p 0.000000000001

SI Units of Particular Importance to Chemists. Of the seven base units, the most
important for us are length, mass, time, temperature, and amount of substance. Other
units derived from these base units are volume, density, pressure, and concentration.
Several of these units are briefly considered here; others are discussed in later modules.

Length. Atoms are very small; thus, chemists often express length in nanometers or
picometers. For example, the radius of a helium atom is 50 picometers (pm) and the
distance between two carbon atoms in ethanol is 0.15 nanometers (nm). An older unit for
expressing length is the angstrom (Å), which is equivalent to 100 pm or 0.00000001 cm.

Mass. Chemists use the gram, not the kilogram, as the base SI unit.

Time. In chemistry the most common use of time is measuring the speed of a reaction.
Fast reactions are reported using the second as the base unit. It is not uncommon, for
example, to study reactions occurring on a millisecond or nanosecond time-scale. Slower
reactions, however, usually are measured in minutes or hours instead of kiloseconds.

Temperature. Although Kelvin is the SI unit for temperature, there are two other
common non-SI temperature scales. The Fahrenheit scale (oF), which is used in daily
life, defines the boiling point and freezing point of water as 212oF and 32oF, respectively.
The Celsius scale (oC), which is commonly used in the laboratory, assigns 100oC and 0oC
to, respectively, the boiling point and freezing point of water. The following equations
allow the conversion between these two units †

o
F=
9 o
5
( C)+ 32 o
C=
9
(
5 o
F − 32)
Example 1. A child running a fever has a temperature of 100.6oF. Express this
temperature in oC.

Solution. Using the equation for converting °F to °C gives

o
C=
9
(
5 o
) o
100.6 − 32 = 38.1 C

†
Many scientific calculators include a key that converts between °F and °C; nevertheless, you should
know how to make the conversion on your own.

DePauw University – Department of Chemistry and Biochemistry Page 4

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Example 2. A bank’s “time/temperature” display is not working properly, showing the

temperature only in oC. What is the temperature in oF if the display reads -4.5oC?

Solution. Using the equation for converting °C to °F gives

9
o
F= (−4.5) + 32 = 23.9o F
5

Neither the Fahrenheit nor the Celsius scale provides an absolute standard because they
arbitrarily assign numerical values to reference points, such as the boiling point and
freezing point of water. The Kelvin scale, however, is an absolute temperature scale in
which the lowest possible temperature is absolute zero, or 0 K. On the Celsius scale this
is equivalent to –273.15oC; thus

K = oC + 273.15

Example 3. Report the temperatures in Examples 1 and 2 using the Kelvin scale.

Solution. For Example 1, the temperature is

K = 38.1oC + 273.15oC = 311.25 K

For Example 2, the temperature is

K = -4.5oC + 273.15oC = 268.65 K

Volume. The SI unit for volume is the cubic meter (m3), which is the volume of a cube
whose sides each measure 1 m in length. This volume is much larger than that routinely
used by chemists; thus, we will report volumes using the liter (L), where 1 L is equivalent
to 1 dm3 (a cube whose sides each measure 0.1 m or 10 cm). Another common unit for
volume is the milliliter (mL), where 1 mL is equivalent to 1 cm3 (a cube whose sides
each measure 1 cm). The prefix milli-, of course, means that 1 L contains 1000 mL.

Density. The density (d) of an object is the ratio of its mass (m) and its volume (V); thus

m
d=
V

Density is an example of an intensive property, by which we mean a property that doesn’t

depend on the amount of material. Consider, for example, a stick of chalk. If you break
the chalk into two pieces of unequal size the density of the larger and smaller pieces are
the same. The mass and volume of the larger piece, however, are greater than the mass

DePauw University – Department of Chemistry and Biochemistry Page 5

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

and volume of the smaller piece. Properties that depend on the amount of material, such
as mass and volume, are called extensive properties.

Example 4. A piece of gold has a mass of 237 g and occupies a volume of 12.3 cm3.
What is the density of gold?

Solution. The density of gold is

237 g 3
d= 3 = 19.3 g/cm
12.3 cm

Scientific Notation
Many of the numbers with which chemists work are very large or very small. For
example, in Module Two you will learn that a mole is a collection containing
602,200,000,000,000,000,000,000 objects (this is called Avogadro’s number). On the
other hand, an electron weighs but 0.000000000000000000000000000910 grams.
Obviously, expressing very large or very small numbers in decimal format is
cumbersome.

Using Scientific Notation to Express Large and Small Numbers. Instead of using decimal
notation to express large and small numbers, we will use scientific notation. In scientific
notation we write numbers using a format of

n
N × 10

where N is a number between 1 and 10, and n is a positive or negative exponent

indicating a power of 10. To write a number in scientific notation we move the decimal
point to the right or left until only one digit remains to the left of the decimal point (this is
N). The number of spaces we move the decimal point is n, which is positive if we move
the decimal point to the left and negative if we move it to the right.

Example 5. Express Avogadro’s number and the mass of an electron using scientific
notation.

Solution. Avogadro’s number is 602,200,000,000,000,000,000,000. Moving the decimal

point 23 places to the left gives us 6.022× 1023.

An electron weighs 0.000000000000000000000000000910 grams. Moving the decimal

point 28 places to the right gives us 9.10× 10-28 g.

DePauw University – Department of Chemistry and Biochemistry Page 6

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

As shown in Table 3, the prefixes used in the SI system are best expressed using
scientific notation.

Table 3. Prefixes Used in the SI System Showing Powers of 10

Prefix Symbol Meaning Prefix Symbol Meaning
12
Tera- T 10 Centi- c 10-2
Giga- G 109 Milli- m 10-3
Mega- M 106 Micro- μ 10-6
Kilo- k 103 Nano- n 10-9
Deci- d 10-1 Pico- p 10-12

A nanosecond, therefore, is conveniently expressed as 10-9 s, and a kilometer as 103 m.

Scientific Notation and Calculators. When using a calculator to complete a calculation

involving scientific notation, you need to be sure that you correctly enter the numbers;
check your calculator’s instruction manual if you are in doubt. Here is an example that
you can use to verify that you are correctly entering numbers into your calculator.

Example 6. Complete the following calculation: (5.3× 106) × (9.1× 10-10)

Solution. Correctly entering the numbers into your calculator will give you an answer of

(5.3× 106) × (9.1× 10-10) = 4.823× 10-3

Significant Figures
Consider the following rectangle. Find a ruler with a millimeter scale, measure the
rectangle’s width and length, and calculate its area, placing your results in the provided
spaces.

length = ________

width = __________

area = __________

How precisely did you make your measurements? Did you measure the length and width
to the nearest mm, reporting values such as 48 mm and 28 mm, respectively? Or, did you
estimate between the ruler’s millimeter markings, reporting values such as 48.4 mm and
27.9 mm, respectively? For the area, did you report your answer to the nearest 10’s
place, the nearest 1’s place, or to the nearest tenth or hundredth?

DePauw University – Department of Chemistry and Biochemistry Page 7

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Uncertainty in Measurements. The questions in the preceding paragraph may seem

unimportant (after all, why worry about the difference between reporting an area of 1344
cm2 vs. 1350 cm2). Nevertheless, these are crucial questions because they reflect a
scientist’s concern with precision. The last digit in a measurement is always an estimate
and has some uncertainty. In measuring the length of the rectangle, I noted that its length
was more than 48 mm. Estimating the length to be closer to 48 mm than 49 mm, I
rounded my answer to 48 mm. When you look at this result, however, you can say only
that the rectangle’s true length must be between 47 mm and 49 mm, and that I either
rounded up to 48 mm or rounded down to 48 mm. There is, therefore, an uncertainty in
my measurement that is best expressed as 48 mm ± 1 mm, and a relative uncertainty of

±1 mm
× 100 = ±2.1%
48 mm

By the same logic, reporting the length as 48.4 mm implies that the tenth’s place is
estimated with an absolute uncertainty of ±0.1mm, and a relative uncertainty of

±0.1 mm
× 100 = ±0.21%
48.4 mm

Estimating the length to the nearest 0.1 mm instead of the nearest millimeter decreases
the percent uncertainty by a factor of 10.

Example 7. Determine the relative uncertainty for a width of 28 mm. Repeat for a width
of 27.9 mm.

Solution. Dividing the uncertainty of each measurement by its value gives the relative
uncertainties as

±1 mm ±0.1 mm
× 100 = ±3.6% × 100 = ±0.36%
28 mm 27.9 mm

Why this concern for uncertainty in measurements? Uncertainty becomes important

because the result of a calculation cannot be more precise than the underlying
measurements. Thus, if we measure the length and width of our rectangle to the nearest
mm, its calculated area must have an uncertainty greater than 3.6% (the larger of the two
relative uncertainties). If, on the other hand, we measure the rectangle’s length and width
to the nearest 0.1 mm, its calculated area should have an uncertainty of approximately
0.36%. How does this compare to possible values for the area? Using a length of 48 mm
and a width of 28 mm gives the area, A, as

A = 48 mm × 28 mm = 1344 mm2

If we report this value as the answer, then the relative uncertainty is

DePauw University – Department of Chemistry and Biochemistry Page 8

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

±1 mm2
× 100 = ±0.074%
1344 mm2

which is significantly better than the minimum expected relative uncertainty of 3.6%.
Rounding the area to 1340 or 1300 gives relative uncertainties of, respectively
2
±10 mm
× 100 = ±0.75%
1340 mm2

±100 mm 2
× 100 = ±7.7%
1300 mm 2

The best answer, therefore, is 1300 mm2. If we take the length and width as 48.4 mm and
27.9 mm, respectively, then the calculated area is 1350 mm2 ± 10 mm2, giving a relative
uncertainty

±10 mm2
× 100 = ±0.74%
1350 mm2

that is consistent with the minimum expected relative uncertainty of 0.36%.

Determining the best answer for a calculation using the approach described above is
tedious. In fact, we’ve significantly simplified the discussion and a more complete
treatment of the “propagation of errors” is beyond the level of this course. Instead, we
will rely on a few simple rules to guide us in properly reporting results. The rules aren’t
perfect, but most of the time they yield the correct result and we won’t concern ourselves
with the few instances where the rules fail.

Significant Digits and Significant Figures. What do we mean by the terms significant
digit and significant figures? Basically, a significant digit is any number in a
measurement in which we can express confidence. This includes all digits known exactly
and the one digit (always the right-most digit) whose value is an estimate. For example,
in measuring the width of the rectangle as 27.9 mm, the 2 and 7 are known exactly but
the 9 is only an estimate. Each of these digits is significant, and the measurement of 27.9
mm is said to have three significant figures. The numbers 48 mm and 1344 mm2 have
two and four significant digits, respectively.

When is a Zero a Significant Digit? We must exercise care when determining the
number of significant figures in measurements containing one or more zeros. A zero is a
significant digit only it represents an exact measurement of the one estimated digit; thus,
the zeros in 2005 are significant and the number has four significant figures. A zero is
never a significant digit if it serves merely as a placeholder to show the decimal point’s
location; thus, the zero in 0.055 are not significant and the number has two significant
figures.

DePauw University – Department of Chemistry and Biochemistry Page 9

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Example 8. How many significant figures are in the following measurements?

503 mm 0.160 mm 150 mm 0.0115 mm

Solution. The measurement of 503 mm has 3 significant figures. Because the zero is
between two significant digits, it must be a significant digit.

The measurement of 0.160 mm has 3 significant figures. Because the zero is the right-
most digit, it is the one digit whose value is an estimate and, therefore, it must be a
significant digit. Note that the zero to the left of the decimal point is not significant as it
only serves to locate the decimal point.

The measurement of 150 mm has 2 or 3 significant figures. In this example, the zero’s
role is ambiguous. It isn’t clear if the measurement was estimated to the nearest ±1 mm,
or if it was estimated to the nearest ±10 mm, with the zero serving as a placeholder to
show the location of the decimal point (even though the decimal point isn’t shown). To
avoid confusion, it is best to express such numbers using scientific notation. A
measurement of 1.5× 102 mm has 2 significant figures and a measurement of 1.50× 102
mm has 3 significant figures.

The measurement of 0.0115 mm has 3 significant figures (not 4!). The zeros in this
example only serve to show the location of the decimal point. This becomes evident
when the measurement is written in scientific notation as 1.15× 10-2 mm.

Some numbers are exact and have an infinite number of significant figures. There are,
for example, exactly 12 inches in a foot. When determining the average of three
measurements

97 + 86 + 92
Exam Average = = 92
3

the number 3 is exact; thus we report the average to two significant figures, not one.

Calculations Using Significant Figures. As we learned when calculating the area of a

rectangle, the number of significant figures must be consistent with the uncertainty in the
measurements. As a general rule, mathematical operations involving addition and
subtraction are carried out to the last place that is significant for all measurements
included in the calculation. Thus, the sum of 135.621, 0.33, and 21.2163

135.621
0.33
21.2163
157.1673

DePauw University – Department of Chemistry and Biochemistry Page 10

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

is 157.17 since the last place that is significant for all three numbers (as shown by the
vertical line) is the hundredth’s place. Note that rounding to the correct number of
significant figures occurs only after completing the exact calculation.

When multiplying and dividing, the general rule is that the answer contains the same
number of significant figures as that measurement in the calculation having the fewest
significant figures. Thus,

22.91× 0.152
= 0.21361 ≈ 0.214
16.302

because 0.152, with three, has the fewest significant figures.

453 − 379 74
= = 0.6607 ≈ 0.66
112 112

When a calculation includes multiple operations, apply the rules for significant figures at
each step (but see discussion below about avoiding “round-off” errors). In this way you
will report your final answer to the correct number of significant figures.

Avoiding “Round-Off” Errors. To avoid "round-off" errors in calculations it is a good

idea to retain at least one extra significant figure throughout each step of the calculation.
Better yet, invest in a good scientific calculator that allows you to perform lengthy
calculations without recording intermediate values. When your calculation is complete,
round the final answer to the correct number of significant figures using the following
simple rules.

1. Retain the least significant figure if it and the digits that follow are less than
half way to the next higher digit; thus, rounding 12.442 to the nearest tenth
gives 12.4 since 0.442 is less than half way between 0.400 and 0.500.

2. Increase the least significant figure by 1 if it and the digits that follow are more
than half way to the next higher digit; thus, rounding 12.476 to the nearest
tenth gives 12.5 since 0.476 is more than half way between 0.400 and 0.500.

3. If the least significant figure and the digits that follow are exactly half way to
the next higher digit then round the least significant figure to the nearest even
number; thus, rounding 12.450 to the nearest tenth gives 12.4, while rounding
12.550 to the nearest tenth gives 12.6. Rounding in this manner prevents us
from introducing a bias by always rounding up or down.

DePauw University – Department of Chemistry and Biochemistry Page 11

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Example 9. Complete the following calculations, reporting answers to the correct

number of significant figures

8.314 × 298 0.250 × 0.01123 − 0.100 × 0.01927

314 - 273.15 = = =
96485 0.01123 + 0.01927

Solution. For the first problem, when adding or subtracting the last decimal place
common to both measurements determines the number of significant figures. As
highlighted below, this is the one’s place. The answer, therefore, is

314 - 273.15 = 40.85 ≈ 41

For the second problem, when multiplying or dividing the number of significant figures is
determined by the measurement with the fewest significant figures. As highlighted
below, the measurement with the fewest significant figures is 298, which has three
significant figures. The answer, therefore, is

8.314 × 298
= 0.0256783 ≈ 0.0257 = 2.57 ×10−2
96485

For the third problem, when mixing together several calculations, complete each step of
the calculation separately keeping at least one additional significant figure at each step
(see highlighting below). Round the answer to the correct number of significant figures
at the very end; thus

0.250 × 0.01123 − 0.100 × 0.01927 0.002808 − 0.001927 0.000881

= = = 0.0289 ≈ 0.029
0.01123 + 0.01927 0.03050 0.03050

Dimensional Analysis
Much of the work you will do in this course involves converting a measurement with one
unit into a result with a different unit. For example, in module 2 you will learn how to
determine the number of moles of carbon dioxide, CO2, in 23.6 g of CO2, and in module
5 you will determine how many grams of CO2 are produced when burning 0.551 g of
ethanol, C2H5O. These calculations are not, from a mathematical perspective, very
difficult. Nevertheless, it is easy to make simple mathematical mistakes, such as
multiplying instead of dividing, when working with unfamiliar units.

Dimensional analysis, which is also called the factor-label method, is an approach to

performing calculations that helps minimize errors. Consider this simple example - I am
6.0 feet tall. What is my in height inches? To convert between feet and inches I recall
that 1 foot is equivalent to 12 inches, which I can express as one of two possible ratios

DePauw University – Department of Chemistry and Biochemistry Page 12

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

1 ft 12 in
=1 or =1
12 in 1 ft

As noted, both ratios have a value of 1; such ratios are often called unit conversion
factors. To find the number of inches in 6.0 feet, I multiply 6.0 feet by the unit
conversion factor that has inches in the numerator and feet in the denominator. Because I
am multiplying by 1, the thing I am measuring (my height) is unchanged except for the
change in units.

12 in
6.0 f/t × = 72 in
1 f/t

The answer, of course, has two significant figures. The advantage to keeping track of
units in this way is that it prevents us from using the wrong unit conversion factor
between feet and inches. Using the wrong unit conversion factor

1 ft
6.0 ft × = 0.50 ft 2 in -1
12 in

gives an answer that doesn’t have the desired units (and that has no physical meaning!).

Example 10. A serving of plain M&M’s contains 27 g of sugar. How many pounds of
sugar is this?

Solution. A pound (lb) is equivalent to 453.6 g. To convert between grams of sugar and
pounds of sugar we use the unit conversion factor with grams in the numerator and
pounds in the denominator; thus

1 lb sugar
27 g sugar × = 6.0 × 10 −2 lb sugar
453.6 g sugar

Dimensional analysis also is useful for changing the prefix of a measurement reported in
SI units.

Example 11. The World Health Organization recommends that the maximum allowable
amount of arsenic in drinking water should be limited to 0.05 mg/L. Express this as
μg/L.

Solution. A microgram is 1 × 10-6 g and a milligram is 1 × 10-3 g; thus

0.05 mg 1 × 10 −3 g 1 μg 5.0 × 101 μg

× × =
L 1 mg 1 × 10 -6 g L

DePauw University – Department of Chemistry and Biochemistry Page 13

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

With practice you will find it easy to string together conversions between several units
and to handle units that are raised to a power.

Example 12. An average adult has 5.2 L of blood. Express this volume in m3.

Solution. Three unit factors are needed for this problem, one to convert from liters to
milliliters (1 L is 1000 mL), a second to convert from milliliters to cubic centimeters (1
mL is 1 cm3) , and a third to convert from cubic centimeters to cubic meters (1 m is 100
cm, thus 13 m3 is 1003 cm3; note that both the number and the unit are cubed).

1000 mL 1 cm3 ⎛ 1 m ⎞ 3
5.2 L × × ×⎜ ⎟ = 5.2 × 10 −3 m 3
L 1 mL ⎝ 100 cm ⎠

DePauw University – Department of Chemistry and Biochemistry Page 14

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Practice Problems
The following problems provide practice in meeting this module’s objectives. Answers
are provided on the last page. Be sure to seek assistance if you experience difficulty with
any of these problems. When you are ready, schedule an appointment for the module’s
exam.

Here are some useful relationships between units:

1 pound is 453.6 grams or 16 ounces

1 ton is 2000 pounds
1 mile is 1.609 kilometers or 5280 feet
1 inch is 2.54 centimeters
1 gallon is 3.7854 liters or 4 quarts
1 Å is 1× 10-8 cm or 1× 10-10 m

1. Ethanol boils at 78.5oC and freezes at -117oC. Convert these temperatures to the
Fahrenheit scale.

2. Mercury boils at 675oF and solidifies at -38.0oF. Convert these temperatures to the
Celsius scale.

3. Convert the temperatures in problem 1 to the Kelvin scale.

4. Convert the temperatures in problem 2 to the Kelvin scale.

5. Calculate the density, in g/cm3, of ethanol if 80.0 cm3 has a mass of 63.3 g.

6. Express the following numbers in scientific notation:

0.00000063

415

96485

0.0991

7. How many significant figures are there in the following measurements?

613.5 mi

30.6 mL

DePauw University – Department of Chemistry and Biochemistry Page 15

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

0.0000067 m

3.50× 108 cm

8. Complete the following calculations, reporting your results to the correct number of
significant figures.

0.0087 + 7.6× 10-3 =

536
=
4.2 × 102

(8.1× 10-5) × (4.8× 106) =

3.60 × (2.954 × 104 )

=
(7.50 × 104 ) × (128.92 − 18.5 + 21)

9. Express 3.69 m in kilometers, centimeters, and millimeters.

10. Express the mass of 32 g of oxygen in milligrams, kilograms, and pounds.

11. The color of light depends on its wavelength. The longest wavelength for visible
light, which is at the red end of the spectrum, is 7.8× 10-7 m. Express this length in
micrometers, nanometers, and angstroms.

12. What is the volume, in liters, of a tank that is 0.6 m long, 10.0 cm wide, and 50 mm
deep?

13. At Wimbledon, it isn’t unusual to have tennis balls zipping around with a speed of
43 m/s. Express this speed in miles/hr.

14. Mercury has a density of 13.6 g/cm3. What volume, in liters, will 3.00× 102 g of
mercury occupy?

15. An average person requires approximately 2.00 mg of riboflavin (vitamin B2) each
day. How many pounds of cheese would a person have to eat each day if this were
his or her only source of riboflavin? Assume that each gram of cheese contains
5.5 μg of riboflavin.

16. Each gram of seawater contains 65 μg of bromine. Assuming that you are able to
recover all the bromine from a sample of seawater, how many liters of seawater must
you process to obtain 1.0 lb of bromine? Assume that the density of seawater is
1.0 g/mL.

DePauw University – Department of Chemistry and Biochemistry Page 16

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

Answers to Practice Problems

1. 173oF and -179oF

2. 357oC and -38.9oC

3. 351.6 K and 156 K

4. 6.30 × 102 K and 234.2 K

5. 0.791 g/cm3

6. 6.3× 10-7

4.15× 102

9.6485× 104

9.91× 10-2

7. 4

8. 0.0163 or 1.63× 10-2

1.3

3.9× 102

1.08× 10-2

9. 3.69× 10-3 km, 369 cm, 3.69× 103 mm

10. 3.2× 104 mg, 3.2× 10-2 kg, 7.1× 10-2 lb

11. 0.78 μm, 7.8× 102 nm, 7.8× 103 Å

12. 3 L

DePauw University – Department of Chemistry and Biochemistry Page 17

 Module One – Units, Scientific Notation, Significant Figures and Dimensional Analysis

13. 96 mph

14. 2.21× 10-2 L

15. 0.80 lb/day

16. 7.0× 103 L

DePauw University – Department of Chemistry and Biochemistry Page 18