PROGRAMMABLE SAFETY CONVERTER

TPI t L 10 / µCtL10 ARDETEM SFERE

Designed according to the standard EN61508 in order to fulfill the requirements of a safety integrity level (SIL 2).

2
L
)

S I nd
ard EN
615
08

( Sta

Relay outputs (option R): 2 change-over

relays (5A/250 VAC on resistive load).
Features Isolation: input / outputs / supply.
• Universal power supply: • Safety:
20 to 270 Vac and 20 to 300 Vdc Checking of the current on the output loop
• Universal input: Self-diagnosis
Sensor rupture detection (according to input)
100mV, 1V, 10V, 300V, 20mA, Pt100 3 wire, Ni 100, Checking of the configuration data
thermocouple, resistance and potentiometer. Programming protected by code
Typical response time: 500 ms
• Test functions:
• Supply for 2-wire sensor - Simulation of the input measure
• 1 isolated analog output (A) programmable in 0-4-20mA - Simulation of the analog output
(active/passive) current or in 0-10V voltage. - Test for setting in safety position

Configuration Dimensions
Numbering of the 22.7(*)
130.4
Easy programming on front face with a micro-console or with the terminals:
PC software SuperVISION (ARDETEM) or MCvision (SFERE) connectors A/B/C 1234
119.9
Voltage presence Led
Programming with the Micro-console ON (green) or major error
indication (red)
This minaturised micro-console connected on the front face of the A B C
instruments allows: Relay 1 Location of the upper connectors
- the visualisation of the measure and the status of the analog and Relay 2
relay outputs,
- the visualisation and the modification of the programming,

µconsole
108.5

(protection by code) µconsole plug

- the teleloading of programming files for duplication to other
converters. PC connection plug
Programming by PC: SuperVISION/MCvision Location of the lower connectors
Programming software (Windows environment) allowing: D E F
- the storage of configurations as files which can be consulted, Numbering of the
modified, duplicated or loaded into the converters, terminals:
1234
- the edition and printing of files with or without having a converter connectors D/E/F
connected. (*) 26.5 with µconsole

Dimensions
Self-extinguishing case of black UL 94VO ABS. Coding
Mounting in switchbox: latching on symmetrical DIN rail.
Rack version: consult.
Plug-off connectors for screwed connectings Types:
Dimensions: 22.5x75x120 mm ARDETEM reference: TPItL10
with µconsole: 26.5x80x130 mm SFERE reference: µCtL10
To allow the inserting of the µconsole: mount Type TPI/µC tL10 AR
the instruments vertically (horizontal DIN rail)
leaving a 5mm space between each.
Operating T°: -5° to 50°C Outputs:
Storage T°: -20 to 70°C A analog I/U isolated
R 2 change-over relays
22.7 5 22.7 3 26.5 1 Power supply:
♦ according to the directive EMC 2004/108/CE.. 20 to 270 VAC and 20 to 300 Vdc
Compliance with standards:
Power draw : 3.5 W max. 6 VA max.
IEC 61000-6-4 on emissions, IEC 61000-6-2 immunity Dielectric withstanding : 2 kV-50Hz-1min.
(industrial environment)
Order example: For a converter with universal input + analog output +
IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-6 (level 3)
2 relays, request the reference TPItL10/µCtL10 AR
Sensitiveness < ±1% of the measure range

695 1 0 S O U C I E U E N J A R R E S T - Tél. : 33(0)4 72 31 31 30 Fax. : 33(0)4 72 31 31 31 CA CO2016/31

 Features Connectings
Inputs Upper connectors

Types of Measure range adjus- Permanent Intrinsic Console Input

Supply Inputs
INPUTS table from: overload error resolution impedance
mA∗ -2 to +22mA ±100mA 10 µA Max. drop A1 A2 A3 A4 B1 B2 B3 B4 C1 C2 C3 C4
0.9V
mV∗ -10 to +110mV ±1V 100 µV
+ 300V -
< ±0.1% of
- 0.1 to +1.1V ±50V the MR 1 mV
+ - 1V/10V
≥ 1MΩ AC ~ ~
V -1 to +11V 10 mV DC + - + - mV/mA
-30 to +330V ±600V 100 mV
Thermocouples∗ °C °F + - Tc
Standard IEC 581
J -160/1200 -256/2192
K -270/1370 -454/2498 - (2) Resistance
B 200/1820 392/3308 <±0.1%
R < 440Ω
R -50/1770 -58/3218 of the MR 0.1° or 1° ≥ 1 MΩ
S -50/1770 -58/3218 C or F R<2.2KΩ or 8.8KΩ
T -270/410 -454/770 (optional)
E -120/1000 -184/1832
N 0/1300 -32/2372
L -150/910 -238/1670 PT100 3 wire
W 1000/2300 1832/4172
W3 0/2480 32/4496 potentiometer
WRE5 0/2300 32/4172

Sensor Pt100Ω (1)∗ °C °F -

+ - 2-wire
3 wire, Stand.IEC
-200/850 -328/1562 -
<±0.1% 0.1° or 1° Current transmitter
751 (DIN 43760) of the MR C or F 250µA
Sensor Ni 100 3 -60/260 -76/500 -
wire (1)∗
Resistive sensors Calibers 0-440 Ω ∗ - <±0.1% of the 0,1Ω Current Lower connector
and 0-2.2 kΩ MR (0.5% for (400Ω) max.
(0-8.8 kΩ optional) 0-2 kΩ) 1Ω (2kΩ) 250µA Outputs
Potentiometer from 100Ω to 10 kΩ - Voltage Analog output Relay outputs
0,1% max.
100mV
D1 D2 D3 D4 E1 E2 E3 E4 F1 F2 F3 F4
Supply for 2-wire 24 VDC ±15% with protection from short-circuits.
sensor 25 mA max.
ON2 ON1
Special linearisation
programming
On inputs: mV, V, mA.
resistive sensors and potentiometer
- + - +
V mA
up to 20 points
0-10V 0-4/20mA OFF2 C2 OFF1 C1
Square root extraction On inputs mV, V or mA
active
Relay 2 Relay 1

CA CO2016/31 - A 12/16 - Any data in this documentation may be modified without prior notice.
MR Measure range Thermal drift <150ppm /°C

(1) Line resistance <25Ω ∗ Sensor break detection:

Lr !
Input mA (if down scale ≥
(2) Or 30 µV typical (60µV Max.) 3.5mA) Only 1 of the 2 analog outputs
CJC efficiency: 0.03°C/°C from Other inputs: a 12µA pulsed current can be activated at the same
-5 to 50°C allows the detection of line or 0-4/20mA passive time (outputs not indepedent).
sensor break. external source 30V max.

Outputs
Features related to the
Code
Types of
Features
safety
OUTPUTS
Current
active/ Current: Direct or reversed 0-4-20mA
A 1 analog Load impedance ≤ Lr 600Ω
passive Type of the instrument B
Voltage: Direct or reversed 0-10V
Voltage Load impedance ≥ Lr 5000Ω SIL (safety integrity level) 2

2 setpoints per relay, configurable on HFT (hardware fault tolerance) 0

the whole MR. Hysteresis programma-
R
2 change-over relays ble from 0 to 100%. Time delay pro- PFH (probability of failure per hour) 5E10 -8 /h
grammable from 0 to 25 sec. (250 VAC
5A or 30VDC 2A on resistive load) PFD (probability of failure on demand) 2,2E10 -4
For a Tproof of 1 year

Typical response time: 500 ms (for a variation from 0 to 90 % of SFF (safe failure fraction) 93%
the input signal)
Add 50 ms for the response time on the analog output
Only the output 4-20mA and the relays can be used in a safety
system.
Galvanic partition:
2kV-50Hz-1min. between supply, input, analog output, relay
outputs

y o u r r e p r e s e n t a t i ve

Route de Brindas
Parc d’activité d’Arbora N°2
69510 SOUCIEU EN JARREST
- FRANCE -
e-mail : [email protected] Tél. : 33 (0)4 72 31 31 30
http : //www.ardetem.com Fax. : 33 (0)4 72 31 31 31