SL series

BI-DIRECTIONAL KNIFE GATE VALVE SL SERIES

KGV SL SERIES FULLY LUGGED WITH KGV SL SERIES FULLY LUGGED WITH KGV SL SERIES FULLY LUGGED WITH
RISING STEM AND HANDWHEEL HANDWHEEL RS AND GEARBOX D/A PNEUMATIC ACTUATOR

The SL series is a long face-to-face knife gate slurry valve designed to handle abrasive slurries
from mineral extraction processes: iron ore, copper ore, gold ore, soda ash, phosphate, coal,
gypsum, cement and limestone. Equipped with two heavy duty, field replaceable vulcanized
rubber sleeves, ensures a bi-directional shutoff against heavy slurries.

GENERAL FEATURES TECHNICAL DATA

 Bi-directional shut off  Size range:

 Long face-to-face DN-50 (2”) to DN-600 (24”)
 Without external stuffing box
 Two split body arrangements, fully lugged-design  Working pressure:
 Two abrasive resistant vulcanized rubber sleeves, DN 50 to DN 300: 10 kg/cm2
replaceable without valve disassembly from the DN 350 to DN 400: 6 kg/cm2
pipeline DN 450 to DN 600: 4 kg/cm2
 Only rubber parts are in contact with the flowing slurry
 Unobstructed passage reduces pressure drop and  Flange ratings:
cavities, minimizing wear PN10, PN16 and ANSI B16.5 (class 150)
 Easy drive replacement Note: other flange drillings under request
 Coating:
APPLICATION FIELDS RAL 5017, 150 microns epoxy coated

 Directives:
 Mining and mineral extraction processes Pressure equipment directive 97/23/CE
 Mine dewatering DIR 2006/42/CE (MACHINES)
 Hydrocyclones
 Bulk handling
 General industry
 Etc

CYL reserves the right to change product design and specification without prior notice. 1
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

ASSEMBLY CONFIGURATION
OPERATION

Rising stem Gearbox Chain Wheel Quick closing lever

handwheel

Rising stem Electric Double acting Spring-return Oil hydraulic

coupling A actuator pneumatic actuator pneumatic actuator actuator
PLATES

Hand protections for

Plates automated valves
BODY

Fully lugged-between flanges

- Locking device
ACCESORIES

- Overriding actuator
- Mechanical limit switches
- Proximity limit switches
- Mechanical position indicator
- Solenoid valve
- Etc.

CYL reserves the right to change product design and specification without prior notice. 2
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

MATERIAL SPECIFICATION & PART LIST

No. DESCRIPTION MATERIAL

SS 316 (standard)
1 Gate
SS 316L, SS 316TI , DUPLEX 2205, SMO 254 (optional)
2 Body Cast iron – GJL250
3 Sleeves NATURAL RUBBER
4 Guides 1.0580
5 Grease nipple COMMERCIAL
6 Screws and nuts A-4
7 Packing guides PLASTIC
8 Plates 1.0580
- Stem SS 316
1.0401 (standard)
- Bearing
SS 316 (optional)
- Handwheel 1.0037
- Pneumatic act. Aluminium
- Hand-protection 1.0580

Figure 1. Exploded view of KGV SL series fully lugged

APPLICATION AND TEMPERATURE RANGE

SEAT MATERIALS
Min. Max.
Material APPLICATIONS
temperature (ºC) temperature (ºC)
NATURAL RUBBER -10 +70 Tear and abrasion resistant
*More details and other sealing materials under request.

CYL reserves the right to change product design and specification without prior notice. 3
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

DIMMENSIONAL DRAWINGS

Figure 2. KGV SL series fully lugged Figure 3. KGV SL series fully lugged Figure 4. KGV SL series fully lugged
rising stem & handwheel rising stem with handwheel & gearbox with d/a pneumatic actuator

Spindle
DN G±1 H L ØV L2 H2 L1 M Ø Cil S
thread
50 129 308 391 225 - - 433 177 100 1/4 “ G Tr20x4i
65 131 337 440 225 - - 482 197 100 1/4 “ G Tr20x4i
80 144 362 490 225 - - 529 219 100 1/4 “ G Tr20x4i
100 146 395 571 225 - - 588 245 125 3/8 “ G Tr20x4i
125 158 487 688 300 - - 719 290 160 3/8 “ G Tr24x5i
150 158 516 717 300 - - 765 307 160 3/8 “ G Tr24x5i
200 169 625 927 400 - - 931 375 190 1/2 “ G Tr28x5i
250 211 713 1065 400 - - 1107 463 250 1/2 “ G Tr28x5i
300 234 - - 400 1340 902 1309 536 250 1/2 “ G Tr28x5i
350 242 - - 500 1449 946 1445 576 300 1/2 “ G Tr40x7i
400 257 - - 500 1650 1957 1609 697 350 1/2 “ G Tr40x7i
450 260 - - 500 1751 1148 1833 787 400 1/2 “ G Tr50x8i
500 263 - - 500 1844 1191 1881 837 400 1/2 “ G Tr50x8i
600 285 - - 500 2101 1348 2205 937 400 1/2 “ G Tr50x8i

* Valves above DN-250 need to be operated with gearbox and handwheel.

* Data sheet for ØK & ØD stated in “flange drillings chapter”.

CYL reserves the right to change product design and specification without prior notice. 4
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

FLANGE DRILLINGS

FLANGE DRILLING - PN10

Bolting Arrangements PN-10 Knife Gate Valve

DN K D N T R
50 125 160 4 16 M-16
65 145 180 4 19 M-16
80 160 190 8 22 M-16
100 180 220 8 22 M-16
125 210 250 8 27 M-16
150 240 280 8 27 M-20
200 295 336 8 27 M-20
250 350 395 12 27 M-20
300 400 480 12 40 M-20
350 460 530 16 40 M-20
400 515 605 16 47 M-24
450 565 640 20 50 M-24
500 620 698 20 50 M-24
600 725 820 20 50 M-27

N: Nº of through holes

CYL reserves the right to change product design and specification without prior notice. 5
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

FLANGE DRILLING - ASA 150

Bolting Arrangements ASA 150 Knife Gate

Valve

DN K D N T R

50 120,60 160 4 16 5/8 “

65 139,70 180 4 19 5/8 “
80 152,40 190 4 22 5/8 “
100 190,50 220 8 22 5/8 “
125 215,90 250 8 27 3/4 “
150 241,30 280 8 27 3/4 “
200 298,40 336 8 27 3/4 “
250 361,90 395 12 27 7/8 “
300 431,80 480 12 40 7/8 “
350 476,20 530 12 40 1“
400 539,70 605 16 47 1“
450 577,80 640 16 50 1 1/8 “
500 635,00 698 20 50 1 1/8 “
600 749,30 820 20 55 1 1/4 “

N: Nº of through holes

CYL reserves the right to change product design and specification without prior notice. 6
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es
 SL series

ORDERING GUIDE

SERIES OPERATIONS MATERIAL DN SEAT BODY TYPE FLANGE

Example:
V 11 NR LW PN-10
SL SERIES
NR  NATURAL LW  Fully Lugged
V  Handwheel r.s 11  Cast iron PN-10
RUBBER (BETWEEN FLANGES)
VR  Handwheel r.s + Bevel Gearbox ASA 150

B  Iso top flange r.s. PN-16

BR  Iso top flange r.s. + Bevel Gearbox

M  Electric actuator r.s.

MR  Electric actuator r.s. + Bevel
Gearbox
P  Quick closing lever

N  D/A pneumatic actuator

SE  S/A pneumatic actuator

H  Oil hydraulic actuator

VCH  Chain wheel r.s.

VCHR  Chain wheel r.s. + Bevel
Gearbox

CYL reserves the right to change product design and specification without prior notice. 7
CYL KNIFE VALVES, S.L. Pol. Ind. Ibarluce, Pabellón B1/B2 20120 HERNANI (Spain) Tel: +34 943 333130
Fax: +34 943 332874 Email: [email protected] Web: www.cyl.es