0% found this document useful (0 votes)
217 views1 page

MiniDSP miniDAC8 1

The miniDAC8 is a pocket-sized 8-channel digital-to-analog converter board that uses an AKM AK4440 chip. It has 8 analog outputs with a maximum level of 2Vrms and requires only a single 5V power supply. It connects to miniDSP boards using I2S digital audio to add multichannel audio output capabilities. Custom projects can be easily built by stacking the miniDAC8 onto miniDSP boards like the miniSHARC or USBStreamer.

Uploaded by

Al
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
217 views1 page

MiniDSP miniDAC8 1

The miniDAC8 is a pocket-sized 8-channel digital-to-analog converter board that uses an AKM AK4440 chip. It has 8 analog outputs with a maximum level of 2Vrms and requires only a single 5V power supply. It connects to miniDSP boards using I2S digital audio to add multichannel audio output capabilities. Custom projects can be easily built by stacking the miniDAC8 onto miniDSP boards like the miniSHARC or USBStreamer.

Uploaded by

Al
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

miniDAC8

The miniDAC8 is a pocket sized I2S Digital Audio Converter board with up to
Features 8 analog outputs. The interface is powered by AKM single chipset AK4440
 8ch I2S DAC board and only requires a single 5VDC supply.
 Configuration via onboard MCU

Hardware
This 3.5” square board will stack on miniDSP’s standard expansion port to
 AKM AK4440
add multichannel audio to your project. Custom projects with miniDSP’s OEM
 24bit/8kHz ~192kHz
modules such as the miniSHARC or USBStreamer just got a lot easier!
 2Vrms output

 Add-on 8 x RCA output PCB

Power
 Single external 5VDC supply

Applications
 miniSHARC + miniDAC8

 USBStreamer/AVB-DG + miniDAC

 DIY/Custom product

TECHNICAL SPECIFICATIONS

Item Description
DAC chipset / Onboard MCU AK4440 / Microchip MCU for management

Analog Audio Max output level: 2Vrms unbalanced output


Dynamic range: 103dB
THD+N: 0.006%
Output impedance: 560Ohms
Digital audio input I2S digital audio format / AutoDetect of I2S stream 8k~192kHz

Connectors 2 x 30pin connectors for compatible boards (see updated list from product page)
1 x 20pin connector for 8channels RCA output board
2 x 12pin connector for I2S input (USBStreamer pin out)
SPDIF in: Pass through to feed miniSHARC board (buffered for 0.5V to TTL)
Accessories 8 x RCA add on board provided with module
Power supply 5VDC single supply / 400mA @ 5V
Dimensions (H x W x D) mm 75 x 75 x 10mm

20pin Header for RCA output

GND 1/2/4/6/8/10
12/14/16/18/20
3 Analog 1
5 Analog 2
7 Analog 3
9 Analog 4 Expansion
connector to
11 Analog 5 miniDSP
boards
13 Analog 6
15 Analog 7
17 Analog 8 SPDIF input
to the
miniSHARC
Single supply 5VDC
(sharing power for stack)

You might also like