Latching Solenoid

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

Solenoid Valves 3W Latch Solenoid Valve

S92-3 / S93-3
The DOROT S92-3 (2 wires) and S93-3 (3 wires) Latch 3-way solenoid valves are designed for electric
activation of automatic control valves of irrigation systems, which are activated by battery-operated
controllers.
The S92-3 / S93-3 Latch operator switches position due to short electric pulses. This feature extends the
battery life as the power consumption is minimal.
The Dorot S92-3 / S93-3 Latch operators are assembled on the Dorot solenoid base, forming an
independent control device.
The solenoid valve allows electric remote- control of On/Off, Pressure and Flow regulating valves, while
assuring the highest hydraulic performance, minimal power consumption and long service life.
The S92-3 / S93-3 Latch operators offer low sensitivity to dirt and are compatible to most battery-
powered controllers.

Applications
• On / Off activation of irrigation valves.
• Remote control of pressure and flow regulating valves.
• Actuation by battery- powered controller.

Benefits
• Low sensitivity to dirty water.
• Exceptional hydraulic performance (up to 10 bar with 1.5mm orifice)
• Requires very short pulse for activation.
• Requires low operating voltage.
• Wide range of operating voltages.
• High quality materials for maximum mechanical durability.
• Compatible with most pulse-signal controllers.
• Applicable with solar- charged controllers.
• High reliability and low maintenance.

Base connections:
2
Port C 1 2
3-way Command Vent pressure

14

Edition 06/2017
3W Latch Solenoid Valve Solenoid Valves

Technical Data
Operator type Wires Wire color Operator mark Cat. No.
S92-3
3W Latch 7.5-30 VDC 2 Red/ Black 7.5-30 VDC S35510820450002
Latch
S93-3
3W Latch 7.5-30 VDC 3 Red/ Black/ White 7.5-30 VDC S310110C0460001
Latch

Voltage: 7.5- 30 VDC (requires capacitor of 4700µf)


Connecting wires: 2 or 3 wires, cross-section - 0.32 mm2 length - 80 cm
Operating pressure range: 0-10 bar (up to 1.5mm orifice)
Assembly connection: 3/4” 20 UNEF-2A male threaded
Minimal pulse width: 15 ms
Maximal pulse width: 100 ms
Coil resistance: 9Ω (other resistances on request)
Protection: IP-66

Materials: Electric Connections:


Body Coated Steel White (+) Common
Seals NBR Red (-) Latch
Internals SST Black (-) Release

Dimensions:
81mm

44mm
1/8" BSP F

15

Edition 06/2017

You might also like