Scribd
Upload
498 views

Coban Commands

1. The document provides instructions for setting up and using various functions of a vehicle tracker device, including changing passwords, authorizing phone numbers, tracking location, monitoring sounds, setting location alarms, and remotely stopping a vehicle. 2. Location and status update alarms include low battery, external power loss, GPS signal loss, and geo-fence breaches. Speeding, ignition status, and remote engine stopping can also be set up and controlled. 3. Authorized phone numbers receive text alerts in some cases, and the tracker replies to confirmation texts when functions are activated, providing instructions.

Uploaded by

Evan Irungu
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
498 views

Coban Commands

1. The document provides instructions for setting up and using various functions of a vehicle tracker device, including changing passwords, authorizing phone numbers, tracking location, monitoring sounds, setting location alarms, and remotely stopping a vehicle. 2. Location and status update alarms include low battery, external power loss, GPS signal loss, and geo-fence breaches. Speeding, ignition status, and remote engine stopping can also be set up and controlled. 3. Authorized phone numbers receive text alerts in some cases, and the tracker replies to confirmation texts when functions are activated, providing instructions.

Uploaded by

Evan Irungu
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

1.

Change Password-password123456 888888


Reply - Password Ok
2. Call the tracker for 10 times continuously and get position correctly,
then it will make the cell phone number as the authorized number
automatically

3. Authorization Send SMS：“admin+password+space+cell phone


number- The other authorized numbers should be set by the first
authorized number. If the number is successfully authorized, the unit
will reply “admin ok!” in SMS.
4. Track with unlimited times upon time interval:-
fix030s***n+password
5. Voice Monitor- monitor+password
6. Storage upon times: Send SMS: “save030s005n+password
7 Unlimited storage：Send sms:”save030s***n+ password” to tracker
device, it will reply “save ok”.
.
Alarms
1.Low battery alarm- Send SMS “lowbattery+password+space+on”, it
will send SMS “low battery+latitude/longitude” to authorized numbers
2 times in total
15 minutes interval when voltage of battery is going to be about 3.55V.

2. External Power off alarm- Send “ extpower+password+space+on” to activate,


it will send SMS “power alarm+latitude/longtitude” to authorized numbers every 3
minutes when external power is cut off.
3. GPS blind Spot alert- This function deactivates as default, send SMS
“gpssignal+password+space+on”, it will send alert SMS “no gps+last valid
latitude/longitude before lost signal
4. SOS-Long Press the SOS button for 3 seconds（For model D, press button on
remote controller for 3 seconds）, the tracker device will send SMS “help
me!+lat./long.” to all the authorized numbers at interval of 3 minutes. It will stop
sending such as alert SMS when any authorized number reply
SMS “help me” to the tracker
5. Geo-fence- Set up a geo-fence for the tracker device to restrict its
movements within a district. The unit will send SMS to the authorized
numbers when it goes out of this district.
Set up: When the unit stays immobile in a place for 3-10 minutes, the
user can send
SMS“stockade+password+space+latitude,longitude;latitude,longitude”
to unit to set the restricted district. In case of breach, it will send SMS
“stockade!+ latitude & longitude” to the authorized numbers at interval
of 3 minutes.
Remark: The first latitude & longitude is coordinate of the top left
corner of the Geo-fence, while the second latitude & longitude is the
coordinate of the bottom right corner, it will alarm at interval of 3
minutes.

6. Over speed alarm- Set up: Send SMS “speed+password+space+080” to the unit
(suppose the speed is 80km/h), and it will reply “speed OK!”.

When the target moves exceeding 80km/h, the unit will send SMS
“speed+080!+ latitude & longitude” to the authorized numbers at interval of
3minutes.
7. ACC working alarm- To active this functions, send "ACC+password" to tracker, it
will reply "ACC ok". And tracker will send "ACC on+latitude & longitude" to
authorized numbers when detect ignition action, that means the vehicle has been
started; and tracker will send “ACC off+latitude & longitude" to authorized
numbers, that means ACC off.

6.20 Cut off the Oil and Power System (Option, for model C, D)

Send command “stop+password” to tracker, tracker will execute it


and reply “Stop engine Succeed”. And it will remain immobile state
until next command to resume.
Stop mode
Execute immediately: Send command “quickstop+password” to
tracker, it will reply “quickstop OK”. Then tracker will stop the car
immediately after “stop” command. 6.20.2.2Execute depends on
speed(Default mode): Send command “noquickstop+password” to
tracker, It will reply “noquickstop OK”, Then the tracker won’t stop
the car immediately after “stop” command, instead, it will reply “it
will be executed after speed less than
20KM/H”, and stop the car when the speed is less than 20KM/H
Resume the Oil and Power System

send “resume+password" to tracker, it will reply "Resume engine


succeed", that

means vehicle has resume the oil supply.

You might also like