Quick Start

Thank you for purchasing the Mobile WiFi. This Mobile

WiFi brings you a high speed wireless network connection.
This document will help you understand your Mobile WiFi so you can start using it right away.
Please read this document carefully before using your Mobile WiFi.
For detailed information about the functions and configurations of the Mobile WiFi, refer to
the online help on the web management page that comes with the Mobile WiFi.
For detailed instructions for logging in to the web management page, refer to "Logging In to
the Web Management Page ".

1
Getting to Know Your Mobile WiFi
Note:
The Mobile WiFi function descriptions and illustrations in this document are for your
reference only. The product you have purchased may vary.

Main Features
The Mobile WiFi mainly supports the following features:
 HSPA+: 21.6 Mbit/s DL / 5.76 Mbit/s UL
 Wi-Fi 1*1, 2.4G support
 WLAN: IEEE 802.11b/g/n
 1500 mAh Battery: Up to 4–6 hours working time. 300 hours standby time (depending on
the network)
 5 Wi-Fi users + 1 USB user
 HUAWEI Mobile WiFi app(Download from Apple Store or Google play Store)
2
Application Scenarios
Wi-Fi devices (such as smartphones, tablet computers, and game consoles) or computers can
all access the Internet through Mobile WiFi. The specific connection procedure depends on the
operating system of the Wi-Fi device or computer. Establish a connection according to your
device's specific instructions.

3
Scenario 1: Connecting multiple devices Scenario 2: Connecting a single device through
through Wi-Fi USB

4
Scenario 3: Connecting multiple devices through Wi-Fi and USB simultaneously

5
Appearance

1
2
7
3
4
5 8
6

 Power indicator
Blinks slowly: The Mobile WiFi enters the standby mode.
 Messages indicator
 Green: New message.
 Blinking green: Inbox full.

6
 Battery indicator
 Green: Sufficient battery.
 Blinking green: Charging the battery.
 Red: Low battery.
 Wi-Fi indicator
Green: Wi-Fi turned on.
 Micro USB port
 Signal indicator
 Green: Strong signal.
 Orange: Weak signal.
 Red: No signal.
 Lanyard hole
 Power button

7
SSID and Wireless Network Encryption Key
When a Wi-Fi device establishes a
connection to the Mobile WiFi for the first
time, you may need to enter the default
Service Set Identifier (SSID) and wireless
network encryption key.
The default SSID and encryption key are
printed on the Mobile WiFi label.
It is recommended that you can log in to the
web management page and change your
SSID and wireless network encryption key.

8
Getting Started
Installing
Install the SIM card and battery according to the illustration.
1 2 3 4
1
2

9
Charging the Battery
If the Mobile WiFi has not been used for a long time or if the battery is fully depleted, the
Mobile WiFi may not power on immediately after the charger is plugged in. Please charge the
battery for a while before attempting to power on the Mobile WiFi.
Method 1: Use the charger to charge the device
Note:
 Only use chargers compatible with the
Mobile WiFi and provided by a
designated manufacturer. Use of an
incompatible charger or one from an
unknown manufacturer may cause
the Mobile WiFi to malfunction, fail,
or could even cause a fire. Such use
voids all warranties, whether
expressed or implied, on the product.
 The charger is an optional accessory. If it is not included in the package, you may
10
 contact an authorized dealer to buy a charger compatible with the Mobile WiFi.
 The Mobile WiFi’s charger model is HW-050100XYW. X and Y represent letters or
numbers that vary by region. For details about the specific charger model, contact an
authorized dealer.
Method 2: Charge the device through a computer connection
Use the data cable provided with your device to connect the Mobile WiFi to the computer.

11
Connecting to the Internet via Wi-Fi
The Mobile WiFi's management parameters have been preset according to your operator's
requirements. You can quickly connect to the Internet by following these steps:
Step 1: Turn on the Mobile WiFi
Press and hold the button until the
indicator lights up, indicating that the Mobile
WiFi is turned on.
You can log in to the web management page
and turn the fast boot function on or off. This
function greatly reduces the Mobile WiFi's
boot-up time.
Note:
Press and hold the button to turn
off the Mobile WiFi.

12
Step 2: Establish a Wi-Fi connection (using a computer running the
Windows 7 operating system as an example)
1. Ensure that is displayed in green.
2. Select Start > Control Panel > Network and Internet > Network and Sharing Center >
Connect to a network.
Note:
Before establishing a Wi-Fi connection, ensure that the computer is equipped with a
wireless network adapter. If the computer indicates a wireless network connection, the
wireless network adapter can be used. Otherwise, verify that your wireless network
adapter is working properly.
3. Select the wireless network connection with the Mobile WiFi's SSID and click Connect.
Note:
 If the wireless network connection is encrypted, enter the correct wireless network
encryption key.
 The default SSID and encryption key are printed on the Mobile WiFi's label.

13
4. Wait a moment for the wireless network connection icon to appear in the system tray in
the lower right corner of the computer screen. The wireless network connection is then
established.
Step 3: Connect to the Internet
If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not
transmitted for a period of time, the Mobile WiFi will automatically disconnect from the
network connection.
Note:
You can log in to the web management page and enable or disable the automatic dialing
while roaming function. If this function is turned off, when the Mobile WiFi enters a
roaming network, it will automatically disconnect from the Internet connection that has
already been established. You will need to manually establish this network connection
again.

14
Logging In to the Web Management Page
1. Make sure the connection between the Mobile WiFi and the Wi-Fi device or computer is
working normally.
2. Open the browser, and enter http://192.168.1.1 in the address box.
3. Enter the user name and password to log in to the web management page.
Note:
 The default user name is admin.
 The default password is admin.

15
Battery Saving Mode
If the Mobile WiFi has been inactive for some time, the Mobile WiFi enters the standby mode,
the power indicator ( ) blinks slowly and the other indicators are off. Pressing the
button causes the indicator to light up.
When the Mobile WiFi is being powered only by the battery, you can choose to enable or
disable the automatic Wi-Fi turnoff function. If this function is enabled and if no Wi-Fi devices
access the Mobile WiFi for a period of time, the Wi-Fi turns off automatically. You can press the
button to turn the Wi-Fi on again.

Verifying the PIN

If the Mobile WiFi's network parameters have been correctly configured but you cannot access
the Internet after powering it on, PIN verification may be enabled. Log in to the web
management page and enter the PIN when prompted. To avoid entering the PIN every time
you power on the Mobile WiFi, disable PIN verification from the web management page.
The PIN/PUK is delivered with your SIM card. For more details, contact your service provider.

16
Connecting an Android Device to the Mobile WiFi Using a 2D
Barcode
1. Search for HUAWEI Mobile WiFi in
Google Play or HUAWEI App Center and
download the app to your Android
device.
2. Scan the 2D Barcode on the Mobile WiFi
rear label using the HUAWEI Mobile WiFi
App.

Your Android device will then connect to the

Mobile WiFi.

17
Restoring to Factory Settings
If you forget the user name, password, or SSID
you have set, you can restore the settings on the
web management page to their factory values. T
SE
RE
To do so, simply press and hold the RESET
button until the Mobile WiFi restarts. T
SE
RE

18
Example 1: Connecting to a Game Console (for example, PSP)
through Wi-Fi
1. On the PSP, turn on the WLAN.
2. Choose Settings > Network Settings.
3. Select Infrastructure Mode.
4. Select New Connection, and enter the
connection name.
5. Select Scan to search for wireless
networks. A list of access points will be
displayed on the screen.
6. Select the access point with the Mobile
WiFi's SSID, and press the ► button on
the PSP. Confirm the SSID, and enter the
correct wireless network encryption key.
7. Press the ► button to proceed to the
next step, and then press the X button to

19
 save settings.
8. Select Test Connection to test whether
the network connection is successful.
9. You can now open the browser and
access the network.

20
Example 2: Connecting to a Tablet Computer (for example, iPad)
through Wi-Fi
1. Touch Settings > WLAN to turn on WLAN.
2. The tablet computer automatically
searches for wireless connections and
displays a list of access points.
3. Select the access point with the Mobile
WiFi's SSID.
4. If required, enter the correct wireless
network encryption key, and tap Join.
(The lock icon indicates that the encryption
key is required to connect to this wireless
network.)
Note:
Wi-Fi devices, such as an iPhone, iPod touch, PS3 and NDSi, can all access the Internet
through the Mobile WiFi. For specific operations, refer to the Wi-Fi device's user manual.
21
Tips
When the Mobile WiFi is in use for an extended period of time, it will become warm and may
overheat. Should this happen, the Mobile WiFi will automatically close the network connection
and turn off to protect itself from damage. If this occurs, place the Mobile WiFi in a well
ventilated space to allow the heat to dissipate, then turn it on and continue to use it as normal.
If you are unable to use the Mobile WiFi as normal, try the following:
 Consult the online help on the web management page.
 Restart the Mobile WiFi.
 Restore the Mobile WiFi to the factory settings.
 Consult your operator.

Version: V100R001_02 Part Number: 31010SFH

22