SPOTO CCIE LAB RS V5.

0 H1 DIAG

【CCIE】SPOTO CCIE LAB RS V5.0 H1 DIAG

版本 V1.3
密级 开放 内部 机密
类型 讨论版 测试版 正式版

修订记录
修订日期 修订人 版本号 审核人 修订说明
2014-8-22 Dennis 1.0 Dennis 正式发布
2014-10-8 Dennis 1.2 Dennis Q2 要求选中 R15 设备
2014-4-15 Dennis 1.3 Dennis 更新考试的题目信息

SPOTO 全球 培训 ● 项目 ● 人才 1
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

1、Escalation from ACME Helpdesk

You are working in the ACME Corporate network team, and one of your

responsibilities is to provide second level support to the ACME helpdesk.

Alice, who is working at the headquarters helpdesk, received a complaint from a user

who is located in a specific VLAN. She started investigating the issue. Unfortunately,

she could not resolve it and she needs your help to quickly resolve the user’ s issue

Alice provides you with multiple documents and resources (see below).

PC can not get ip address and access network after a maintenance. During the

mantenance yesterday, SW3 has been replaced by a new switch and tier 1 engineer

copy the output of show run and paste to the new device. Tier 1 engineer think it may

be a spanning-tree or vtp problem. Choose where and what information you need to

troubleshoot the problem.

SPOTO 全球 培训 ● 项目 ● 人才 2
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

Q1：The material provided in which one of the best to help you determine fault？

所提供的材料中，哪一项对你判断故障最有帮助？

Indicate which command executed on which device provides the most

important information about the possible cause of this issue:

Device：SW3 Command line：show ip interface brief

Q2：Indicate which information collected on which device you require from the

helpdesk in order to confirm your suspicion.

需要help-desk工程师做哪一项来验证你的判断？

Collect on device: Host_1

Required information: what's the mac address of e0/0

SPOTO 全球 培训 ● 项目 ● 人才 3
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

思路：

SW3通过show ip interface brief 看到连接PC的接口是双down，通过查看SW3连接PC接口

的配置，发现配置了port security。查看接口下绑定的MAC地址信息。

Resources：

Support request

Escalation request

Network Topology Diagrams

Devices configuration

Console logs

SPOTO 全球 培训 ● 项目 ● 人才 4
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

2、Helping a colleague

SPOTO 全球 培训 ● 项目 ● 人才 5
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

SPOTO 全球 培训 ● 项目 ● 人才 6
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

You are working in ACME’s network operations center and one of your colleagues has

just deployed DMVPN between the headquarters and the remote sites.

Some documents and resources are provided below to help you understand, analyse

and recommend a solution to your colleague’ s issue.

Just the same as the DMVPN part in TS, logging message tells that there is a EIGRP

ADJ flapping on R17 R18 R19. Which device has problem?

What is the problem? （Network physics interface）

Q1：After considering all information provide. Point and click on the device that is

responsible for causing the reported symptoms.

R15

需求让你选中出问题的设备，这台设备是R15

点R15设备上的圆圈圈，圈圈变黑，题目下方提示红色的字变绿，说明这题已完成

SPOTO 全球 培训 ● 项目 ● 人才 7
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

Q2：

Recommend a possible solution to this issue as well as on which device it must be

configured:

Exculd the ip prefix of E0/0 into EIGRP

R15 把物理口移除 EIGRP 协议

战报：

Diag第2题会问你是Exclude R15上的哪个口,E0/0还是S4/0,我选的是E0/0 口,因为S4/0没ip。

Tunnel Source是E0/0

SPOTO 全球 培训 ● 项目 ● 人才 8
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

3、

You are working as a Network Consulting Engineer at PerfectNet.Ino.

One of your colleagues is working on a new deployment and requires some help from

you. He provides you with the below information.

问题大致如下

ACL 1 匹配的10.1网段，NAT调用，ping目标网络1.2.3.4，会丢包。

ACL 2 匹配的10.2 网段，NAT调用，ping目标网络1.2.3.4，不会丢包。

SPOTO 全球 培训 ● 项目 ● 人才 9
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

URPF has been configured. Link between PE1@CE is the main link. Link between

PE2@CE is a backup. After the main link failed, user inside can not access interface

through the backup link. Select steps to TS.

1、R1 looks up its RIB and select int e2/0 as the egress interface.

2、R1 translates the source ip address to its interface loopback 11.

3、R1 transmit the packet via int e2/0

4、Packets are received by R3 and are forwarded to the destination

5、the destination replies with an icmp echo reply.

6、The echo reply is routed via R2.

7、R2 transmit the echo reply to R1.

8、Unicast RPF on R1 drops the echo reply.

Packet area received by R3 and are forwarding to the destination 四

Packet area received by R2 and are forwarding to the destination

R1 looks up its RIB and selects interface E1/0 as the egress interface

R3 transmit the echo reply to R1

R2 and R3 drop the packet due to missing routing information for the destination

The destination does not reply with an ICMP echo reply

R2 transmit the Echo reply to R1 七

R1 transmit the packet via interface E1/0

SPOTO 全球 培训 ● 项目 ● 人才 10
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！
 SPOTO CCIE LAB RS V5.0 H1 DIAG

R2 and R3 drop the packet due to missing routing information for the source

R1 transmit the packet via interface E2/0 三

Unicast RPF on R1 drop the Echo reply 八

R1 translate the source ip address to its interface lo 12

R1 looks up its RIB and selects interface E2/0 as the egress interface 一

An access-list on R1 drop the echo reply

The destination replies with ICMP echo reply 五

The echo reply is routed via R3

The Echo reply is routed via R2 六

R1 translate the source IP address its interface loopback 11 二

Question 2

After considering all information provided, identify the root cause of the issue:

SPOTO 全球 培训 ● 项目 ● 人才 11
SPOTO IT 人才培训机构 ● IT 人才解决方案 ● CCIE 实验室 ● BOOTCAMP 全真 IT 项目实战
WEB: http://www.SPOTO.net BBS: （网络）http://bbs.SPOTO.net ●
以伙伴关系帮助客户成功，帮助员工成功，帮助合作伙伴成功。 —— 我们共创未来 ！