Scribd
Upload
989 views

Modulo IO DSQC 652

The DSQC 652 board provides 16 digital inputs and 16 digital outputs that can be connected via four connectors (X1, X2, X3, X4). It operates at 24VDC and communicates over DeviceNet using change-of-state or cyclic I/O messages. The board has status LEDs and supports automatically detecting the DeviceNet baud rate. Connection details are provided for each connector pin that maps the I/O channels.

Uploaded by

Paulo Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
989 views

Modulo IO DSQC 652

The DSQC 652 board provides 16 digital inputs and 16 digital outputs that can be connected via four connectors (X1, X2, X3, X4). It operates at 24VDC and communicates over DeviceNet using change-of-state or cyclic I/O messages. The board has status LEDs and supports automatically detecting the DeviceNet baud rate. Connection details are provided for each connector pin that maps the I/O channels.

Uploaded by

Paulo Castro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

6 Boards and units

6.2.3. DSQC 652, Digital I/O

6.2.3. DSQC 652, Digital I/O

Description

Illustration

xx0600002855

Parts

Item Description
A Status LEDs
X1 Digital outputs
See section Connector X1 on page 80 for connection table!
X2 Digital outputs
See Connector X2 on page 81for connection table!
X3 Digital inputs
See Connector X3 on page 81 for connection table!
X4 Digital inputs
See Connector X4 on page 82 for connection table!

3HAC020676-001 Revision: G 79
6 Boards and units
6.2.3. DSQC 652, Digital I/O

Item Description
X5 DeviceNet connector
See Connector X5 on page 82!

Facts, DSQC 652

Technical data
No. of inputs 16
No. of outputs 16
Supply voltage 24 VDC
Supply source 24 V I/O or separate external supply
SW connections Support for the following connections:
• Polled
• Change-Of-State
• Change-Of-State with acknowledge suppression
• Cyclic
• Cyclic with acknowledge suppression
For descriptions of the different types of I/O connections, see
I/O messages - connection types on page 11.
Baudrate Autodetect; the unit will detect the baud rate automatically.

NOTE!
When the master baud rate is changed disconnect the power
to the unit(s) before the system is restarted, reconnect the
power when the master is up and running.
This is required for the unit(s) to be able to establish a new
connection with the master.

Unit setup

Connector X1

xx0200000264

Unit function Signal name X1 pin


Optically isolated output Out ch 1 1
Optically isolated output Out ch 2 2
Optically isolated output Out ch 3 3
Optically isolated output Out ch 4 4

80 3HAC020676-001 Revision: G
6 Boards and units
6.2.3. DSQC 652, Digital I/O

Unit function Signal name X1 pin


Optically isolated output Out ch 5 5
Optically isolated output Out ch 6 6
Optically isolated output Out ch 7 7
Optically isolated output Out ch 8 8
Optically isolated output 0 V for outputs 9
Optically isolated output 24 V for outputs 10

Connector X2

xx0200000264

Unit function Signal name X2 pin


Optically isolated output Out ch 9 1
Optically isolated output Out ch 10 2
Optically isolated output Out ch 11 3
Optically isolated output Out ch 12 4
Optically isolated output Out ch 13 5
Optically isolated output Out ch 14 6
Optically isolated output Out ch 15 7
Optically isolated output Out ch 16 8
Optically isolated output 0 V for outputs 9
Optically isolated output 24 V for outputs 10

Connector X3

xx0200000264

Unit function Signal name X3 pin


Optically isolated input In ch 1 1
Optically isolated input In ch 2 2
Optically isolated input In ch 3 3
Optically isolated input In ch 4 4
Optically isolated input In ch 5 5
Optically isolated input In ch 6 6
Optically isolated input In ch 7 7
Optically isolated input In ch 8 8
Optically isolated input 0 V for inputs 9

3HAC020676-001 Revision: G 81
6 Boards and units
6.2.3. DSQC 652, Digital I/O

Unit function Signal name X3 pin


Optically isolated input Not used 10

Connector X4

xx0200000264

Unit function Signal name X4 pin


Optically isolated input In ch 9 1
Optically isolated input In ch 10 2
Optically isolated input In ch 11 3
Optically isolated input In ch 12 4
Optically isolated input In ch 13 5
Optically isolated input In ch 14 6
Optically isolated input In ch 15 7
Optically isolated input In ch 16 8
Optically isolated input 0 V for inputs 9
Optically isolated input Not used 10

Connector X5

xx0100000244

LEDs

82 3HAC020676-001 Revision: G
6 Boards and units
6.2.3. DSQC 652, Digital I/O

Input map

xx0300000613

Output map

en0400000716

3HAC020676-001 Revision: G 83

You might also like