Scribd Logo
Upload

Welcome to Scribd!

  • 300 views

    A620s80 81 Int69kf2 PDF

    Uploaded by

    MIGUEL ÁNGEL TOMÉ

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    A620s80 81 Int69kf2 PDF

    Uploaded by

    MIGUEL ÁNGEL TOMÉ
    300 views1 page

    Original Title

    a620s80-81-int69kf2.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    300 views1 page

    A620s80 81 Int69kf2 PDF

    Uploaded by

    MIGUEL ÁNGEL TOMÉ

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INT69 KF2® Diagnose

    INT69 KF2® Diagnose


    Application
    The motor protector INT69 KF2 Diagnose is a further development of
    the reliable KRIWAN motor protectors.
    The INT69 KF2 Diagnose automatically saves operational and error
    data in a non-volatile memory. This data can be retrieved on a PC and
    analysed for diagnosis. The full scope of the diagnosis is achieved by
    using a KRIWAN-specific AMS sensor.
    This motor protector is mainly employed on compressors which are
    qualified acc. to IEC/EN 60335.
    Functional description
    The temperature monitoring in the motor winding is done according to
    the static evaluation process; the motor is switched off immediately if
    the nominal response temperature of the built-in AMS or PTC sensors
    INT69 KF2 Diagnose
    is reached.
    L1 A short circuit at an AMS or PTC input also leads to a switch-off.
    L2 After expiration of the reset delay and elimination of the error or cool-
    L3
    N down, the compressor can be restarted.
    PE For operation in the specified manner, the supply voltage has to be on
    INT69 KF2 Diagnose DP
    permanently on the INT69 KF2 Diagnose.
    Technical specifications
    K1 T2 T1 S2 S1 M2 M1
    Supply voltage
    F1 K1 - 22 A 620 ... 115-230V ~ 50Hz ±10% 3VA
    M °C
    120-240V ~ 60Hz ±10% 3VA
    3 AC
    F2 HP - 31 A 620 ... 24V ~ 50/60Hz ±10% 3VA
    LP Permitted ambient temperature -30...+70°C
    Motor PTC
    Temperature measuring circuits
    - Type 1-2 AMS sensors in series
    Wiring diagram alternative 1-9 PTC acc. to
    DIN 44081, DIN 44082 in series
    76.5 35 - R25,total <1.8kΩ
    4.7

    - Rtrip, static 4.5kΩ ±20%


    - Rreset 2.75kΩ ±20%
    - Max. length connection line 30m
    Short circuit monitoring system
    PTC Typically <30Ω
    Reset delay
    81.5
    72.1

    - .. A 620 S80 30min ±5min


    - .. A 620 S81 60min ±5min

    Product group A
    Reset of reset delay Main reset >5 sec. only possible if
    there is no error current
    Relay
    Ø3.84 64.8 5.85 15.9 - Connection Refer to wiring diagram
    30.8 Max. 2.5A C300
    Dimensions in mm - Mechanical service life Approx. 1 million switching cycles
    The mounting, maintenance and operation are to be carried out Interface Diagnose port (DP)
    by an electrician. The valid European and national standards for Protection class acc. to EN 60529 IP00
    connecting electrical equipment and cooling installations have to Connection type 6.3mm flat connection
    be observed. Connected sensors and connection lines that Housing material PA glass-fibre-reinforced
    extend from the terminal box have to feature at least a basic insu- Mounting Screw mounted
    lation. Dimensions Refer to dimensions in mm
    Edition: 710.00430.1

    To determine the compressor running times, the INT69 KF2 Weight Approx. 200g
    Diagnose has to be the last protection unit before the compressor
    Check base IEC/EN 60335, IEC/EN 60730
    contacter (see wiring diagram). For that, the INT69 KF2 Diagnose
    EN 61000-6-2, EN 61000-6-3
    and the safety circuit have to be connected to the same phase of
    EN 61010-1
    the same supply network.
    Overvoltage category II
    Order data Pollution level 2
    INT69 KF2 Diagnose (AC 115-230V, 30min) 22 A 620 S80 Approval UL File no. E75899 cURus
    INT69 KF2 Diagnose (AC 115-230V, 60min) 22 A 620 S81 VDE certification no. 40022017
    INT69 KF2 Diagnose (AC 24V, 30min) 31 A 620 S80
    Accessories and application
    information see www.kriwan.com
    Technical changes reserved
    KRIWAN Industrie-Elektronik GmbH · Allmand 11 · D-74670 Forchtenberg · phone (+49) 7947 822 0 · fax (+49) 7947 1288 · e-mail: [email protected] · home: www.kriwan.com

    You might also like