Scribd
Upload
122 views2 pages

Aw0028 TDS en

AW0028 is a high performance, water-resistant PVA glue suitable for both indoor and outdoor woodworking applications. It meets the Type 1 standard for water resistance and has a viscosity of 3500-4200 cps. The glue dries within 6-8 hours and reaches optimal water resistance after 1 week, making it suitable for applications that will be exposed to varying humidity conditions.

Uploaded by

Saqib Nawaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
122 views2 pages

Aw0028 TDS en

AW0028 is a high performance, water-resistant PVA glue suitable for both indoor and outdoor woodworking applications. It meets the Type 1 standard for water resistance and has a viscosity of 3500-4200 cps. The glue dries within 6-8 hours and reaches optimal water resistance after 1 week, making it suitable for applications that will be exposed to varying humidity conditions.

Uploaded by

Saqib Nawaz
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AW0028 TYPE 1 PVA GLUE

PRODUCT DESCRIPTION PHYSICAL PROPERTIES


DURA PRO AW0028 meets the highest specifications for PVA Viscosity 3500-4200 cps (#5/20/25°C)
wood glues in accordance with ASTM D4317 TYPE 1 Solids 46-48 %
water-resistance standard. DURAPRO AW0028 is a high Colour beige
performance adhesive that is designed for both indoor and Odour 2.5 -3.5
outdoor woodworking. Ideal for woodworking applications that Specific Gravity 1.08
are intended to be frequently exposed to variable climate MFFT -2.5°C
conditions, and where high humidity resistance is essential. Bond Water Resistance Excellent (when dry)
is stronger than the wood. Open Time 5 minutes
VOC < 30g/L less water, < 5% by weight
PRODUCT FEATURES Minimum operating
• Water-resistant temperature 5°C
• Interior / exterior
• Marine grade GUIDELINES (AT 20°C & 50% RH)
Open time: 5-10 minutes
PREPARATION
Clamp time: 20-30 minutes
Shake well before using. Wood, adhesive and workshop
Drying time: 6-8 hours
temperatures should be above 10°C. All surfaces to be glued must
be clean and dry. Best bonds are obtained when moisture content
Cold press: 30 minutes at 50-150 PSI à 21°C ;
of wood ranges between 6% and 8%.
60 minutes at 50-150 PSI at 15°C
Hot press: 2-3 minutes at 100 PSI à 120°C
APPLICATION RF press: 1-2 minutes
Apply directly from the bottle or with a brush or a glue spreader.
Joints must be tight fitting. Apply glue generously to one surface. Spread rate: approx. 6 m²/L (240 p²/gallon)
Join the parts and clamp. When glue becomes translucent, bond
has been formed. Allow to dry before sanding. Not for continuous Curing time to reach type 1 water-resistance properties: 14 days
immersion or for use below the waterline. Recover glue joints at 23°C or 12 hours at 50°C
with a protective coating. Must dry 24 hours before exposing to
water or humidity. Optimal water resistance is achieved after 1 STORAGE
week. Shelf life is 18 months at room temperature in original unopened
container. Slight separation may occur (thin layer on top), this is an
CLEAN UP esthetic rather than technical problem. In this case, shake well
Clean hands and tools with warm soapy water before the product before applying. Product is freeze/thaw stable if frozen not lower
dries. If glue has hardened, use 50% solution of acetone and than -10°C. Consult your municipality to dispose container and
water for cleaning. On bonded materials, scrape off and sand left-over in accordance with environmental regulations.
dried excess.

ENVIRONMENT ORDERING INFORMATION


Size Units Units Units
VOC compliant for low emissions adhesives and sealants in place UPC per case per row per pallet
at the date of production ( less than 30g/L less water ; less than
5% by weight ). *This product contains no added urea- 058751281353 135 ml 12 432 2160
formaldehyde. The use of this product may contribute in 058751285184 518 ml 8 160 800
obtaining LEED credits. 05875128004 4L 4 48 144
058751280158 15 L 1 16 48
205 L 1 1 4

Dural, a division of Multibond, Inc. 550 Marshall avenue, Dorval, Quebec H9P 1C9
Telephone: 514-636-6230 • Direct line: 800-361-2340 • Fax: 514-631-7737 • E-Mail: [email protected]
www.duraproadhesives.com
AW0028 TYPE 1 PVA GLUE
ADDITIONAL INFORMATION
- Meets ASTM D-4317 Type 1 water-resistance specifications
- Meets ASTM D-5572 - wet use specifications for finger joints
- Meets CSA 0112.8M 1977 Type 1 standards
- Certified Ecologo UL 2762 by UL Environment

PRECAUTIONS
This product is not classified dangerous according to the
Consumer Chemicals and Containers Regulations (CCCR).
PRECAUTIONS: Keep out of reach of children. May cause slight
eye irritations. Avoid contact with eyes. FIRST AID TREATMENT:
If in eyes, rinse the affected areas with water. If swallowed, drink
water and call a doctor. Note to professional user: refer to Safety
Data Sheet (SDS) for more information.

WARRANTY
Surface conditions, product application, storage and transport are
beyond the manufacturer’s control; liability, if any, is limited to the
replacement of product ONLY.

DISCLAIMER
Our personnel is available to help purchasers obtain best results
from our products, and recommendations are based on tests and
information believed to be reliable. However, since we have no
control over the conditions under which our products are transport-
ed to, stored, handled, or used by purchasers, all recommendations
and sales are made on conditions that we will not be held liable for
any damages resulting from their use. No representative of ours has
any authority to waive or change this provision.

DATE
August 2017

Dural, a division of Multibond, Inc. 550 Marshall avenue, Dorval, Quebec H9P 1C9
Telephone: 514-636-6230 • Direct line: 800-361-2340 • Fax: 514-631-7737 • E-Mail: [email protected]
www.duraproadhesives.com

You might also like