Rocscience Computing Pile Resistance From Applied Soil Displacement For Slope Stability Analysis

Computing Pile Resistance from Applied
Soil Displacement for Slope Stability

Analysis
1 Pile Resistance for Slope Stability Analysis
For slope stability analysis using limit equilibrium methods, the displacement of moving soil
against the pile above the slip surface can be used to compute the lateral and axial resistance
against sliding through the principles of superposition. As shown in Figure 1-1, an assumed
uniform soil displacement is applied against the pile from the ground to the slip surface. The
direction of the applied soil displacement is tangent to the slip surface at the intersection point of
the pile and slip surface. The axial and lateral components of the applied displacement are used
to compute the axial and lateral resistances separately. The resultant pile resistance force at the
slip surface is used to satisfy force equilibrium for the selected limit equilibrium method.
𝛿𝛿𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠
𝛿𝛿𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠,𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙
𝛿𝛿𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠,𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎
𝛿𝛿𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠,𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙𝑙 𝛿𝛿𝑠𝑠𝑠𝑠𝑠𝑠𝑠𝑠,𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎𝑎
Figure 1-1: Slope Stability Analysis Considering Pile Resistance
The assumed displacement is the maximum allowable soil displacement based on design
tolerances. Allowing a larger maximum soil displacement increases the pile resistance against
sliding until the pile or soil reaches ultimate capacity. However, mobilizing ultimate resistance,
especially for laterally loaded piles, may require as great as 8 inches of soil movement according
to a study by Loehr and Brown (2008) [1] which is typically larger than most design tolerances.
2 Axial Resistance for Slope Stability Analysis

The axial resistance against axial displacement is calculated as the pile internal axial force at the
location of sliding. In RSPile, a uniform axial soil displacement profile can be applied as a
boundary condition from the ground to the sliding depth, as shown in Figure 2-1.
Applied Axial Displacement
Depth
Sliding Depth
z
Figure 2-1: Applied Uniform Axial Displacement Profile to calculate Axial Resistance
Alternatively, if a general soil displacement profile is used in RSPile, in order to simulate a

sliding depth, zero values should be entered below that location.
Original Axial Displacement Defined Axial Displacement
Depth
Sliding Depth
z
Figure 2-2: Applied General Axial Displacement Profile to calculate Axial Resistance
The internal axial force in the pile at the sliding depth in response to this loading is taken as the
pile axial resistance against the applied axial displacement. Note that no axial force is applied to
the pile head during this analysis since we are interested only in the resistance against axial
displacement. Applying an axial load will increase or decrease the internal forces, but in reality it
does not affect the axial resistance.
The process is repeated for a number of sliding depths to obtain an axial resistance to sliding
depth relationship where linear interpolation is used to obtain the pile resistance of any
intersecting slip surface.
3 Lateral Resistance for Slope Stability Analysis

Similarly, the lateral resistance against lateral displacement is calculated as the pile internal shear
force at the location of sliding. In RSPile, a uniform lateral soil displacement profile is applied as
a boundary condition from the ground to the sliding depth, as shown in Figure 3-1. More
information regarding loading by soil movement is provided in the laterally loaded piles theory
manual.
Applied Lateral Displacement
Depth
Sliding Depth
z
Figure 3-1: Applied Uniform Lateral Displacement Profile to calculate Lateral Resistance
Alternatively, if a general soil displacement profile is used in RSPile, in order to simulate a

sliding depth, zero values should be entered below that location.
Original Lateral Displacement Defined Lateral Displacement
Depth
Sliding Depth
z
Figure 3-2: Applied General Lateral Displacement Profile to calculate Lateral Resistance
The internal shear force in the pile at the sliding depth in response to this loading is taken as the
pile lateral resistance against the applied lateral displacement. For this analysis, pile head loading
conditions can be applied to resist the lateral soil forces. Note that the sign convention for the
pile head loading remains the same when working with Slide, regardless if the Slide analysis is
left to right or right to left.
The process is repeated for a number of sliding depths to obtain a lateral resistance to depth
relationship where linear interpolation is used to obtain the pile resistance of any intersecting slip
surface.
In the case of ultimate analysis, substantial soil movement is usually required in order to
mobilize transverse resistance in the pile. Rather than always running the analysis until failure of
the pile (which can result in unrealistic pile deflections up to 2 meters), it is assumed 0.3 meters
of soil movement is considered failure if transverse resistance in the pile has not been mobilized
to that point.
4 References
1. Loehr, E.J. and Brown, D.A. (2008). “A Method for Predicting Mobilization Resistance
for Micropiles Used in Slope Stabilization Applications”, A Report Prepared for the Joint
ADSC/DFI Micropile Committee.

Rocscience Computing Pile Resistance From Applied Soil Displacement For Slope Stability Analysis

Uploaded by

Copyright:

Available Formats

Rocscience Computing Pile Resistance From Applied Soil Displacement For Slope Stability Analysis

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Rocscience Computing Pile Resistance From Applied Soil Displacement For Slope Stability Analysis

Uploaded by

Copyright:

Available Formats

Computing Pile Resistance from Applied

Soil Displacement for Slope Stability

Figure 1-1: Slope Stability Analysis Considering Pile Resistance

2 Axial Resistance for Slope Stability Analysis

Applied Axial Displacement

Alternatively, if a general soil displacement profile is used in RSPile, in order to simulate a

Original Axial Displacement Defined Axial Displacement

3 Lateral Resistance for Slope Stability Analysis

Applied Lateral Displacement

Alternatively, if a general soil displacement profile is used in RSPile, in order to simulate a

You might also like