Scribd Logo
Upload

Welcome to Scribd!

  • 265 views

    WPS 1.1

    Uploaded by

    Juan Diego Carvajal
    This document is a Welding Procedure Specification (WPS) for single V-groove butt joints between ASTM A572 Grade C and ASTM A913 Grade C steel plates 3/8 inches thick using shielded metal arc welding (SMAW) with 4 passes of E8018-C3 electrode in the 4G position. The joint details specify a groove angle of 60-70 degrees, a root opening of 0-1/8 inches, and a root face of 0-1/8 inches. The procedure details a preheat and interpass temperature of greater than 10 degrees Celsius, travel speed of 7-9 inches per minute, and multiple passes per side.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    WPS 1.1

    Uploaded by

    Juan Diego Carvajal
    265 views1 page
    This document is a Welding Procedure Specification (WPS) for single V-groove butt joints between ASTM A572 Grade C and ASTM A913 Grade C steel plates 3/8 inches thick using shielded metal arc welding (SMAW) with 4 passes of E8018-C3 electrode in the 4G position. The joint details specify a groove angle of 60-70 degrees, a root opening of 0-1/8 inches, and a root face of 0-1/8 inches. The procedure details a preheat and interpass temperature of greater than 10 degrees Celsius, travel speed of 7-9 inches per minute, and multiple passes per side.

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document is a Welding Procedure Specification (WPS) for single V-groove butt joints between ASTM A572 Grade C and ASTM A913 Grade C steel plates 3/8 inches thick using shielded metal arc welding (SMAW) with 4 passes of E8018-C3 electrode in the 4G position. The joint details specify a groove angle of 60-70 degrees, a root opening of 0-1/8 inches, and a root face of 0-1/8 inches. The procedure details a preheat and interpass temperature of greater than 10 degrees Celsius, travel speed of 7-9 inches per minute, and multiple passes per side.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    265 views1 page

    WPS 1.1

    Uploaded by

    Juan Diego Carvajal
    This document is a Welding Procedure Specification (WPS) for single V-groove butt joints between ASTM A572 Grade C and ASTM A913 Grade C steel plates 3/8 inches thick using shielded metal arc welding (SMAW) with 4 passes of E8018-C3 electrode in the 4G position. The joint details specify a groove angle of 60-70 degrees, a root opening of 0-1/8 inches, and a root face of 0-1/8 inches. The procedure details a preheat and interpass temperature of greater than 10 degrees Celsius, travel speed of 7-9 inches per minute, and multiple passes per side.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    AWS D1.1/D1.

    1M:2015 ANNEX M

    Sample WPS Form (GTAW & SMAW)


    WELDING PROCEDURE SPECIFICATION (WPS)
    Universidad de Antioquia SW-01 0 04/10/2019
    Company Name WPS No. Rev. No. Date
    E.A. Torres Lopez 04/10/2019 Junta prec. B-U2 -
    Authorized by Date Supporting PQR(s) CVN Report

    Type or AWS BASE METAL


    BASE METALS Specification Grade Group No. THICKNESS As-Welded With PWHT
    Base Material ASTM A572 C III CJP Groove Welds 3/8 in >10°C
    Welded To ASTM A913 C III CJP Groove w/CVN - -
    Backing Material N.A N.A N.A PJP Groove Welds - -
    Other Fillet Welds - -
    DIAMETER - -

    JOINT DETAILS JOINT DETAILS (Sketch)


    Groove Type Single V Groove Butt Joint
    Groove Angle 60° -70°
    Root Opening 0 - 1/8 in
    Root Face 0 - 1/8 in
    Backgouging Sí
    Method Disco abrasivo

    POSTWELD HEAT TREATMENT


    Temperature N.A
    Time at Temperature -
    Other -

    PROCEDURE
    Weld Layer(s) 4
    Weld Pass(es) 4
    Process SMAW
    Type (Manual, Mechanized, etc.) MANUAL
    Position 4G
    Vertical Progression N.A
    Filler Metal (AWS Spec.) AWS A5.5
    AWS Classification E8018 C3
    Diameter 5/32 in
    Manufacturer/Trade Name -
    Shielding Gas Compos. (GTAW) N.A
    Flow Rate (GTAW) N.A
    Nozzle Size (GTAW) N.A
    Preheat Temperature >10°C
    Interpass Temperature >10°C
    Electrical Characteristics — — — — — — — —
    Electrode Diameter (GTAW) -
    Current Type & Polarity DCEP - AC
    Amps 135A-185A
    Volts -
    Cold or Hot Wire Feed (GTAW) -
    Travel Speed 7-9 in/min
    Maximum Heat Input -
    Technique — — — — — — — —
    Stringer or Weave Recto
    Multi or Single Pass (per side) Multiple
    Oscillation (GTAW Mech./Auto.) N.A
    Traverse Length -
    Traverse Speed -
    Dwell Time -
    Peening -
    Interpass Cleaning SÍ
    Other
    Form M-2 (See http://go.aws.org/D1forms)

    You might also like