Scribd
Upload
125 views4 pages

Engineering Drawing and Graphics - Basant Agrawal &amp C M Agrawal - Multiple Choice Questions

This document contains 20 multiple choice questions about engineering drawing and graphics. The questions cover topics such as hidden lines, dimensioning, types of angles, orthographic projections, scales, and geometric shapes. For each question, the possible multiple choice answers are listed along with the identified correct answer.

Uploaded by

Snehashish Mukerji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views4 pages

Engineering Drawing and Graphics - Basant Agrawal &amp C M Agrawal - Multiple Choice Questions

This document contains 20 multiple choice questions about engineering drawing and graphics. The questions cover topics such as hidden lines, dimensioning, types of angles, orthographic projections, scales, and geometric shapes. For each question, the possible multiple choice answers are listed along with the identified correct answer.

Uploaded by

Snehashish Mukerji
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

8/7/2014 Engi neering D rawing and Graphics - Basant Agr awal & C M Agr awal: Multiple choice questions

1. Hidden lines are drawn as

(a) das hed narrow lines


(b) das hed wide lines
(c) long-dashed dotted wide line
(d) long-dashed double dotted wide line

Ans: (a)

2. Line composed of closely and evenly spaced short dashes in a drawing represents

(a) v isible edges


(b) hidden edges
(c) hatching
(d) pitch circle of gears

Ans: (b)

3. Lettering on a drawing sheet should have

(a) all alphabets in capital letters


(b) all alphabets in small letters
(c) In a sentance only first alphabet in capital letter
(d) In a sentance only abbreviations are capital letter

Ans: (a)

4. T he line connecting a view to note is called

(a) dimension line


(b) projection line
(c) leader
(d) a rrowheads

Ans: (c)

5. The dimension figure for radius of a circle should be preceded by

(a) R
(b) CR
(c) SR
(d) RAD

Ans: (b)

6. The recommended method of dimensioning a sphere with diameter 80 mm is

(a) 80фS
(b) ф80S
(c) S80ф
(d) Sф80

Ans: (d)

7. Methods of arrangement of dimensions includes

http://engg-drawing.blogspot.in/2009/10/multiple-choice-questions.html 1/4
8/7/2014 Engi neering D rawing and Graphics - Basant Agr awal & C M Agr awal: Multiple choice questions

(a) Parallel, continuous and combined


(b) Perpendicular, parallel and combined
(c) Perpendicular, continuous and combined
(d) Perpendicular, parallel and continuous

Ans: (a)

8. S uperimposed dimensioning i s a s implified method of

(a) chain dimensioning


(b) parallel dimensioning
(c) combined dimensioning
(d) tabular dimensioning

Ans: (b)

9. A curve drawn for Boyle’s law (PV = constant) on a P-V chart has a characteristic shape of

(a) ellipse
(b) parabloa
(c) oblique hyperbola
(d) rectangular hyperbola

Ans: (d)

10. The profile of a gear teeth is in the form of

(a) parabola
(b) involute
(c) spiral
(d) helix

Ans: (b)

11. When two angles together mak e 90º, they are called

(a) obtuse angle


(b) reflex angle

(c) complementary angles


(d) supplementary angles

Ans: (c)

12. The included angle of a hexagon is

(a) 30º
(b) 60º
(c) 120º
(d) 150º

Ans: (c)

13. The curve g enerated by a point on the circumference of a circle, which rolls without slipping along outside of
another circle is known as

http://engg-drawing.blogspot.in/2009/10/multiple-choice-questions.html 2/4
8/7/2014 Engi neering D rawing and Graphics - Basant Agr awal & C M Agr awal: Multiple choice questions

(a) Hypocycloid
(b) Epicycloid
(c) Cycloid
(d) Trochoid

Ans: (b)

14. In orthographic projections, the rays are assumed to

(a) diverge from station point


(b) converge from station point
(c) be parallel
(d) None of these

Ans: (c)

15. If an object lies in third quadrant, its position with respect to reference planes will be

(a) infront of V.P, above H.P


(b) behind V.P., above H.P.
(c) behind V.P., below H.P.
(d) infront of V.P., below H.P.

Ans: (c)

16. If the Vertical Trace (V.T.) of a line lies 30 mm above reference line (XY), then its position will be

(a) 30 mm infront of V.P.


(b) 30 mm behind V.P.
(c) 30 mm above H.P.
(d) 30 mm below H.P.

Ans: (c)

17. When an object is cut by a section plane parallel to H.P and perpendicular to V.P, then the sectional view of
the object is obtained in

(a) top view

(b) front view


(c) left side view
(d) right side view

Ans: (a)

18. Which of the following object gives a circular section, when it is cut completely by a section plane (irrespective
of the angle of the section plane)

(a) Cylinder
(b) Sphere
(c) Cone
(d) Circular lamina

Ans: (b)

19. Comparative scale is a pair of scale having a common

http://engg-drawing.blogspot.in/2009/10/multiple-choice-questions.html 3/4
8/7/2014 Engi neering D rawing and Graphics - Basant Agr awal & C M Agr awal: Multiple choice questions

(a) units
(b) representative fraction
(c) length of scale
(d) least count

Ans: (b)

20. An angle can be set off and measured with the help of

(a) plane scale


(b) diagonal scale
(c) comparative scale
(d) S cale of chords

Ans: (d)

http://engg-drawing.blogspot.in/2009/10/multiple-choice-questions.html 4/4

You might also like