CCNA 1 Final Exam Answers 2019 (v5.1+v6.0) Introduction To Networks

IOS Commands Help Resources » Download Cisco Packet Tracer » IP Subnet Calculators » Donations
Search the site 
 CCNA v6 » CCNA v7 » IT Essentials 7.0 » CCNA Security v2.0 » CCNA Cyber Ops » CCNP » Linux »
CCNA v6 » CCNA v7 » IT Essentials 7.0 » CCNA Security v2.0 » CCNA Cyber Ops » CCNP » Linux »
IOS Commands Help Resources » Download Cisco Packet Tracer » IP Subnet Calculators » Donation Contact
CCNA 1 Final Exam Answers 2019 (v5.1+v6.0)

Introduction to Networks
 Mar 7, 2016 |  Last updated on: Dec 6, 2019 |  CCNA 1 Exam Answers, CCNA v6 |
 196 Comments
 Share  Tweet  Share  Pin it  Reddit
4.3 / 5 ( 173 votes )
How to find: Press “Ctrl + F” in the browser and fill in whatever wording is in the
question to find that question/answer.
NOTE: If you have the new question on this test, please comment Question
and Multiple-Choice list in form below this article. We will update answers
for you in the shortest time. Thank you! We truly value your contribution to
the website.
Version 6.0:
1. What is a characteristic of a fault tolerant network?
a network that protects confidential information from unauthorized access
a network that can expand quickly to support new users and applications without
impacting the performance of the service delivered to existing users
a network that supports a mechanism for managing congestion and ensuring
reliable delivery of content to all users
a network that recovers quickly when a failure occurs and depends on
redundancy to limit the impact of a failure*
Explain:
Fault tolerant networks limit the impact of a failure because the networks are built
in a way that allows for quick recovery when such a failure occurs. These networks
depend on multiple or redundant paths between the source and destination of a
message.
A scalable network can expand quickly to support new users and applications
without impacting the performance of the service being delivered to existing users.
Quality of service (QoS) is a mechanism for managing congestion and ensuring
reliable delivery of content to all users.
2. Three bank employees are using the corporate network. The first employee
uses a web browser to view a company web page in order to read some
announcements. The second employee accesses the corporate database to
perform some financial transactions. The third employee participates in an
important live audio conference with other corporate managers in branch
offices. If QoS is implemented on this network, what will be the priorities from
highest to lowest of the different data types?
financial transactions, audio conference, web page
audio conference, financial transactions, web page*
audio conference, web page, financial transactions
financial transactions, web page, audio conference
Explain:
QoS mechanisms enable the establishment of queue management strategies that
enforce priorities for different categories of application data. Thus, this queuing
enables voice data to have priority over transaction data, which has priority over
web data.
3. What is a benefit of using cloud computing in networking?

End users have the freedom to use personal tools to access information and
communicate across a business network.
Network capabilities are extended without requiring investment in new
infrastructure, personnel, or software.*
Technology is integrated into every-day appliances allowing them to interconnect
with other devices, making them more ‘smart’ or automated.
Home networking uses existing electrical wiring to connect devices to the network
wherever there is an electrical outlet, saving the cost of installing data cables.
Explain:
Cloud computing extends IT’s capabilities without requiring investment in new
infrastructure, training new personnel, or licensing new software. These services
are available on-demand and delivered economically to any device anywhere in
the world without compromising security or function. BYOD is about end users
having the freedom to use personal tools to access information and communicate
across a business or campus network. Smart home technology is integrated into
every-day appliances allowing them to interconnect with other devices, making
them more ‘smart’ or automated. Powerline networking is a trend for home
networking that uses existing electrical wiring to connect devices to the network
wherever there is an electrical outlet, saving the cost of installing data cables.
4. What is the function of the shell in an OS?

It interacts with the device hardware.
It interfaces between the users and the kernel.*
It provides dedicated firewall services.
It provides the intrusion protection services for the device.
Explain:
Most operating systems contain a shell and a kernel. The kernel interacts with the
hardware and the shell interfaces between the kernel and the users.
5. Which connection provides a secure CLI session with encryption to a Cisco

switch?
a console connection
an AUX connection
a Telnet connection
an SSH connection*
Explain:
A CLI session using Secure Shell (SSH) provides enhanced security because
SSH supports strong passwords and encryption during the transport of session
data. The other methods support authentication but not encryption.
6. A network technician is attempting to configure an interface by entering the

following command: SanJose(config)# ip address 192.168.2.1 255.255.255.0. The
command is rejected by the device. What is the reason for this?
The command is being entered from the wrong mode of operation.*
The command syntax is wrong.
The subnet mask information is incorrect.
The interface is shutdown and must be enabled before the switch will accept the
IP address.
Explain:
The wrong mode of operation is being used. The CLI prompt indicates that the
mode of operation is global configuration. IP addresses must be configured from
interface configuration mode, as indicated by the SanJose(config-if)# prompt.
7. An administrator uses the Ctrl-Shift-6 key combination on a switch after

issuing the ping command. What is the purpose of using these keystrokes?
to restart the ping process
to interrupt the ping process*
to exit to a different configuration mode
to allow the user to complete the command
Explain:
To interrupt an IOS process such as ping or traceroute, a user enters the Ctrl-Shift-
6 key combination. Tab completes the remainder of parameters or arguments
within a command. To exit from configuration mode to privileged mode use the
Ctrl-Z keystroke. CTRL-R will redisplay the line just typed, thus making it easier for
the user to press Enter and reissue the ping command.
8. Refer to the exhibit. A network administrator is configuring access control to

switch SW1. If the administrator uses a console connection to connect to the
switch, which password is needed to access user EXEC mode?
letmein
secretin
linevtyin
lineconin*
Explain:
Telnet accesses a network device through the virtual interface configured with the
line VTY command. The password configured under this is required to access the
user EXEC mode. The password configured under the line console 0 command is
required to gain entry through the console port, and the enable and enable secret
passwords are used to allow entry into the privileged EXEC mode.
9. On which switch interface would an administrator configure an IP address so
that the switch can be managed remotely?
FastEthernet0/1
VLAN 1*
vty 0
console 0
Explain:
Interface VLAN 1 is a virtual interface on a switch, called SVI (switch virtual
interface). Configuring an IP address on the default SVI, interface VLAN 1, will
allow a switch to be accessed remotely. The VTY line must also be configured to
allow remote access, but an IP address cannot be configured on this line.
10. What protocol is responsible for controlling the size of segments and the rate
at which segments are exchanged between a web client and a web server?
TCP*
IP
HTTP
Ethernet
Explain:
TCP is a Layer 4 protocol of the OSI model. TCP has several responsibilities in the
network communication process. It divides large messages into smaller segments
which are more efficient to send across the network. It also controls the size and
rate of segments exchanged between clients and servers.
11. What is an advantage to using a protocol that is defined by an open

standard?
A company can monopolize the market.
The protocol can only be run on equipment from a specific vendor.
An open standard protocol is not controlled or regulated by standards
organizations.
It encourages competition and promotes choices.*
Explain:
A monopoly by one company is not a good idea from a user point of view. If a
protocol can only be run on one brand, it makes it difficult to have mixed
equipment in a network. A proprietary protocol is not free to use. An open standard
protocol will in general be implemented by a wide range of vendors.
12. What are two benefits of using a layered network model? (Choose two.)
It assists in protocol design. *
It speeds up packet delivery.
It prevents designers from creating their own model.
It prevents technology in one layer from affecting other layers.*
It ensures a device at one layer can function at the next higher layer.
Explain:
Some vendors have developed their own reference models and protocols. Today,
if a device is to communicate on the Internet, the device must use the TCP/IP
model. The benefits of using a layered model are as follows:
assists in protocol design
fosters competition between vendors
prevents a technology that functions at one layer from affecting any other layer
provides a common language for describing network functionality
helps in visualizing the interaction between each layer and protocols between
each layer
13. Which two OSI model layers have the same functionality as two layers of the
TCP/IP model? (Choose two.)
data link
network*
physical
session
transport*
Explain:
The OSI transport layer is functionally equivalent to the TCP/IP transport layer,
and the OSI network layer is equivalent to the TCP/IP internet layer. The OSI data
link and physical layers together are equivalent to the TCP/IP network access
layer. The OSI session layer (with the presentation layer) is included within the
TCP/IP application layer.
14. Which name is assigned to the transport layer PDU?

bits
data
frame
packet
segment*
Explain:
Application data is passed down the protocol stack on its way to be transmitted
across the network media. During the process, various protocols add information
to it at each level. At each stage of the process, a PDU (protocol data unit) has a
different name to reflect its new functions. The PDUs are named according to the
protocols of the TCP/IP suite:
Data – The general term for the PDU used at the application layer.
Segment – transport layer PDU
Packet – network layer PDU
Frame – data link layer PDU
Bits – A physical layer PDU used when physically transmitting data over the
medium
15. A network engineer is measuring the transfer of bits across the company
backbone for a mission critical database application. The engineer notices that
the network throughput appears lower than the bandwidth expected. Which three
factors could influence the differences in throughput? (Choose three.)
the amount of traffic that is currently crossing the network*
the sophistication of the encapsulation method applied to the data
the type of traffic that is crossing the network*
the latency that is created by the number of network devices that the data is
crossing*
the bandwidth of the WAN connection to the Internet
the reliability of the gigabit Ethernet infrastructure of the backbone
Explain:
Throughput usually does not match the specified bandwidth of physical links due
to multiple factors. These factors include, the amount of traffic, type of traffic, and
latency created by the network devices the data has to cross.
16. A network administrator is troubleshooting connectivity issues on a server.

Using a tester, the administrator notices that the signals generated by the server
NIC are distorted and not usable. In which layer of the OSI model is the error
categorized?
presentation layer
network layer
physical layer*
data link layer
Explain:
The NIC has responsibilities in both Layer 1 and Layer 2. The NIC encodes the
frame as a series of signals that are transmitted onto the local media. This is the
responsibility of the physical layer of the OSI model. The signal could be in the
form of electrical, optical, or radio waves.
17. Which type of UTP cable is used to connect a PC to a switch port?

console
rollover
crossover
straight-through**
Explain:
A rollover cable is a Cisco proprietary cable used to connect to a router or switch
console port. A straight-through (also called patch) cable is usually used to
interconnect a host to a switch and a switch to a router. A crossover cable is used
to interconnect similar devices together, for example, between two switches, two
routers, and two hosts.
18. A network administrator is measuring the transfer of bits across the

company backbone for a mission critical financial application. The administrator
notices that the network throughput appears lower than the bandwidth expected.
Which three factors could influence the differences in throughput? (Choose
three.)
the type of traffic that is crossing the network *
crossing*
Explain:
Throughput usually does not match the specified bandwidth of physical links due
to multiple factors. These factors include, the amount of traffic, type of traffic, and
latency created by the network devices the data has to cross.
19. What is a characteristic of UTP cabling?

cancellation*
cladding
immunity to electrical hazards
woven copper braid or metallic foil
Explain:
Cladding and immunization from electrical hazards are characteristics for fiber-
optic cabling. A woven copper braid or metallic foil is used as a shield for the inner
coaxial cable conductor. Cancellation is a property of UTP cabling where two wires
are located adjacent to one another so each magnetic field cancels out the
adjacent magnetic field.
20. What are two characteristics of fiber-optic cable? (Choose two.)

It is not affected by EMI or RFI.*
Each pair of cables is wrapped in metallic foil.
It combines the technique of cancellation, shielding, and twisting to protect data.
It typically contains 4 pairs of fiber-optic wires.
It is more expensive than UTP cabling is.*
Explain:
Fiber-optic cabling supports higher bandwidth than UTP for longer distances. Fiber
is immune to EMI and RFI, but costs more, requires more skill to install, and
requires more safety precautions.
21. What is a characteristic of the LLC sublayer?

It provides the logical addressing required that identifies the device.
It provides delimitation of data according to the physical signaling requirements of
the medium.
It places information in the frame allowing multiple Layer 3 protocols to use
the same network interface and media.*
It defines software processes that provide services to the physical layer.
Explain:
The Logical Link Control (LLC) defines the software processes that provide
services to the network layer protocols. The information is placed by LLC in the
frame and identifies which network layer protocol is being used for the frame. This
information allows multiple Layer 3 protocols, such as IPv4 and IPv6, to utilize the
same network interface and media.
22. A network team is comparing physical WAN topologies for connecting

remote sites to a headquarters building. Which topology provides high
availability and connects some, but not all, remote sites?
mesh
partial mesh*
hub and spoke
point-to-point
Explain:
Partial mesh topologies provide high availability by interconnecting multiple remote
sites, but do not require a connection between all remote sites. A mesh topology
requires point-to-point links with every system being connected to every other
system. A point-to-point topology is where each device is connected to one other
device. A hub and spoke uses a central device in a star topology that connects to
other point-to-point devices.
23. What method is used to manage contention-based access on a wireless

network?
CSMA/CD
priority ordering
CSMA/CA*
token passing
Explain:
Carrier sense multiple access with collision avoidance (CSMA/CA) is used with
wireless networking technology to mediate media contention. Carrier sense
multiple access with collision detection (CSMA/CD) is used with wired Ethernet
technology to mediate media contention. Priority ordering and token passing are
not used (or not a method) for media access control.
24. What are the three primary functions provided by Layer 2 data
encapsulation? (Choose three.)
error correction through a collision detection method
session control using port numbers
data link layer addressing*
placement and removal of frames from the media
detection of errors through CRC calculations *
delimiting groups of bits into frames*
conversion of bits into data signals
Explain:
Through the framing process, delimiters are used to identify the start and end of
the sequence of bits that make up a frame. Data link layer addressing is added to
enable a frame to be delivered to a destination node. A cyclic redundancy check
(CRC) field is calculated on every bit and added to the frame. If the CRC value
contained in the arriving frame is the same as the one the receiving node creates,
the frame will be processed.
25. What will a host on an Ethernet network do if it receives a frame with a

destination MAC address that does not match its own MAC address?
It will discard the frame.*
It will forward the frame to the next host.
It will remove the frame from the media.
It will strip off the data-link frame to check the destination IP address.
Explain:
In an Ethernet network, each NIC in the network checks every arriving frame to
see if the destination MAC address in the frame matches its own MAC address. If
there is no match, the device discards the frame. If there is a match, the NIC
passes the frame up to the next OSI layer.
26. What are two examples of the cut-through switching method? (Choose two.)
store-and-forward switching
fast-forward switching*
CRC switching
fragment-free switching*
QOS switching
Explain:
Store-and forward switching accepts the entire frame and performs error checking
using CRC before forwarding the frame. Store-and-forward is often required for
QOS analysis. Fast-forward and fragment-free are both variations of the cut-
through switching method where only part of the frame is received before the
switch begins to forward it.
27. What are two actions performed by a Cisco switch? (Choose two.)
building a routing table that is based on the first IP address in the frame header
using the source MAC addresses of frames to build and maintain a MAC
address table*
forwarding frames with unknown destination IP addresses to the default gateway
utilizing the MAC address table to forward frames via the destination MAC
address*
examining the destination MAC address to add new entries to the MAC address
table
Explain:
Important actions that a switch performs are as follows:
When a frame comes in, the switch examines the Layer 2 source address to build
and maintain the Layer 2 MAC address table.
It examines the Layer 2 destination address to determine how to forward the
frame. When the destination address is in the MAC address table, then the frame
is sent out a particular port. When the address is unknown, the frame is sent to all
ports that have devices connected to that network.
28. Which frame forwarding method receives the entire frame and performs a
CRC check to detect errors before forwarding the frame?
cut-through switching
store-and-forward switching*
fragment-free switching
fast-forward switching
Explain:
Fast-forward and fragment-free switching are variations of cut-through switching,
which begins to forward the frame before the entire frame is received.
29. Refer to the exhibit. If host A sends an IP packet to host B, what will the
destination address be in the frame when it leaves host A?
DD:DD:DD:DD:DD:DD
172.168.10.99
CC:CC:CC:CC:CC:CC
172.168.10.65
BB:BB:BB:BB:BB:BB*
AA:AA:AA:AA:AA:AA
Explain:
When a host sends information to a distant network, the Layer 2 frame header will
contain a source and destination MAC address. The source address will be the
originating host device. The destination address will be the router interface that
connects to the same network. In the case of host A sending information to host B,
the source address is AA:AA:AA:AA:AA:AA and the destination address is the
MAC address assigned to the R2 Ethernet interface, BB:BB:BB:BB:BB:BB.
30. What addresses are mapped by ARP?

destination MAC address to a destination IPv4 address*
destination IPv4 address to the source MAC address
destination IPv4 address to the destination host name
destination MAC address to the source IPv4 address
Explain:
ARP, or the Address Resolution Protocol, works by mapping a destination MAC
address to a destination IPv4 address. The host knows the destination IPv4
address and uses ARP to resolve the corresponding destination MAC address.
31. What information is added during encapsulation at OSI Layer 3?

source and destination MAC
source and destination application protocol
source and destination port number
source and destination IP address*
Explain:
IP is a Layer 3 protocol. Layer 3 devices can open the Layer 3 header to inspect
the Layer 3 header which contains IP-related information including the source and
destination IP addresses.
32. What are two services provided by the OSI network layer? (Choose two.)
performing error detection
routing packets toward the destination *
encapsulating PDUs from the transport layer*
placement of frames on the media
collision detection
Explain:
The OSI network layer provides several services to allow communication between
devices:
addressing
encapsulation
routing
de-encapsulation
Error detection, placing frames on the media, and collision detection are all
functions of the data ink layer.
33. Refer to the exhibit. The network administrator for a small advertising
company has chosen to use the 192.168.5.96/27 network for internal LAN
addressing. As shown in the exhibit, a static IP address is assigned to the
company web server. However, the web server cannot access the Internet. The
administrator verifies that local workstations with IP addresses that are assigned
by a DHCP server can access the Internet, and the web server is able to ping
local workstations. Which component is incorrectly configured?
subnet mask
DNS address
host IP address
default gateway address*
Explain:
When a 255.255.255.224 subnet mask is used, the first three bits of the last octet
are part of the network portion for an IPv4 address in the subnet. For the
192.168.5.96/27 network, valid host addresses are 192.168.5.97 through
192.168.5.126. The default gateway address is for the Layer 3 device on the same
network and it must contain an IP address within the valid IP address range.
34. Why does a Layer 3 device perform the ANDing process on a destination IP
address and subnet mask?
to identify the broadcast address of the destination network
to identify the host address of the destination host
to identify faulty frames
to identify the network address of the destination network*
Explain:
ANDing allows us to identify the network address from the IP address and the
network mask.
35. What are two functions of NVRAM? (Choose two.)

to store the routing table
to retain contents when power is removed *
to store the startup configuration file*
to contain the running configuration file
to store the ARP table
Explain:
NVRAM is permanent memory storage, so the startup configuration file is
preserved even if the router loses power.
36. Refer to the exhibit. What will be the result of entering this configuration the
next time a network administrator connects a console cable to the router and no
additional commands have been entered?
The administrator will be required to enter Cisco123.

The administrator will be presented with the R1> prompt.*
Explain:
Until both the password password and the login commands are entered in console
line configuration mode, no password is required to gain access to enable mode.
37. What is the dotted decimal representation of the IPv4 address

11001011.00000000.01110001.11010011?
192.0.2.199
198.51.100.201
203.0.113.211*
209.165.201.223
Explain:
Each section (octet) contains eight binary digits. Each digit represents a specific
value (128, 64, 32, 16, 8, 4, 2, and 1). Everywhere there is a 1, the specific value
is relevant. Add all relevant values in a particular octet to obtain the decimal value.
For example binary 11001011 equals 203 in decimal.
38. What are three characteristics of multicast transmission? (Choose three.)
The source address of a multicast transmission is in the range of 224.0.0.0 to
224.0.0.255.
A single packet can be sent to a group of hosts. *
Multicast transmission can be used by routers to exchange routing
information. *
Routers will not forward multicast addresses in the range of 224.0.0.0 to
224.0.0.255.*
Computers use multicast transmission to request IPv4 addresses.
Multicast messages map lower layer addresses to upper layer addresses.
Explain:
Broadcast messages consist of single packets that are sent to all hosts on a
network segment. These types of messages are used to request IPv4 addresses,
and map upper layer addresses to lower layer addresses. A multicast transmission
is a single packet sent to a group of hosts and is used by routing protocols, such
as OSPF and RIPv2, to exchange routes. The address range 224.0.0.0 to
224.0.0.255 is reserved for link-local addresses to reach multicast groups on a
local network.
39. What are the three ranges of IP addresses that are reserved for internal
private use? (Choose three.)
10.0.0.0/8*
64.100.0.0/14
127.16.0.0/12
172.16.0.0/12*
192.31.7.0/24
192.168.0.0/16*
Explain:
The private IP address blocks that are used inside companies are as follows:
10.0.0.0 /8 (any address that starts with 10 in the first octet)
172.16.0.0 /12 (any address that starts with 172.16 in the first two octets through
172.31.255.255)
192.168.0.0 /16 (any address that starts with 192.168 in the first two octets)
40. What purpose does NAT64 serve in IPv6?

It converts IPv6 packets into IPv4 packets.*
It translates private IPv6 addresses into public IPv6 addresses.
It enables companies to use IPv6 unique local addresses in the network.
It converts regular IPv6 addresses into 64-bit addresses that can be used on the
Internet.
It converts the 48-bit MAC address into a 64-bit host address that can be used for
automatic host addressing.
Explain:
NAT64 is typically used in IPv6 when networks are being transitioned from IPv4 to
IPv6. It allows the IPv6 networks to connect to IPv4 networks (such as the
Internet), and works by translating the IPv6 packets into IPv4 packets.
41. What is the most compressed representation of the IPv6 address

2001:0000:0000:abcd:0000:0000:0000:0001?
2001:0:abcd::1
2001:0:0:abcd::1*
2001::abcd::1
2001:0000:abcd::1
2001::abcd:0:1
Explain:
The IPv6 address 2001:0000:0000:abcd:0000:0000:0000:0001 in its most
compressed format would be 2001:0:0:abcd::1. The first two hextets of zeros
would each compress to a single zero. The three consecutive hextets of zeros can
be compressed to a double colon ::. The three leading zeros in the last hextet can
be removed. The double colon :: can only be used once in an address.
42. Which range of link-local addresses can be assigned to an IPv6-enabled

interface?
FEC0::/10
FDEE::/7
FE80::/10*
FF00::/8
Explain:
Link-local addresses are in the range of FE80::/10 to FEBF::/10. The original IPv6
specification defined site-local addresses and used the prefix range FEC0::/10, but
these addresses were deprecated by the IETF in favor of unique local addresses.
FDEE::/7 is a unique local address because it is in the range of FC00::/7 to
FDFF::/7. IPv6 multicast addresses have the prefix FF00::/8.
43. Which three addresses are valid public addresses? (Choose three.)
198.133.219.17*
192.168.1.245
10.15.250.5
128.107.12.117*
192.15.301.240
64.104.78.227 *
44. Refer to the exhibit. On the basis of the output, which two statements about
network connectivity are correct? (Choose two.)
There is connectivity between this device and the device at 192.168.100.1.*

The connectivity between these two hosts allows for videoconferencing calls.
There are 4 hops b**etween this device and the device at 192.168.100.1.*
The average transmission time between the two hosts is 2 milliseconds.
This host does not have a default gateway configured.
Explain:
The output displays a successful Layer 3 connection between a host computer
and a host at 19.168.100.1. It can be determined that 4 hops exist between them
and the average transmission time is 1 milliseconds. Layer 3 connectivity does not
necessarily mean that an application can run between the hosts.
45. What type of IPv6 address is FE80::1?

loopback
link-local*
multicast
global unicast
Explain:
Link-local IPv6 addresses start with FE80::/10, which is any address from FE80::
to FEBF::. Link-local addresses are used extensively in IPv6 and allow directly
connected devices to communicate with each other on the link they share.
46. How many valid host addresses are available on an IPv4 subnet that is
configured with a /26 mask?
254
190
192
62*
64
Explain:
When a /26 mask is used, 6 bits are used as host bits. With 6 bits, 64 addresses
are possible, but one address is for the subnet number and one address is for a
broadcast. This leaves 62 addresses that can be assigned to network devices.
47. A site administrator has been told that a particular network at the site must
accommodate 126 hosts. Which subnet mask would be used that contains the
required number of host bits?
255.255.255.0
255.255.255.128*
255.255.255.224
255.255.255.240
Explain:
The subnet mask of 255.255.255.0 has 8 host bits. The mask of 255.255.255.128
results in 7 host bits. The mask of 255.255.255.224 has 5 host bits. Finally,
255.255.255.240 represents 4 host bits.
48. A network administrator wants to have the same subnet mask for three
subnetworks at a small site. The site has the following networks and numbers of
devices:
Subnetwork A: IP phones – 10 addresses
Subnetwork B: PCs – 8 addresses
Subnetwork C: Printers – 2 addresses
What single subnet mask would be appropriate to use for the three
subnetworks?
255.255.255.0
255.255.255.240*
255.255.255.248
255.255.255.252
Explain:
If the same mask is to be used, then the network with the most hosts must be
examined for number of hosts. Because this is 10 hosts, 4 host bits are needed.
The /28 or 255.255.255.240 subnet mask would be appropriate to use for these
networks.
49. How many hosts are addressable on a network that has a mask of
255.255.255.248?
2
6*
8
14
16
254
Explain:
The subnet mask of 255.255.255.248 is the same as /29. This means the network
portion of the address is 29 of the 32 bits in the address. Only 3 bits remain for
host bits. 2^3 = 8, but one of these addresses has to be used for the network
number and one address must be used as the broadcast address to reach all of
the hosts on this network. That leaves only 6 usable IP addresses that can be
assigned to hosts in this network. Don’t forget that the default gateway must be
one of these devices if this network is to communicate with other networks.
50. Which subnet would include the address 192.168.1.96 as a usable host
address?
192.168.1.64/26*
192.168.1.32/27
192.168.1.32/28
192.168.1.64/29
Explain:
For the subnet of 192.168.1.64/26, there are 6 bits for host addresses, yielding 64
possible addresses. However, the first and last subnets are the network and
broadcast addresses for this subnet. Therefore, the range of host addresses for
this subnet is 192.168.1.65 to 192.168.1.126. The other subnets do not contain the
address 192.168.1.96 as a valid host address.
51. What subnet mask is needed if an IPv4 network has 40 devices that need IP
addresses and address space is not to be wasted?
255.255.255.0
255.255.255.128
255.255.255.192*
255.255.255.224
255.255.255.240
Explain:
In order to accommodate 40 devices, 6 host bits are needed. With 6 bits, 64
addresses are possible, but one address is for the subnet number and one
address is for a broadcast. This leaves 62 addresses that can be assigned to
network devices. The mask associated with leaving 6 host bits for addressing is
255.255.255.192.
52. What are two characteristics shared by TCP and UDP? (Choose two.)
default window size
connectionless communication
port numbering*
3-way handshake
ability to to carry digitized voice
use of checksum*
Explain:
Both TCP and UDP use source and destination port numbers to distinguish
different data streams and to forward the right data segments to the right
applications. Error checking the header and data is done by both protocols by
using a checksum calculation to determine the integrity of the data that is received.
TCP is connection-oriented and uses a 3-way handshake to establish an initial
connection. TCP also uses window to regulate the amount of traffic sent before
receiving an acknowledgment. UDP is connectionless and is the best protocol for
carry digitized VoIP signals.
53. Why are port numbers included in the TCP header of a segment?
to indicate the correct router interface that should be used to forward a segment
to identify which switch ports should receive or forward the segment
to determine which Layer 3 protocol should be used to encapsulate the data
to enable a receiving host to forward the data to the appropriate
application*
to allow the receiving host to assemble the packet in the proper order
54. Refer to the exhibit. Consider the IP address of 192.168.10.0/24 that has been
assigned to a high school building. The largest network in this building has 100
devices. If 192.168.10.0 is the network number for the largest network, what
would be the network number for the next largest network, which has 40
devices?
192.168.10.0
192.168.10.128*
192.168.10.192
192.168.10.224
192.168.10.240
Explain:
The first thing to calculate is what IP addresses are used by the largest LAN.
Because the LAN has 100 hosts, 7 bits must be left for host bits. This would be a
subnet mask of 255.255.255.128 for the largest LAN (192.168.10.0/25). The IP
addresses range from 192.168.10.0 through 192.168.10.127. 192.168.10.0 is the
network number (all 0s in the host bits) and 192.168.10.127 is the broadcast for
this Ethernet LAN (all 1s in the host bits). The next available IP address is the next
network number – 192.168.10.128.
55. Which statement is true about variable-length subnet masking?

Each subnet is the same size.
The size of each subnet may be different, depending on requirements.*
Subnets may only be subnetted one additional time.
Bits are returned, rather than borrowed, to create additional subnets.
Explain:
In variable-length subnet masking, bits are borrowed to create subnets. Additional
bits may be borrowed to create additional subnets within the original subnets. This
may continue until there are no bits available to borrow.
56. In what two situations would UDP be the preferred transport protocol over
TCP? (Choose two.)
when applications need to guarantee that a packet arrives intact, in sequence,
and unduplicated
when a faster delivery mechanism is needed*
when delivery overhead is not an issue
when applications do not need to guarantee delivery of the data*
when destination port numbers are dynamic
Explain:
UDP is a stateless protocol, which means that neither device on either end of the
conversation must keep track of the conversation. As a stateless protocol, UDP is
used as the Layer 4 protocol for applications that need speedy (best-effort)
delivery. An example of such traffic is the transport of digitized voice or video.
57. What important information is added to the TCP/IP transport layer header to
ensure communication and connectivity with a remote network device?
timing and synchronization
destination and source port numbers*
destination and source physical addresses
destination and source logical network addresses
Explain:
The destination and source port numbers are used to identify exactly which
protocol and process is requesting or responding to a request.
58. What is the TCP mechanism used in congestion avoidance?

three-way handshake
socket pair
two-way handshake
sliding window*
Explain:
TCP uses windows to attempt to manage the rate of transmission to the maximum
flow that the network and destination device can support while minimizing loss and
retransmissions. When overwhelmed with data, the destination can send a request
to reduce the of the window. This congestion avoidance is called sliding windows.
59. Which scenario describes a function provided by the transport layer?

A student is using a classroom VoIP phone to call home. The unique identifier
burned into the phone is a transport layer address used to contact another network
device on the same network.
A student is playing a short web-based movie with sound. The movie and sound
are encoded within the transport layer header.
A student has two web browser windows open in order to access two web
sites. The transport layer ensures the correct web page is delivered to the
correct browser window.*
A corporate worker is accessing a web server located on a corporate network.
The transport layer formats the screen so the web page appears properly no matter
what device is being used to view the web site.
Explain:
The source and destination port numbers are used to identify the correct
application and window within that application.
60. A user opens three browsers on the same PC to access www.cisco.com to

search for certification course information. The Cisco web server sends a
datagram as a reply to the request from one of the web browsers. Which
information is used by the TCP/IP protocol stack in the PC to identify which of
the three web browsers should receive the reply?
the destination IP address
the destination port number*
the source IP address
the source port number
Explain:
Each web browser client application opens a randomly generated port number in
the range of the registered ports and uses this number as the source port number
in the datagram that it sends to a server. The server then uses this port number as
the destination port number in the reply datagram that it sends to the web browser.
The PC that is running the web browser application receives the datagram and
uses the destination port number that is contained in this datagram to identify the
client application.
61. What are two ways that TCP uses the sequence numbers in a segment?
(Choose two.)
to identify missing segments at the destination *
to reassemble the segments at the remote location*
to specify the order in which the segments travel from source to destination
to limit the number of segments that can be sent out of an interface at one time
to determine if the packet changed during transit
62. Which two tasks are functions of the presentation layer? (Choose two.)
compression*
addressing
encryption*
session control
authentication
Explain:
The presentation layer deals with common data format. Encryption, formatting,
and compression are some of the functions of the layer. Addressing occurs in the
network layer, session control occurs in the session layer, and authentication takes
place in the application or session layer.
63. Which three statements characterize UDP? (Choose three.)

UDP provides basic connectionless transport layer functions.*
UDP provides connection-oriented, fast transport of data at Layer 3.
UDP relies on application layer protocols for error detection. *
UDP is a low overhead protocol that does not provide sequencing or flow
control mechanisms.*
UDP relies on IP for error detection and recovery.
UDP provides sophisticated flow control mechanisms.
Explain:
UDP is a simple protocol that provides the basic transport layer functions. It has
much lower overhead than TCP because it is not connection-oriented and does
not offer the sophisticated retransmission, sequencing, and flow control
mechanisms that provide reliability.
64. What is a key characteristic of the peer-to-peer networking model?

wireless networking
social networking without the Internet
network printing using a print server
resource sharing without a dedicated server*
Explain:
The peer-to-peer (P2P) networking model allows data, printer, and resource
sharing without a dedicated server.
65. A technician can ping the IP address of the web server of a remote company
but cannot successfully ping the URL address of the same web server. Which
software utility can the technician use to diagnose the problem?
tracert
ipconfig
netstat
nslookup*
Explain:
Traceroute (tracert) is a utility that generates a list of hops that were successfully
reached along the path from source to destination.This list can provide important
verification and troubleshooting information. The ipconfig utility is used to display
the IP configuration settings on a Windows PC. The Netstat utility is used to
identify which active TCP connections are open and running on a networked host.
Nslookup is a utility that allows the user to manually query the name servers to
resolve a given host name. This utility can also be used to troubleshoot name
resolution issues and to verify the current status of the name servers.
66. Which domain name would be an example of a top-level domain?

www.cisco.com
cisco.com
.com*
root.cisco.com
Explain:
Top-level domains represent a country or type of organization, such as .com or
.edu.
67. A PC obtains its IP address from a DHCP server. If the PC is taken off the
network for repair, what happens to the IP address configuration?
The configuration is permanent and nothing changes.
The address lease is automatically renewed until the PC is returned.
The address is returned to the pool for reuse when the lease expires.*
The configuration is held by the server to be reissued when the PC is returned.
Explain:
When a DCHP address is issued to a host, it is for a specific lease time. Once the
lease expires, the address is returned to the DHCP pool.
68. When planning for network growth, where in the network should packet
captures take place to assess network traffic?
on as many different network segments as possible*
only at the edge of the network
between hosts and the default gateway
only on the busiest network segment
Explain:
Because some types of traffic will be only on specific network segments, packet
captures for analysis should be performed on as many segments as possible.
69. A wireless host needs to request an IP address. What protocol would be used
to process the request?
FTP
HTTP
DHCP*
ICMP
SNMP
Explain:
The DHCP protocol is used to request, issue, and manage IP addressing
information. CSMA/CD is the access method used with wired Ethernet. ICMP is
used to test connectivity. SNMP is used with network management and FTP is
used for file transfer.
70. Which example of malicious code would be classified as a Trojan horse?

malware that was written to look like a video game*
malware that requires manual user intervention to spread between systems
malware that attaches itself to a legitimate program and spreads to other
programs when launched
malware that can automatically spread from one system to another by exploiting a
vulnerability in the target
Explain:
A Trojan horse is malicious code that has been written specifically to look like a
legitimate program. This is in contrast to a virus, which simply attaches itself to an
actual legitimate program. Viruses require manual intervention from a user to
spread from one system to another, while a worm is able to spread automatically
between systems by exploiting vulnerabilities on those devices.
71. When applied to a router, which command would help mitigate brute-force
password attacks against the router?
exec-timeout 30
service password-encryption
banner motd $Max failed logins = 5$
login block-for 60 attempts 5 within 60*
Explain:
The login block-for command sets a limit on the maximum number of failed login
attempts allowed within a defined period of time. If this limit is exceeded, no further
logins are allowed for the specified period of time. This helps to mitigate brute-
force password cracking since it will significantly increase the amount of time
required to crack a password. The exec-timeout command specifies how long the
session can be idle before the user is disconnected. The service password-
encryption command encrypts the passwords in the running configuration. The
banner motd command displays a message to users who are logging in to the
device.
72. A network technician suspects that a particular network connection between

two Cisco switches is having a duplex mismatch. Which command would the
technician use to see the Layer 1 and Layer 2 details of a switch port?
show mac-address-table
show ip interface brief
show interfaces*
show running-config
Explain:
The show interfaces command can be used on both routers and switches to see
speed, duplex, media type, MAC address, port type, and other Layer 1/Layer 2-
related information.
73. Where are Cisco IOS debug output messages sent by default?
Syslog server
console line*
memory buffers
vty lines
Explain:
Debug messages, like other IOS log messages, are sent to the console line by
default. Sending these messages to the terminal lines requires the terminal
monitor command.
74. Match the description with the associated IOS mode. (not all options are
used.)
Question
Answer
user EXEC mode

limited number of basic monitoring commands
the first entrance intro the CLI of an IOS device
privileged EXEC mode
accessed by entering the enable command
identified by a prompt ending with the # character
global configuration mode
changes made affect the operation of the device as a whole
accessed by entering the configure terminal command
75. Refer to the exhibit. Match the packets with their destination IP address to
the exiting interfaces on the router. (Not all options are used.)
Answer
FastEthernet0/0 -> packets with destination of 172.17.6.15

Serial0/0/0 -> packets with destination of 172.17.8.20
76. Refer to the exhibit. An administrator is testing connectivity to a remote
device with the IP address 10.1.1.1. What does the output of this command
indicate?
Connectivity to the remote device was successful.
A router along the path did not have a route to the destination.*
A ping packet is being blocked by a security device along the path.
The connection timed out while waiting for a reply from the remote device.
Explain:
In the output of the ping command, an exclamation mark (!) indicates a response
was successfully received, a period (.) indicates that the connection timed out
while waiting for a reply, and the letter “U” indicates that a router along the path did
not have a route to the destination and sent an ICMP destination unreachable
message back to the source.
77. A user is unable to reach the web site when typing http://www.cisco.com in a
web browser, but can reach the same site by typing http://72.163.4.161. What is
the issue?
default gateway
DHCP
TCP/IP protocol stack
DNS *
Explain:
Domain Name Service (DNS) is used to translate a web address to an IP address.
The address of the DNS server is provided via DHCP to host computers.
78. A company is expanding its business to other countries. All branch offices
must remain connected to corporate headquarters at all times. Which network
technology is required to support this requirement?
LAN
MAN
WAN*
WLAN
Explain:
A local-area network (LAN) normally connects end users and network resources
over a limited geographic area using Ethernet technology. A wireless LAN (WLAN)
serves the same purpose as a LAN but uses wireless technologies. A
metropolitan-area network (MAN) spans a larger geographic area such as a city,
and a wide-area network (WAN) connects networks together over a large
geographic area. WANs can span cities, countries, or the globe.
79. A home user is looking for an ISP connection that provides high speed digital
transmission over regular phone lines. What ISP connection type should be
used?
DSL*
dial-up
satellite
cell modem
cable modem
80. How does quality of service help a network support a wide range of
applications and services?
by limiting the impact of a network failure
by allowing quick recovery from network failures
by providing mechanisms to manage congested network traffic*
by providing the ability for the network to grow to accommodate new users
Explain:
Quality of service (QoS), is a vital component of the architecture of a network. With
QoS, network administrators can provide applications with predictable and
measurable service guarantees through mechanisms that manage congested
network traffic.
81. What source IP address does a router use by default when the traceroute
command is issued?
the highest configured IP address on the router
the lowest configured IP address on the router
a loopback IP address
the IP address of the outbound interface*
Explain:
When sending an echo request message, a router will use the IP address of the
exit interface as the source IP address. This default behavior can be changed by
using an extended ping and specifying a specific source IP address.
82. After making configuration changes on a Cisco switch, a network

administrator issues a copy running-config startup-config command. What is the
result of issuing this command?
The new configuration will be stored in flash memory.
The new configuration will be loaded if the switch is restarted.*
The current IOS file will be replaced with the newly configured file.
The configuration changes will be removed and the original configuration will be
restored.
Explain:
With the copy running-config startup-config command, the content of the current
operating configuration replaces the startup configuration file stored in NVRAM.
The configuration file saved in NVRAM will be loaded when the device is restarted.
83. Refer to the exhibit. A network administrator is configuring access control to

switch SW1. If the administrator has already logged into a Telnet session on the
switch, which password is needed to access privileged EXEC mode?
letmein
secretin*
lineconin
linevtyin
Explain:
84. Match each item to the type of topology diagram on which it is typically
identified. (Not all options are used.)
Question
Answer
physical topology diagram

location of a desktop PC in a classroom
path of cables that connect rooms to wiring closets
logical topology diagram
IP address of a server
Explain:
A logical topology diagram typically depicts the IP addressing scheme and
groupings of devices and ports. A physical topology diagram shows how those
devices are connected to each other and the network, focusing on the physical
locations of intermediary devices, configured ports, and cabling.
85. Which connection provides a secure CLI session with encryption to a Cisco
network device?
a console connection
an AUX connection
a Telnet connection
an SSH connection*
Explain:
A CLI session using Secure Shell (SSH) provides enhanced security because
SSH supports strong passwords and encryption during the transport of session
data. The other methods support authentication but not encryption.
86. What function does pressing the Tab key have when entering a command in
IOS?
It aborts the current command and returns to configuration mode.
It exits configuration mode and returns to user EXEC mode.
It moves the cursor to the beginning of the next line.
It completes the remainder of a partially typed word in a command.*
Explain:
Pressing the Tab key after a command has been partially typed will cause the IOS
to complete the rest of the command.
87. What layer is responsible for routing messages through an internetwork in

the TCP/IP model?
internet*
transport
network access
session
Explain:
The TCP/IP model consists of four layers: application, transport, internet, and
network access. Of these four layers, it is the internet layer that is responsible for
routing messages. The session layer is not part of the TCP/IP model but is rather
part of the OSI model.
88. Which statement accurately describes a TCP/IP encapsulation process when

a PC is sending data to the network?
Data is sent from the internet layer to the network access layer.
Packets are sent from the network access layer to the transport layer.
Segments are sent from the transport layer to the internet layer.*
Frames are sent from the network access layer to the internet layer.
Explain:
When the data is traveling from the PC to the network, the transport layer sends
segments to the internet layer. The internet layer sends packets to the network
access layer, which creates frames and then converts the frames to bits. The bits
are released to the network media.
89. What unique address is embedded in an Ethernet NIC and used for
communication on an Ethernet network?
host address
IP address
MAC address*
network address
k layer
Explain:
The MAC address is a 48-bit address that is burned into every Ethernet NIC. Each
MAC address is unique throughout the world.
90. Which procedure is used to reduce the effect of crosstalk in copper cables?
requiring proper grounding connections
twisting opposing circuit wire pairs together*
wrapping the bundle of wires with metallic shielding
designing a cable infrastructure to avoid crosstalk interference
avoiding sharp bends during installation
Explain:
In copper cables, crosstalk is a disturbance caused by the electric or magnetic
fields of a signal on one wire interfering with the signal in an adjacent wire.
Twisting opposing circuit wire pairs together can effectively cancel the crosstalk.
The other options are effective measures to counter the negative effects of EMI
and RFI, but not crosstalk.
91. During the encapsulation process, what occurs at the data link layer for a PC
connected to an Ethernet network?
An IP address is added.
The logical address is added.
The physical address is added.*
The process port number is added.
Explain:
The Ethernet frame includes the source and destination physical address. The
trailer includes a CRC value in the Frame Check Sequence field to allow the
receiving device to determine if the frame has been changed (has errors) during
the transmission.
92. What are two characteristics of Ethernet MAC addresses? (Choose two.)
They are globally unique.*
They are routable on the Internet.
They are expressed as 12 hexadecimal digits.*
MAC addresses use a flexible hierarchical structure.
MAC addresses must be unique for both Ethernet and serial interfaces on a
device.
Explain:
An Ethernet MAC address is a 48-bit binary value expressed as 12 hexadecimal
digits. MAC addresses must be globally unique by design. MAC addresses are in
flat structure and thus they are not routable on the Internet. Serial interfaces do not
use MAC addresses.
93. If a device receives an Ethernet frame of 60 bytes, what will it do?

drop the frame*
process the frame as it is
send an error message to the sending device
add random data bytes to make it 64 bytes long and then forward it
Explain:
Ethernet standards define the minimum frame size as 64 bytes. A frame less than
64 bytes is considered a “collision fragment” or “runt frame” and is automatically
discarded by receiving devices.
94. Under which two circumstances will a switch flood a frame out of every port
except the port that the frame was received on? (Choose two.)
The frame has the broadcast address as the destination address. *
The destination address is unknown to the switch.*
The source address in the frame header is the broadcast address.
The source address in the frame is a multicast address.
The destination address in the frame is a known unicast address.
Explain:
A switch will flood a frame out of every port, except the one that the frame was
received from, under two circumstances. Either the frame has the broadcast
address as the destination address, or the destination address is unknown to the
switch.
95. Which switching method has the lowest level of latency?

cut-through
store-and-forward
fragment-free
fast-forward*
Explain:
Fast-forward switching begins to forward a frame after reading the destination
MAC address, resulting in the lowest latency. Fragment-free reads the first 64
bytes before forwarding. Store-and-forward has the highest latency because it
reads the entire frame before beginning to forward it. Both fragment-free and fast-
forward are types of cut-through switching.
96. Which two commands can be used on a Windows host to display the routing
table? (Choose two.)
netstat -s
route print*
show ip route
netstat -r*
tracert
Explain:
On a Windows host, the route print or netstat -r commands can be used to display
the host routing table. Both commands generate the same output. On a router, the
show ip route command is used to display the routing table. The netstat –
scommand is used to display per-protocol statistics. The tracert command is used
to display the path that a packet travels to its destination.
97. Which two functions are primary functions of a router? (Choose two.)
packet forwarding*
microsegmentation
domain name resolution
path selection*
flow control
98. What is the binary representation of 0xCA?
10111010
11010101
11001010*
11011010
Explain:
When converted, CA in hex is equivalent to 11011010 in binary. One way to do the
conversion is one nibble at a time, C = 1100 and A = 1010. Combine the two
nibbles gives 11001010.
99. At a minimum, which address is required on IPv6-enabled interfaces?

link-local*
unique local
site local
global unicast
Explain:
All IPv6 enabled interfaces must at minimum have a link-local address. Other IPv6
addresses can be assigned to the interface as required.
100. Which service provides dynamic global IPv6 addressing to end devices
without using a server that keeps a record of available IPv6 addresses?
stateful DHCPv6
SLAAC*
static IPv6 addressing
stateless DHCPv6
Explain:
Using stateless address autoconfiguration (SLAAC), a PC can solicit a router and
receive the prefix length of the network. From this information the PC can then
create its own IPv6 global unicast address.
101. What is the purpose of the command ping ::1?

It tests the internal configuration of an IPv6 host.*
It tests the broadcast capability of all hosts on the subnet.
It tests the multicast connectivity to all hosts on the subnet.
It tests the reachability of the default gateway for the network.
Explain:
The address ::1 is an IPv6 loopback address. Using the command ping ::1 tests
the internal IP stack to ensure that it is configured and functioning correctly. It does
not test reachability to any external device, nor does it confirm that IPv6 addresses
are properly configured on the host.
102. How many usable IP addresses are available on the 192.168.1.0/27 network?
256
254
62
30*
16
32
Explain:
A /27 mask is the same as 255.255.255.224. This leaves 5 host bits. With 5 host
bits, 32 IP addresses are possible, but one address represents the subnet number
and one address represents the broadcast address. Thus, 30 addresses can then
be used to assign to network devices.
103. What is the process of dividing a data stream into smaller pieces before
transmission?
segmentation*
encapsulation
encoding
flow control
Explain:
Data streams would cause significant network congestion if they were transmitted
as a single large stream of bits. To increase efficiency, data streams are
segmented into smaller more manageable pieces which are then transmitted over
the network.
104. When IPv4 addressing is manually configured on a web server, which

property of the IPv4 configuration identifies the network and host portion for an
IPv4 address?
DNS server address
subnet mask*
default gateway
DHCP server address
Explain:
There are several components that need to be entered when configuring IPv4 for
an end device:
IPv4 address – uniquely identifies an end device on the network
Subnet mask – determines the network address portion and host portion for an
IPv4 address
Default gateway – the IP address of the router interface used for communicating
with hosts in another network
DNS server address – the IP address of the Domain Name System (DNS) server
DHCP server address (if DHCP is used) is not configured manually on end
devices. It will be provided by a DHCP server when an end device requests an IP
address.
105. Which two roles can a computer assume in a peer-to-peer network where a
file is being shared between two computers? (Choose two.)
client*
master
server*
slave
transient
Explain:
In a peer-to-peer (P2P) network, two or more computers are connected and can
share resources without the use of a dedicated server. The computer that has the
file acts as a server for the device (the client) that requests the file.
106. Which two protocols operate at the highest layer of the TCP/IP protocol
stack? (Choose two.)
DNS*
Ethernet
IP
POP*
TCP
UDP
Explain:
The application layer is the top layer of the TCP/IP protocol stack. Application
layer protocols include HTTP, DNS, HTML, TFTP, POP, IMAP, FTP, and SMTP.
107. What is one difference between the client-server and peer-to-peer network
models?
Only in the client-server model can file transfers occur.
Every device in a peer-to-peer network can function as a client or a server.*
A peer-to-peer network transfers data faster than a transfer using a client-server
network.
A data transfer that uses a device serving in a client role requires that a dedicated
server be present.
Explain:
Data transfer speeds depend on a number of factors including the amount of
traffic, the quality of service imposed, and the network media. Transfer speeds are
not dependent on the network model type. File transfers can occur using the
client-server model or the peer-to-peer model. A data transfer between a device
acting in the client role and a device acting in the server role can occur in both
peer-to-peer and client-server networks.
108. What is the function of the HTTP GET message?

to request an HTML page from a web server*
to send error information from a web server to a web client
to upload content to a web server from a web client
to retrieve client email from an email server using TCP port 110
Explain:
There are three common HTTP message types:
GET – used by clients to request data from the web server
POST – used by clients to upload data to a web server
PUT – used by clients to upload data to a web server
109. Which networking model is being used when an author uploads one chapter
document to a file server of a book publisher?
peer-to-peer
master-slave
client/server*
point-to-point
Explain:
In the client/server network model, a network device assumes the role of server in
order to provide a particular service such as file transfer and storage. In the
client/server network model, a dedicated server does not have to be used, but if
one is present, the network model being used is the client/server model. In
contrast, a peer-to-peer network does not have a dedicated server.
110. What network service resolves the URL entered on a PC to the IP address of
the destination server?
DNS*
DHCP
FTP
SNMP
Explain:
When a client attempts to connect to a website, the destination URL must be
resolved to an IP address. To do this the client queries a Domain Name System
(DNS) server.
111. A network engineer is analyzing reports from a recently performed network

baseline. Which situation would depict a possible latency issue?
a change in the bandwidth according to the show interfaces output
a next-hop timeout from a traceroute
an increase in host-to-host ping response times*
a change in the amount of RAM according to the show version output
Explain:
While analyzing historical reports an administrator can compare host-to-host
timers from the ping command and depict possible latency issues.
112. Which firewall feature is used to ensure that packets coming into a network
are legitimate responses to requests initiated from internal hosts?
stateful packet inspection*
URL filtering
application filtering
packet filtering
Explain:
Stateful packet inspection on a firewall checks that incoming packets are actually
legitimate responses to requests originating from hosts inside the network. Packet
filtering can be used to permit or deny access to resources based on IP or MAC
address. Application filtering can permit or deny access based on port number.
URL filtering is used to permit or deny access based on URL or on keywords.
113. What is one indication that a Windows computer did not receive an IPv4
address from a DHCP server?
The computer cannot ping 127.0.0.1.
Windows displays a DHCP timeout message.
The computer receives an IP address that starts with 169.254*
The computer cannot ping other devices on the same network with IP addresses
in the 169.254.0.0/16 range.
Explain:
When a Windows PC cannot communicate with an IPv4 DHCP server, the
computer automatically assigns an IP address in the 169.254.0.0/16 range. Any
other device on the same network that receives an address in the same range is
reachable.
114. Which command can an administrator issue on a Cisco router to send

debug messages to the vty lines?
terminal monitor*
logging console
logging buffered
logging synchronous
Explain:
monitor command.
115. Fill in the blank.

During data communications, a host may need to send a single message to a specific
group of destination hosts simultaneously. This message is in the form of a Multicast
message.
116. A medium-sized business is researching available options for connecting to
the Internet. The company is looking for a high speed option with dedicated,
symmetric access. Which connection type should the company choose?
DSL
dialup
satellite
leased line*
cable modem
117. What is the purpose of having a converged network?
to provide high speed connectivity to all end devices
to make sure that all types of data packets will be treated equally
to achieve fault tolerance and high availability of data network infrastructure
devices
to reduce the cost of deploying and maintaining the communication
infrastructure*
Explain:
With the development of technology, companies can now consolidate disparate
networks onto one platform called a converged network. In a converged network,
voice, video, and data travel over the same network, thus eliminating the need to
create and maintain separate networks. This also reduces the costs associated
with providing and maintaining the communication network infrastructure.
118. What characteristic of a network enables it to quickly grow to support new
users and applications without impacting the performance of the service being
delivered to existing users?
reliability
scalability*
quality of service
accessibility
Explain:
Networks must be able to quickly grow to support new users and services, without
impacting existing users and services. This ability to grow is known as scalability.
119. After several configuration changes are made to a router, the copy running-
configuration startup-configuration command is issued. Where will the changes
be stored?
flash
ROM
NVRAM*
RAM
the configuration register
a TFTP server
120. Refer to the exhibit. From global configuration mode, an administrator is
attempting to create a message-of-the-day banner by using the command banner
motd V Authorized access only! Violators will be prosecuted! V When users log
in using Telnet, the banner does not appear correctly. What is the problem?
The banner message is too long.

The delimiting character appears in the banner message.*
The symbol “!” signals the end of a banner message.
Message-of-the-day banners will only appear when a user logs in through the
console port.
121. What are three characteristics of an SVI? (Choose three.)
It is designed as a security protocol to protect switch ports.
It is not associated with any physical interface on a switch.*
It is a special interface that allows connectivity by different types of media.
It is required to allow connectivity by any device at any location.
It provides a means to remotely manage a switch. *
It is associated with VLAN1 by default.*
Explain:
Switches have one or more switch virtual interfaces (SVIs). SVIs are created in
software since there is no physical hardware associated with them. Virtual
interfaces provide a means to remotely manage a switch over a network that is
using IP. Each switch comes with one SVI appearing in the default configuration
“out-of-the-box.” The default SVI interface is VLAN1.
122. A technician configures a switch with these commands:SwitchA(config)#

interface vlan 1
SwitchA(config-if)# ip address 192.168.1.1 255.255.255.0
SwitchA(config-if)# no shutdownWhat is the technician configuring?
Telnet access
SVI*
password encryption
physical switchport access
Explain:
For a switch to have an IP address, a switch virtual interface must be configured.
This allows the switch to be managed remotely over the network.
123. In computer communication, what is the purpose of message encoding?

to convert information to the appropriate form for transmission*
to interpret information
to break large messages into smaller frames
to negotiate correct timing for successful communication
Explain:
Before a message is sent across a network it must first be encoded. Encoding is
the process of converting the data message into another format suitable for
transmission across the physical medium. Each bit of the message is encoded into
a pattern of sounds, light waves, or electrical impulses depending on the network
media over which the bits are transmitted. The destination host receives and
decodes the signals in order to interpret the message.
124. What is a characteristic of multicast messages?

They are sent to a select group of hosts.*
They must be acknowledged.
They are sent to a single destination.
They are sent to all hosts on a network.
Explain:
Multicast is a one-to-many type of communication. Multicast messages are
addressed to a specific multicast group.
125. A large corporation has modified its network to allow users to access
network resources from their personal laptops and smart phones. Which
networking trend does this describe?
bring your own device*
video conferencing
online collaboration
cloud computing
126. True or False.
A dedicated server is not needed when implementing a peer-to-peer network.
true*
false
127. Which term refers to a network that provides secure access to the corporate
offices by suppliers, customers and collaborators?
Internet
intranet
extranet*
extendednet
Explain:
The term Internet refers to the worldwide collection of connected networks.
Intranet refers to a private connection of LANs and WANS that belong to an
organization and is designed to be accessible to the members of the organization,
employees, or others with authorization. Extranets provide secure and safe access
to suppliers, customers, and collaborators. Extendednet is not a type of network.
128. What subnet mask is required to support 512 subnets on networks
172.28.0.0/16?
255.255.240.0
255.255.255.224
255.255.255.240
255.255.255.128*
255.255.252.0
129. A DHCP server is used to IP addresses dynamically to the hosts on a
network. The address pool is configured with 10.29.244.0/25. There are 19
printers on this network that need to use reserve static IP addresses from the
pool. How many IP address in the pool are left to be assign to other hosts?
210
60
109
107*
146
Version 5:
130. What is a function of the data link layer?
provides the formatting of data
provides for the exchange of data over a common local media*
provides end-to-end delivery of data between hosts
provides delivery of data between two applications
131. Which communication tool allows real-time collaboration?
wiki
e-mail
weblog
instant messaging*
132. A host is accessing a Web server on a remote network. Which three
functions are performed by intermediary network devices during this
conversation? (Choose three.)
regenerating data signals*
acting as a client or a server
providing a channel over which messages travel
applying security settings to control the flow of data *
notifying other devices when errors occur*
serving as the source or destination of the messages
133. Refer to the exhibit. From which location did this router load the IOS?
flash memory*
NVRAM?
RAM
ROM
a TFTP server?
134. Refer to the exhibit. Which action will be successful?
PC1 can send a ping to 192.168.1.1?.

PC2 can send a ping to 192.168.1.1.*
Port numbers ranging from 0 to 1023 are considered to be Well Known ports.
ISOC, IANA, EIA, and IEEE represent standards organizations which help to promote
and maintain an open Internet.
137. Refer to the exhibit. An administrator is trying to configure the switch but
receives the error message that is displayed in the exhibit. What is the problem?
The entire command, configure terminal, must be used.

The administrator is already in global configuration mode.
The administrator must first enter privileged EXEC mode before issuing the
command.*
The administrator must connect via the console port to access global
configuration mode.
138. A company is expanding its business to other countries. All branch offices
must remain connected to corporate headquarters at all times. Which network
technology is required to support this requirement?
LAN
MAN
WAN*
WLAN
Explain:
A local-area network (LAN) normally connects end users and network resources
over a limited geographic area using Ethernet technology. A wireless LAN (WLAN)
serves the same purpose as a LAN but uses wireless technologies. A
metropolitan-area network (MAN) spans a larger geographic area such as a city,
and a wide-area network (WAN) connects networks together over a large
geographic area. WANs can span cities, countries, or the globe.
139. A network administrator is upgrading a small business network to give high

priority to real-time applications traffic. What two types of network services is
the network administrator trying to accommodate? (Choose two.)
SNMP
instant messaging
voice*
FTP
video*
140. Match the situation with the appropriate use of network media.
Question
Answer
CCNA 1 v6.0 Final Exam Answers 2019-2020
Copper Cables
horizontal cabling structure
desktop PCs in an enterprise office
Fiber Optic
backbone cabling in an enterprise
long-haul networks
Wireless
guest access in a coffee shop
waiting rooms in a hospital
Explain:
Copper Cables – horizontal cabling structure and desktop PCs in offices in an
enterprise
Fiber optic – backbone cabling in an enterprise and long-haul networks
Wireless – coffee shops and waiting rooms in a hospital
141. Which IPv4 address can be pinged to test the internal TCP/IP operation of a
host?
0.0.0.0
0.0.0.1
127.0.0.1*
192.168.1.1
255.255.255.255
142. What three application layer protocols are part of the TCP/IP protocol suite?
(Choose three.)
ARP
DHCP*
DNS*
FTP*
NAT
PPP
143. Which two protocols function at the internet layer? (Choose two)
ARP
BOOTP
ICMP*
IP*
PPP
144. Which publicly available resources describe protocols, processes, and
technologies for the Internet but do not give implementation details?
Request for Comments*
IRTF research papers
protocol models
IEEE standards
145. Which address on a PC does not change, even if the PC is moved to a
different network?
IP address
default gateway address
MAC address*
logical address
146. What is the protocol that is used to discover a physical address from a
known logical address and what message type does it use?
ARP, multicast
DNS, unicast
DNS, broadcast
ARP, broadcast*
PING, multicast
PING, broadcast
147. What will happen if the default gateway address is incorrectly configured on
a host?
The host cannot communicate with other hosts in the local network.
The switch will not forward packets initiated by the host.
The host will have to use ARP to determine the correct address of the default
gateway.
The host cannot communicate with hosts in other networks.*
A ping from the host to 127.0.0.1 would not be successful.
148. What is an important function of the physical layer of the OSI model?
It accepts frames from the physical media.
It encapsulates upper layer data into frames.
It defines the media access method performed by the hardware interface.
It encodes frames into electrical, optical, or radio wave signals.*
149. Which two statements describe the characteristics of fiber-optic cabling?
(Choose two.)
Fiber-optic cabling does not conduct electricity.*
Fiber-optic cabling has high signal loss.
Fiber-optic cabling is primarily used as backbone cabling.*
Multimode fiber-optic cabling carries signals from multiple sending devices.
Fiber-optic cabling uses LEDs for single-mode cab?les and laser technology for
multimode cables.
150. What is contained in the trailer of a data-link frame?
logical address
physical address
data
error detection*
151. Refer to the exhibit. A ping to PC3 is issued from PC0, PC1, and PC2 in this
exact order. Which MAC addresses will be contained in the S1 MAC address
table that is associated with the Fa0/1 port?
just PC0 and PC1 MAC addresses*

just the PC0 MAC address
PC0, PC1, and PC2 MAC addresses
152. How does a Layer 3 switch differ from a Layer 2 switch?
A Layer 3 switch supports VLANs, but a Layer 2 switch does not.
An IP address can be assigned to a physical port of a Layer 3 switch.
However, this is not supported in Layer 2 switches.*
A Layer 3 switch maintains an IP address table instead of a MAC address table.
A Layer 3 switch learns the MAC addresses that are associated with each of its
ports. However, a Layer 2 switch does not.
153. What is the purpose of the routing process?
to encapsulate data that is used to communicate across a network
to select the paths that are used to direct traffic to destination networks*
to convert a URL name into an IP address
to provide secure Internet file transfer
to forward traffic on the basis of MAC addresses
154. Which technology provides a solution to IPv4 address depletion by allowing
multiple devices to share one public IP address?
ARP
DNS
NAT*
SMB
DHCP
HTTP
155. Refer to the exhibit. Consider the IP address configuration shown from PC1.
What is a description of the default gateway address?
It is the IP address of the Router1 interface that connects the company to the
Internet.
It is the IP address of the Router1 interface that connects the PC1 LAN to
Router1.*
It is the IP address of Switch1 that connects PC1 to other devices on the same
LAN.
It is the IP address of the ISP network device located in the cloud.
156. Which of the following are primary functions of a router? (Choose two.)
packet switching*
microsegmentation
domain name resolution
path selection*
flow control
157. Which two statements correctly describe a router memory type and its
contents? (Choose two.)
ROM is nonvolatile and contains basic diagnostic software.*
FLASH is nonvolatile and contains a limited portion of the IOS.
ROM is nonvolatile and stores the running IOS.
RAM is volatile and stores the IP routing table.*
NVRAM is nonvolatile and stores other system files.
158. In which default order will a router search for startup configuration
information?
NVRAM, RAM, TFTP
NVRAM, TFTP, setup mode*
setup mode, NVRAM, TFTP
TFTP, ROM, NVRAM
flash, ROM, setup mode
159. What happens when part of an Internet VoIP transmission is not delivered to
the destination?
A delivery failure message is sent to the source host.
The part of the VoIP transmission that was lost is re-sent.
The entire transmission is re-sent.
The transmission continues without the missing portion.*
160. Which three IP addresses are private ? (Choose three.)
10.172.168.1*
172.32.5.2
192.167.10.10
172.20.4.4 *
192.168.5.254*
224.6.6.6
161. How many bits make up the single IPv6 hextet :10CD:?
4
8
16*
32
162. What is the effect of configuring the ipv6 unicast-routing command on a
router?
to assign the router to the all-nodes multicast group
to enable the router as an IPv6 router*
to permit only unicast packets on the router
to prevent the router from joining the all-routers multicast group
163. Which group of IPv6 addresses cannot be allocated as a host source
address?
FEC0::/10?
FDFF::/7?
FEBF::/10?
FF00::/8*
164. What is the purpose of ICMP messages?
to inform routers about network topology changes
to ensure the delivery of an IP packet
to provide feedback of IP packet transmissions*
to monitor the process of a domain name to IP address resolution
165. Refer to the exhibit. A technician has configured a user workstation with the
IP address and default subnet masks that are shown. Although the user can
access all local LAN resources, the user cannot access any Internet sites by
using either FQDN or IP addresses. Based upon the exhibit, what could account
for this failure?
The DNS server addresses are incorrect.

The default gateway address in incorrect.*
The wrong subnet mask was assigned to the workstation.
The workstation is not in the same network as the DNS servers.
166. A network administrator needs to monitor network traffic to and from
servers in a data center. Which features of an IP addressing scheme should be
applied to these devices?
random static addresses to improve security
addresses from different subnets for redundancy
predictable static IP addresses for easier identification*
dynamic addresses to reduce the probability of duplicate addresses
167. Refer to the exhibit. Which IP addressing scheme should be changed?
Site 1
Site 2*
Site 3
Site 4
168. Which two notations are useable nibble boundaries when subnetting in
IPv6? (Choose two.)
/62
/64*
/66
/68*
/70
169. A host PC has just booted and is attempting to lease an address through
DHCP. Which two messages will the client typically broadcast on the network?
(Choose two.)
DHCPDISCOVER*
DHCPOFFER
DHCPREQUEST*
DHCPACK
DHCPNACK
170. What is the purpose of the network security accounting function?
to require users to prove who they are
to determine which resources a user can access
to keep track of the actions of a user*
to provide challenge and response questions
171. Refer to the exhibit. The network administrator enters these commands into
the R1 router:
R1# copy running-config tftp
Address or name of remote host [ ]?
When the router prompts for an address or remote host name, what IP address
should the administrator enter at the prompt?
192.168.9.254
192.168.10.1
192.168.10.2
192.168.11.252*
192.168.11.254
172. Match the IPv6 address to the IPv6 address type. (Not all options are used.)
173. What two preconfigured settings that affect security are found on most new
wireless routers? (Choose two.)
broadcast SSID*
MAC filtering enabled
WEP encryption enabled
PSK authentication required
default administrator password*
174. Which type of wireless security generates dynamic encryption keys each
time a client associates with an AP?
EAP
PSK
WEP
WPA*
TFTP* is a best-effort, connectionless application layer protocol that is used to
transfer files.
176. Which two components are necessary for a wireless client to be installed on
a WLAN? (Choose two.)
media
wireless NIC*
custom adapter
crossover cable
wireless bridge
wireless client software*
177. Consider the following range of addresses:
2001:0DB8:BC15:00A0:0000::

2001:0DB8:BC15:00A1:0000::
2001:0DB8:BC15:00A2:0000::
…
2001:0DB8:BC15:00AF:0000::
The prefix-length for the range of addresses is /60*

178. Match the phases to their correct stage in the router bootup process. (Not
all options are used.)
179. A host is accessing an FTP server on a remote network. Which three

applying security settings to control the flow of data*
180. When is a dial-up connection used to connect to an ISP?
when a cellular telephone provides the service
when a high-speed connection is provided over a cable TV network
when a satellite dish is used
when a regular telephone line is used*
181. On a school network, students are surfing the web, searching the library
database, and attending an audio conference with their sister school in Japan. If
network traffic is prioritized with QoS, how will the traffic be classified from
highest priority to lowest priority?
audio conference, database, HTTP*
database, HTTP, audio conference
audio conference, HTTP, database
database, audio conference, HTTP
182. During normal operation, from which location do most Cisco routers run the
IOS?
RAM*
flash
NVRAM
disk drive
183. Which keys act as a hot key combination that is used to interrupt an IOS
process?
Ctrl-Shift-X
Ctrl-Shift-6*
Ctrl-Z
Ctrl-C
184. Refer to the exhibit. An administrator wants to change the name of a brand
new switch, using the hostname command as shown. What prompt will display
after the command is issued??
HR Switch(config)#?
Switch(config)#?*
HRSwitch(config)#?
HR(config)#?
Switch#
185. A technician uses the ping 127.0.0.1 command. What is the technician
testing?
the TCP/IP stack on a network host*
connectivity between two adjacent Cisco devices
connectivity between a PC and the default gateway
connectivity between two PCs on the same network
physical connectivity of a particular PC and the network
186. What is the correct order for PDU encapsulation?
187. Which device should be used for enabling a host to communicate with
another host on a different network?
switch
hub
router*
host
188. A network technician is measuring the transfer of bits across the company
backbone for a mission critical application. The technician notices that the
network throughput appears lower than the bandwidth expected. Which three
factors could influence the differences in throughput? (Choose three.)
the type of traffic that is crossing the network*
crossing*
189. Which characteristics describe fiber optic cable? (Choose two.)
It is not affected by EMI or RFI.*
Each pair of cables is wrapped in metallic foil.
It combines the technique of cancellation, shielding and twisting to protect data.
It has a maximum speed of 100 Mbps.
It is the most expensive type of LAN cabling*
190. What are two features of a physical, star network topology? (Choose two.)
It is straightforward to troubleshoot.*
End devices are connected together by a bus.
It is easy to add and remove end devices.*
All end devices are connected in a chain to each other.
Each end system is connected to its respective neighbor.
191. A frame is transmitted from one networking device to another. Why does the
receiving device check the FCS field in the frame?
to determine the physical address of the sending device
to verify the network layer protocol information
to compare the interface media type between the sending and receiving ends
to check the frame for possible transmission errors*
to verify that the frame destination matches the MAC address of the receiving
device
192. What will a Layer 2 switch do when the destination MAC address of a
received frame is not in the MAC table?
It initiates an ARP request.
It broadcasts the frame out of all ports on the switch.
It notifies the sending host that the frame cannot be delivered.
It forwards the frame out of all ports except for the port at which the frame
was received.*
193. Which parameter does the router use to choose the path to the destination
when there are multiple routes available?
the lower metric value that is associated with the destination network*
the lower gateway IP address to get to the destination network
the higher metric value that is associated with the destination network
the higher gateway IP address to get to the destination network
194. Which two statements describe the functions or characteristics of ROM in a
router? (Choose two.)
stores routing tables
allows software to be updated without replacing pluggable chips on the
motherboard
maintains instructions for POST diagnostics*
holds ARP cache
stores bootstrap program*
195. Which statement describes a characteristic of the Cisco router management
ports?
A console port is used for remote management of the router.
A console port is not used for packet forwarding.*
Serial and DSL interfaces are types of management ports.
Each Cisco router has a LED indicator to provide information about the status of
the management ports.
196. What happens when part of an Internet radio transmission is not delivered
to the destination?
The part of the radio transmission that was lost is re-sent.
197. What types of addresses make up the majority of addresses within the /8
block IPv4 bit space?
private addresses
public addresses*
multicast addresses
experimental addresses
198. Refer to the exhibit. What is the maximum TTL value that is used to reach
the destination www.cisco.com??
11
12
13*
14
199. A company has a network address of 192.168.1.64 with a subnet mask of
255.255.255.192. The company wants to create two subnetworks that would
contain 10 hosts and 18 hosts respectively. Which two networks would achieve
that? (Choose two.)
192.168.1.16/28
192.168.1.64/27*
192.168.1.128/27
192.168.1.96/28*
192.168.1.192/28
200. In a network that uses IPv4, what prefix would best fit a subnet containing
100 hosts?
/23
/24
/25*
/26
201. Which protocol supports rapid delivery of streaming media?
Transmission Control Protocol
Real-Time Transport Protocol*
Secure File Transfer Protocol
Video over Internet Protocol
202. Why would a network administrator use the tracert utility?
to determine the active TCP connections on a PC
to check information about a DNS name in the DNS server
to identify where a packet was lost or delayed on a network*
to display the IP address, default gateway, and DNS server address for a PC
203. Refer to the exhibit. What is the significance of the asterisk (*) in the
exhibited output?
The asterisk shows which file system was used to boot the system.
The asterisk designates which file system is the default file system.*
An asterisk indicates that the file system is bootable.
An asterisk designates that the file system has at least one file that uses that file
system.
204. Which WLAN security protocol generates a new dynamic key each time a
client establishes a connection with the AP?
EAP
PSK
WEP
WPA*
Point-to-point communications where both devices can transmit and receive on the
medium at the same time are known as full-duplex
206. Match each characteristic to the appropriate email protocol. (Not all options
are used.)
207. A host is accessing a Telnet server on a remote network. Which three

applying security settings to control the flow of data*
208. Refer to the exhibit. Which area would most likely be an extranet for the
company network that is shown?
area A
area B
area C*
area D
209. Three office workers are using the corporate network. The first employee
uses a web browser to view a company web page in order to read some
announcements. The second employee accesses the corporate database to
perform some financial transactions. The third employee participates in an
important live audio conference with other office workers in branch offices. If
QoS is implemented on this network, what will be the priorities from highest to
lowest of the different data types?
audio conference, financial transactions, web page*
financial transactions, web page, audio conference
audio conference, web page, financial transactions
financial transactions, audio conference, web page
Explain:
QoS mechanisms enable the establishment of queue management strategies that
enforce priorities for different categories of application data. Thus, this queuing
enables voice data to have priority over transaction data, which has priority over
web data.
210. During normal operation, from which location do most Cisco switches and
routers run the IOS?
RAM*
flash
NVRAM
disk drive
211. A network administrator is making changes to the configuration of a router.
After making the changes and verifying the results, the administrator issues the
copy running-config startup-config command. What will happen after this
command executes?
The configuration will be copied to flash.
The configuration will load when the router is restarted.*
The new configuration file will replace the IOS file.
The changes will be lost when the router restarts.
212. What information does the loopback test provide?
The TCP/IP stack on the device is working correctly.*
The device has end-to-end connectivity.
DHCP is working correctly.
The Ethernet cable is working correctly.
The device has the correct IP address on the network.
213. What happens when a switch receives a frame and the calculated CRC value
is different than the value that is in the FCS field?
The switch places the new CRC value in the FCS field and forwards the frame.
The switch notifies the source of the bad frame.
The switch drops the frame.*
The switch floods the frame to all ports except the port through which the frame
arrived to notify the hosts of the error.
214. Which destination address is used in an ARP request frame?
0.0.0.0
255.255.255.255
FFFF.FFFF.FFFF*
127.0.0.1
01-00-5E-00-AA-23
215. What is the auto-MDIX feature on a switch?
the automatic configuration of an interface for 10/100/1000 Mb/s operation
the automatic configuration of an interface for a straight-through or a
crossover Ethernet cable connection*
the automatic configuration of full-duplex operation over a single Ethernet copper
or optical cable
the ability to turn a switch interface on or off accordingly if an active connection is
detected
216. What are the two main components of Cisco Express Forwarding (CEF)?
(Choose two.)
adjacency tables*
MAC-address tables
routing tables
ARP tables
forwarding information base (FIB)*
217. Which statement describes the sequence of processes executed by a router
when it receives a packet from a host to be delivered to a host on another
network?
It receives the packet and forwards it directly to the destination host.
It de-encapsulates the packet, selects the appropriate path, and
encapsulates the packet to forward it toward the destination host*
It de-encapsulates the packet and forwards it toward the destination host.
It selects the path and forwards it toward the destination host.
218. Refer to the exhibit. Router R1 has two interfaces that were configured with
correct IP addresses and subnet masks. Why does the show ip route command
output not display any information about the directly connected networks??
The directly connected networks have to be created manually to be displayed in

the routing table.
The routing table will only display information about these networks when the
router receives a packet.
The no shutdown command was not issued on these interfaces.*
The gateway of last resort was not configured.
219. What happens when part of an Internet television transmission is not
delivered to the destination?
The part of the television transmission that was lost is re-sent.
220. Which three statements characterize the transport layer protocols? (Choose
three.)
TCP and UDP port numbers are used by application layer protocols.*
TCP uses port numbers to provide reliable transportation of IP packets.
UDP uses windowing and acknowledgments for reliable transfer of data.
TCP uses windowing and sequencing to provide reliable transfer of data.*
TCP is a connection-oriented protocol. UDP is a connectionless protocol.*
221. Which statement is true regarding the UDP client process during a session
with a server?
Datagrams that arrive in a different order than that in which they were sent
are not placed in order.*
A session must be established before datagrams can be exchanged.
A three-way handshake takes place before the transmission of data begins.
Application servers have to use port numbers above 1024 in order to be UDP
capable.
222. Which two components are configured via software in order for a PC to
participate in a network environment? (Choose two.)
MAC address
IP address*
kernel
shell
subnet mask*
223. Which two reasons generally make DHCP the preferred method of assigning
IP addresses to hosts on large networks? (Choose two.)
It eliminates most address configuration errors.*
It ensures that addresses are only applied to devices that require a permanent
address.
It guarantees that every device that needs an address will get one.
It provides an address only to devices that are authorized to be connected to the
network.
It reduces the burden on network support staff.*
224. What is the subnet address for the address 2001:DB8:BC15:A:12AB::1/64?
2001:DB8:BC15::0
2001:DB8:BC15:A::0*
2001:DB8:BC15:A:1::1
2001:DB8:BC15:A:12::0
225. What is the purpose of the network security authentication function?
to require users to prove who they are*
to determine which resources a user can access
to keep track of the actions of a user
to provide challenge and response questions
226. Which type of wireless security makes use of dynamic encryption keys each
time a client associates with an AP?
EAP
PSK
WEP
WPA*
227. Launch PT – Hide and Save PT.
Open the PT activity. Perform the tasks in the activity instructions and then fill in the
blank.
The Server0 message isb ”winner”
228. Which field in an IPv4 packet header will typically stay the same during its
transmission?
Packet Length
Destination Address*
Flag
Time-to-Live
229. Launch PT – Hide and Save PT
Open the PT Activity. Perform the tasks in the activity instructions and then
answer the question. Which IPv6 address is assigned to the Serial0/0/0 interface
on RT2?
2001:db8:abc:1::1
2001:db8:abc:5::1*
2001:db8:abc:5::2
2001:db8:abc:10::15
230. What must be configured to enable Cisco Express Forwarding (CEF) on
most Cisco devices that perform Layer 3 switching?
Manually configure next-hop Layer 2 addresses.
Issue the no shutdown command on routed ports.
CEF is enabled by default, so no configuration is necessary.*
Manually map Layer 2 addresses to Layer 3 addresses to populate the forwarding
information base (FIB).
231. What is the purpose of adjacency tables as used in Cisco Express
Forwarding (CEF)?
to populate the forwarding information base (FIB)
to maintain Layer 2 next-hop addresses*
to allow the separation of Layer 2 and Layer 3 decision making
to update the forwarding information base (FIB)
232. Which statement describes a characteristic of the network layer in the OSI
model?
It manages the data transport between the processes running on each host.
In the encapsulation process, it adds source and destination port numbers to the
IP header.
When a packet arrives at the destination host, its IP header is checked by the
network layer to determine where the packet has to be routed.
Its protocols specify the packet structure and processing used to carry the
data from one host to another.*
233. A user gets an IP address of 192.168.0.1 from the company network
administrator. A friend of the user at a different company gets the same IP
address on another PC. How can two PCs use the same IP address and still
reach the Internet, send and receive email, and search the web?
Both users must be using the same Internet Service Provider.
ISPs use Network Address Translation to change a user IP address into an
address that can be used on the Internet.*
ISPs use Domain Name Service to change a user IP address into a public IP
address that can be used on the Internet.
Both users must be on the same network.
234. Why does HTTP use TCP as the transport layer protocol?
to ensure the fastest possible download speed
because HTTP is a best-effort protocol
because transmission errors can be tolerated easily
because HTTP requires reliable delivery*
235. What is the valid most compressed format possible of the IPv6 address
2001:0DB8:0000:AB00:0000:0000:0000:1234?
2001:DB8:0:AB00::1234*
2001:DB8:0:AB::1234
2001:DB8::AB00::1234
2001:DB8:0:AB:0:1234
236. What field content is used by ICMPv6 to determine that a packet has
expired?
TTL field
CRC field
Hop Limit field*
Time Exceeded field
237. Which firewall technique blocks incoming packets unless they are
responses to internal requests?
port filtering
stateful packet inspection*
URL filtering
application filtering
238. A network technician is investigating network connectivity from a PC to a
remote host with the address 10.1.1.5. Which command issued on the PC will
return to the technician the complete path to the remote host?
trace 10.1.1.5
traceroute 10.1.1.5
tracert 10.1.1.5*
ping 10.1.1.5
To prevent faulty network devices from carrying dangerous voltage levels,
equipment must be grounded *correctly
240. What is a possible hazard that can be caused by network cables in a fire?
The cable insulation could be flammable.*
Users could be exposed to excessive voltage.
Network cables could be exposed to water.
The network cable could explode.
241. What device is commonly used to verify a UTP cable?
a multimeter
an Optical Time Domain Reflectometer
a cable tester*
an ohmmeter
242. What needs to be checked when testing a UTP network cable?
capacitance
wire map*
inductance
flexibility
243. Refer to the exhibit. A ping to PC2 is issued from PC0, PC1, and PC3 in this
exact order. Which MAC addresses will be contained in the S1 MAC address
table that is associated with the Fa0/1 port?
just PC0 and PC1 MAC addresses*

PC0, PC1, and PC2 MAC addresses
244. Which function is provided by TCP?
data encapsulation
detection of missing packets*
communication session control
path determination for data packets
245. What does a router use to determine where to send data it receives from the
network?
an ARP table
a routing table*
the destination PC physical address
a switching table
246. Which router interface should be used for direct remote access to the router
via a modem?
an inband router interface
a console port
a serial WAN interface
an AUX port*
247. A technician is configuring a router to allow for all forms of management
access. As part of each different type of access, the technician is trying to type
the command login. Which configuration mode should be entered to do this
task?
user executive mode
global configuration mode
any line configuration mode*
privileged EXEC mode
248. Which three statements characterize the transport layer protocols? (Choose
three.)
TCP and UDP port numbers are used by application layer protocols.*
TCP uses port numbers to provide reliable transportation of IP packets.
UDP uses windowing and acknowledgments for reliable transfer of data.
TCP uses windowing and sequencing to provide reliable transfer of data.*
TCP is a connection-oriented protocol. UDP is a connectionless protocol.*
249. Refer to the exhibit. A TCP segment from a server has been captured by
Wireshark, which is running on a host. What acknowledgement number will the
host return for the TCP segment that has been received?
2
21
250
306*
2921
250. Which statement is true about an interface that is configured with the IPv6
address command?
IPv6 traffic-forwarding is enabled on the interface.
A link-local IPv6 address is automatically configured on the interface.*
A global unicast IPv6 address is dynamically configured on the interface.
Any IPv4 addresses that are assigned to the interface are replaced with an IPv6
address.
251. Refer to the exhibit. An administrator must send a message to everyone on
the router A network. What is the broadcast address for network 172.16.16.0/22?
172.16.16.255
172.16.20.255
172.16.19.255*
172.16.23.255
172.16.255.255
252. A network administrator is variably subnetting a given block of IPv4
addresses. Which combination of network addresses and prefix lengths will
make the most efficient use of addresses when the need is for 2 subnets capable
of supporting 10 hosts and 1 subnet that can support 6 hosts?
10.1.1.128/28
10.1.1.144/28
10.1.1.160/29*
10.1.1.128/28
10.1.1.144/28
10.1.1.160/28
10.1.1.128/28
10.1.1.140/28
10.1.1.158/26
10.1.1.128/26
10.1.1.144/26
10.1.1.160/26
10.1.1.128/26
10.1.1.140/26
10.1.1.158/28
253. How many additional bits should be borrowed from a /26 subnet mask in
order to create subnets for WAN links that need only 2 useable addresses?
2
3
4*
5
6
254. A network administrator requires access to manage routers and switches
locally and remotely. Match the description to the access method. (Not all
options are used.)
255. Refer to the exhibit. The administrator configured the access to the console
and the vty lines of a router. Which conclusion can be drawn from this
configuration?
Unauthorized individuals can connect to the router via Telnet without entering a
password.
Because the IOS includes the login command on the vty lines by default,
access to the device via Telnet will require authentication.*
Access to the vty lines will not be allowed via Telnet by anyone.
Because the login command was omitted, the password cisco command is not
applied to the vty lines.
256. An administrator issued the service password-encryption command to
apply encryption to the passwords configured for enable password, vty, and
console lines. What will be the consequences if the administrator later issues the
no service password-encryption command?
It will remove encryption from all passwords.
It will reverse only the vty and console password encryptions.
It will not reverse any encryption.*
It will reverse only the enable password encryption.
257. After making configuration changes, a network administrator issues a copy
running-config startup-config command in a Cisco switch. What is the result of
issuing this command?
The new configuration will be stored in flash memory.
The new configuration will be loaded if the switch is restarted.*
The current IOS file will be replaced with the newly configured file.
The configuration changes will be removed and the original configuration will be
restored.
258. What are two features of ARP? (Choose two.)
If a host is ready to send a packet to a local destination device and it has
the IP address but not the MAC address of the destination, it generates an ARP
broadcast.*
An ARP request is sent to all devices on the Ethernet LAN and contains the IP
address of the destination host and its multicast MAC address.
When a host is encapsulating a packet into a frame, it refers to the MAC address
table to determine the mapping of IP addresses to MAC addresses.
If no device responds to the ARP request, then the originating node will broadcast
the data packet to all devices on the network segment.
If a device receiving an ARP request has the destination IPv4 address, it
responds with an ARP reply.*
259. A network administrator is enabling services on a newly installed server.
Which two statements describe how services are used on a server? (Choose
two.)
Data sent with a service that uses TCP is received in the order the data was sent.
A port is considered to be open when it has an active server application that
is assigned to it.*
An individual server can have two services that are assigned to the same port
number.
An individual server cannot have multiple services running at the same time.
Server security can be improved by closing ports that are associated with
unused services.*
260. Given the binary address of 11101100 00010001 00001100 00001010, which
address does this represent in dotted decimal format?
234.17.10.9
234.16.12.10
236.17.12.6
236.17.12.10*
261. A particular telnet site does not appear to be responding on a Windows 7
computer. What command could the technician use to show any cached DNS
entries for this web page?
ipconfig /all
arp -a
ipconfig /displaydns*
nslookup
Network devices come in two physical configurations. Devices that have
expansion slots that provide the flexibility to add new modules have a Modular *
configuration.
263. Refer to the exhibit. What is the maximum TIL value that is used to reach the
destination www.cisco.com?
11
12
13*
14
264. Which statement is true about DHCP operation?
When a device that is configured to use DHCP boots, the client broadcasts
a DHCPDISCOVER message to identify any available DHCP servers on the
network.*
A client must wait for lease expiration before it sends another DHCPREOUEST
message.
The DHCPDISCOVER message contains the IP address and sub net masK to be
assigned, the IP address of the DNS server, and the IP address of the default
gateway.
If the client receives several DHCPOFFER messages from different servers, it
sends a unicast DHCPREOUEST message to the server from which it chooses to
obtain the IP information.
265. Which type of wireless security is easily compromised?
EAP
PSK
WEP*
WPA
266. A network administrator notices that the throughput on the network appears
lower than expected when compared to the end-to-end network bandwidth.
Which three factors can explain this difference? (Choose three.)
the amount of traffic*
the type of data encapsulation in use
the type of traffic*
the number and type of network devices that the data is crossing*
the bandwidth of the connection to the ISP
the reliability of the network backbone
267. A host PC is attempting to lease an address through DHCP. What message
is sent by the server to the client know it is able to use the provided IP
information?
DHCPDISCOVER
DHCPOFFER*
DHCPPREQUEST
DHCPACK
DHCPNACK
268. A network administrator is configuring access control to switch SW1. If the
administrator uses console line to connect to the switch, which password is
needed to access user EXEC mode?
letmein
secretin
lineconin*
linevtyin
Explain:
269. How many bits would need to be borrowed if a network admin were given
the IP addressing scheme of 172.16.0.0/16 and needed no more than 16 subnet
with equal number of hosts?
10
12
2
4*
8
270. Question:
It will give 4 options about ping, the correct one is:

The PC2 will be able to ping 192.168.1.1*
271. Which statement best describes the operation of the File Transfer Protocol?
An FTP client uses a source port number of 21 and a randomly generated
destination port number during the establishment of control traffic with an FTP
Server.
An FTP client uses a source port number of 20 and a randomly generated
destination port number during the establishment of data traffic with an FTP Server.
An FTP server uses a source port number of 20 and a randomly generated
destination port number during the establishment of control traffic with an FTP
client.*
An FTP server uses a source port number of 21 and a randomly generated
destination port number during the establishment of control traffic with an FTP client.
272. A client is establishing a TCP session with a server. How is the
acknowledgment number in the response segment to the client determined?
The acknowledgment number field is modified by adding 1 to the randomly
chosen initial sequence number in response to the client.*
The acknowledgment number is set to 11 to signify an acknowledgment packet
and synchronization packet back to the client.
The acknowledgment number field uses a random source port number in
response to the client.
The acknowledgment number is set to 1 to signify an acknowledgment packet
back to the client.
273. Why does layer 3 device perform the ANDing process on a destination IP
and subnet Mask?
to identify host address and destination host;
to identify network address of destination host;*
to identify faulty frames;
to identify broadcast address of destination network;
274. There was also a question about if you activated service password
encryption in the past and you prompt “no service password encryption” what
password are modified ?
no password at all;*
password of the lines are in clear;
login password;
?
275. What type of communication rule would best describe CSMA/CD?
message encapsulation
flow control
message encoding
access method*
276. What is the primary reason to subnet IPv6 prefixes?
to conserve IPv6 addresses
to avoid wasting IPv6 addresses
to conserve IPv6 prefixes
to create a hierarchical Layer 3 network design*
277. Which statement describes data throughput?
It is the measure of the bits transferred across the media under perfect conditions.
It is the measure of the bits transferred across the media over a given
period of time.*
It indicates the capacity of a particular medium to carry data.
It is the guaranteed data transfer rate offered by an ISP.
278. Fill in the blank. Use a number.
IPv4 multicast addresses are directly mapped to IEEE 802 (Ethernet) MAC addresses
using the last ___4___ of the 28 available bits in the IPv4 multicast group address.
279. How could a faulty network device create a source of hazard for a user?
(Choose two.)
It could stop functioning.*
It could apply dangerous voltage to other pieces of equipment.
It could explode.*
It could produce an unsafe electromagnetic field.
It could apply dangerous voltage to itself.
280. What are three important considerations when planning the structure of an
IP addressing scheme? (Choose three.)
preventing duplication of addresses*
providing and controlling access*
documenting the network
monitoring security and performance
conserving addresses*
implementing new services
281. What is the metric value that is used to reach the 10.1.1.0 network in the
following routing table entry? D 10.1.1.0/24 [90/2170112] via 209.165.200.226,
00:00:05, Serial0/0/0
24
90
05
2170112*
282. Which two services or protocols use the preferred UDP protocol for fast
transmission and low overhead? (Choose two)
VoIP*
DNS*
HTTP
FTP
POP3
New Questions (v6.0):

283. What action does a DHCPv4 client take if it receives more than one
DHCPOFFER from multiple DHCP servers?
It sends a DHCPREQUEST that identifies which lease offer the client is
accepting.*
It sends a DHCPNAK and begins the DHCP process over again.
It discards both offers and sends a new DHCPDISCOVER.
It accepts both DHCPOFFER messages and sends a DHCPACK.
284. To what legacy address class does the address 10.0.0.0 belong?
Class B
Class D
Class A*
Class C
Class E
285. How many IPv4 addresses are available to be assigned to hosts on a
network that has a mask of 255.255.255.248?
16
14
8
254
6*
2
286. What type of communication medium is used with a wireless LAN
connection?
radio waves*
fiber
microwave
UTP
287. Which method of IPv6 prefix assignment relies on the prefix contained in RA
messages?
EUI-64
static
SLAAC*
stateful DHCPv6
288. What is a characteristic of DNS?
DNS servers can cache recent queries to reduce DNS query traffic.*
DNS servers are programmed to drop requests for name translations that are not
within their zone.
All DNS servers must maintain mappings for the entire DNS structure.
DNS relies on a hub-and-spoke topology with centralized servers.
289. What is the prefix for the host address 2001:DB8:BC15:A:12AB::1/64?
2001:DB8:BC15
2001:DB8:BC15:A*
2001:DB8:BC15:A:1
2001:DB8:BC15:A:12
290. What information is maintained in the CEF adjacency table?
Layer 2 next hops
MAC address to IPv4 address mappings*
IP address to interface mappings
the IP addresses of all neighboring routers
291. Which command can an administrator issue on a Cisco router to send
debug messages to the vty lines?
terminal monitor*
logging console
logging buffered
logging synchronous
Explain:
monitor command.
292. What is an example of a top-level domain?

root.cisco.com
http://www.cisco.com
.com*
cisco.com
Explain:
Top-level domains represent a country or type of organization, such as .com or
.edu.
293. Which protocol requires the establishment of a session between sender and
receiver hosts prior to transmitting data?
UDP
TCP*
IP
ICMP
294. Which two protocols operate at the top layer of the TCP/IP protocol suite?
(Choose two.)
TCP
IP
UDP
POP
DNS
Ethernet
295. What does a client do when it has UDP datagrams to send?
It sends to the server a segment with the SYN flag set to synchronize the
conversation.
It just sends the datagrams.*
It queries the server to see if it is ready to receive data.
It sends a simplified three-way handshake to the server.
296. What is a characteristic of multicast messages?
They are sent to all hosts on a network.
They must be acknowledged.
They are sent to a select group of hosts.*
They are sent to a single destination.
297. Which protocol or service uses UDP for a client-to-server communication
and TCP for server-to-server communication?
FTP
HTTP
DNS *
SMTP
298. In what networking model would eDonkey, eMule, BitTorrent, Bitcoin, and
LionShare be used?
master-slave
client-based
peer-to-peer *
point-to-point
196 Leave a Reply
Join the discussion...
95  101  16  

 127
 newest  oldest  most voted

Nicola  
Are this Final exam answer good for the new 200-301 CCNA certification?
Guest
Thanks
 0   Reply  18 days ago 
CCNA Questions Answers  
Srr, we have not updated for 200-301 Exam

Author
 0  Reply  18 days ago
shezga  
Have questions been updated for version 7?

Guest
Sorry, we have not updated version 7 yet

Author
Mo518  
Hallo,Chef. Meine Frage wäre was ich lernen sollte, da ich am 07.01.20 meine
Guest Abschlussprüfung schreibe und ich nicht weiß was genau welches CCNA wir
lernen. Ich weiß, dass es V6.0 ist aber mehr auch nicht. Kannst du mir da bitte
weiter helfen.
Haben Sie ein Netacad-Konto?

Author
 0  Reply  22 days ago 
Mo518  
Ja
Guest
Dan  
Hi, where can I test my knowledge for these 298 questions? (where can I find
Guest online test)
 0   Reply  1 month ago 
You just need to learn sessions: “Version 6.0” and “New Questions (v6.0)”
Author
 0  Reply  1 month ago 
Dan  
Do you have an online test for version 5.1(final exam)

Guest
 0  Reply  1 month ago
Anthony McLaughlin  
Sorry last question if i was to take the first part being the ICND1 100-105 which
Guest parts on here do i study?
many thanks
For ICND 1, you need to learn CCNA 1 and CCNA 2:

Author
https://itexamanswers.net/ccna-1-introduction-to-networks-v5-1-v6-0-exams-
answers
https://itexamanswers.net/ccna-2-routing-switching-essentials-v5-0-3-v6-0-exam-
answers
https://itexamanswers.net/ccna-2-v6-0-ccent-icnd1-practice-certification-exam-
answers.html
That’s great thank you very much i will focus on CCNA1 and CCNA2
Guest
Hi i’m booking my exam ccna 200-120 switching and routing for January 2020 am
Guest i write in thinking to study version 6 Q1 – Q130???
Study the questions here to pass the 200-125 exam:

Author
https://itexamanswers.net/cisco-ccna-v3-0-200-125-study-guide-exam-dumps-
vce-pdf-latest.html
GUEST  
Hi, can I ask what is meant by CCNA 200-125 exam? Is it same with the final
Guest exam CCNA R&S?
CCNA 200-125 Exam (Cert): https://itexamanswers.net/cisco-ccna-v3-0-200-125-

Author
study-guide-exam-dumps-vce-pdf-latest.html
tom  
Hi guys, I’m preparing CCNA 200-125. Am I supposed to finish final exams on

Guest CCNA 1, 2, 3, 4 sections this website to pass it? Is it enough?

Author And: https://itexamanswers.net/cisco-ccna-v3-0-200-125-study-guide-exam-
dumps-vce-pdf-latest.html
tom  
I appreciate! You mean these final exams and the sections on link are
Guest
enough right?
AL-Amin  
Hi GUYS, Please if anyone going to do the ICND1 Exam don’t entirely depend on
Guest this question because I did and hoping exact question will come but to my
surprise none of it came so I fail. It is a good site to test your understanding on
the overall subject area but please don’t depend on it for your ICND1 exams. I did
my ICND1 this morning on the 07/12/2019. I think it is outdated
I’m sorry, this article is only for the CCNA Final exam, we will update ICND exam
Author
as soon as possible.
Leo  
Is the pdf version also actual or is just the website on the newest stand?
Guest
Click button Print-PDF-Email above post to download pdf full questions

Author
GEOMAR  
GOSTEI DO MATERIAL POSTADO, PENSO NO FUTURO TIRA ESSA

Guest CERTIFICAÇÃO
 0   Reply  1 month ago
Tesnime  
Hello , i’m going to take “Introduction to networks ” exam next week , is version
Guest 5.1 included? or should I only learn v6 and the new questions?
OED  
i had my first final lab today and thank you i have 94% right. I love you and pls
Guest keep going with this side i have 3 final labs still to go XD
Cella  
Guest
this is totally legit!…use this site and passed my 200-125 exam yesterday…thank
you very much! Keep it up!
Thank you for your feedback!

Author
Hey celia
Guest
what parts did you focus on version 6 Questions 1 to Q130??
Study the questions here to pass the 200-125 exam:

Author
https://itexamanswers.net/cisco-ccna-v3-0-200-125-study-guide-exam-
dumps-vce-pdf-latest.html
patty  
I have the exam of the first module ccna R&S next week, which questions should
Guest interest me? a part or all?
 0   Reply  2 months ago 
You just need to learn version 6 & new question

Author
 1  Reply  2 months ago 
patty  
hi, I’m studying the new version of the CCNA R and S, the first two
Guest
modules will remain unchanged, while the last two modules will have new
topics according to the rules that Cisco has established since 2020; and
obviously until January we still don’t know how the last two modules will be
incorporated, not even my teachers in netacad still know how the last two
modules will be incorporated. do you know anything about it?
CCNA version 7 has not been released, so we do not have much

Author
information about it. We will try to update as soon as there is official
information.
patty  
I count on you =D thx

Guest
 0  Reply  2 months ago
Alma  
What are new questions?

Guest
New questions are contributed: from Q283 to Q298

Author
Buddy  
I am confused what are these version thing? v5.1, v6.0? I want to write exam
Guest before structure changes but when I visited this site I got confused. I am looking
for 200-125 exam.
Please someone explain. thank you.
maltatea  
You can check what version it is by going to the modules, click on any exam as if
Guest
you were to take it, and at the top of the page it’s gonna say something like
“(Version 6.00)”
PLUR  
Hi… can someone tell me how many questions have CCNA 1 Final Exam and
Guest how much time we have to answer it ? Thank you!
there will be 3 exam sets, 54 questions/exam – 75min.

Author
PLUR  
if i understand good, there will be 3 combinations of exam that can be

Guest
given… but only 1 with 54 questions is Final Exam ? Now depends what
combination i will get… i can get one combination, but guy next to me can
get other combination ? Thank you…
David  
Hi , I am learning the version 7 of CCNA 2019.

Guest Which of these questions if for v7?
BOB  
none are version 7 but how do you know that you are studying version 7! I can’t
Guest
find anything on google about it. from what i can tell it dose not exist at all, at
least not until 2020 I think.
Alice  
Hi, where can I see which version of CCNA I’m learning?

Guest
bob  
In the Netacad Cisco and than click on the course that you did also on the right
Guest
hand side of the screen of this website is the index. It’s up to you to do the rest,
fail or not is up to you, so get over it and on it!
Bob  
Hi this very well done thank you so much. But I was wondering, can you please
Guest post me a link to the CCNA Routing and Switching, Introduction to Networks
version 6, just version 6 only please and not 5.1+6.0 and only version 6 as of
2019 instead of the 2016 as well please? It would mean the world to me because
i can not find it anywhere for myself thanks you so much! sorry
Q1 to Q130: Version 6
Author
Q131 to Q270: Version 5
Q271 to end: New questions (v6)
Good luck!
Bob  
Right thank you so much! I’ll get to work studying this out tommroww.
Guest
Thank you so much I’m very tired right now.
Alice  
My final exam will be on December 2nd 2019. Will the questions be the same?
Guest Normally, the CCNA1 that I’m studying says CCNA 2020, so it means that the
final exam of December 2nd 2019 will be the final exam 2019(your version) or
another one of 2020?
Which version of CCNA are you learning? Version 6 or Version 7?

Author
Alice  
It says: CCNA 1 2020

Guest
(13 Sept 2019 – 28 Feb 2020)

CCNA 1 Final Exam Answers 2019 (v5.1+v6.0) Introduction To Networks

Uploaded by

Copyright:

Available Formats

CCNA 1 Final Exam Answers 2019 (v5.1+v6.0) Introduction To Networks

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CCNA 1 Final Exam Answers 2019 (v5.1+v6.0) Introduction To Networks

Uploaded by

Copyright:

Available Formats

IOS Commands Help Resources » Download Cisco Packet Tracer » IP Subnet Calculators » Donations

Search the site 

CCNA 1 Final Exam Answers 2019 (v5.1+v6.0)

 Share  Tweet  Share  Pin it  Reddit

4.3 / 5 ( 173 votes )

3. What is a benefit of using cloud computing in networking?

4. What is the function of the shell in an OS?

5. Which connection provides a secure CLI session with encryption to a Cisco

6. A network technician is attempting to configure an interface by entering the

7. An administrator uses the Ctrl-Shift-6 key combination on a switch after

8. Refer to the exhibit. A network administrator is configuring access control to

11. What is an advantage to using a protocol that is defined by an open

14. Which name is assigned to the transport layer PDU?

16. A network administrator is troubleshooting connectivity issues on a server.

17. Which type of UTP cable is used to connect a PC to a switch port?

18. A network administrator is measuring the transfer of bits across the

19. What is a characteristic of UTP cabling?

20. What are two characteristics of fiber-optic cable? (Choose two.)

21. What is a characteristic of the LLC sublayer?

22. A network team is comparing physical WAN topologies for connecting

23. What method is used to manage contention-based access on a wireless

25. What will a host on an Ethernet network do if it receives a frame with a

30. What addresses are mapped by ARP?

31. What information is added during encapsulation at OSI Layer 3?

35. What are two functions of NVRAM? (Choose two.)

The administrator will be required to enter Cisco123.

37. What is the dotted decimal representation of the IPv4 address

40. What purpose does NAT64 serve in IPv6?

41. What is the most compressed representation of the IPv6 address

42. Which range of link-local addresses can be assigned to an IPv6-enabled

There is connectivity between this device and the device at 192.168.100.1.*

45. What type of IPv6 address is FE80::1?

55. Which statement is true about variable-length subnet masking?

58. What is the TCP mechanism used in congestion avoidance?

59. Which scenario describes a function provided by the transport layer?

60. A user opens three browsers on the same PC to access www.cisco.com to

63. Which three statements characterize UDP? (Choose three.)

64. What is a key characteristic of the peer-to-peer networking model?

66. Which domain name would be an example of a top-level domain?

70. Which example of malicious code would be classified as a Trojan horse?

72. A network technician suspects that a particular network connection between

user EXEC mode

FastEthernet0/0 -> packets with destination of 172.17.6.15

82. After making configuration changes on a Cisco switch, a network

83. Refer to the exhibit. A network administrator is configuring access control to

physical topology diagram

87. What layer is responsible for routing messages through an internetwork in

88. Which statement accurately describes a TCP/IP encapsulation process when

93. If a device receives an Ethernet frame of 60 bytes, what will it do?

95. Which switching method has the lowest level of latency?

99. At a minimum, which address is required on IPv6-enabled interfaces?

101. What is the purpose of the command ping ::1?

104. When IPv4 addressing is manually configured on a web server, which

108. What is the function of the HTTP GET message?

111. A network engineer is analyzing reports from a recently performed network

114. Which command can an administrator issue on a Cisco router to send

115. Fill in the blank.

The banner message is too long.