Technical Data Sheet (TDS)
o
PUMA MOTOR OIL SAE 30 o
o
Anti-wear protection
Oxidation resistance
Anti-foam performance
Heavy duty diesel engine oil
Puma Monograde Motor Oils are high quality lubricating oils specially developed for use in all types of for high
output normally-aspirated diesel engines operating under very severe duty or which are subject to deposit
formation or excessive wear due to design characteristics or to the fuel employed. These oils are treated with a
large percentage of additives to impart superior detergency together with high dispersant, anti-oxidant, anti-
corrosion, anti-wear and anti-foam properties.
Designed to Perform irregularities in performance and other problems
arising from the compressibility of air bubbles.
Anti-wear Protection – Longer Equipment Life
Proven Anti Wear Additive packages provide greater Low Pour Point - Easy Start Up
resistance to sliding wear thus ensuring efficiency Allows for easy start-up of diesel engines even at low
and long life of all moving parts of which greatly temperatures, without circulation or regulation
reduce the need for engine servicing and overhauls. problems.
Oxidation Resistance - Longer Oil Life Anti-corrosion & Anti-rust Properties
It has extremely good oil life and lubricant stability It has particularly good anticorrosion properties
even when subjected to unusually high thermal which effectively protect the engine from corrosion
stresses; this property minimizes sludge and deposit from combustion moisture and acids. These
formation, thus preventing blocking of ports, valves additives inhibit the oxidation of internal surfaces of
and controls, while guaranteeing that the oil remains the engine and therefore prevent operating
properly fluid. Maintenance costs are therefore difficulties and breakdown of the oil caused by
reduced and the useful service life of the oil is metallic oxides that would otherwise form within the
extended. engine.
High Detergency – Increased Engine Cleanliness Demulsibility – Engine Life Extension
It has excellent detergency properties, making it Prevents the formation of water in oil emulsion
particularly suitable for use in supercharged engines. which enters the system through leakage or
It also has high dispersant properties. The lubricant is condensation. The fluids therefore maintain their
thus very resistant to the formation of lacquer and lubricating power and anticorrosion performance
varnish, as well as sludge and other engine deposits. even under these circumstances.
It helps prevent ring sticking and keeps pistons clean,
while maintaining soot deposits in suspension ready Puma Motor Oil SAE 30
to be filtered. Meets the requirements of the following
specifications:
Antifoam – Increased Performance - API : CF-4/SJ
Easy release of entrained air which will prevent - Allison C-3
difficulties with pumps and controls which can cause
Puma Energy South Africa The information contained herein is accurate at the time of this
3rd Floor, 15 Alice Lane review. However specifications change from time to time. Ensure
Sandton 2146 specifications meet equipment manufacture requirements.
Johannesburg, South Africa
Tel: +27 11 343 6970 Document No: 21102 – 21/10/2016
[email protected] 1 of 2 Printed Copies are UNCONTROLLED
Technical Data Sheet (TDS)
Typical Physical Characteristics
Property Temp Units Test Methods SAE 30
Viscosity Grade SAE 30
Kinematic Viscosity @ 40°C cSt ASTM D445 88.7
Kinematic Viscosity @ 100°C cSt ASTM D445 11.8
Viscosity Index ASTM D4292 105
Flash Point (COC) °C ASTM D92 230
Pour Point °C ASTM D97 -21
Density @ 15 °C kg/m3 ASTM 4052 0.890
These characteristics are typical of current product methods whilst future production will conform to
Puma Lubricants specifications, variations in these physical characteristics may occur.
Health & Safety Environment
• This product is unlikely to present any significant health and safety hazard when properly used
in the recommended application and good standards of personal hygiene are maintained.
• Avoid contact with eyes and skin, use proper impervious gloves with used oil. After skin
contact, wash immediately with soap and water. Guidance on health and safety is available on
the appropriate Material Safety Data Sheet (MSDS) which can be obtained from
[email protected] Protect the Environment
• Take used oil to an authorized collection point. Do not discharge used or new oil into drains,
soil or water.
Additional Information
• Technical advice on any applications not covered here may be obtained from your Puma
Energy Representative.
Puma Energy South Africa The information contained herein is accurate at the time of this
3rd Floor, 15 Alice Lane review. However specifications change from time to time. Ensure
Sandton 2146 specifications meet equipment manufacture requirements.
Johannesburg, South Africa
Tel: +27 11 343 6970 Document No: 21102 – 21/10/2016
[email protected] 2 of 2 Printed Copies are UNCONTROLLED
